aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/block (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-10-09s390/dcssblk: cleanup device attribute usageSebastian Ott1-29/+23
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/dasd: check count address during online settingStefan Haberland1-2/+12
A common way to prepare a z/VM mini disk is to format the real device with a z/VM tool like CPFMTXA and then define a mini disk that excludes the first cylinder, i.e. the cylinder 0 of the virtual disk is located at cylinder 1 of the real device. The DASD device driver will recognize such a mini disk as formatted, as the uniform record layout on the disk matches that of an LDL formatted device. However, the cylinder value in the 'count' field of the ECKD records matches the geometry of the real device, and not that of the mini disk, so I/O requests will fail with 'record not found' errors. To make the mini disk usable, it needs to be formatted with a tool like dasdfmt. To enable tools like distribution installation tools to recognize this situation, the DASD device driver should report such a mini disk as 'not formatted'. To this end we need to extend the device recognition code to check not just for proper record sizes, but also for proper cylinder/head/record values. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/etr,stp: use -EOPNOTSUPP instead of -ENOSYSHeiko Carstens1-2/+2
Change -ENOSYS to -EOPNOTSUPP. Return value is used only internally. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/dasd: fix return value for non-existent ioctlsHeiko Carstens1-2/+2
For non-existent ioctls -ENOTTY should be returned. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: reorder scm_removeSebastian Ott1-1/+1
Do not reset drvdata before the block device is cleaned up. With a non-empty block queue drvdata could be accessed. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: remove superfluous lockSebastian Ott1-10/+1
Remove the spinlock from struct scm_device. drvdata and attributes are guarded via device_lock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm_block: force cluster writesSebastian Ott5-3/+310
Force writes to Storage Class Memory (SCM) to be in done in clusters. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add scm block driverSebastian Ott5-0/+597
Block device driver for Storage Class Memory (SCM). This driver provides a block device interface for each available SCM increment. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add eadm facility bitsSebastian Ott1-2/+1
Add the eadm facility bits to the css characteristics and move them to a new header. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-17s390/dasd: fix read unit address configuration loopStefan Haberland1-1/+26
Read unit address is done for all devices during online processing to read out LCU features. This is also done after disconnect/connect a LCU. Some older storage hardware does not provide the capability to read unit address configuration. This leads to a loop trying to read unit address configuration every 30 seconds. The device is still operational but logs are flooded with error messages. Fix the loop by recognizing a command reject saying that the suborder for ruac is not supported. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-17s390/dasd: fix pathgroup raceStefan Haberland2-7/+36
If a new path is available we need to verify the path data. If it is the first path for a device the stop bits are removed after path verification. If a pathgroup is established we need to set system characteristics for the lcu. Therefore I/O has to be started. If the device is stopped the set system characteristics worker may block the path verification worker and the device is blocked. Turn on failfast for set system characteristics CQR to prevent a deadlock with the path verification worker. If a pathgroup is established on a device that is not in use trigger path verification. Maybe we were not informed about a working path. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-06s390/dasd: move wake_up callSebastian Ott1-3/+3
Ensure that all work is done when the process waiting for a dasd state change is woken up. With this change it is save to assume that after a userspace triggered state change and a udev settle invocation there are no unexpected users of a dasd device. Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-28s390/dasd: fix ioctl return valueHeiko Carstens2-6/+3
For unimplemented ioctls the dasd driver should return -ENOTTY. Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens16-27/+13
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-16s390/dasd: add shutdown actionStefan Haberland3-0/+34
Add a mechanism to wait for outstanding IO during shutdown. Schedule the block_bh and device_bh and wait until our request queues are empty. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-05-24s390/headers: remove #ifdef __KERNEL__ from not exported headersHeiko Carstens1-4/+0
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-04-11[S390] drivers/s390/block/dasd_eckd.c: add missing dasd_sfree_requestJulia Lawall1-8/+16
Extend some error paths to call dasd_sfree_request as done earlier in the function. The error-handling code is also moved to the end of the function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11[S390] dasd: prevent validate server for offline devicesStefan Haberland2-0/+12
Calling validate server on devices in offline processing may cause an OOPS in the dasd_sleep_on function. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11[S390] irq: external interrupt code passingHeiko Carstens1-4/+4
