aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rtc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-14Merge tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds32-780/+453
Pull RTC updates from Alexandre Belloni: "RTC for 4.9 Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection" * tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits) rtc: rv8803: set VDETOFF and SWOFF via device tree dt/bindings: Add bindings for Micro Crystal rv8803 devicetree: Add Micro Crystal AG vendor id rtc: cmos: avoid unused function warning rtc: ac100: Add NULL checking for devm_kzalloc call rtc: ds1347: changed raw spi calls to register map calls rtc: cmos: Restore alarm after resume rtc: cmos: Clear ACPI-driven alarms upon resume rtc: omap: Support ext_wakeup configuration rtc: cmos: Initialize hpet timer before irq is registered rtc: asm9260: rework locking rtc: asm9260: allow COMPILE_TEST rtc: constify rtc_class_ops structures rtc: ac100: support clock-output-names in device tree binding rtc: rx6110: remove owner assignment rtc: pic32: Delete owner assignment rtc: bq32k: Fix handling of oscillator failure flag rtc: bq32k: Use correct mask name for 'minutes' register. rtc: sysfs: fix a cast removing the const attribute Documentation: dt: Intersil isl12057 is not a trivial device ...
2016-10-12rtc: rv8803: set VDETOFF and SWOFF via device treeOleksij Rempel1-2/+48
There might be designs where the power supply circuit is designed in a way that VDETOFF and SWOFF is required to be set. Otherwise the RTC detects a power loss. Add a device tree interface for this. Signed-off-by: Carsten Resch <Carsten.Resch@de.bosch.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Oleksij Rempel <fixed-term.Oleksij.Rempel@de.bosch.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-04Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-mergedLee Jones4-2/+641
2016-09-22rtc: cmos: avoid unused function warningArnd Bergmann1-17/+4
A bug fix for the ACPI side of this driver caused a harmless build warning: drivers/rtc/rtc-cmos.c:1115:13: error: 'cmos_check_acpi_rtc_status' defined but not used [-Werror=unused-function] static void cmos_check_acpi_rtc_status(struct device *dev, We can avoid the warning and simplify the driver at the same time by removing the #ifdef for CONFIG_PM and rely on the SIMPLE_DEV_PM_OPS() to set everything up correctly. cmos_resume() has to get marked as __maybe_unused so we don't introduce another warning, and the two variants of cmos_poweroff() can get merged into one using an IS_ENABLED() check. Fixes: 983bf1256edb ("rtc: cmos: Clear ACPI-driven alarms upon resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22rtc: ac100: Add NULL checking for devm_kzalloc callAxel Lin1-0/+3
devm_kzalloc can return NULL, add NULL checking to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22rtc: ds1347: changed raw spi calls to register map callsRaghavendra Ganiga2-43/+54
This patch changes calls of spi read write calls to register map read and write calls in rtc ds1347 Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: cmos: Restore alarm after resumeGabriele Mazzotta1-0/+23
Some platform firmware may interfere with the RTC alarm over suspend, resulting in the kernel and hardware having different ideas about system state but also potentially causing problems with firmware that assumes the OS will clean this case up. This patch restores the RTC alarm on resume to ensure that kernel and hardware are in sync. The case we've seen is Intel Rapid Start, which is a firmware-mediated feature that automatically transitions systems from suspend-to-RAM to suspend-to-disk without OS involvement. It does this by setting the RTC alarm and a flag that indicates that on wake it should perform the transition rather than re-starting the OS. However, if the OS has set a wakeup alarm that would wake the machine earlier, it refuses to overwrite it and allows the system to wake instead. This fails in the following situation: 1) User configures Intel Rapid Start to transition after (say) 15 minutes 2) User suspends to RAM. Firmware sets the wakeup alarm for 15 minutes in the future 3) User resumes after 5 minutes. Firmware does not reset the alarm, and as such it is still set for 10 minutes in the future 4) User suspends after 5 minutes. Firmware notices that the alarm is set for 5 minutes in the future, which is less than the 15 minute transition threshold. It therefore assumes that the user wants the machine to wake in 5 minutes 5) System resumes after 5 minutes The worst case scenario here is that the user may have put the system in a bag between (4) and (5), resulting in it running in a confined space and potentially overheating. This seems reasonably important. The Rapid Start support code got added in 3.11, but it can be configured in the firmware regardless of kernel support. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: cmos: Clear ACPI-driven alarms upon resumeGabriele Mazzotta1-0/+47
