aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/char (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-01-11s390/smp: fix CPU hotplug deadlock with CPU rescanGerald Schaefer1-0/+2
smp_rescan_cpus() is called without the device_hotplug_lock, which can lead to a dedlock when a new CPU is found and immediately set online by a udev rule. This was observed on an older kernel version, where the cpu_hotplug_begin() loop was still present, and it resulted in hanging chcpu and systemd-udev processes. This specific deadlock will not show on current kernels. However, there may be other possible deadlocks, and since smp_rescan_cpus() can still trigger a CPU hotplug operation, the device_hotplug_lock should be held. For reference, this was the deadlock with the old cpu_hotplug_begin() loop: chcpu (rescan) systemd-udevd echo 1 > /sys/../rescan -> smp_rescan_cpus() -> (*) get_online_cpus() (increases refcount) -> smp_add_present_cpu() (new CPU found) -> register_cpu() -> device_add() -> udev "add" event triggered -----------> udev rule sets CPU online -> echo 1 > /sys/.../online -> lock_device_hotplug_sysfs() (this is missing in rescan path) -> device_online() -> (**) device_lock(new CPU dev) -> cpu_up() -> cpu_hotplug_begin() (loops until refcount == 0) -> deadlock with (*) -> bus_probe_device() -> device_attach() -> device_lock(new CPU dev) -> deadlock with (**) Fix this by taking the device_hotplug_lock in the CPU rescan path. Cc: <stable@vger.kernel.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-12-13s390/drivers: fix proc/debugfs file permissionsSebastian Ott1-5/+2
Remove write permissions for fops without a write callback. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport2-2/+2
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-09s390/kasan: avoid instrumentation of early C codeVasily Gorbik1-0/+1
Instrumented C code cannot run without the kasan shadow area. Exempt source code files from kasan which are running before / used during kasan initialization. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/sclp: introduce sclp_early_get_hsa_sizeVasily Gorbik1-0/+11
Introduce sclp_early_get_hsa_size function to be used during early memory detection. This function allows to find a memory limit imposed during zfcpdump. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mem_detect: replace tprot loop with binary searchVasily Gorbik1-2/+1
In a situation when other memory detection methods are not available (no SCLP and no z/VM diag260), continuous online memory is assumed. Replacing tprot loop with faster binary search, as only online memory end has to be found. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mem_detect: introduce SCLP storage infoVasily Gorbik3-10/+64
SCLP storage info allows to detect continuous and non-continuous online memory under LPAR, z/VM and KVM, when standby memory is defined. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mem_detect: move tprot loop to early boot phaseVasily Gorbik1-0/+17
Move memory detection to early boot phase. To store online memory regions "struct mem_detect_info" has been introduced together with for_each_mem_detect_block iterator. mem_detect_info is later converted to memblock. Also introduces sclp_early_get_meminfo function to get maximum physical memory and maximum increment number. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/sclp: move sclp_early_read_info to sclp_early_core.cVasily Gorbik3-64/+79
To enable early online memory detection sclp_early_read_info has been moved to sclp_early_core.c. sclp_info_sccb has been made a part of .boot.data, which allows to reuse it later during early kernel startup and make sclp_early_read_info call just once. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/sclp: simplify early hsa_size detectionVasily Gorbik1-57/+3
Architecture documentation suggests that hsa_size has been available in the read info since the list-directed ipl dump has been introduced. By using this value few early sclp calls could be avoided. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/monwriter: do not use stack buffers for hardware dataMartin Schwidefsky1-13/+20
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data structures passed to a hardware or a hypervisor interface that requires V=R can not be allocated on the stack anymore. Use kmalloc to get memory for the appldata_parameter_list and appldata_product_id structures. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/appldata: pass parameter list pointer to appldata_asmMartin Schwidefsky1-1/+3
In preparation for CONFIG_VMAP_STACK=y move the allocation of the struct appldata_parameter_list to the caller of appldata_asm(). Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20s390/tape: fix spelling mistake "partion" -> "partition"Colin Ian King1-1/+1
