aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/regulator
AgeCommit message (Collapse)AuthorFilesLines
2012-05-20regulator: tps65910: add error message in case of failureLaxman Dewangan1-4/+8
Prints error message whenever there is failure on resource allocation. Also used dev_* to print messages instead of pr_* Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps62360: dt: initialize of_node param for regulator register.Laxman Dewangan1-0/+1
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Regulator stores this of_node value in rdev->dev.of_node and used for lookup when client ask for regulator_get(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20mfd: Make anatop register accessor more flexible and rename meaningfullyRichard Zhao1-10/+8
- rename to anatop_read_reg and anatop_write_reg - anatop_read_reg directly return reg value - anatop_write_reg write reg with mask Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Convert wm831x to irq_domainMark Brown3-15/+23
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Commonize tps65910 regmap access through headerRhyland Klein1-46/+42
This change removes the read/write callback functions in favor of common regmap accessors inside the header file. This change also makes use of regmap_read/write for single register access which maps better onto what this driver actually needs. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-19regulator: tps65910: use devm_* for memory allocationLaxman Dewangan1-18/+9
use the devm_* apis for memory allocation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: tps65910: use small letter for regulator namesLaxman Dewangan1-52/+52
Use the small-letter for names of different regulator to match the names with dt binding documents. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: regulator for Palmas KconfigGraeme Gregory2-0/+13
Add the Kconfig/Makefile stuff for the palmas regulator driver Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: regulator driver for Palmas series chipsGraeme Gregory1-0/+822
Palmas has both Switched Mode (SMPS) and Linear (LDO) regulators in it. This regulator driver allows software control of these regulators. The regulators available on Palmas series chips vary depending on the muxing. This is handled automatically in the driver by reading the mux info from OTP. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: Enable Device Tree for the db8500-prcmu regulator driverLee Jones1-7/+69
Here we use the previous regulator register code separated from probe to register each of the regulators mentioned in Device Tree. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: db8500-prcmu: Separate regulator registration from probeLee Jones1-27/+44
This will provide us with a convenient way to register regulators when booting with Device Tree both enabled & disabled and will save us a great deal of code duplication in time. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: ab3100: Use regulator_map_voltage_iterate()Axel Lin1-34/+1
regulator_map_voltage_iterate() is for drivers implementing set_voltage_sel() and list_voltage() to use it as their map_voltage() operation. In this case, regulator_map_voltage_iterate() happen to be doing the same thing as ab3100_get_best_voltage_index() function. So we can use it to replace ab3100_get_best_voltage_index() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: tps65217: Convert to set_voltage_sel and map_voltageAxel Lin1-38/+30
Convert tps65217_pmic_ops to use set_voltage_sel and map_voltage. After this convertion, we can also use tps65217_pmic_set_voltage_sel() for set_voltage_sel callback of tps65217_pmic_ldo1_ops. Thus this patch also removes tps65217_pmic_ldo1_set_voltage_sel() function. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: Enable the ab8500 for Device TreeLee Jones1-0/+54
Here we setup the ab8500 regulator driver for DT. We first do this in the normal way, by providing a match structure during initialisation, but then we provide information so that whilst probing we can use existing data structures to do DT look-ups. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-18regulator: ab8500: Split up probe() into manageable piecesLee Jones1-63/+87
ab8500's probe() function is becoming quite large, so in the lead up to Device Tree enablement which will fork the thread of execution this patch splits it into 3 main areas; basic error checking will remain in probe(), but regulator register initialisation and regulator registration have been moved to their own functions which will be called in sequence by probe() and the DT equivalent. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_infoAxel Lin1-12/+0
This driver has been converted to use regulator_map_voltage_linear and set_voltage_sel now. regulator_map_voltage_linear will check the the voltage falls within specified range. The check_range() function and max_uV field are not used now, remove them. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17regulator: max8649: Remove unused check_range() functionAxel Lin1-10/+0
This driver has been converted to use regulator_map_voltage_linear and set_voltage_sel now. regulator_map_voltage_linear will check the the voltage falls within specified range. The check_range() function is not used, remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-17regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_infoAxel Lin1-4/+0
This driver has been converted to set_voltage_sel and regulator_map_voltage_linear. regulator_map_voltage_linear will check the voltage falls within specified range. The max_uV field is not used now, remove it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: da9052: Convert to set_voltage_sel and map_voltageAxel Lin1-13/+24