Currently ACPI-driven alarms are not cleared when they wake the system. As consequence, expired alarms must be manually cleared to program a new alarm. Fix this by correctly handling ACPI-driven alarms. More specifically, the ACPI specification [1] provides for two alternative implementations of the RTC. Depending on the implementation, the driver either clear the alarm from the resume callback or from ACPI interrupt handler: - The platform has the RTC wakeup status fixed in hardware (ACPI_FADT_FIXED_RTC is 0). In this case the driver can determine if the RTC was the reason of the wakeup from the resume callback by reading the RTC status register. - The platform has no fixed hardware feature event bits. In this case a GPE is used to wake the system and the driver clears the alarm from its handler. [1] http://www.acpi.info/DOWNLOADS/ACPI_5_Errata%20A.pdf Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21rtc: omap: Support ext_wakeup configurationMarcin Niestroj2-8/+163
Support configuration of ext_wakeup sources. This patch makes it possible to enable ext_wakeup and set it's polarity, depending on board configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to notify about power-button presses. Handling power-button presses enables to recover from RTC-only power states correctly. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-20rtc: cmos: Initialize hpet timer before irq is registeredPratyush Anand1-1/+3
We have observed on few x86 machines with rtc-cmos device that hpet_rtc_interrupt() is called just after irq registration and before cmos_do_probe() could call hpet_rtc_timer_init(). So, neither hpet_default_delta nor hpet_t1_cmp is initialized by the time interrupt is raised in the given situation, and this results in NMI watchdog LOCKUP. It has only been observed sporadically on kdump secondary kernels. See the call trace: ---<-snip->--- [ 27.913194] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 [ 27.915371] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-342.el7.x86_64 #1 [ 27.917503] Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014 [ 27.919455] ffffffff8186a728 0000000059c82488 ffff880034e05af0 ffffffff81637bd4 [ 27.921870] ffff880034e05b70 ffffffff8163144a 0000000000000010 ffff880034e05b80 [ 27.924257] ffff880034e05b20 0000000059c82488 0000000000000000 0000000000000000 [ 27.926599] Call Trace: [ 27.927352] <NMI> [<ffffffff81637bd4>] dump_stack+0x19/0x1b [ 27.929080] [<ffffffff8163144a>] panic+0xd8/0x1e7 [ 27.930588] [<ffffffff8111d3e0>] ? restart_watchdog_hrtimer+0x50/0x50 [ 27.932502] [<ffffffff8111d4a2>] watchdog_overflow_callback+0xc2/0xd0 [ 27.934427] [<ffffffff811612c1>] __perf_event_overflow+0xa1/0x250 [ 27.936232] [<ffffffff81161d94>] perf_event_overflow+0x14/0x20 [ 27.937957] [<ffffffff81032ae8>] intel_pmu_handle_irq+0x1e8/0x470 [ 27.939799] [<ffffffff8164164b>] perf_event_nmi_handler+0x2b/0x50 [ 27.941649] [<ffffffff81640d99>] nmi_handle.isra.0+0x69/0xb0 [ 27.943348] [<ffffffff81640f49>] do_nmi+0x169/0x340 [ 27.944802] [<ffffffff816401d3>] end_repeat_nmi+0x1e/0x2e [ 27.946424] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.948197] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.949992] [<ffffffff81056ee5>] ? hpet_rtc_interrupt+0x85/0x380 [ 27.951816] <<EOE>> <IRQ> [<ffffffff8108f5a3>] ? run_timer_softirq+0x43/0x340 [ 27.954114] [<ffffffff8111e24e>] handle_irq_event_percpu+0x3e/0x1e0 [ 27.955962] [<ffffffff8111e42d>] handle_irq_event+0x3d/0x60 [ 27.957635] [<ffffffff811210c7>] handle_edge_irq+0x77/0x130 [ 27.959332] [<ffffffff8101704f>] handle_irq+0xbf/0x150 [ 27.960949] [<ffffffff8164a86f>] do_IRQ+0x4f/0xf0 [ 27.962434] [<ffffffff8163faed>] common_interrupt+0x6d/0x6d [ 27.964101] <EOI> [<ffffffff8163f43b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 27.966308] [<fffff8111ff07>] __setup_irq+0x2a7/0x570 [ 28.067859] [<ffffffff81056e60>] ? hpet_cpuhp_notify+0x140/0x140 [ 28.069709] [<ffffffff8112032c>] request_threaded_irq+0xcc/0x170 [ 28.071585] [<ffffffff814b24a6>] cmos_do_probe+0x1e6/0x450 [ 28.073240] [<ffffffff814b2710>] ? cmos_do_probe+0x450/0x450 [ 28.074911] [<ffffffff814b27cb>] cmos_pnp_probe+0xbb/0xc0 [ 28.076533] [<ffffffff8139b245>] pnp_device_probe+0x65/0xd0 [ 28.078198] [<ffffffff813f8ca7>] driver_probe_device+0x87/0x390 [ 28.079971] [<ffffffff813f9083>] __driver_attach+0x93/0xa0 [ 28.081660] [<ffffffff813f8ff0>] ? __device_attach+0x40/0x40 [ 28.083662] [<ffffffff813f6a13>] bus_for_each_dev+0x73/0xc0 [ 28.085370] [<ffffffff813f86fe>] driver_attach+0x1e/0x20 [ 28.086974] [<ffffffff813f8250>] bus_add_driver+0x200/0x2d0 [ 28.088634] [<ffffffff81ade49a>] ? rtc_sysfs_init+0xe/0xe [ 28.090349] [<ffffffff813f9704>] driver_register+0x64/0xf0 [ 28.091989] [<ffffffff8139b070>] pnp_register_driver+0x20/0x30 [ 28.093707] [<ffffffff81ade4ab>] cmos_init+0x11/0x71 ---<-snip->--- This patch moves hpet_rtc_timer_init() before IRQ registration, so that we can gracefully handle such spurious interrupts. It also masks HPET RTC interrupts, in case IRQ registration fails. We were able to reproduce the problem in maximum 15 trials of kdump secondary kernel boot on an hp-dl160gen8 FCoE host machine without this patch. However, more than 35 trials went fine after applying this patch. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Pratyush Anand <panand@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05rtc: asm9260: rework lockingAlexandre Belloni1-15/+5
