aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc/rtc-sh.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-12rtc: sh: convert to SPDX identifiersKuninori Morimoto1-5/+2
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-20Merge tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds1-89/+1
Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
2018-07-27rtc: sh: remove unused variable rtc_devAnders Roxell1-1/+0
When building rtc-sh, rtc_dev isn't used in function __sh_rtc_periodic. drivers/rtc/rtc-sh.c: In function ‘__sh_rtc_periodic’: drivers/rtc/rtc-sh.c:146:21: warning: unused variable ‘rtc_dev’ [-Wunused-variable] struct rtc_device *rtc_dev = rtc->rtc_dev; ^~~~~~~ Remove the declaration of rtc_dev to dispose the warning. Fixes: ec623ff014c4 ("rtc: sh: remove dead code") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26rtc: sh: remove dead codeAlexandre Belloni1-88/+1
Since commit 80d4bb515b78 ("RTC: Cleanup rtc_class_ops->irq_set_state") and commit 696160fec162 ("RTC: Cleanup rtc_class_ops->irq_set_freq()"), sh_rtc_irq_set_state and sh_rtc_irq_set_freq are never called. Remove them along with task handling. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-03rtc: simplify getting .drvdataWolfram Sang1-10/+5
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michal Simek <michal.simek@xilinx.com> (for zynqmp) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: stop validating rtc_time in .read_timeAlexandre Belloni1-1/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-04-22rtc: sh: mark PM functions as unusedArnd Bergmann1-4/+2
The sh_rtc_set_irq_wake() function is only called from the suspend/resume handlers that may be hidden, causing a harmless warning: drivers/rtc/rtc-sh.c:724:13: error: 'sh_rtc_set_irq_wake' defined but not used [-Werror=unused-function] static void sh_rtc_set_irq_wake(struct device *dev, int enabled) The most reliable way to avoid the warning is to remove the existing #ifdef and mark the two functions as __maybe_unused so the compiler can silently drop all three when there is no reference. Fixes: dab5aec64bf5 ("rtc: sh: add support for rza series") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-03rtc: sh: add support for rza seriesChris Brandt1-5/+28
This same RTC is used in RZ/A series MPUs, therefore with some slight changes, this driver can be reused. Additionally, since ARM architectures require Device Tree configurations, device tree support has been added. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11rtc: constify rtc_class_ops structuresBhumika Goyal1-1/+1
Declare rtc_class_ops structures as const as they are only passed as an argument to the function devm_rtc_device_register. This argument is of type const struct rtc_class_ops *, so rtc_class_ops structures having this property can be declared const. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct rtc_class_ops i@p = {...}; @ok1@ identifier r1.i; position p; @@ devm_rtc_device_register(...,&i@p,...) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct rtc_class_ops i; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: sh: don't validate alarm time provided to .set_alarmUwe Kleine-König1-40/+1
The rtc core doesn't give broken dates to a driver's .set_alarm callback, so there should be no need for validation. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: sh: drop bogus assignment of tm_year in .read_alarmUwe Kleine-König1-1/+0
This rtc doesn't support triggering on years, so don't assign tm_year instead of claiming the alarm is to trigger in year 67435. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20rtc: remove useless DRV_VERSIONAlexandre Belloni1-2/+0
Many drivers are defining a DRV_VERSION. This is often only used for MODULE_VERSION and sometimes to print an info message at probe time. This is kind of pointless as they are all versionned with the kernel anyway. Also the core will print a message when a new rtc is found. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-13drivers/rtc/rtc-sh.c: use dev_get_platdata()Jingoo Han1-2/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: rtc-sh: use devm_*() functionsJingoo Han1-51/+21
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03rtc: rtc-sh: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063100 ("device-core: Ensure drvdata = NULL when no driver is bound"). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-sh: switch to using SIMPLE_DEV_PM_OPSJingoo Han1-5/+4
Switch to using the SIMPLE_DEV_PM_OPS macro to declare the driver's pm_ops. It reduces code size. Also, CONFIG_PM_SLEEP is added to prevent build warning when CONFIG_PM_SLEEP is not selected. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29rtc: rtc-sh: use module_platform_driver_probe()Jingoo Han1-12/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/rtc: remove IRQF_DISABLEDYong Zhang1-4/+4
