aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/qcom_q6v5_mss.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-24remoteproc: qcom: q6v5-mss: Improve readability of reset_assertSibi Sankar1-3/+12
Define AXI_GATING_VALID_OVERRIDE and fixup comments to improve readability of Q6 modem reset sequence on SC7180 SoCs. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200123131236.1078-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-24remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeoutSibi Sankar1-20/+7
Replace the loop for HALT_ACK detection with regmap_read_poll_timeout. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200123131236.1078-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-21remoteproc: qcom: q6v5-mss: Rename boot status timeoutSibi Sankar1-2/+2
Rename the FSM timeout on SC7180 to BOOT_STATUS_TIMEOUT_US. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200117135130.3605-4-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-21remoteproc: qcom: q6v5-mss: Improve readability across clk handlingSibi Sankar1-14/+18
Define CLKEN and CLKOFF for improving readability of Q6SS clock handling. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200117135130.3605-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20remoteproc: mss: q6v5-mss: Add modem support on SC7180Sibi Sankar1-1/+198
Add the out of reset sequence support for modem sub-system on SC7180 SoCs. It requires access to an additional halt nav register to put the modem back into reset. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191219054506.20565-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-20remoteproc: q6v5-mss: Remove mem clk from the active poolSibi Sankar1-1/+0
Currently the mem clk is voted upon from both the active and proxy pool on MSM8998 SoCs where only a proxy vote should suffice. Fix this by removing mem clk from the active pool. Fixes: 1665cbd5731fa ("remoteproc: qcom_q6v5_mss: Add support for MSM8998") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191218132217.28141-2-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-04remoteproc: qcom_q6v5_mss: Add support for MSM8998Jeffrey Hugo1-6/+46
MSM8998 sits between MSM8996 and SDM845 in terms of functionality needed to boot the modem subsystem. Booting mss allows for servicing the traditional cellular usecases along with the wireless usecases such as wifi. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26remoteproc: qcom: q6v5-mss: fixup q6v5_pds_enable error handlingSibi Sankar1-2/+2
dev_pm_domain_attach_by_name will return NULL if the requested power-domain is not a part device node. This could result in NULL pointer de-reference in q6v5_pds_enable. Fix this by checking for IS_ERR_OR_NULL and forward the appropriate error code. Fixes: 4760a896be88e ("remoteproc: q6v5-mss: Vote for rpmh power domains") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-07-17Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteprocLinus Torvalds1-8/+25
Pull remoteproc updates from Bjorn Andersson: "This adds support for the STM32 remoteproc, additional i.MX platforms with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Also initial support for vendor specific resource table entries and support for unprocessed Qualcomm firmware files" * tag 'rproc-v5.3' of git://github.com/andersson/remoteproc: remoteproc: stm32: fix building without ARM SMCC remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER remoteproc: copy parent dma_pfn_offset for vdev remoteproc: qcom: q6v5-mss: Support loading non-split images soc: qcom: mdt_loader: Support loading non-split images remoteproc: stm32: add an ST stm32_rproc driver dt-bindings: remoteproc: add bindings for stm32 remote processor driver dt-bindings: stm32: add bindings for ML-AHB interconnect remoteproc: Use struct_size() helper remoteproc: add vendor resources handling remoteproc: imx: Fix typo in "failed" remoteproc: imx: Broaden the Kconfig selection logic remoteproc,rpmsg: add missing MAINTAINERS file entries remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
2019-07-01remoteproc: qcom: q6v5-mss: Support loading non-split imagesBjorn Andersson1-8/+25
In some software releases the firmware images are not split up with each loadable segment in it's own file. Check the size of the loaded firmware to see if it still contains each segment to be loaded, before falling back to the split-out segments. Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30remoteproc: q6v5-mss: Active powerdomain for SDM845Bjorn Andersson1-2/+29
The SDM845 MSS needs the load_state powerdomain voted for during the duration of the MSS being powered on, to let the AOSS know that it may not perform certain power save measures. So vote for this. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-30remoteproc: q6v5-mss: Vote for rpmh power domainsRajendra Nayak1-5/+114