The rtc-asm9260 driver uses a discrete spinlock (wrongly uninitialized). Use the rtc mutex to lock mmio accesses instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05rtc: asm9260: allow COMPILE_TESTAlexandre Belloni1-1/+1
The rtc-asm9260 driver compiles correctly on other architectures, add COMPILE_TEST to improve code coverage. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-02rtc: constify rtc_class_ops structuresJulia Lawall19-19/+19
Check for rtc_class_ops structures that are only passed to devm_rtc_device_register, rtc_device_register, platform_device_register_data, all of which declare the corresponding parameter as const. Declare rtc_class_ops structures that have these properties as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct rtc_class_ops i@p = { ... }; @ok@ identifier r.i; expression e1,e2,e3,e4; position p; @@ ( devm_rtc_device_register(e1,e2,&i@p,e3) | rtc_device_register(e1,e2,&i@p,e3) | platform_device_register_data(e1,e2,e3,&i@p,e4) ) @bad@ position p != {r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct rtc_class_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: ac100: support clock-output-names in device tree bindingChen-Yu Tsai1-0/+2
The ac100 device tree binding specifies the usage of clock-output-names to specify the names of its 3 clock outputs. This is needed for orphan clock resolution, when the ac100 is probed much later than any clocks that consume any of its outputs. This wasn't supported by the driver. Add support for this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: rx6110: remove owner assignmentAlexandre Belloni1-1/+0
.owner is already set by the spi core. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: pic32: Delete owner assignmentMarkus Elfring1-1/+0
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: bq32k: Fix handling of oscillator failure flagJan Östlund1-5/+9
While the oscillator failure flag is set, the RTC registers should be considered invalid. bq32k_rtc_read_time() now returns an error instead of an invalid time. The failure flag is cleared the next time the clock is set. Signed-off-by: Jan Östlund <jao@hms.se> Signed-off-by: Daniel Romell <daro@hms.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: bq32k: Use correct mask name for 'minutes' register.Jan Östlund1-1/+1
The BQ32K_SECONDS_MASK and BQ32K_MINUTES_MASK both has the same value. This is no functional change. Signed-off-by: Jan Östlund <jao@hms.se> Signed-off-by: Daniel Romell <daro@hms.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: sysfs: fix a cast removing the const attributeLABBE Corentin1-2/+2
The char pointer buf_ptr is assigned an address from a const char pointer buf (parameter of wakealarm_store). The data pointer by buf_ptr is never modified. So casting it to a (char *) is useless. This patch remove this cast, and transform buf_ptr to a const char pointer. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: isl12057: remove driverAlexandre Belloni3-654/+0
The Intersil isl12057 is now supported by the ds1307 driver. Acked-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: ds1307: add Intersil ISL12057 supportAlexandre Belloni2-4/+10
Intersil ISL12057 is a drop-in replacement for DS1337. It can be supported by the ds1307 driver. Acked-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: ds1307: fix century bit supportAlexandre Belloni2-5/+57
Add an option to properly support the century bit of ds1337 and compatibles and ds1340. Because the driver had a bug until now, it is not possible to switch users to the fixed code directly as RTCs in the field will wrongly have the century bit set. Acked-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: pcf2123: Add missing error code assignment before testChristophe JAILLET1-2/+3
It is likely that checking the result of 'pcf2123_write_reg' is expected here. Also fix a small style issue. The '{' at the beginning of the function is misplaced. Fixes: 809b453b76e15 ("rtc: pcf2123: clean up writes to the rtc chip") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808Wadim Egorov1-2/+2