The external interrupt handlers have a parameter called ext_int_code. Besides the name this paramter does not only contain the ext_int_code but in addition also the "cpu address" (POP) which caused the external interrupt. To make the code a bit more obvious pass a struct instead so the called function can easily distinguish between external interrupt code and cpu address. The cpu address field however is named "subcode" since some external interrupt sources do not pass a cpu address but a different parameter (or none at all). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-02-27compat: fix compile breakage on s390Heiko Carstens2-1/+2
The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18[S390] dasd: revalidate server for new pathgroupStefan Haberland3-0/+30
If a pathgroup is established we get an event and have to revalidate the server to propagate supported features like PAV and enable them. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-01-18[S390] dasd: revert LCU optimizationStefan Haberland2-89/+16
Remove the optimization that validate server is only called once per LCU. If a device is set online we only know that we already know the LCU. But if the pathgroup was lost in between we have to do a validate server again to activate some features. Since we have no indication when a pathgroup gets lost we have to do a validate server every time a device is set online. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-01-09Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds3-112/+313
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) [S390] disassembler: mark exception causing instructions [S390] Enable exception traces by default [S390] return address of compat signals [S390] sysctl: get rid of dead declaration [S390] dasd: fix fixpoint divide exception in define_extent [S390] dasd: add sanity check to detect path connection error [S390] qdio: fix kernel panic for zfcp 31-bit [S390] Add s390x description to Documentation/kdump/kdump.txt [S390] Add VMCOREINFO_SYMBOL(high_memory) to vmcoreinfo [S390] dasd: fix expiration handling for recovery requests [S390] outstanding interrupts vs. smp_send_stop [S390] ipc: call generic sys_ipc demultiplexer [S390] zcrypt: Fix error return codes. [S390] zcrypt: Rework length parameter checking. [S390] cleanup trap handling [S390] Remove Kerntypes leftovers [S390] topology: increase poll frequency if change is anticipated [S390] entry[64].S improvements [S390] make arch/s390 subdirectories depend on config option [S390] kvm: move cmf host id constant out of lowcore ... Fix up conflicts in arch/s390/kernel/{smp.c,topology.c} due to the sysdev removal clashing with "topology: get rid of ifdefs" which moved some of that code around.
2012-01-08Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-3/+2
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-06Merge branches 'vfsmount-guts', 'umode_t' and 'partitions' into ZAl Viro1-3/+2
2012-01-03switch debugfs to umode_tAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03fs: move code out of buffer.cAl Viro1-1/+0
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-27[S390] dasd: fix fixpoint divide exception in define_extentStefan Haberland2-1/+11
If an IO request is build on an alias device without prefix enabled we try to calculate with zero data from the alias device. This triggers a BUG statement with fixpoint divide exception. This case is very unlikely and can only happen if the pathgroup is lost with an alias device already in use. Prevent the alias device from being used in this case. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27[S390] dasd: add sanity check to detect path connection errorStefan Haberland1-109/+300
Prevents possible data corruption by detecting cabling error. Therefor read and compare the UID for all available channel paths. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27[S390] dasd: fix expiration handling for recovery requestsStefan Weinhuber1-2/+2
The 'expires' value of a ccw requests defines how long the device driver should wait for a response from the evice after the request has been submitted to the channel subsystem. After the expiration time (e.g. 30 seconds) the waiting request will be cancelled and started again. This protects the DASD devices from beeing blocked by errors that cause the answering I/O interrupt to be lost. In case of error recovery requests, this 'expires' value used to be set to 0, so in case of a lost interrupt, such a recovery request would never expire and block the device. To prevent this kind of problem, all recovery requests need to have an expires value > 0 as well. If not specified otherwise, this should be the same expires value as for the original request. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-21driver-core: remove sysdev.h usage.Kay Sievers1-1/+1
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-7/+5
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-10-30[S390] sparse: fix sparse NULL pointer warningsMartin Schwidefsky1-2/+2
Fix two NULL pointer warnings in the dasd driver: drivers/s390/block/dasd_eckd.c:2353:20: warning: Using plain integer as NULL pointer drivers/s390/block/dasd_eckd.c:2415:44: warning: Using plain integer as NULL pointer Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] dasd: prevent path verification before resumeStefan Haberland3-2/+17
