aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/block (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-18Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-1/+1
Pull libnvdimm updates from Dan Williams: "Primarily just the virtio_pmem driver: - virtio_pmem The new virtio_pmem facility introduces a paravirtualized persistent memory device that allows a guest VM to use DAX mechanisms to access a host-file with host-page-cache. It arranges for MAP_SYNC to be disabled and instead triggers a host fsync() when a 'write-cache flush' command is sent to the virtual disk device. - Miscellaneous small fixups" * tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: virtio_pmem: fix sparse warning xfs: disable map_sync for async flush ext4: disable map_sync for async flush dax: check synchronous mapping is supported dm: enable synchronous dax libnvdimm: add dax_dev sync flag virtio-pmem: Add virtio pmem driver libnvdimm: nd_region flush callback support libnvdimm, namespace: Drop uuid_t implementation detail
2019-07-11s390/dasd: Handle out-of-space constraintJan Höppner5-3/+243
The storage server issues three different types of out-of-space messages whenever the Extent Pool or Extent Repository space runs short. When a configured warning watermark is reached, the physical space is completeley exhausted, or the capacity constraints have been relieved, a message is received. A log entry for the sysadmin to react to is generated in any case. In case the physical space is completely exhausted, sense data that reads "no space left on device" is received. In this case, currently running I/O will be blocked until space has either been released or added to the extent pool, and a relieve message was received via an attention interrupt. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add discard support for ESE volumesJan Höppner1-3/+54
ESE (Extent Space Efficient) volumes are thin-provisioned and therefore space is only occupied with real data. In order to make previously used space available for re-allocation again, discard support is enabled for ESE volumes allowing the DASD driver to release said space. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Use ALIGN_DOWN macroJan Höppner1-1/+1
There is now an ALIGN_DOWN macro available. Let's rather use kernel provided macros that do the things we want. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Make dasd_setup_queue() a discipline functionJan Höppner7-80/+103
ECKD, FBA, and the DIAG discipline use slightly different block layer settings. In preparation of even more diverse queue settings, make dasd_setup_queue() a discipline function. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add new ioctl to release spaceJan Höppner4-0/+361
Userspace tools might have the need to release space for Extent Space Efficient (ESE) volumes when working with such a device. Provide the necessarry interface for such a task by implementing a new ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for data input: typedef struct format_data_t { unsigned int start_unit; /* from track */ unsigned int stop_unit; /* to track */ unsigned int blksize; /* sectorsize */ unsigned int intensity; } format_data_t; If the intensity is set to 0x40, start_unit and stop_unit are ignored and space for the entire volume is released. Otherwise, if intensity is set to 0, the respective range is released (if possible). Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add dasd_sleep_on_queue_interruptible()Jan Höppner2-0/+10
There is dasd_sleep_on() and dasd_sleep_on_interruptible() to start CCW requests uninterruptible and interruptible. However, there is only dasd_sleep_on_queue() to start requests from CCW queues uninterruptible. Add dasd_sleep_on_queue_interruptible() to provide a way to start requests from CCW queues interruptible. _dasd_sleep_on_queue() already provides this functionality. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add dynamic formatting support for ESE volumesJan Höppner3-14/+239
A dynamic formatting is issued whenever a write request returns with either a No Record Found error (Command Mode), Incorrect Length error (Transport Mode), or File Protected error (Transport Mode). All three cases mean that the tracks in question haven't been initialized in a desired format yet. The part of the volume that was tried to be written on is then formatted and the original request is re-queued. As the formatting will happen during normal I/O operations, it is quite likely that there won't be any memory available to build the respective request. Another two pages of memory are allocated per volume specifically for the dynamic formatting. The dasd_eckd_build_format() function is extended to make sure that the original startdev is reused. Also, all formatting and format check functions use the new memory pool exclusively now to reduce complexity. Read operations will always return zero data when unformatted areas are read. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Recognise data for ESE volumesJan Höppner4-4/+430
