| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated. Drop its usage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull virtio updates from Rusty Russell:
"All trivial, thanks to the stuff which didn't quite make it time"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
virtio_console: Initialize guest_connected=true for rproc_serial
virtio: use module_virtio_driver.
virtio: Add module driver macro for virtio drivers.
virtio_console: Use virtio device index to generate port name
virtio: make pci_device_id const
virtio: make config_ops const
virtio-mmio: fix wrong comment about register offset
virtio_console: Let unconnected rproc device receive data.
|
|
Pull ARM SoC multiplatform support from Arnd Bergmann:
"Converting more ARM platforms to multiplatform support. This time,
OMAP gets converted, which is a major step since this is by far the
largest platform in terms of code size. The same thing happens to the
vt8500 platform."
* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
net: cwdavinci_cpdma: export symbols for cpsw
remoteproc: omap: depend on OMAP_MBOX_FWK
[media] davinci: do not include mach/hardware.h
ARM: OMAP2+: Make sure files with omap initcalls include soc.h
ARM: OMAP2+: Include soc.h to drm.c to fix compiling
ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall
ARM: multi_v7_defconfig: add ARCH_ZYNQ
ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB
arm: vt8500: Remove remaining mach includes
arm: vt8500: Convert debug-macro.S to be multiplatform friendly
arm: vt8500: Remove single platform Kconfig options
ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S
ARM: OMAP2+: Add minimal support for booting vexpress
ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support
ARM: OMAP2+: Disable code that currently does not work with multiplaform
ARM: OMAP2+: Add multiplatform debug_ll support
ARM: OMAP: Fix dmaengine init for multiplatform
ARM: OMAP: Fix i2c cmdline initcall for multiplatform
ARM: OMAP2+: Use omap initcalls
ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
|
|
Patch a62a6e98 "ARM: OMAP2+: Disable code that currently does not work
with multiplaform" makes the OMAP_MBOX_FWK option depend on !MULTIPLATFORM,
which means we cannot simply select that symbol from OMAP_REMOTEPROC.
Turning the 'select' into 'depends on' ensures that all dependencies
are correct until OMAP_MBOX_FWK loses its dependency.
Without this patch, building allmodconfig results in:
drivers/remoteproc/omap_remoteproc.c:31:26: fatal error: plat/mailbox.h: No such file or directory
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
It is just a table of function pointers, make it const for cleanliness and security
reasons.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
|
|
Fix typos in printk within various drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Eliminate an erroneous invocation of rproc_shutdown inside
the error path of rproc_virtio_find_vqs.
Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
|
|
Pull remoteproc update from Ohad Ben-Cohen:
- Remoteproc Recovery - by Fernando Guzman Lugo
When a remote processor crash is detected, this mechanism will remove
all virtio children devices, wait until their drivers let go, hard
reset the remote processor and reload the firmware (resulting in the
relevant virtio children devices re-added). Essentially the entire
software stack is reset, together with the relevant hardware, so
users don't have to reset the entire phone.
- STE Modem driver is added - by Sjur Brændeland
- OMAP DSP boot address support is added - by Juan Gutierrez
- A handful of fixes/cleanups - Sjur Brændeland, Dan Carpenter, Emil
Goode
* tag 'remoteproc-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: Fix use of format specifyer
remoteproc: fix a potential NULL-dereference on cleanup
remoteproc: select VIRTIO to avoid build breakage
remoteproc: return -EFAULT on copy_from_user failure
remoteproc: snprintf() can return more than was printed
remoteproc: Add STE modem driver
remtoteproc: maintain max notifyid
remoteproc: create a 'recovery' debugfs entry
remoteproc: add actual recovery implementation
remoteproc: add rproc_report_crash function to notify rproc crashes
remoteproc: Add dependency to HAS_DMA
remoteproc/omap: set bootaddr support
|
|
The dma_addr_t type can be either u32 or u64 depending on
the configuration. We should use a format specifyer for the
larger type and explicitly cast to it.