Since commit e58aa3d2d0cc ("genirq: run irq handlers with interrupts disabled") we run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled - see commit b738a50a2026 ("genirq: warn when handler enables interrupts"). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-29drivers: Final irq namespace conversionThomas Gleixner1-3/+3
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-09RTC: Clean out UIE icotl implementationsJohn Stultz1-22/+0
With the generic RTC rework, the UIE mode irqs are handled in the generic layer, and only hardware specific ioctls get passed down to the rtc driver layer. So this patch removes the UIE mode ioctl handling in the rtc driver layer, which never get used. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-03-09RTC: Cleanup rtc_class_ops->irq_set_freq()John Stultz1-1/+0
With the generic rtc code now emulating PIE mode irqs via an hrtimer, no one calls the rtc_class_ops->irq_set_freq call. This patch removes the hook and deletes the driver functions if no one else calls them. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-03-09RTC: Cleanup rtc_class_ops->irq_set_stateJohn Stultz1-1/+0
With PIE mode interrupts now emulated in generic code via an hrtimer, no one calls rtc_class_ops->irq_set_state(), so this patch removes it along with driver implementations. CC: Thomas Gleixner <tglx@linutronix.de> CC: Alessandro Zummo <a.zummo@towertech.it> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> CC: rtc-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03RTC: Convert rtc drivers to use the alarm_irq_enable methodJohn Stultz1-4/+7
Some rtc drivers use the ioctl method instead of the alarm_irq_enable method for enabling alarm interupts. With the new virtualized RTC rework, its important for drivers to use the alarm_irq_enable instead. This patch converts the drivers that use the AIE ioctl method to use the alarm_irq_enable method. Other ioctl cmds are left untouched. I have not been able to test or even compile most of these drivers. Any help to make sure this change is correct would be appreciated! CC: Alessandro Zummo <a.zummo@towertech.it> CC: Thomas Gleixner <tglx@linutronix.de> CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: John Stultz <john.stultz@linaro.org>
2010-11-08rtc: rtc-sh - fix a memory leakAxel Lin1-2/+2
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo1-0/+1
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-09rtc: rtc-sh: Fix up oops in early periodic freq assignment.Paul Mundt1-3/+1
With the reordered init order, the rtc device is not registered until later, while sh_rtc_irq_set_freq() was attempting to assign ->irq_freq directly, resulting in an oops. This is handled by the upper layers for us, so just kill off the problematic dereference completely. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20rtc: rtc-sh fixesAlessandro Zummo1-61/+32
- simplifies irq set freq - ioctl() was duplicating functionalities of rtc-dev core - corrected initialization sequence - use platform_driver_probe Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Angelo Castello <angelo.castello@st.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16rtc: rtc-sh: clock framework support.Paul Mundt1-18/+49
This adds clock framework support to the rtc-sh driver. With this in place, platforms can default to leaving the clock disabled rather than placing it in the always enabled state. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02rtc: rtc-sh: use set_irq_wake()Magnus Damm1-0/+36
Modify the sh_rtc driver to use set_irq_wake() during suspend and resume. These functions are used to enable the rtc interrupts in the interrupt controller so the rtc can be used to wakeup the system from suspend. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20sh: sh-rtc wakeup supportMagnus Damm1-0/+1
Flag that the SuperH RTC supports wakeup. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20sh: sh-rtc invalid time reworkMagnus Damm1-6/+9
This patch modifies invalid time handling in the SuperH RTC driver. Instead of zeroing the returned value at read-out time we just return an error code and reset invalid values during probe. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20sh: sh-rtc carry interrupt reworkMagnus Damm1-8/+32
This patch modifies the SuperH RTC driver to only enable carry interrupts when needed. So by default no interrupts are enabled with this patch. Without this patch a suspending system will most likely wake up by the carry interrupt regardless if the alarm interrupt has been enabled or not. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06rtc: rtc-sh: Bump version up to reflect single IRQ support changes.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27rtc: sh-rtc: Add Single IRQ SupportMagnus Damm1-73/+117