With rpmh ARC resources being modelled as power domains with performance state, we need to proxy vote on these for SDM845. Add support to vote on multiple of them, now that genpd supports associating mutliple power domains to a device. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [bjorn: Drop device link, improve error handling, name things "proxy"] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-29remoteproc: qcom: Add support for parsing fw dt bindingsSibi Sankar1-10/+37
Add support for parsing "firmware-name" dt bindings which specifies the relative paths of mba/modem/pas image as strings. Fallback to the default paths for mba/modem/pas image on -EINVAL. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-29remoteproc: qcom_q6v5: don't auto boot remote processorRamon Fried1-0/+2
Sometimes that rmtfs userspace module is not brought up fast enough and the modem crashes. disabling automated boot in the driver and triggering the boot from user-space sovles the problem. Acked-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-21remoteproc: qcom: Add shutdown-ack irqSibi Sankar1-0/+4
Add shutdown-ack irq handling required for sysmon shutdown for Q6V5 MSS on SDM845/MSM8996 and for WCSS Q6V5 on QCS404 SoC. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: Revert back to qcom_add_sysmon_subdev returning a sysmon object] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: qcom: q6v5-mss: Add missing regulator for MSM8996Sibi Sankar1-0/+7
Add proxy vote for pll supply on MSM8996 SoC. Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-06remoteproc: qcom: q6v5-mss: Add missing clocks for MSM8996Sibi Sankar1-1/+4
Proxy vote for QDSS clock and remove vote on handover interrupt to provide MSS PBL with access to STM hardware registers during boot. Add "snoc_axi" and "mnoc_axi" to the active clock list. Rename "gpll0_mss_clk" to "gpll0_mss" for consistency across SoCs. Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc on msm8996") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: qcom: q6v5-mss: Register segments/dumpfn for coredumpSibi Sankar1-0/+42
Register the MDT segments, custom dumpfn and private data with the remoteproc core dump functionality. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: qcom: q6v5-mss: Add custom dump function for modemSibi Sankar1-0/+33
The per segment dump function is responsible for loading the mba before device memory segments associated with coredump can be populated and for cleaning up the resources post coredump. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-19remoteproc: qcom: q6v5-mss: Refactor mba load/unload sequenceSibi Sankar1-138/+170
Refactor re-useable parts of mba load/unload sequence into mba_load and mba_reclaim respectively. This is done in order to prevent code duplication for modem coredump, which requires the mba to be loaded before dumping the segments. The following changes in functionality are intended: * Add software bypass to avoid high MX current in mpss error path. * Remove the proxy votes of clk/regs only after the active/reset clks/regs. * Reclaim MBA memory after mpss_load failure in mba_reclaim func. * Set/Unset the dump_mba_loaded flag on mba_load/mba_reclaim respectively. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-08remoteproc: qcom: q6v5-mss: add SCM probe dependencyBrian Norris1-0/+3
The memory ownership transfer request is performed using SCM, ensure that SCM is available before we probe the driver if memory protection is needed by the subsystem. Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch") Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> [bjorn: Added condition for need_mem_protection, updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-07remoteproc: qcom: q6v5-pil: Assign the relocated addressSibi Sankar1-0/+1
Assign the relocated base of the modem image, as the offsets from the virtual memory might not be based on the physical address. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: q6v5-pil: Add PDC reset for modem on SDM845 SoCsSibi Sankar1-5/+24
In the presence of a PDC block working with subsystem RSC, assert/deassert PDC reset in modem start/stop path. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-05remoteproc: qcom: q6v5-pil: Explicitly get mss_restart lineSibi Sankar1-1/+1
Explicitly get mss_restart to facilitate adding PDC reset line for modem on SDM845 SoCs Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-26remoteproc: qcom: Rename Hexagon v5 modem driverBjorn Andersson1-0/+1378
The qcom_q6v5_pil implements support for the self-authenticating modem subsystem. With the introduction of other q6v5 based non-TZ based remoteproc driver the current name is cause for confusion, so rename it to be more specific. No functional change. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.