Sparse warnings:
drivers/remoteproc/remoteproc_core.c:234:2: warning:
format ‘%x’ expects argument of type ‘unsigned int’,
but argument 6 has type ‘dma_addr_t’ [-Wformat]
drivers/remoteproc/remoteproc_core.c:596:2: warning:
format ‘%x’ expects argument of type ‘unsigned int’,
but argument 5 has type ‘dma_addr_t’ [-Wformat]
drivers/remoteproc/remoteproc_core.c:634:3:
warning: format ‘%x’ expects argument of type ‘unsigned int’,
but argument 5 has type ‘dma_addr_t’ [-Wformat]
Signed-off-by: Emil Goode <emilgoode@gmail.com>
[fix commit log typos]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
We only need to allocate mapping if there is an IOMMU domain.
Otherwise, when the mappings are released, the assumption that
an IOMMU domain is there will crash and burn.
CC: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ohad: revise commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
drivers/built-in.o: In function `rproc_virtio_finalize_features':
remoteproc_virtio.c:(.text+0x2f9a02): undefined reference to `vring_transport_features'
drivers/built-in.o: In function `rproc_virtio_del_vqs':
remoteproc_virtio.c:(.text+0x2f9a74): undefined reference to `vring_del_virtqueue'
drivers/built-in.o: In function `rproc_virtio_find_vqs':
remoteproc_virtio.c:(.text+0x2f9c44): undefined reference to `vring_new_virtqueue'
drivers/built-in.o: In function `rproc_add_virtio_dev':
(.text+0x2f9e2c): undefined reference to `register_virtio_device'
drivers/built-in.o: In function `rproc_vq_interrupt':
(.text+0x2f9db7): undefined reference to `vring_interrupt'
drivers/built-in.o: In function `rproc_remove_virtio_dev':
(.text+0x2f9e9f): undefined reference to `unregister_virtio_device'
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
copy_from_user() returns the number of bytes remaining to be copied, but
we want to return an error code here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
snprintf() returns the number of characters which would have been
printed if there were enough space. For example, on the first print if
we fill up the 28 character string then it would return a number more
than 30. Use scnprintf() instead because that returns the actual number
of characters printed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
virtio network device multiqueue support reserves
vq 3 for future use (useful both for future extensions and to make it
pretty - this way receive vqs have even and transmit - odd numbers).
Make it possible to skip initialization for
specific vq numbers by specifying NULL for name.
Document this usage as well as (existing) NULL callback.
Drivers using this not coded up yet, so I simply tested
with virtio-pci and verified that this patch does
not break existing drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Instead of storing the queue index in transport-specific virtio structs,
this patch moves them to vring_virtqueue and introduces an helper to get
the value. This lets drivers simplify their management and tracing of
virtqueues.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Add support for the STE modem shared memory driver.
This driver hooks into the remoteproc framework
in order to manage configuration and the virtio
devices.
This driver adds custom firmware handlers, because
STE modem uses a custom firmware layout.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
cc: Linus Walleij <linus.walleij@linaro.org>
cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
[ohad: validate mdev->ops, move setup() to probe/remove, trivial style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.
This moves such data out of the omap include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: linux-omap@vger.kernel.org
|
|
Some of the rproc drivers (STE modem specifically) needs to know
the range of the notification IDs used for notifying the device.
Maintain a variable in struct rproc holding the largest allocated
notification id, so low-level rproc drivers could access it.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[ohad: rebase, slightly edit commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Add a 'recovery' debugfs entry to dynamically disable/enable recovery
at runtime. This is useful when one is trying to debug an rproc crash;
without it, a recovery will immediately take place, making it harder
to debug the crash.
Contributions from Subramaniam Chanderashekarapuram.
Examples:
- disabling recovery:
$ echo disabled > <debugfs>/remoteproc/remoteproc0/recovery
- in case you want to recover a crash, but keep recovery disabled
(useful in debugging sessions when you expect additional crashes
you want to debug):
$ echo recover > <debugfs>/remoteproc/remoteproc0/recovery
- enabling recovery:
$ echo enabled > <debugfs>/remoteproc/remoteproc0/recovery
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: some white space, commentary and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Add rproc_trigger_recovery() which takes care of the recovery itself,
by removing, and re-adding, all of the remoteproc's virtio devices.