In order to work with Extent Space Efficient (ESE) volumes, certain viable information about those volumes and the corresponding extent pool (such as extent size, configured space, allocated space, etc.) can be provided. Use the CCW commands Volume Storage Query and Logical Configuration Query to receive detailed information about ESE volumes and the extent pool respectively. These information are made accessible via internal functions for subsequent users, and via sysfs attributes for userpsace usage. The new sysfs attributes reside in separate directories called capacity and extent_pool. attributes: ese: 0/1 depending on whether the volume is an ESE volume Capacity related attributes: space_allocated: Space currently allocated by the volume (in cyl) space_configured: Remaining space in the extent pool (in cyl) logical_capacity: The entire addressable space for this volume (in cyl) Extent Pool related attributes: pool_id: ID of the extent pool the volume in question resides in pool_oos: Extent pool is out-of-space extent_size: Size of a single extent in this pool cap_at_warnlevel Extent pool capacity at warn level warn_threshold: Threshold at which percentage of remaining extent pool space a warning message is issued Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Put sub-order definitions in a separate sectionJan Höppner1-2/+6
There are orders and sub-orders. Put them in different sections for a better overview. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Make layout analysis ESE compatibleJan Höppner1-6/+6
The disk layout and volume information of a DASD reside in the first two tracks of cylinder 0. When a DASD is set online, currently the first three tracks are read and analysed to confirm an expected layout. For CDL (Compatible Disk Layout) only count area data of the first track is evaluated and checked against expected key and data lengths. For LDL (Linux Disk Layout) the first and third track is evaluated. However, an LDL formatted volume is expected to be in the same format across all tracks. Checking the third track therefore doesn't have any more value than checking any other track at random. Now, an Extent Space Efficient (ESE) DASD is initialised by only formatting the first two tracks, as those tracks always contain all information necessarry. Checking the third track on an ESE volume will therefore most likely fail with a record not found error, as the third track will be empty. This in turn leads to the device being recognised with a volume size of 0. Attempts to write volume information on the first two tracks then fail with "no space left on device" errors. Initialising the first three tracks for an ESE volume is not a viable solution, because the third track is already a regular track and could contain user data. With that there is potential for data corruption. Instead, always only analyse the first two tracks, as it is sufficiant for both CDL and LDL, and allow ESE volumes to be recognised as well. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Remove old defines and functionJan Höppner1-21/+0
Commit 4d284cac76d0 ("[S390] Avoid excessive inlining.") removed bytes_per_record() which was the only user of the defines ECKD_C0 and ECKD_F*, and round_up_multiple(). Let's get rid of those. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Remove unused structs and function prototypesJan Höppner1-25/+0
There are structs that have never been used. There are also two function prototypes which were forgotton in commit f9f8d02fae0d ("[S390] dasd: revert LCU optimization"). Clean up and keep the header file tidy. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-05libnvdimm: add dax_dev sync flagPankaj Gupta1-1/+1
This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-02s390/dasd: Fix a precision vs width bug in dasd_feature_list()Dan Carpenter1-1/+1
The "len" variable is the length of the option up to the next option or to the end of the string which ever first. We want to print the invalid option so we want precision "%.*s" but the format is width "%*s" so it prints up to the end of the string. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-04s390/Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult1-1/+1
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-05-20dax: Arrange for dax_supported check to span multiple devicesDan Williams1-0/+1
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-09s390/dasd: fix build warning in dasd_eckd_build_cp_rawMing Lei1-1/+1
Commit 72deb455b5ec619f ("block: remove CONFIG_LBDAF") changes sector_t to u64 unconditionaly, so apply '%llu' for print sector_t variable. Fixes: 72deb455b5ec619f ("block: remove CONFIG_LBDAF") Cc: linux-s390@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-29s390/dasd: Fix capacity calculation for large volumesPeter Oberparleiter1-3/+3
The DASD driver incorrectly limits the maximum number of blocks of ECKD DASD volumes to 32 bit numbers. Volumes with a capacity greater than 2^32-1 blocks are incorrectly recognized as smaller volumes. This results in the following volume capacity limits depending on the formatted block size: BLKSIZE MAX_GB MAX_CYL 512 2047 5843492 1024 4095 8676701 2048 8191 13634816 4096 16383 23860929 The same problem occurs when a volume with more than 17895697 cylinders is accessed in raw-track-access mode. Fix this problem by adding an explicit type cast when calculating the maximum number of blocks. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-05Merge tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-14/+5
Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
2019-03-01s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=yMartin Schwidefsky1-14/+5
The dasd_eckd_restore_device() function calls dasd_generic_read_dev_chars with a temporary buffer on the stack. With CONFIG_VMAP_STACK=y this is a vmalloc address but dasd_generic_restore_device() uses the address of the buffer as I/O address. Circumvent this by using the already allocated cqr->data buffer for the RDC data. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28s390/dasd: fix using offset into zero size array errorStefan Haberland1-0/+8
Dan Carpenter reported the following: The patch 52898025cf7d: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-02Merge tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-16/+2
Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility()
2018-12-13s390/drivers: fix proc/debugfs file permissionsSebastian Ott1-2/+1
Remove write permissions for fops without a write callback. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13s390: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li1-14/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-07dasd: remove dead codeJens Axboe1-17/+5
Since e443343e509a we haven't had a request_fn attached to this driver, hence any code inside an if (q->request_fn) is unreachable. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") [sth: Keep and fix the dasd_info->chanq_len counter.] Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-23Merge tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-4/+2
Pull s390 updates from Martin Schwidefsky: - Improved access control for the zcrypt driver, multiple device nodes can now be created with different access control lists - Extend the pkey API to provide random protected keys, this is useful for encrypted swap device with ephemeral protected keys - Add support for virtually mapped kernel stacks - Rework the early boot code, this moves the memory detection into the boot code that runs prior to decompression. - Add KASAN support - Bug fixes and cleanups * tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) s390/pkey: move pckmo subfunction available checks away from module init s390/kasan: support preemptible kernel build s390/pkey: Load pkey kernel module automatically s390/perf: Return error when debug_register fails s390/sthyi: Fix machine name validity indication s390/zcrypt: fix broken zcrypt_send_cprb in-kernel api function s390/vmalloc: fix VMALLOC_START calculation s390/mem_detect: add missing include s390/dumpstack: print psw mask and address again s390/crypto: Enhance paes cipher to accept variable length key material s390/pkey: Introduce new API for transforming key blobs s390/pkey: Introduce new API for random protected key verification s390/pkey: Add sysfs attributes to emit secure key blobs s390/pkey: Add sysfs attributes to emit protected key blobs s390/pkey: Define protected key blob format s390/pkey: Introduce new API for random protected key generation s390/zcrypt: add ap_adapter_mask sysfs attribute s390/zcrypt: provide apfs failure code on type 86 error reply s390/zcrypt: zcrypt device driver cleanup s390/kasan: add support for mem= kernel parameter ...
2018-09-28block: genhd: add 'groups' argument to device_add_diskHannes Reinecke3-3/+3
Update device_add_disk() to take an 'groups' argument so that individual drivers can register a device with additional sysfs attributes. This avoids race condition the driver would otherwise have if these groups were to be created with sysfs_add_groups(). Signed-off-by: Martin Wilck <martin.wilck@suse.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20s390/dasd: remove unnecessary condition checkChengguang Xu1-4/+2
kmem_cache_destroy() can handle NULL pointer correctly, so there is no need to check NULL pointer before calling kmem_cache_destroy(). Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-25Merge tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-3/+5
Pull libnvdimm updates from Dave Jiang: "Collection of misc libnvdimm patches for 4.19 submission: - Adding support to read locked nvdimm capacity. - Change test code to make DSM failure code injection an override. - Add support for calculate maximum contiguous area for namespace. - Add support for queueing a short ARS when there is on going ARS for nvdimm. - Allow NULL to be passed in to ->direct_access() for kaddr and pfn params. - Improve smart injection support for nvdimm emulation testing. - Fix test code that supports for emulating controller temperature. - Fix hang on error before devm_memremap_pages() - Fix a bug that causes user memory corruption when data returned to user for ars_status. - Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax" * tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: fix ars_status output length calculation device-dax: avoid hang on error before devm_memremap_pages() tools/testing/nvdimm: improve emulation of smart injection filesystem-dax: Do not request kaddr and pfn when not required md/dm-writecache: Don't request pointer dummy_addr when not required dax/super: Do not request a pointer kaddr when not required tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access() s390, dcssblk: kaddr and pfn can be NULL to ->direct_access() libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access() acpi/nfit: queue issuing of ars when an uc error notification comes in libnvdimm: Export max available extent libnvdimm: Use max contiguous area for namespace size MAINTAINERS: Add Jan Kara for filesystem DAX MAINTAINERS: update Ross Zwisler's email address tools/testing/nvdimm: Fix support for emulating controller temperature tools/testing/nvdimm: Make DSM failure code injection an override acpi, nfit: Prefer _DSM over _LSR for namespace label reads libnvdimm: Introduce locked DIMM capacity support
