aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/char (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley1-7/+5
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_SUSPENDED bit and update atomicallyPeter Hurley1-6/+6
Replace ASYNC_SUSPENDED bit in the tty_port::flags field with TTY_PORT_SUSPENDED bit in the tty_port::iflags field. Introduce helpers tty_port_set_suspended() and tty_port_suspended() to abstract atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_IO_ERROR bit tests with tty_io_error()Peter Hurley1-2/+2
Abstract TTY_IO_ERROR status test treewide with tty_io_error(). NB: tty->flags uses atomic bit ops; replace non-atomic bit test with test_bit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27s390/sclp_ctl: fix potential information leak with /dev/sclpMartin Schwidefsky1-5/+7
The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to retrieve the sclp request from user space. The first copy_from_user fetches the length of the request which is stored in the first two bytes of the request. The second copy_from_user gets the complete sclp request, but this copies the length field a second time. A malicious user may have changed the length in the meantime. Reported-by: Pengfei Wang <wpengfeinudt@gmail.com> Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-21s390/sclp: avoid compile warning in sclp_pci_reportMartin Schwidefsky1-1/+2
Fix the initialization of a local variable to remove this warning: All warnings (new ones prefixed by >>): drivers/s390/char/sclp_pci.c: In function 'sclp_pci_report': >> drivers/s390/char/sclp_pci.c:127:9: warning: missing braces around initializer [-Wmissing-braces] struct sclp_req req = {0}; ^ drivers/s390/char/sclp_pci.c:127:9: warning: (near initialization for 'req.list') [-Wmissing-braces] Fixes: 12283a4035691697 "s390/sclp: add error notification command" Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-15s390/sclp: event type macro cleanupSebastian Ott2-20/+20
Sort the sclp event type defines and use a macro to create the corresponding event type masks. In addition to that one unused type/mask pair is removed and another previously unused define is used now (it was probably unused/unknown because it didn't follow the EVTYP_X EVTYP_X_MASK convention). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-15s390/sclp: add error notification commandSebastian Ott2-2/+120
Add SCLP event 24 "Adapter-error notification". Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-15s390/sclp: move pci related commands to separate fileSebastian Ott3-61/+78
sclp commands only used by the PCI code shouldn't be build for !CONFIG_PCI. Instead of adding more ifdefs to sclp_cmd.c just move them to a new file. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-17Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-2/+1
Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
2016-03-07s390: Use pr_warn instead of pr_warningJoe Perches5-30/+23
Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-28tty: Remove ASYNC_CLOSINGPeter Hurley1-2/+1
The tty core no longer provides nor uses ASYNC_CLOSING; remove from tty_port_close_start() and tty_port_close_end() as well as tty drivers which open-code these state changes. Unfortunately, even though the bit is masked from userspace, its inclusion in a uapi header precludes removing the macro. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: linux-cris-kernel@axis.com Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds9-466/+167
Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
2016-01-12Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-34/+5
Pull misc vfs updates from Al Viro: "All kinds of stuff. That probably should've been 5 or 6 separate branches, but by the time I'd realized how large and mixed that bag had become it had been too close to -final to play with rebasing. Some fs/namei.c cleanups there, memdup_user_nul() introduction and switching open-coded instances, burying long-dead code, whack-a-mole of various kinds, several new helpers for ->llseek(), assorted cleanups and fixes from various people, etc. One piece probably deserves special mention - Neil's lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets called without ->i_mutex and tries to avoid ever taking it. That, of course, means that it's not useful for any directory modifications, but things like getting inode attributes in nfds readdirplus are fine with that. I really should've asked for moratorium on lookup-related changes this cycle, but since I hadn't done that early enough... I *am* asking for that for the coming cycle, though - I'm going to try and get conversion of i_mutex to rwsem with ->lookup() done under lock taken shared. There will be a patch closer to the end of the window, along the lines of the one Linus had posted last May - mechanical conversion of ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/ inode_is_locked()/inode_lock_nested(). To quote Linus back then: ----- | This is an automated patch using | | sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/' | sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/' | sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/' | sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/' | sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/' | | with a very few manual fixups ----- I'm going to send that once the ->i_mutex-affecting stuff in -next gets mostly merged (or when Linus says he's about to stop taking merges)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) nfsd: don't hold i_mutex over userspace upcalls fs:affs:Replace time_t with time64_t fs/9p: use fscache mutex rather than spinlock proc: add a reschedule point in proc_readfd_common() logfs: constify logfs_block_ops structures fcntl: allow to set O_DIRECT flag on pipe fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE fs: xattr: Use kvfree() [s390] page_to_phys() always returns a multiple of PAGE_SIZE nbd: use ->compat_ioctl() fs: use block_device name vsprintf helper lib/vsprintf: add %*pg format specifier fs: use gendisk->disk_name where possible poll: plug an unused argument to do_poll amdkfd: don't open-code memdup_user() cdrom: don't open-code memdup_user() rsxx: don't open-code memdup_user() mtip32xx: don't open-code memdup_user() [um] mconsole: don't open-code memdup_user_nul() [um] hostaudio: don't open-code memdup_user() ...