Trivial fix to spelling mistake in message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20s390: vmlogrdr: Use ARRAY_SIZE instead of reimplementing its functionzhong jiang1-1/+1
Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20s390/sclp: Allow to request adapter resetJan Höppner1-2/+8
The SCLP event 24 "Adapter Error Notification" supports three different action qualifier of which 'adapter reset' is currently not enabled in the sysfs interface. However, userspace tools might want to be able to use the reset functionality as well. Enable the 'adapter reset' qualifier. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-20s390/hibernate: fix error handling when suspend cpu != resume cpuGerald Schaefer1-3/+8
The resume code checks if the resume cpu is the same as the suspend cpu. If not, and if it is also not possible to switch to the suspend cpu, an error message should be printed and the resume process should be stopped by loading a disabled wait psw. The current logic is broken in multiple ways, the message is never printed, and the disabled wait psw never loaded because the kernel panics before that: - sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break on the first 64bit instruction in sclp_early_printk(). - The init stack should be used, but the stack pointer is not set up correctly (missing aghi %r15,-STACK_FRAME_OVERHEAD). - __sclp_early_printk() checks the sclp_init_state. If it is not sclp_init_state_uninitialized, it simply returns w/o printing anything. In the resumed kernel however, sclp_init_state will never be uninitialized. This patch fixes those issues by removing the sam31/ESA logic, adding a correct init stack pointer, and also introducing sclp_early_printk_force() to allow using sclp_early_printk() even when sclp_init_state is not uninitialized. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-18Merge tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-2/+28
Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver pull request for 4.19-rc1. It's not all that big, just a number of small serial driver updates and fixes, along with some better vt handling for unicode characters for those using braille terminals. All of these patches have been in linux-next for a long time with no reported issues" * tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits) tty: serial: 8250: Revert NXP SC16C2552 workaround serial: 8250_exar: Read INT0 from slave device, too tty: rocket: Fix possible buffer overwrite on register_PCI serial: 8250_dw: Add ACPI support for uart on Broadcom SoC serial: 8250_dw: always set baud rate in dw8250_set_termios dt-bindings: serial: Add binding for uartlite tty: serial: uartlite: Add support for suspend and resume tty: serial: uartlite: Add clock adaptation tty: serial: uartlite: Add structure for private data serial: sh-sci: Improve support for separate TEI and DRI interrupts serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE serial: sh-sci: Allow for compressed SCIF address serial: sh-sci: Improve interrupts description serial: 8250: Use cached port name directly in messages serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup() vt: drop unused struct vt_struct vt: avoid a VLA in the unicode screen scroll function vt: add /dev/vcsu* to devices.txt vt: coherence validation code for the unicode screen buffer vt: selection: take screen contents from uniscr if available ...
2018-08-17mm/cma: remove unsupported gfp_mask parameter from cma_alloc()Marek Szyprowski1-1/+1
cma_alloc() doesn't really support gfp flags other than __GFP_NOWARN, so convert gfp_mask parameter to boolean no_warn parameter. This will help to avoid giving false feeling that this function supports standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer, what has already been an issue: see commit dd65a941f6ba ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag"). Link: http://lkml.kernel.org/r/20180709122019eucas1p2340da484acfcc932537e6014f4fd2c29~-sqTPJKij2939229392eucas1p2j@eucas1p2.samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Michał Nazarewicz <mina86@mina86.com> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-19s390/tape: replace PTR_RET with PTR_ERR_OR_ZEROGustavo A. R. Silva1-1/+1
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-19s390/keyboard: sanitize array index in do_kdsk_ioctlMartin Schwidefsky1-12/+16
The kbd_ioctl uses two user controlled indexes for KDGKBENT/KDSKBENT. Use array_index_nospec to prevent any out of bounds speculation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-07kbd: complete dead keys definitionsSamuel Thibault1-2/+28
This completes dead keys definitions for internationalization completeness on the console. The representatives have been chosen coherently with libx11 compose sequences, which avoid symetry conflicts (e.g. there is U with caron, but no c with breve). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06s390/sclp_async: replace callhome proc handler with generic oneVasily Gorbik1-31/+7