2018-08-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds6-15/+23
Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request from me: - Host large page support for KVM guests. As the patches have large impact on arch/s390/mm/ this series goes out via both the KVM and the s390 tree. - Add an option for no compression to the "Kernel compression mode" menu, this will come in handy with the rework of the early boot code. - A large rework of the early boot code that will make life easier for KASAN and KASLR. With the rework the bootable uncompressed image is not generated anymore, only the bzImage is available. For debuggung purposes the new "no compression" option is used. - Re-enable the gcc plugins as the issue with the latent entropy plugin is solved with the early boot code rework. - More spectre relates changes: + Detect the etoken facility and remove expolines automatically. + Add expolines to a few more indirect branches. - A rewrite of the common I/O layer trace points to make them consumable by 'perf stat'. - Add support for format-3 PCI function measurement blocks. - Changes for the zcrypt driver: + Add attributes to indicate the load of cards and queues. + Restructure some code for the upcoming AP device support in KVM. - Build flags improvements in various Makefiles. - A few fixes for the kdump support. - A couple of patches for gcc 8 compile warning cleanup. - Cleanup s390 specific proc handlers. - Add s390 support to the restartable sequence self tests. - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup. - Lots of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits) s390/dasd: fix hanging offline processing due to canceled worker s390/dasd: fix panic for failed online processing s390/mm: fix addressing exception after suspend/resume rseq/selftests: add s390 support s390: fix br_r1_trampoline for machines without exrl s390/lib: use expoline for all bcr instructions s390/numa: move initial setup of node_to_cpumask_map s390/kdump: Fix elfcorehdr size calculation s390/cpum_sf: save TOD clock base in SDBs for time conversion KVM: s390: Add huge page enablement control s390/mm: Add huge page gmap linking support s390/mm: hugetlb pages within a gmap can not be freed KVM: s390: Add skey emulation fault handling s390/mm: Add huge pmd storage key handling s390/mm: Clear skeys for newly mapped huge guest pmds s390/mm: Clear huge page storage keys on enable_skey s390/mm: Add huge page dirty sync support s390/mm: Add gmap pmd invalidation and clearing s390/mm: Add gmap pmd notification bit setting s390/mm: Add gmap pmd linking ...
2018-08-09s390/dasd: fix hanging offline processing due to canceled workerStefan Haberland1-2/+5
During offline processing two worker threads are canceled without freeing the device reference which leads to a hanging offline process. Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-09s390/dasd: fix panic for failed online processingStefan Haberland1-0/+3
Fix a panic that occurs for a device that got an error in dasd_eckd_check_characteristics() during online processing. For example the read configuration data command may have failed. If this error occurs the device is not being set online and the earlier invoked steps during online processing are rolled back. Therefore dasd_eckd_uncheck_device() is called which needs a valid private structure. But this pointer is not valid if dasd_eckd_check_characteristics() has failed. Check for a valid device->private pointer to prevent a panic. Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-30s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()Huaisheng Ye1-3/+5
dcssblk_direct_access() needs to check the validity of pointers kaddr and pfn for NULL assignment. If anyone equals to NULL, it doesn't need to calculate the value. If either of them is equal to NULL, that is to say callers may have no need for kaddr or pfn, so this patch is prepared for allowing them to pass in NULL instead of having to pass in a pointer or local variable that they then just throw away. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Dave Jiang <dave.jianig@intel.com>
2018-07-19s390/dasd: replace PTR_RET with PTR_ERR_OR_ZEROGustavo A. R. Silva1-1/+1
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390/dasd: fix cast-function-type warningsSebastian Ott1-8/+8