2016-01-11s390/sclp: fix possible control register corruptionHeiko Carstens1-3/+2
sclp_sync_wait() disables all external interrupt classes except for the service signal subclass. The static mask used for that however is wrong. It clears a couple of bits which shouldn't be cleared and on the other hand potentially does not clear bits which should be cleared. Fix this by using the same generic mask like we do it in our delay implementation. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro1-8/+3
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-30s390/con3270: testing return kzalloc retvalPierre Morel1-0/+2
Return value from kzalloc is not tested and using a null pointer would lead to crash. Even if this should not happen at this moment, we may let the system decide if there is a better choice. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-30s390/hmcdrv: constify hmcdrv_ftp_ops structsAya Mahfouz1-3/+3
Constifies hmcdrv_ftp_ops structures in s390's char driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-30s390/cio: add NULL testJulia Lawall1-0/+2
Add NULL test on call to kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; identifier fld; @@ * x = kzalloc(...); ... when != x == NULL x->fld // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-23new helpers: no_seek_end_llseek{,_size}()Al Viro2-26/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-15KVM: s390: consider system MHA for guest storageGuenther Hutzl1-1/+7
Verify that the guest maximum storage address is below the MHA (maximum host address) value allowed on the host. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> [adopt to match recent limit,size changes] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-30s390/sclp: introduce check for SIEDavid Hildenbrand1-0/+1
This patch adds a way to check if the SIE with zArchitecture support is available. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-30s390/sclp: introduce checks for ESCA and HVSEugene (jno) Dvurechenski1-1/+6
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check whether the extended-SCA and the home-virtual-SCA facilities are available. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-27s390/sclp: add open for business supportJochen Schweflinghaus2-1/+109
Provide a user space interface and an enhancement to the sclp device driver which allows to send an 'Open for Business' event from the operating system to the Support Element. The 'Open for Business' event is used to signal the Support Element that the operating system (or an application running on top of it) is up and running. Signed-off-by: Jochen Schweflinghaus <schwefel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/sclp_cpi: remove sclp_cpi module in favor of sysfs interfaceHendrik Brueckner3-54/+0
Since commit c05ffc4f2b20 ("[S390] sclp: sysfs interface for SCLP cpi"), which was made 2008 the user can specify a system and sysplex name through the /sys/firmware/cpi interface. In addition to sysplex and system name, the user can also override the system type and system version. Because the syfs interface is easier to use and allows the settings to be updated, the sclp_cpi module becomes obsolete and can be removed. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: cleanup CPU save area handlingMartin Schwidefsky1-6/+5
Introduce save_area_alloc(), save_area_boot_cpu(), save_area_add_regs() and save_area_add_vxrs to deal with storing the CPU state in case of a system dump. Remove struct save_area and save_area_ext, and create a new struct save_area as a local definition to arch/s390/kernel/crash_dump.c. Copy each individual field from the hardware status area to the save area, storing the minimum of required data. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: rework CPU register dump codeMartin Schwidefsky1-2/+0
To collect the CPU registers of the crashed system allocated a single page with memblock_alloc_base and use it as a copy buffer. Replace the stop-and-store-status sigp with a store-status-at-address sigp in smp_save_dump_cpus() and smp_store_status(). In both cases the target CPU is already stopped and store-status-at-address avoids the detour via the absolute zero page. For kexec simplify s390_reset_system and call store_status() before the prefix register of the boot CPU has been set to zero. Use STPX to store the prefix register and remove dump_prefix_page. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: remove SAVE_AREA_BASEMartin Schwidefsky1-1/+1