Reuse generic proc_dointvec_minmax proc handler instead of proc_handler_callhome. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/monwriter: fix gcc 8 stringop-truncation warningVasily Gorbik1-1/+1
The following gcc warning is issued for strncpy which is used to deliberately avoid string NUL-termination. Reuse memcpy to avoid the warning. inlined from 'monwrite_diag' at drivers/s390/char/monwriter.c:64:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/tape: fix gcc 8 stringop-truncation warningVasily Gorbik1-4/+4
Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'ext_to_int_kekl' at drivers/s390/char/tape_3590.c:123:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation] Also replaces "for" loop on memset. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/tape: fix stringop-truncation gcc 8 warningsVasily Gorbik1-2/+2
Use strlcpy to make sure strings are NUL-terminated. Fixes the following gcc 8 warning: inlined from 'register_tape_dev' at drivers/s390/char/tape_class.c:57:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25s390/decompressor: avoid reusing uncompressed image objectsVasily Gorbik1-5/+0
Re-compile ebcdic.c and sclp_early_core.c for the decompressor, using proper decompressor CFLAGS. This also allows to potentially use instrumentation for those files when built for the main kernel image. With kbuild there is no easy way to re-compile a source file from another directory. Bypass ugly rules and Makefile meta-programming with relative path includes of original files. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-1/+1
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook3-3/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-0/+3
Pull s390 updates from Martin Schwidefsky: - A rework for the s390 arch random code, the TRNG instruction is rather slow and should not be used on the interrupt path - A fix for a memory leak in the zcrypt driver - Changes to the early boot code to add a compile time check for code that may not use the .bss section, with the goal to avoid initrd corruptions - Add an interface to get the physical network ID (pnetid), this is useful to group network devices that are attached to the same network - Some cleanup for the linker script - Some code improvement for the dasd driver - Two fixes for the perf sampling support * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix CCA and EP11 CPRB processing failure memory leak. s390/archrandom: Rework arch random implementation. s390/net: add pnetid support s390/dasd: simplify locking in dasd_times_out s390/cio: add test for ccwgroup device s390/cio: add helper to query utility strings per given ccw device s390: remove no-op macro VMLINUX_SYMBOL() s390: remove closung punctuation from spectre messages s390: introduce compile time check for empty .bss section s390/early: move functions which may not access bss section to extra file s390/early: get rid of #ifdef CONFIG_BLK_DEV_INITRD s390/early: get rid of memmove_early s390/cpum_sf: Add data entry sizes to sampling trailer entry perf: fix invalid bit in diagnostic entry
2018-06-04Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-3/+0
Pull timers and timekeeping updates from Thomas Gleixner: - Core infrastucture work for Y2038 to address the COMPAT interfaces: + Add a new Y2038 safe __kernel_timespec and use it in the core code + Introduce config switches which allow to control the various compat mechanisms + Use the new config switch in the posix timer code to control the 32bit compat syscall implementation. - Prevent bogus selection of CPU local clocksources which causes an endless reselection loop - Remove the extra kthread in the clocksource code which has no value and just adds another level of indirection - The usual bunch of trivial updates, cleanups and fixlets all over the place - More SPDX conversions * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) clocksource/drivers/mxs_timer: Switch to SPDX identifier clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Remove outdated file path clocksource/drivers/arc_timer: Add comments about locking while read GFRC clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages clocksource/drivers/sprd: Fix Kconfig dependency clocksource: Move inline keyword to the beginning of function declarations timer_list: Remove unused function pointer typedef timers: Adjust a kernel-doc comment tick: Prefer a lower rating device only if it's CPU local device clocksource: Remove kthread time: Change nanosleep to safe __kernel_* types time: Change types to new y2038 safe __kernel_* types time: Fix get_timespec64() for y2038 safe compat interfaces time: Add new y2038 safe __kernel_timespec posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_64BIT_TIME in architectures compat: Enable compat_get/put_timespec64 always ...