The RK808 and RK818 PMICs are using a similar register map. We can reuse the rtc driver for the RK818 PMIC. So let's add the RK818 in the Kconfig description. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31rtc: rtc-pm8xxx: Add support for pm8018 rtcNeil Armstrong1-0/+1
In order to support RTC on Qualcomm MDM9615 SoC, add support for the pm8018 rtc in rtc-pm8xxx driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-08rtc: ac100: Add clk output supportChen-Yu Tsai1-0/+302
The AC100's RTC side has 3 clock outputs on external pins, which can provide a clock signal to the SoC or other modules, such as WiFi or GSM modules. Support this with a custom clk driver integrated with the rtc driver. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-08rtc: ac100: Add RTC driver for X-Powers AC100Chen-Yu Tsai3-0/+336
X-Powers AC100 is a codec / RTC combo chip. This driver supports the RTC sub-device. The RTC block also has clock outputs and non-volatile storage. Non-volatile storage wthin the RTC hardware is not supported. Clock output support is added in the next patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-05Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds39-373/+835
Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-07-28rtc: rv8803: Clear V1F when setting the timeBenoît Thébaudeau1-1/+1
V1F indicates that the time accuracy may have been compromised because of a voltage drop (possibly only temporary) below VLOW1, which stops the temperature compensation. When the time is set, the accuracy is restored, so V1F should be cleared in order to indicate this and to be able to detect the next temperature compensation loss. This is the same principle as for V2F, which is cleared when the time is set to indicate that the time is no longer invalid and to be able to detect the next data loss. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28rtc: rv8803: Stop the clock while setting the timeBenoît Thébaudeau1-1/+17
According to the application manual of the RX8900, the RESET bit must be set to 1 to prevent a timer update while setting the time. This also resets the subsecond counter. The application manual of the RV-8803 does not mention such a requirement, and it says that the 100th Seconds register is cleared when writing to the Seconds register, but using the RESET bit for the RV-8803 too should not be an issue and is probably safer. This change also ensures that the RESET bit is initialized properly in all cases. Indeed, all the registers must be initialized if the voltage has been lower than VLOW2 (triggering V2F), but not low enough to trigger a POR. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28rtc: rv8803: Always apply the I²C workaroundBenoît Thébaudeau1-66/+113
The I²C NACK issue of the RV-8803 may occur after any I²C START condition, depending on the timings. Consequently, the workaround must be applied for all the I²C transfers. This commit abstracts the I²C transfer code into register access functions. This avoids duplicating the I²C workaround everywhere. This also avoids the duplication of the code handling the return value of i2c_smbus_read_i2c_block_data(). Error messages are issued in case of definitive register access failures (if the workaround fails). This change also makes the I²C transfer return value checks consistent. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28rtc: rv8803: Fix read day of weekBenoît Thébaudeau1-1/+2
The Weekday register is encoded as 2^tm_wday, with tm_wday in 0..6, so using tm_wday = ffs(reg) to fill tm_wday from the register value is wrong because this gives the expected value + 1. This could be fixed as tm_wday = ffs(reg) - 1, but tm_wday = ilog2(reg) works as well and is more direct. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28rtc: rv8803: Remove the check for valid timeBenoît Thébaudeau1-1/+1
The RTC core always calls rtc_valid_tm() after ->read_time() in case of success (in __rtc_read_time()), so do not call it twice. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28rtc: rv8803: Kconfig: Indicate rx8900 supportBenoît Thébaudeau1-3/+3
This driver supports the Epson RX8900, but this was not indicated in Kconfig. Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-27rtc: asm9260: remove .owner field for driverWei Yongjun1-1/+0
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-26rtc: at91sam9: Fix missing spin_lock_init()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-21rtc: m41t80: add suspend handlers for alarm IRQStefan Christ1-0/+25
Allow the alarm IRQ of RTC to be used as a wakeup source for the system suspend. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-21rtc: m41t80: make it a real error messageStefan Christ1-1/+1
It should be a real error message, when the driver cannot enable the IRQ of the device. Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: pcf85063: Add support for the PCF85063A deviceChris DeBruin1-9/+38
