aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-ab8500.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-07-03drivers/rtc/rtc-ab8500.c: add second resolution to rtc driverAlexandre Torgue1-1/+62
Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms. Existing registers (minutes hi, mid and low) have seen their offsets changed. Here is the new mapping: * AlarmSec (A) 0x22 * AlarmMinLow (M) from 0x8 to 0x23 * AlarmMinMid (M) from 0x9 to 0x24 * AlarmMinHigh (M) from 0xA to 0x25 Signed-off-by: Julien Delacou <julien.delacou@stericsson.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: rtc-ab8500: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-ab8500: use devm_*() functionsJingoo Han1-12/+6
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-03Drivers: rtc: remove __dev* attributes.Greg Kroah-Hartman1-3/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-20drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablementLee Jones1-6/+0
All AB8500 devices are now registered via MFD core, so Device Tree capability is no longer required for probing. Here we pull the DT match table to ensure we're no longer probed during Device Tree start-up. CC: Alessandro Zummo <a.zummo@towertech.it> CC: rtc-linux@googlegroups.com Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-07-30drivers/rtc/rtc-ab8500.c: remove fix for AB8500 ED versionBengt Jonsson1-16/+11
AB8500 ED (Early Drop) is no longer supported by the kernel. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30drivers/rtc/rtc-ab8500.c: use UIE emulationRamesh Chandrasekaran1-1/+14
RTC: Fix to correct improper implementation of clock update irq (RTC_UIE) and enable UIE Emulation. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11drivers/rtc/rtc-ab8500.c: ensure correct probing of the AB8500 RTC when Device Tree is enabledLee Jones1-1/+7
Without this patch, if Device Tree is enabled the AB8500 RTC wouldn't get probed at all, as there is no reference to it from platform code. This patch ensures the driver is probed during normal DT start-up. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-11drivers/rtc/rtc-ab8500.c: use IRQF_ONESHOT when requesting a threaded IRQLee Jones1-1/+1
This driver's IRQ registration is failing because the kernel now forces IRQs to be ONESHOT if no IRQ handler is passed. Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds1-1/+1
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-10rtc: convert drivers/rtc/* to use module_platform_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/rtc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben@simtec.co.uk> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: add calibration attribute to AB8500 RTCMark Godfrey1-0/+112
The rtc_calibration attribute allows user-space to get and set the AB8500's RtcCalibration register. The AB8500 will then use the value in this register to compensate for RTC drift every 60 seconds. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mark Godfrey <mark.godfrey@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10drivers/rtc/rtc-ab8500.c: change msleep() to usleep_range()Linus Walleij1-3/+3
The resolution of msleep is related to HZ, so with HZ set to 100 any msleep of less than 10ms will become ~10ms. This is not what we want. Use the hrtimer-based usleep_range() and allow for some slack in the non-critical path so we have more control of what is happening here. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Jonas Aaberg <jonas.aberg@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: set can_wake flagAndrew Lynn1-0/+2
Set can_wake flag so wakealarm property is visible in sysfs. Signed-off-by: Andrew Lynn <andrew.lynn@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10rtc/ab8500: don't disable IRQ:s when suspendingRobert Marklund1-2/+2
We want this driver to be able to wake up the system. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij1-1/+1
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin1-50/+53
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-27rtc: AB8500 RTC driverVirupax Sadashivpetimath1-0/+363
Add a driver for the RTC on the AB8500 power management chip. This is a client of the AB8500 MFD driver. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.