Replace the SAVE_AREA_BASE offset calculations in reipl.S with the assembler constant for the location of each register status area. Use __LC_FPREGS_SAVE_AREA instead of SAVE_AREA_BASE in the three remaining code locations and remove the definition of SAVE_AREA_BASE. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/zcore: simplify memcpy_hsaMartin Schwidefsky1-68/+33
Replace the three part copy logic int memcpy_hsa with a single loop around sclp_sdias_copy with appropriate offset and size calculations, and inline memcpy_hsa into memcpy_hsa_user and memcpy_hsa_kernel. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: streamline oldmem copy functionsMartin Schwidefsky1-3/+17
Introduce two copy functions for the memory of the dumped system, copy_oldmem_kernel() to copy to the virtual kernel address space and copy_oldmem_user() to copy to user space. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/zcore: remove /sys/kernel/debug/zcore/memMartin Schwidefsky2-389/+9
New versions of the SCSI dumper use the /dev/vmcore interface instead of zcore mem. Remove the outdated interface. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/zcore: copy vector registers into the image dataMartin Schwidefsky1-16/+54
The /sys/kernel/debug/zcore/mem interface delivers the memory of the old system with the CPU registers stored to the assigned locations in each prefix page. For the vector registers the prefix page of each CPU has an address of a 1024 byte save area at 0x11b0. But the /sys/kernel/debug/zcore/mem interface fails copy the vector registers saved at boot of the zfcpdump kernel into the dump image. Copy the saved vector registers of a CPU to the outout buffer if the memory area that is read via /sys/kernel/debug/zcore/mem intersects with the vector register save area of this CPU. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/zcore: remove invalid kfree in init_cpu_infoMartin Schwidefsky1-1/+0
The extended save area for the boot CPU has been allocated by smp_save_dump_cpus() with memblock_alloc() and may not be freed with kfree(). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds4-83/+80
Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
2015-10-14s390/sclp: avoid merged message outputMartin Schwidefsky3-83/+78
The sclp console and tty code currently uses several message text objects in a single message event to print several lines with one SCCB. This causes the output of these lines to be fused into a block which is noticeable when selecting text in the operating system message panel. Instead use several message events with a single message text object each to print every line on its own. This changes the SCCB layout from struct sccb_header struct evbuf_header struct mdb_header struct go struct mto ... struct mto to struct sccb_header struct evbuf_header struct mdb_header struct go struct mto ... struct evbuf_header struct mdb_header struct go struct mto Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/diag: add a statistic for diagnose callsMartin Schwidefsky1-0/+2
Introduce /sys/debug/kernel/diag_stat with a statistic how many diagnose calls have been done by each CPU in the system. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-21s390/iucv: do not use arrays as argumentUrsula Braun2-6/+6
The iucv code uses arrays as arguments. Even though this does not really cause a problem, it could be misleading, since the compiler turns array arguments into just a pointer argument. To be more precise this patch changes the array arguments into pointers. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26s390/sclp_vt220: support magic sysrequestsHendrik Brueckner1-1/+51
Implement magic sysrequest handling for the VT220 terminal (also known as the Integrated ASCII console on the HMC/SE). To invoke a "magic sysrequest" function, press "Ctrl+o" followed by a second character that designates the debugging function. The handling of the sysrq is scheduled away from the SCLP IRQ context; because large amounts of sysrq output might fill up the console buffers. The console might deadlock because it cannot empty the buffers while still in the receiving IRQ context. This behavior is the same as for the SCLP console. Reported-by: Horst Weber <hweber@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26s390/ctrlchar: improve handling of magic sysrequestsHendrik Brueckner2-5/+23