The current rtc-pcf85063 driver only supports the PCF85063TP device. Using the existing driver on a PCF85063A will result in the time being set correctly into the RTC, but the RTC is held in the stopped state. Therefore, the time will no longer advance and no error is indicated. The PCF85063A device has a bigger memory map than the PCF85063TP. The existing driver make use of an address rollover condition, but the rollover point is different in the two devices. Signed-off-by: Chris DeBruin <cdeb5783@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: pcf85063: fix year rangeAlexandre Belloni1-7/+5
The year range is not validated properly As the driver has been mainlined in 2014, it is not an issue to stop handling dates between 1970 and 2000 with the benefit of handling dates up to 2100. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracyUwe Kleine-König1-1/+1
Set .tm_sec to 0 instead of -1 to signal minute accuracy. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: explicitly set tm_sec = 0 for drivers with minute accurancyUwe Kleine-König5-0/+6
Since all time members of the alarm data is initialized to -1 the drivers are responsible to set the tm_sec member to 0. Fixes: d68778b80dd7 ("rtc: initialize output parameter for read alarm to "uninitialized"") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()Alim Akhtar1-0/+2
As per code flow s3c_rtc_setfreq() will get called with rtc clock disabled and in set_freq we perform h/w registers read/write, which results in a kernel crash on exynos7 platform while probing rtc driver. Below is code flow: s3c_rtc_probe() clk_prepare_enable(info->rtc_clk) // rtc clock enabled s3c_rtc_gettime() // will enable clk if not done, and disable it upon exit s3c_rtc_setfreq() //then this will be called with clk disabled This patch take cares of such issue by adding s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq(). Fixes: 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock control") Cc: <stable@vger.kernel.org> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: s3c: Remove unnecessary call to disable already disabled clockAlim Akhtar1-2/+0
At the end of s3c_rtc_probe(), s3c_rtc_disable_clk() being called with rtc clock already disabled (by s3c_rtc_gettime()), which looks extra and unnecessary call. Lets clean it up. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: abx80x: use devm_add_action_or_reset()Sudip Mukherjee1-7/+5
If devm_add_action() fails we are explicitly calling the cleanup to free the resources allocated. Lets use the helper devm_add_action_or_reset() and return directly in case of error, as we know that the cleanup function has been already called by the helper if there was any error. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19rtc: m41t80: use devm_add_action_or_reset()Sudip Mukherjee1-3/+2
If devm_add_action() fails we are explicitly calling the cleanup to free the resources allocated. Lets use the helper devm_add_action_or_reset() and return directly in case of error, as we know that the cleanup function has been already called by the helper if there was any error. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: fix a typo and reduce three empty lines to oneUwe Kleine-König1-3/+1
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: s35390a: improve two comments in .set_alarmUwe Kleine-König1-2/+2
Be more explicit in some comments. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: s35390a: improve irq handlingUwe Kleine-König1-17/+31
On some QNAP NAS devices the rtc can wake the machine. Several people noticed that once the machine was woken this way it fails to shut down. That's because the driver fails to acknowledge the interrupt and so it keeps active and restarts the machine immediatly after shutdown. See https://bugs.debian.org/794266 for a bug report. Doing this correctly requires to interpret the INT2 flag of the first read of the STATUS1 register because this bit is cleared by read. Note this is not maximally robust though because a pending irq isn't detected when the STATUS1 register was already read (and so INT2 is not set) but the irq was not disabled. But that is a hardware imposed problem that cannot easily be fixed by software. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-11rtc: s35390a: implement reset routine as suggested by the referenceUwe Kleine-König1-10/+55
There were two deviations from the reference manual: you have to wait half a second when POC is active and you might have to repeat initialization when POC or BLD are still set after the sequence. Note however that as POC and BLD are cleared by read the driver might not be able to detect that a reset is necessary. I don't have a good idea how to fix this. Additionally report the value read from STATUS1 to the caller. This prepares the next patch. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.