2018-05-16proc: introduce proc_create_seq{,_data}Christoph Hellwig1-17/+2
Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-09s390: introduce compile time check for empty .bss sectionVasily Gorbik1-0/+3
Introduce compile time check for files which should avoid using .bss section, because of the following reasons: - .bss section has not been zeroed yet, - initrd has not been moved to a safe location and could be overlapping with .bss section. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-02Merge branch 'timers/urgent' into timers/coreThomas Gleixner1-1/+1
Pick up urgent fixes to apply dependent cleanup patch
2018-04-19compat: Move compat_timespec/ timeval to compat_time.hDeepa Dinamani3-3/+0
All the current architecture specific defines for these are the same. Refactor these common defines to a common header file. The new common linux/compat_time.h is also useful as it will eventually be used to hold all the defines that are needed for compat time types that support non y2038 safe types. New architectures need not have to define these new types as they will only use new y2038 safe syscalls. This file can be deleted after y2038 when we stop supporting non y2038 safe syscalls. The patch also requires an operation similar to: git grep "asm/compat\.h" | cut -d ":" -f 1 | xargs -n 1 sed -i -e "s%asm/compat.h%linux/compat.h%g" Cc: acme@kernel.org Cc: benh@kernel.crashing.org Cc: borntraeger@de.ibm.com Cc: catalin.marinas@arm.com Cc: cmetcalf@mellanox.com Cc: cohuck@redhat.com Cc: davem@davemloft.net Cc: deller@gmx.de Cc: devel@driverdev.osuosl.org Cc: gerald.schaefer@de.ibm.com Cc: gregkh@linuxfoundation.org Cc: heiko.carstens@de.ibm.com Cc: hoeppner@linux.vnet.ibm.com Cc: hpa@zytor.com Cc: jejb@parisc-linux.org Cc: jwi@linux.vnet.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: mark.rutland@arm.com Cc: mingo@redhat.com Cc: mpe@ellerman.id.au Cc: oberpar@linux.vnet.ibm.com Cc: oprofile-list@lists.sf.net Cc: paulus@samba.org Cc: peterz@infradead.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: rric@kernel.org Cc: schwidefsky@de.ibm.com Cc: sebott@linux.vnet.ibm.com Cc: sparclinux@vger.kernel.org Cc: sth@linux.vnet.ibm.com Cc: ubraun@linux.vnet.ibm.com Cc: will.deacon@arm.com Cc: x86@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: James Hogan <jhogan@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-04-16s390/sclp: avoid potential usage of uninitialized valueVasily Gorbik1-1/+1
sclp_early_printk could be used before .bss section is zeroed (i.e. from als.c during the decompressor phase), therefore values used by sclp_early_printk should be located in the .data section. Another reason for that is to avoid potential initrd corruption, if some code in future would use sclp_early_printk before initrd is moved from possibly overlapping with .bss section region to a safe location. Fixes: 0b0d1173d8ae ("s390/sclp: 32 bit event mask compatibility mode") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-18s390/defkeymap: fix global init to zeroChristian Borntraeger1-1/+1
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-18s390/sclp_tty: enable line mode tty even if there is an ascii consoleChristian Borntraeger1-1/+4
commit 8f50af49f564d4e5 ("s390/console: Make preferred console handling more consistent") created a separate console state for the ascii console. This has the side effect that we register no tty for the line mode interface as soon as there an ascii interface as default console. Under KVM this results in no getty program on the line mode tty if the guest has both types of interfaces. As we can have multiple ttys at the same time we do not want to disable the tty on sclp_line0 under KVM. So instead of checking for the console mode, we now check for the presence of the sclp line mode interface. As z/VM multiplexes the line mode interface on the 32xx screen we continue to disable the line mode tty for the z/VM case. CC: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Fixes: 8f50af49f564d4e5 ("s390/console: Make preferred console handling more consistent") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-18s390/char : Rename EBCDIC keymap variablesFarhan Ali3-48/+61
The Linux Virtual Terminal (VT) layer provides a default keymap which is compiled when VT layer is enabled. But at the same time we are also compiling the EBCDIC keymap and this causes the linker to complain. So let's rename the EBCDIC keymap variables to prevent linker conflict. Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <f670a2698d2372e1e990c48a29334ffe894804b1.1519315352.git.alifm@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-22s390/sclp: 64 bit event maskClaudio Imbrenda1-1/+1