This resets all virtio users of the remote processor, during which
the remote processor is powered off and on again.
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: introduce rproc_add_virtio_devices to avoid 1.copying code 2.anomaly]
[ohad: some white space, naming and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Allow low-level remoteproc drivers to report rproc crashes by exporting
a new rproc_report_crash() function (invoking this from non-rproc drivers
is probably wrong, and should be carefully scrutinized if ever needed).
rproc_report_crash() can be called from any context; it offloads the
tasks of handling the crash to a separate thread.
Handling the crash from a separate thread is helpful because:
- Ability to call invoke rproc_report_crash() from atomic context, due to
the fact that many crashes trigger an interrupt, so this function can be
called directly from ISR context.
- Avoiding deadlocks which could happen if rproc_report_crash() is called
from a function which indirectly holds the rproc lock.
Handling the crash might involve:
- Remoteproc register dump
- Remoteproc stack dump
- Remoteproc core dump
- Saving Remoteproc traces so they can be read after the crash
- Reseting the remoteproc in order to make it functional again (hard recovery)
Right now, we only print the crash type which was detected, and only the
mmufault type is supported. Remoteproc low-level drivers can add more types
when needed.
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
[ohad: some commentary, white space and commit log changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Remoteproc relies on HAS_DMA, add this dependency in Kconfig.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Some remote processors (like OMAP4's DSP) require we explicitly
set a boot address from which they'd start executing code when
taken out of reset.
Support for this is now being added to the omap-specific remoteproc
driver through a set_bootaddr function in the platform data which,
if needed, must be set according to the backend remote processor.
For OMAP4's dsp we can use the following control function:
.set_bootaddr = omap_ctrl_write_dsp_boot_addr
Signed-off-by: Juan Gutierrez <jgutierrez@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
[ohad: slight changes to the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Pull remoteproc update from Ohad Ben-Cohen:
- custom binary format support from Sjur Brændeland
- groundwork for recovery and runtime pm support
- some cleanups and API simplifications
Fix up conflicts in drivers/remoteproc/remoteproc_core.c due to clashes
with earlier cleanups by Sjur Brændeland (with part of the cleanups
moved into the new remoteproc_elf_loader.c file).
* tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
MAINTAINERS: add remoteproc's git
remoteproc: Support custom firmware handlers
remoteproc: Move Elf related functions to separate file
remoteproc: Add function rproc_get_boot_addr
remoteproc: Pass struct fw to load_segments and find_rsc_table.
remoteproc: adopt the driver core's alloc/add/del/put naming
remoteproc: remove the get_by_name/put API
remoteproc: support non-iommu carveout assignment
remoteproc: simplify unregister/free interfaces
remoteproc: remove the now-redundant kref
remoteproc: maintain a generic child device for each rproc
remoteproc: allocate vrings on demand, free when not needed
|
|
Firmware handling is made customizable.
This is done by creating a separate ops structure for the
firmware functions that depends on a particular firmware
format (such as ELF). The ELF functions are default used
unless the HW driver explicitly injects another firmware
handler by updating rproc->fw_ops.
The function rproc_da_to_va() is exported, as custom
firmware handlers may need to use this function.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[ohad: namespace fixes, whitespace fixes, style fixes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Prepare for introduction of custom firmware loaders by
moving all ELF related handling into a separate file.
The functions: rproc_find_rsc_table(), rproc_fw_sanity_check(),
rproc_find_rsc_table() and rproc_get_boot_addr() are moved
to the new file remoteproc_elf_loader.c. The function
rproc_da_to_va() is made non-static and is declared in
remoteproc_internal.h
No functional changes are introduced in this patch.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[ohad: rebase, fix kerneldoc, put prototypes in remoteproc_internal.h]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Prepare for introduction of custom firmware loaders by
moving the function operating on ELF data-structures into
separate functions. Move lookup of the boot_addr in the
ELF binary to the function rproc_get_boot_addr().
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
[rproc_get_boot_addr's kerneldoc: add missing @rproc line]
[rproc_get_boot_addr's kerneldoc: minor style changes]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Prepare for introduction of custom firmware loaders by changing
the functions rproc_find_rcs_table() and rproc_load_segments()
to use struct firmware as parameter.
