aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/block (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-09-04s390/irq: rework irq subclass handlingHeiko Carstens1-2/+2
Let's not add a function for every external interrupt subclass for which we need reference counting. Just have two register/unregister functions which have a subclass parameter: void irq_subclass_register(enum irq_subclass subclass); void irq_subclass_unregister(enum irq_subclass subclass); Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-08-28s390/dasd: fix statistics for recovered requestsStefan Weinhuber1-0/+8
When a recovery cqr is cleaned up, copy the start time, stop time, and start device to the original cqr. These times are needed later when the original request is finalized and counted in the DASD statistics. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390/dasd: enable raw_track_access reads without direct I/OStefan Weinhuber1-11/+43
The ECKD protocol supports reading of tracks with arbitrary format as raw track images. The DASD device driver supports this in its raw_track_access mode. In this mode it maps each track to sixteen 4096 byte sectors and rejects all requests that are not properly aligned to this mapping. An application that wants to use a DASD in raw_track_access mode will usually use direct I/O to make sure that properly aligned requests are directly submitted to the driver. However, applications that are not aware of this mode, e.g. udev, will encounter I/O errors. To make the use without direct I/O possible and avoid this kind of alignment errors, we now pad unaligned read requests with a dummy page, so that we can always read full tracks. Please note that writing is still only possible for full track images that are properly aligned. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390/dasd: cleanup timeout and transport error messagesStefan Weinhuber1-2/+4
Just a small update to the wording of the messages, to bring them more in line with our other messages. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390: replace strict_strtoul() with kstrtoul()Jingoo Han1-4/+4
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-30s390/dasd: fix hanging devices after path eventsStefan Haberland1-0/+6
The processing of the dasd_block tasklet may have been interrupted by a path event. Restart the dasd tasklets in sleep_on_immediately function. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: Fail all requests when DASD_FLAG_ABORTIO is setHannes Reinecke3-3/+72
Whenever a DASD request encounters a timeout we might need to abort all outstanding requests on this or even other devices. This is especially useful if one wants to fail all devices on one side of a RAID10 configuration, even though only one device exhibited an error. To handle this I've introduced a new device flag DASD_FLAG_ABORTIO. This flag is evaluated in __dasd_process_request_queue() and will invoke blk_abort_request() for all outstanding requests with DASD_CQR_FLAGS_FAILFAST set. This will cause any of these requests to be aborted immediately if the blk_timeout function is activated. The DASD_FLAG_ABORTIO is also evaluated in __dasd_process_request_queue to abort all new request which would have the DASD_CQR_FLAGS_FAILFAST bit set. The flag can be set with the new ioctls 'BIODASDABORTIO' and removed with 'BIODASDALLOWIO'. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: Add 'timeout' attributeHannes Reinecke3-0/+62
This patch adds a 'timeout' attibute to the DASD driver. When set to non-zero, the blk_timeout function will be enabled with the timeout specified in the attribute. Setting 'timeout' to '0' will disable block timeouts. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01block/dasd: detailed I/O errorsHannes Reinecke1-3/+13
The DASD driver is using FASTFAIL as an equivalent to the transport errors in SCSI. And the 'steal lock' function maps roughly to a reservation error. So we should be returning the appropriate error codes when completing a request. Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: Reduce amount of messages for specific errorsHannes Reinecke1-0/+8
Whenever a request has been aborted internally by the driver there is no sense data to be had. And printing lots of messages stalls the system, so better to print out a short one-liner. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: Implement block timeout handlingHannes Reinecke4-2/+88
This patch implements generic block layer timeout handling callbacks for DASDs. When the timeout expires the respective cqr is aborted. With this timeout handler time-critical request abort is guaranteed as the abort does not depend on the internal state of the various DASD driver queues. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: process all requests in the device taskletHannes Reinecke1-2/+2
Originally the DASD device tasklet would process the entries on the ccw_queue until the first non-final request was found. Which was okay as long as all requests have the same retries and expires parameter. However, as we're now allowing to modify both it is possible to have requests _after_ the first request which already have expired. So we need to check all requests in the device tasklet. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: make number of retries configurableHannes Reinecke5-6/+57
Instead of having the number of retries hard-coded in the various functions we should be using a default retry value, which can be modified via sysfs. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-01s390/dasd: Clarify commentHannes Reinecke1-3/+1