Change the size of the sclp mask to 64 bits. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-22s390/sclp: 32 bit event mask compatibility modeClaudio Imbrenda3-8/+33
Qemu before version 2.11 does not implement the architecture correctly, and does not allow for a mask size of size different than 4. This patch introduces a compatibility mode for such systems, forcing the mask sizes to 4. Since the mask size is currently still 4 anyway, this patch should have no impact whatsoever by itself, but it will be needed when the mask size is increased to 64 bits in the next patch. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-22s390/sclp: generic event mask accessorsClaudio Imbrenda4-23/+75
Switch the layout of the event masks to be a generic buffer, and implement accessors to retrieve the values of the masks. This will be needed in the next patches, where we will eventually switch the mask size to 64 bits. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-22s390/sclp: clean up, use sccb_mask_t where appropriateClaudio Imbrenda3-8/+8
Replace hardcoded instances where 32 or unsigned int (or long) is used for SCLP event masks, and replace with sizeof(sccb_mask_t) and sccb_mask_t respectively. This improves readability and prepares for when we will increase sccb_mask_t to 64 bits. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-22s390/sclp: Add support for Store Data SCLP interfacePeter Oberparleiter3-1/+572
Add functions to retrieve data associated with an SCLP Store Data entity. Automatically retrieve data for the "config" entity during boot and make that data available to user-space via sysfs: /sys/firmware/sclp_sd/config/data Reading from this file will return config data contents. /sys/firmware/sclp_sd/config/reload Writing to this file will cause the latest version of data related to the config entity to be read from the SCLP interface. Generate a KOBJ_CHANGE whenever new data is retrieved. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+2
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-07s390: introduce execute-trampolines for branchesMartin Schwidefsky1-0/+2
Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and -mfunction_return= compiler options to create a kernel fortified against the specte v2 attack. With CONFIG_EXPOLINE=y all indirect branches will be issued with an execute type instruction. For z10 or newer the EXRL instruction will be used, for older machines the EX instruction. The typical indirect call basr %r14,%r1 is replaced with a PC relative call to a new thunk brasl %r14,__s390x_indirect_jump_r1 The thunk contains the EXRL/EX instruction to the indirect branch __s390x_indirect_jump_r1: exrl 0,0f j . 0: br %r1 The detour via the execute type instruction has a performance impact. To get rid of the detour the new kernel parameter "nospectre_v2" and "spectre_v2=[on,off,auto]" can be used. If the parameter is specified the kernel and module code will be patched at runtime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-01Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-2/+2
Pull s390 updates from Martin Schwidefsky: "Bug fixes, small improvements and one notable change: the system call table and the unistd.h header are now generated automatically with a shell script from a text file" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/decompressor: discard __ksymtab and .eh_frame sections s390: fix handling of -1 in set{,fs}[gu]id16 syscalls s390/tools: generate header files in arch/s390/include/generated/ s390/syscalls: use generated syscall_table.h and unistd.h header files s390/syscalls: add Makefile to generate system call header files s390/syscalls: add syscalltbl script s390/syscalls: add system call table s390/decompressor: swap .text and .rodata.compressed sections s390/sclp: fix .data section specification s390/ipl: avoid usage of __section(.data) s390/head: replace hard coded values with constants s390/disassembler: add generated gen_opcode_table tool to .gitignore s390: remove bogus system call table entries s390/kprobes: remove duplicate includes s390/dasd: Remove dead return code checks s390/dasd: Simplify code s390/vdso: revise CFI annotations of vDSO functions s390/kernel: emit CFI data in .debug_frame and discard .eh_frame sections
2018-02-01Merge branch 'x86/hyperv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipRadim Krčmář1-0/+2
Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-30Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.