Add support for single IRQ hardware to the sh-rtc driver. This is useful for processors with limited interrupt masking support such as sh7750 and sh7780. With this patch in place we can add logic to the intc code that merges all RTC vectors into a single linux interrupt with proper masking/unmasking support. Specify a single IRQ in the platform data to use this new shared IRQ feature. Separate Periodic/Carry/Alarm IRQs are still supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-06rtc: move power of 2 periodic frequency check down into driversJonathan Cameron1-0/+3
Move the power of 2 check on frequencies down into individual rtc drivers This is to allow for non power of 2 real time clock periodic interrupts such as those on the pxa27x to be found in the new pxa27x-rtc driver Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06rtc: bunch of drivers: fix 'no irq' case handingAnton Vorontsov1-4/+6
This patch fixes a bunch of irq checking misuses. Most drivers were getting irq via platform_get_irq(), which returns -ENXIO or r->start. rtc-cmos.c is special. It is using PNP and platform bindings. Hopefully nobody is using PNP IRQ 0 for RTC. So the changes should be safe. rtc-sh.c is using platform_get_irq, but was storing a result into an unsigned type, then was checking for < 0. This is fixed now. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds1-7/+14
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits) sh: Move SH-4 CPU headers down one more level. sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected. sh: Migrate common board headers to mach-common/. sh: Move the CPU definition headers from asm/ to cpu/. serial: sh-sci: Add support SCIF of SH7723 video: add sh_mobile_lcdc platform flags video: remove unused sh_mobile_lcdc platform data sh: remove consistent alloc cruft sh: add dynamic crash base address support sh: reduce Migo-R smc91x overruns sh: Fix up some merge damage. Fix debugfs_create_file's error checking method for arch/sh/mm/ Fix debugfs_create_dir's error checking method for arch/sh/kernel/ sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board sh: Use sh7720 GPIO on magicpanelr2 board sh: Add sh7720 pinmux code sh: Use sh7203 GPIO on rsk7203 board sh: Add sh7203 pinmux code sh: Use sh7723 GPIO on AP325RXA board sh: Add sh7723 pinmux code ...
2008-10-20drivers/rtc/: use bcd2bin/bin2bcdAdrian Bunk1-20/+20
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Paul Mundt1-7/+0
Conflicts: Documentation/kernel-parameters.txt arch/sh/include/asm/elf.h
2008-10-16rtc: file close() consistently disables repeating irqsDavid Brownell1-7/+0
Make the rtc framework consistent about disabling 1/second update IRQs that may have been activated through the /dev interface, when that /dev file is closed. (It may have closed because of coredump, etc.) This was previously done only for emulated update IRQs ... now, do it always. Also comment the current policy: repeating IRQs (periodic, update) that userspace enabled will be cleanly disabled, but alarms are left alone. Such repeating IRQs are a constant and pointless system load. Update some RTC drivers to remove now-needless release() methods. Most such methods just enforce that policy. The others all seem to be buggy, and mistreat in-kernel clients of periodic or alarm IRQs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Sharp <andy.sharp@onstor.com> Cc: Angelo Castello <angelo.castello@st.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Hommel <thomas.hommel@gefanuc.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-11rtc-sh: Unsigned rtc->{periodic,carry,alarm}_irq cannot be negativeroel kluin1-7/+14
possibly since commit b420b1a7a17ea88531d0e12b2f2679a0c8365803 Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08rtc: rtc-sh: Fixup for 64-bit resources.Paul Mundt1-5/+9
ioremap() and friends get the size information right, so force everything to go through there. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-28rtc: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-1/+1
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18rtc: rtc-sh: Add support for periodic IRQs.Angelo Castello1-109/+187
This adds support for periodic IRQs to the rtc-sh driver. RTC_IRQP_READ/RTC_IRQP_SET are added, with a number of other fixes and reordering across the rest of the code. Signed-off-by: Angelo Castello <angelo.castello@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-11rtc: fix platform driver hotplug/coldplugKay Sievers1-0/+1
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28rtc: rtc-sh: Split out the CPU defs to asm/cpu/.Paul Mundt1-19/+1
With all of the different CPU types this was getting a but unwieldly. Since sh64 is now integrated, we don't have to worry about multiple architectures caring about the header definitions. Split out the defs for each asm/cpu/ to make rtc-sh slightly less visually offensive. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28rtc: rtc-sh: SH-2A support.Paul Mundt1-2/+18
Trivial support for the SH-2A on-chip RTC. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.