dasd_cancel_req will never return 1, only 0. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-26s390/dasd: Cocci spatch "ptr_ret.spatch"Thomas Meyer1-1/+1
Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-31s390/dasd: fix handling of gone pathsStefan Weinhuber1-2/+10
When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-0/+1
Pull s390 update from Martin Schwidefsky: "An additional sysfs attribute for channel paths and a couple of bux fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: fix ipte notify bit s390/xpram: mark xpram as non-rotational s390/smp: fix cpu re-scan vs. cpu state s390/cio: add channel ID sysfs attribute s390/ftrace: fix mcount adjustment s390: fix gmap_ipte_notifier vs. software dirty pages s390: disable pfmf for clear page instruction s390/disassembler: prevent endless loop in print_fn_code() s390: remove non existent reference to GENERIC_KERNEL_THREAD
2013-05-17s390/xpram: mark xpram as non-rotationalChristian Borntraeger1-0/+1
xpram is a memory technology. Lets mark that as non-rotational. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07block_device_operations->release() should return voidAl Viro3-21/+12
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-26s390/scm_blk: fix memleak in init functionSebastian Ott1-2/+1
If the allocation of a single request fails the already allocated requests will not be freed. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-26s390/scm_blk: allow more cluster size valuesSebastian Ott1-2/+4
Allow 0 and powers of 2 between 2 and 128 for write_cluster_size. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dasd: fix hanging device after resume with internal error 13Stefan Haberland1-8/+55
If too many ccw requests are pre-build before a suspend/resume cycle the device might not get enough memory to do path verification during resume. Requeue requests to the block device request queue on suspend and free pre-build ccw requests. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dasd: improve speed of dasdfmtStefan Haberland4-143/+351
Reorganize format IO requests and enable usage of PAV. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/dasd: remove cast for kzalloc return valueZhang Yanfei1-2/+1
remove cast for kzalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-04-02Merge branch 'writeback-workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq into for-3.10/coreJens Axboe3-13/+81
Tejun writes: ----- This is the pull request for the earlier patchset[1] with the same name. It's only three patches (the first one was committed to workqueue tree) but the merge strategy is a bit involved due to the dependencies. * Because the conversion needs features from wq/for-3.10, block/for-3.10/core is based on rc3, and wq/for-3.10 has conflicts with rc3, I pulled mainline (rc5) into wq/for-3.10 to prevent those workqueue conflicts from flaring up in block tree. * Resolving the issue that Jan and Dave raised about debugging requires arch-wide changes. The patchset is being worked on[2] but it'll have to go through -mm after these changes show up in -next, and not included in this pull request. The three commits are located in the following git branch. git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git writeback-workqueue Pulling it into block/for-3.10/core produces a conflict in drivers/md/raid5.c between the following two commits. e3620a3ad5 ("MD RAID5: Avoid accessing gendisk or queue structs when not available") 2f6db2a707 ("raid5: use bio_reset()") The conflict is trivial - one removes an "if ()" conditional while the other removes "rbi->bi_next = NULL" right above it. We just need to remove both. The merged branch is available at git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git block-test-merge so that you can use it for verification. The test merge commit has proper merge description. While these changes are a bit of pain to route, they make code simpler and even have, while minute, measureable performance gain[3] even on a workload which isn't particularly favorable to showing the benefits of this conversion. ---- Fixed up the conflict. Conflicts: drivers/md/raid5.c Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-03-23block: Add bio_end_sector()Kent Overstreet1-2/+1
Just a little convenience macro - main reason to add it now is preparing for immutable bio vecs, it'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: Lars Ellenberg <drbd-dev@lists.linbit.com> CC: Jiri Kosina <jkosina@suse.cz> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: linux-s390@vger.kernel.org CC: Chris Mason <chris.mason@fusionio.com> CC: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2013-03-21s390/scm_blk: fix error return code in scm_blk_init()Wei Yongjun1-2/+5
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21s390/scm_block: fix printk format stringSebastian Ott2-3/+3
Use hex digits when referring to scm addresses. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07s390/scm: process availabilitySebastian Ott1-0/+7
Let the bus code process scm availability information and notify scm device drivers about the new state. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07s390/scm_blk: suspend writesSebastian Ott2-5/+58
Stop writing to scm after certain error conditions such as a concurrent firmware upgrade. Resume to normal state once scm_blk_set_available is called (due to an scm availability notification). Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07s390/scm_drv: extend notify callbackSebastian Ott1-6/+10