When the custom loader framework is introduced all calls into
the firmware specific function must use struct firmware as
parameter.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
To make remoteproc's API more intuitive for developers, we adopt
the driver core's naming, i.e. alloc -> add -> del -> put. We'll also
add register/unregister when their first user shows up.
Otherwise - there's no functional change here.
Suggested by Russell King <linux@arm.linux.org.uk>.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Remove rproc_get_by_name() and rproc_put(), and the associated
remoteproc infrastructure that supports it (i.e. klist and friends),
because:
1. No one uses them
2. Using them is highly discouraged, and any potential user
will be deeply scrutinized and encouraged to move.
If a user, that absolutely can't live with the direct boot/shutdown
model, does show up one day, then bringing this functionality back
is going to be trivial.
At this point though, keeping this functionality around is way too
much of a maintenance burden.
Cc: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: Loic Pallardy <loic.pallardy@stericsson.com>
Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Cc: Mark Grosen <mgrosen@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Publish carveout addresses on non-iommu setups too.
Reported-and-acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Simplify the unregister/free interfaces, and make them easier
to understand and use, by moving to a symmetric and consistent
alloc() -> register() -> unregister() -> free() flow.
To create and register an rproc instance, one needed to invoke
rproc_alloc() followed by rproc_register().
To unregister and free an rproc instance, one now needs to invoke
rproc_unregister() followed by rproc_free().
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Now that every rproc instance contains a device, we don't need a
kref anymore to maintain the refcount of the rproc instances:
that's what device are good with!
This patch removes the now-redundant kref, and switches to
{get, put}_device instead of kref_{get, put}.
We also don't need the kref's release function anymore, and instead,
we just utilize the class's release handler (which is now responsible
for all memory de-allocations).
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
For each registered rproc, maintain a generic remoteproc device whose
parent is the low level platform-specific device (commonly a pdev, but
it may certainly be any other type of device too).
With this in hand, the resulting device hierarchy might then look like:
omap-rproc.0
|
- remoteproc0 <---- new !
|
- virtio0
|
- virtio1
|
- rpmsg0
|
- rpmsg1
|
- rpmsg2
Where:
- omap-rproc.0 is the low level device that's bound to the
driver which invokes rproc_register()
- remoteproc0 is the result of this patch, and will be added by the
remoteproc framework when rproc_register() is invoked
- virtio0 and virtio1 are vdevs that are registered by remoteproc
when it realizes that they are supported by the firmware
of the physical remote processor represented by omap-rproc.0
- rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg
channels, and are registerd by the rpmsg bus when it gets notified
about their existence
Technically, this patch:
- changes 'struct rproc' to contain this generic remoteproc.x device
- creates a new "remoteproc" type, to which this new generic remoteproc.x
device belong to.
- adds a super simple enumeration method for the indices of the
remoteproc.x devices
- updates all dev_* messaging to use the generic remoteproc.x device
instead of the low level platform-specific device
- updates all dma_* allocations to use the parent of remoteproc.x (where
the platform-specific memory pools, most commonly CMA, are to be found)
Adding this generic device has several merits:
- we can now add remoteproc runtime PM support simply by hooking onto the
new "remoteproc" type
- all remoteproc log messages will now carry a common name prefix
instead of having a platform-specific one
- having a device as part of the rproc struct makes it possible to simplify
refcounting (see subsequent patch)
Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and
discussing these ideas in one of the remoteproc review threads and
to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out
with the (upcoming) runtime PM support for remoteproc.
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Dynamically allocate the vrings' DMA when the remote processor
is about to be powered on (i.e. when ->find_vqs() is invoked),
and release them as soon as it is powered off (i.e. when ->del_vqs()
is invoked).
The obvious and immediate benefit is better memory utilization, since
memory for the vrings is now only allocated when the relevant remote
processor is used.
Additionally, this approach also makes recovery of a (crashing)
remote processor easier: one just needs to remove the relevant
vdevs, and the entire vrings cleanup takes place automagically.