Change the tasklets parameter type to fix W=1 warnings when building with gcc 8 like below: drivers/s390/block/dasd.c: In function 'dasd_alloc_device': drivers/s390/block/dasd.c:129:8: warning: cast between incompatible function types from 'void (*)(struct dasd_device *)' to 'void (*)(long unsigned int)' [-Wcast-function-type] (void (*)(unsigned long)) dasd_device_tasklet, ^ Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Acked-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/dasd: fix gcc 8 stringop-truncation warningVasily Gorbik1-1/+1
drivers/s390/block/dasd_alias.c:711:2: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation] strncpy((char *) &cqr->magic, "ECKD", 4); Replace strncpy to int as a buffer with memcpy. Acked-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/dasd,zfcp: fix gcc 8 stringop-truncation warningsVasily Gorbik2-3/+3
ccw "busid" should always be NUL-terminated, as evident from e.g. get_ccwdev_by_busid doing "return (strcmp(bus_id, dev_name(dev)) == 0)". Replace all strncpy initializing busid with strlcpy. This fixes the following gcc 8 warnings: drivers/s390/scsi/zfcp_aux.c:104:2: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(busid, token, ZFCP_BUS_ID_SIZE); drivers/s390/block/dasd_eer.c:316:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_eer.c:359:2: warning: 'strncpy' specified bound 10 equals destination size [-Wstringop-truncation] strncpy(header.busid, dev_name(&device->cdev->dev), DASD_EER_BUSID_SIZE); drivers/s390/block/dasd_devmap.c:429:3: warning: 'strncpy' specified bound 20 equals destination size [-Wstringop-truncation] strncpy(new->bus_id, bus_id, DASD_BUS_ID_SIZE); Acked-by: Stefan Haberland <sth@linux.ibm.com> Acked-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/scm_blk: correct numa_node in scm_blk_dev_setupVasily Gorbik1-0/+1
The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/dasd: correct numa_node in dasd_alloc_queueVasily Gorbik1-0/+1
The numa_node field of the tag_set struct has to be explicitly initialized, otherwise it stays as 0, which is a valid numa node id and cause memory allocation failure if node 0 is offline. Acked-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/dasd: reduce the default queue depth and nr of hardware queuesStefan Haberland2-10/+11
Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-19Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds7-168/+100
Pull s390 updates from Martin Schwidefsky: "common I/O layer - Fix bit-fields crossing storage-unit boundaries in css_general_char dasd driver - Avoid a sparse warning in regard to the queue lock - Allocate the struct dasd_ccw_req as per request data. Only for internal I/O is the structure allocated separately - Remove the unused function dasd_kmalloc_set_cda - Save a few bytes in struct dasd_ccw_req by reordering fields - Convert remaining users of dasd_kmalloc_request to dasd_smalloc_request and remove the now unused function vfio/ccw - Refactor and improve pfn_array_alloc_pin/pfn_array_pin - Add a new tracepoint for failed vfio/ccw requests - Add a CCW translation improvement to accept more requests as valid - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: only use preallocated requests s390/dasd: reshuffle struct dasd_ccw_req s390/dasd: remove dasd_kmalloc_set_cda s390/dasd: move dasd_ccw_req to per request data s390/dasd: simplify locking in process_final_queue s390/cio: sanitize css_general_characteristics definition vfio: ccw: add tracepoints for interesting error paths vfio: ccw: set ccw->cda to NULL defensively vfio: ccw: refactor and improve pfn_array_alloc_pin() vfio: ccw: shorten kernel doc description for pfn_array_pin() vfio: ccw: push down unsupported IDA check vfio: ccw: fix error return in vfio_ccw_sch_event s390/archrandom: Rework arch random implementation. s390/net: add pnetid support
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-3/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12s390/dasd: only use preallocated requestsSebastian Ott4-77/+8
Change the remaining users of dasd_kmalloc_request to use preallocated memory and remove this function. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: reshuffle struct dasd_ccw_reqSebastian Ott1-11/+3
Move some members of struct dasd_ccw_req to get rid of padding bytes. This saves 16 bytes per dasd request. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: remove dasd_kmalloc_set_cdaSebastian Ott1-6/+0
There is no user of this function. Just remove it. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: move dasd_ccw_req to per request dataSebastian Ott5-47/+57
Let the block layer allocate per request data to store struct dasd_ccw_req. We still need extra preallocated memory for usage by ccw programs (which vary in length) and for requests which don't originate from the block layer. Link: https://lkml.kernel.org/r/20180530074130.GA6927@infradead.org Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: simplify locking in process_final_queueSebastian Ott1-27/+32
Simplify locking in __dasd_device_process_final_queue to fix the following sparse warning: drivers/s390/block/dasd.c:1902:9: warning: context imbalance in '__dasd_device_process_final_queue' - different lock contexts for basic block Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-08Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-0/+7
Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.