Extend the notify callback of scm_driver by an event parameter to allow to distinguish between different notifications. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07s390/scm_blk: fix request number accountingSebastian Ott1-2/+6
If a block device driver cannot fetch all requests from the blocklayer it's in his responsibility to call the request function at a later time. Normally this would be done after the next irq for the underlying device is handled. However in situations where we have no outstanding request we have to schedule the request function for a later time. This is determined using an internal counter of requests issued to the hardware. In some cases where we give a request back to the block layer unhandled the number of queued requests was not adjusted. Fix this class of failures by adjusting queued_requests in all functions used to give a request back to the block layer. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28s390/dasd: fix unresponsive device after all channel paths were lostStefan Haberland1-2/+8
Failfast bit was set incorrectly. Use set_bit to enable failfast. Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14dasd: fix sysfs cleanup in dasd_generic_removeStefan Weinhuber1-1/+4
When the DASD devices are detached from the driver, then the dasd_generic_remove function is called. One of the things this function should do is to remove the DASD specific sysfs attributes, but this is not done in all cases. This is likely to cause an oops when at a later point sysfs stumbles over the stale pointers. In particular this happens when when the modules are unloaded and loaded again. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/time: rename tod clock access functionsHeiko Carstens8-39/+39
Fix name clash with some common code device drivers and add "tod" to all tod clock access function names. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/scm: use inline dummy functionsSebastian Ott1-13/+28
Convert the defines for the !CONFIG_SCM* stuff to static inline functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens3-3/+3
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds6-81/+178
Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
2012-11-30s390/dasd: add safe offline interfaceStefan Haberland3-17/+116
The regular behavior of the DASD device driver when setting a device offline is to return all outstanding I/O as failed. This behavior is different from that of other System z operating systems and may lead to unexpected data loss. Adding an explicit 'safe' offline function will allow customers to use DASDs in the way they expect them to work. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-30s390/dasd: fix unaccessible device after resumeStefan Haberland1-9/+7
If a channel path is cabled incorrectly and the device is suspended and resumed the device may be inaccessible afterwards. Make the path connection check not interrupt the resume callback there could be other valid paths available. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reference-ID: RQM 1262 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23s390: use ccw_device_get_schidSebastian Ott1-4/+7
Let the dasd driver and qdio use ccw_device_get_schid and get rid of other similar functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23s390/dasd: fix multi-line printks with multiple KERN_<level>sSebastian Ott2-51/+48
Do not use more than one KERN_<level> per printk. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-19Fix misspellings of "whether" in comments.Adam Buchbinder1-1/+1
"Whether" is misspelled in various comments across the tree; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-09s390/dcssblk: cleanup device attribute usageSebastian Ott1-29/+23
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/dasd: check count address during online settingStefan Haberland1-2/+12
A common way to prepare a z/VM mini disk is to format the real device with a z/VM tool like CPFMTXA and then define a mini disk that excludes the first cylinder, i.e. the cylinder 0 of the virtual disk is located at cylinder 1 of the real device. The DASD device driver will recognize such a mini disk as formatted, as the uniform record layout on the disk matches that of an LDL formatted device. However, the cylinder value in the 'count' field of the ECKD records matches the geometry of the real device, and not that of the mini disk, so I/O requests will fail with 'record not found' errors. To make the mini disk usable, it needs to be formatted with a tool like dasdfmt. To enable tools like distribution installation tools to recognize this situation, the DASD device driver should report such a mini disk as 'not formatted'. To this end we need to extend the device recognition code to check not just for proper record sizes, but also for proper cylinder/head/record values. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/etr,stp: use -EOPNOTSUPP instead of -ENOSYSHeiko Carstens1-2/+2
Change -ENOSYS to -EOPNOTSUPP. Return value is used only internally. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/dasd: fix return value for non-existent ioctlsHeiko Carstens1-2/+2
For non-existent ioctls -ENOTTY should be returned. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: reorder scm_removeSebastian Ott1-1/+1
Do not reset drvdata before the block device is cleaned up. With a non-empty block queue drvdata could be accessed. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: remove superfluous lockSebastian Ott1-10/+1
Remove the spinlock from struct scm_device. drvdata and attributes are guarded via device_lock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.