Tested-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
Remoteproc requires user space firmware loading support, so
let's select FW_LOADER explicitly to avoid painful misconfigurations
(which only show up in runtime).
Cc: stable <stable@vger.kernel.org>
Reported-by: Mark Grosen <mgrosen@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
OMAP_REMOTEPROC selects REMOTEPROC and RPMSG, both of which depend
on EXPERIMENTAL, so let's have OMAP_REMOTEPROC depend on EXPERIMENTAL
too, in order to avoid the below randconfig warnings.
warning: (OMAP_REMOTEPROC) selects REMOTEPROC which has unmet direct dependencies (EXPERIMENTAL)
warning: (OMAP_REMOTEPROC) selects RPMSG which has unmet direct dependencies (EXPERIMENTAL)
Cc: stable <stable@vger.kernel.org>
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
For some reason one of the dev_err invocations is using a wrong
device so fix that.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable@vger.kernel.org
|
|
If rproc_find_rsc_table() fails, rproc_fw_boot() must set
return-value before jumping to clean_up label. Otherwise no
error value is returned.
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable@vger.kernel.org
|
|
Fix compile warnings from GCC 4.6.1 when printing values of type size_t.
drivers/remoteproc/remoteproc_core.c:251:6:
warning: format ‘%x’ expects argument of type ‘unsigned int’,
but argument 4 has type ‘size_t’ [-Wformat]
drivers/remoteproc/remoteproc_core.c:938:9:
warning: format ‘%u’ expects argument of type ‘unsigned int’,
but argument 4 has type ‘size_t’ [-Wformat]
drivers/remoteproc/remoteproc_core.c:1023:2:
warning: format ‘%d’ expects argument of type ‘int’,
but argument 4 has type ‘size_t’ [-Wformat]
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: stable@vger.kernel.org
|
|
Pull IOMMU updates from Joerg Roedel:
"Not much stuff this time. The only change to the IOMMU core code is
the addition of a handle to the fault handling code. A few updates to
the AMD IOMMU driver to work around new errata. The other patches are
mostly fixes and enhancements to the existing ARM IOMMU drivers and
documentation updates.
A new IOMMU driver for the Exynos platform was also underway but got
merged via the Samsung tree and is not part of this tree."
* tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Documentation: kernel-parameters.txt Add amd_iommu_dump
iommu/core: pass a user-provided token to fault handlers
iommu/tegra: gart: Fix register offset correctly
iommu: OMAP: device detach on domain destroy
iommu: tegra/gart: Add device tree support
iommu: tegra/gart: use correct gart_device
iommu/tegra: smmu: Print device name correctly
iommu/amd: Add workaround for event log erratum
iommu/amd: Check for the right TLP prefix bit
dma-debug: release free_entries_lock before saving stack trace
|
|
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
|
|
Sometimes a single IOMMU user may have to deal with several
different IOMMU devices (e.g. remoteproc).
When an IOMMU fault happens, such users have to regain their
context in order to deal with the fault.
Users can't use the private fields of neither the iommu_domain nor
the IOMMU device, because those are already used by the IOMMU core
and low level driver (respectively).
This patch just simply allows users to pass a private token (most
notably their own context pointer) to iommu_set_fault_handler(),
and then makes sure it is provided back to the users whenever
an IOMMU fault happens.
The patch also adopts remoteproc to the new fault handling
interface, but the real functionality using this (recovery of
remote processors) will only be added later in a subsequent patch
set.
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Fix a nasty off-by-one bug in __rproc_free_vrings which
resulted in a memory leak and (for some platforms) failures
to reload the remote processor.
Signed-off-by: Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com>
[ohad@wizery.com: reword commit log, stick with the for loop]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
|
|
release_firmware deals gracefully with NULL pointers, so checking
first is redundant.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
Tejun Heo
Linus Torvalds
Arnd Bergmann
Stephen Hemminger
Kees Cook
Greg Kroah-Hartman
Masanari Iida
Ohad Ben-Cohen
Emil Goode
Dan Carpenter
Michael S. Tsirkin
Jason Wang
Sjur Brændeland
Fernando Guzman Lugo
Juan Gutierrez
Subramaniam Chanderashekarapuram
Jesper Juhl