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: max8952: Use devm_kzallocAxel Lin1-8/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: isl6271a: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin1-15/+6
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: isl6271a: Convert to get_voltage_selAxel Lin1-12/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-16regulator: isl6271a: Use regulator_list_voltage_linear()Axel Lin1-6/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: max8660: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin1-56/+15
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: max8660: Convert to get_voltage_selAxel Lin1-11/+12
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: max8660: Convert to regulator_list_voltage_linear()Axel Lin1-27/+16
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: da903x: Kill da903x_[get|set]_[ldo12|ldo14]_voltage_sel() functionsAxel Lin1-67/+6
Now the implementation of da903x_set_voltage_sel, da9030_set_ldo14_voltage_sel, and da9034_set_ldo12_voltage_sel are exactly the same. da903x_get_voltage_sel, da9030_get_ldo14_voltage_sel and da9034_get_ldo12_voltage_sel are exactly the same. So we can use da903x_[get|set]_voltage_sel and kill other functions. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: da903x: Convert to set_voltage_sel and map_voltageAxel Lin1-56/+54
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-15regulator: da903x: Convert to regulator_list_voltage_linear()Axel Lin1-33/+21
Use regulator_list_voltage_linear() to replace da903x_list_voltage(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: support force PWM mode via regulator modeLaxman Dewangan1-37/+65
Change the mechanism of enabling the force PWM mode through regulator set mode. This can be dynamically configured now. In the REGULATOR_MODE_FAST the force PWM is enabled and in REGULATOR_MODE_NORMAL the force PWM is disabled. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: rc5t583: Convert to regulator_set_voltage_sel_regmap and regulator_map_voltage_linearAxel Lin1-27/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: rc5t583: Convert to regulator_list_voltage_linear()Axel Lin1-19/+9
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8649: Convert to regulator_set_voltage_sel_regmap and regulator_map_voltage_linearAxel Lin1-20/+2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8649: Convert to regulator_list_voltage_linear()Axel Lin1-7/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8649: Use regulator_get_voltage_sel_regmap()Axel Lin1-29/+16
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8649: Convert to get_voltage_selAxel Lin1-3/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: Fix build error due to missing semicolonAxel Lin1-1/+1
Fix below build error: CC [M] drivers/regulator/tps62360-regulator.o drivers/regulator/tps62360-regulator.c:351:1: error: expected ',' or ';' before 'extern' make[2]: *** [drivers/regulator/tps62360-regulator.o] Error 1 make[1]: *** [drivers/regulator] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: wm8994: Allow registration with no platform dataMark Brown1-4/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: core: Don't open code _regulator_is_enabled()Mark Brown1-3/+2
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-05-14regulator: wm831x-dcdc: Add missing checks for pdata before useMark Brown1-2/+3
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8925: Convert to set_voltage_sel() and map_voltage()Axel Lin1-15/+8
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8925: Convert to regulator_list_voltage_linear()Axel Lin1-17/+8
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: max8925: Convert to get_voltage_selAxel Lin1-4/+4
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: core: Release regulator-regulator supplies on errorMark Brown1-0/+2
If we fail while registering a regulator make sure we release the supply for the regulator if there is one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@vger.kernel.org
2012-05-14regulator: tps62360: Convert to set_voltage_sel and regulator_map_voltage_linearAxel Lin1-17/+7
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: tps62360: Convert to regulator_list_voltage_linear()Axel Lin1-14/+6
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14regulator: core: Ensure simple linear voltage mappings falls within the specified rangeAxel Lin1-1/+1
Integer division may truncate the result. Use DIV_ROUND_UP to ensure simple linear voltage mappings falls within the specified range. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regulator: tps62360: add dt supportLaxman Dewangan1-1/+72
Add dt support for the pmu device tps62360 and Add binding documentation with example. With this patch driver will support both device-tree and non-device tree registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13regulator: tps62360: make init_data of platform data to pointer.Laxman Dewangan1-1/+1
Convert platform data member regulator_init_data to pointer type. This will avoid the copy of entire regualator init data into platform data member when adding dt support and it can be achieve by simple assignment: pdata->init_data = of_get_regulator_init_data(dev, dev->of_node); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-12regulator: tps65910 regulator: add device tree supportRhyland Klein1-0/+108
Add devicetree based initialization support for TI tps65910 regulators. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.