Mark the device as suspended and delay execution of the path verification worker to prevent mix-up. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] dasd: re-initialize read_conf buffer for retriesStefan Haberland3-2/+32
The buffer for read configuration data has to be initialized with an EBCDIC string to show support for extended UIDs to z/VM. If this read configuration data CQR needs to be retried, the buffer may have changed in between. So re-initialize the buffer to get a correct extended UID under z/VM. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] dasd: wait for terminated requestStefan Haberland1-1/+5
After terminating a request in the dasd_sleep_on_immediatly function, wait for the clear interrupt to be received before starting the new request. This prevents the requests from getting mixed up. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix mismatch in summation of I/O IRQ statisticsPeter Oberparleiter3-2/+2
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-19Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe1-3/+7
Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-12block: remove support for bio remapping from ->make_requestChristoph Hellwig2-7/+5
There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24[S390] drivers/s390/block/dasd_ioctl.c: add missing kfreeJulia Lawall1-3/+7
Data is only used to temporarily hold information to be copied to the user level, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-08-03[S390] dasd: check if raw track access is supportedStefan Haberland1-0/+9
To use raw track access some special storage server commands are needed. Older storage hardware may not support these commands. So check if raw track access is possible while setting the DASD online. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03[S390] dasd: use vmalloc for statistics input bufferStefan Weinhuber2-6/+7
The size of the buffer that is used to store DASD statistics input strings depends on the user input. If the input string is to large, the write operation could fail with -ENOMEM. To avoid this, use vmalloc instead of kmalloc. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-24[S390] dasd: add enhanced DASD statistics interfaceStefan Weinhuber4-91/+686
This patch extends the DASD statistics to allow for a more detailed analysis of DASD I/O operations. In particular we want the statistics to provide answers to the following questions: - How many requests used a PAV alias? - How many requests used High Performance FICON? - How do read request perform versus write requests? The existing DASD statistics interface has several shortcomings - The interface for global data is a formatted text table in procfs (/proc/dasd/statistics). The layout is meant for human readers and is not to easy to parse. If values get to large for the table layout, they get scaled down. - The statistics which are collected per block device can be accessed via an ioctl interface, which can only be extended by defining a new ioctl. - There is no statistics interface for individual PAV base and alias devices. To overcome theses shortcomings we create a new DASD statistics interface in debugfs. This interface will contain one entry for global data, one per DASD block device, and one per DASD base and alias device. Each file contains the statistic data in easy to parse name/value and name/array pairs. The existing interfaces will remain functional, but they will not be extended. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: merge irq.c and s390_ext.cHeiko Carstens1-1/+1
Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] irq: fix service signal external interrupt handlingHeiko Carstens1-2/+2
Interrupt sources like pfault, sclp, dasd_diag and virtio all use the service signal external interrupt subclass mask in control register 0 to enable and disable the corresponding interrupt. Because no reference counting is implemented each subsystem thinks it is the only user of subclass and sets and clears the bit like it wants. This leads to case that unloading the dasd diag module under z/VM causes both sclp and pfault interrupts to be masked. The result will be locked up system sooner or later. Fix this by introducing a new way to set (register) and clear (unregister) the service signal subclass mask bit in cr0. Also convert all drivers. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] dasd: fix return code handlingHeiko Carstens1-2/+1
Check return value of itcw_add_dcw() for error code and return it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-23[S390] get rid of unused variablesHeiko Carstens2-12/+0
Remove trivially unused variables as detected with -Wunused-but-set-variable. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-10[S390] dasd: prevent IO error during reserve/release loopStefan Haberland1-1/+10
The termination of running CQR caused by reserve/release operations may lead to an IO error if reserve/release is done in a tight loop. Prevent this by increasing the retry counter after termination. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-29[S390] irqstats: fix counting of pfault, dasd diag and virtio irqsHeiko Carstens1-1/+1
pfault, dasd diag and virtio all use the same external interrupt number. The respective interrupt handlers decide by the subcode if they are meant to handle the interrupt. Counting is currently done before looking at the subcode which means each handler counts an interrupt even if it is not handling it. Fix this by moving the kstat code after the code which looks at the subcode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.