Extract the sysrq handling from the ctrlchar_handle() into a separate function that can be directly used by other users. Introduce a new sysrq_work structure to embed the work_struct and to specify the magic sysrq function to be invoked. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-26s390/3270: redraw screen on unsolicited device endMartin Schwidefsky2-0/+8
If a 3270 terminal is disconnected and later reconnected again, it gets an unsolicited device end. This is currently ignored and you have to hit the clear key to get the screen redrawn. Add an automatic full redraw of the screen for this case. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-19s390/hmcdrv: fix interrupt registrationHeiko Carstens1-2/+2
The z/VM driver sets bit "63-22" in control register zero to one in order to enable the CP Service interrupt (0x2603). However the irq subclass mask that normally corresponds to the CP Service interrupt is "63-54" (== "63-22-32"). So it looks like the author read the documentation with the 32 bit sized cr0 register bit positions (== 22), but didn't realize that bit numbers change, if applied to a 64 bit register (== 54) due to the numbering scheme. Also use irq_subclass_register() instead if ctl_set_bit() since multiple services depend on the service signal subclass mask, which is the correct bit. This also explains why nobody noticed the bug, since the bit is always enabled anyway (e.g. pfault). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-07s390: remove unneeded semicolonPeter Senna Tschudin1-1/+1
Remove unneeded semicolon. The semantic patch that detects this change is available at scripts/coccinelle/misc/semicolon.cocci. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-08-04s390/numa: add emulation supportMichael Holzheu1-7/+11
NUMA emulation (aka fake NUMA) distributes the available memory to nodes without using real topology information about the physical memory of the machine. Splitting the system memory into nodes replicates the memory management structures for each node. Particularly each node has its own "mm locks" and its own "kswapd" task. For large systems, under certain conditions, this results in improved system performance and/or latency based on reduced pressure on the mm locks and the kswapd tasks. NUMA emulation distributes CPUs to nodes while respecting the original machine topology information. This is done by trying to avoid to separate CPUs which reside on the same book or even on the same MC. Because the current Linux scheduler code requires a stable cpu to node mapping, cores are pinned to nodes when the first CPU thread is set online. This patch is based on the initial implementation from Philipp Hachtmann. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-22s390/sclp: Change SCLP console default buffer-full behaviorPeter Oberparleiter1-3/+3
Dropping kernel messages during a console-buffer-full condition is preferable to halting the system until console messages are delivered, especially for production systems. Update default for sclp_console_drop kernel parameter accordingly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-01s390/sclp: fix compile errorSebastian Ott1-0/+1
Fix this error when compiling with CONFIG_SMP=n and CONFIG_DYNAMIC_DEBUG=y: drivers/s390/char/sclp_early.c: In function 'sclp_read_info_early': drivers/s390/char/sclp_early.c:87:19: error: 'EBUSY' undeclared (first use in this function) } while (rc == -EBUSY); ^ Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25s390/kdump: fix nosmt kernel parameterMichael Holzheu1-1/+1
It turned out that SIGP set-multi-threading can only be done once. Therefore switching to a different MT level after switching to sclp.mtid_prev in the dump case fails. As a symptom specifying the "nosmt" parameter currently fails for the kdump kernel and the kernel starts with multi-threading enabled. So fix this and issue diag 308 subcode 1 call after collecting the CPU states for the dump. Also enhance the diag308_reset() function to be usable also with enabled lowcore protection and prefix register != 0. After the reset it is possible to switch the MT level again. We have to do the reset very early in order not to kill the already initialized console. Therefore instead of kmalloc() the corresponding memblock functions have to be used. To avoid copying the sclp cpu code into sclp_early, we now use the simple sigp loop method for CPU detection. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25s390/smp: cleanup core vs. cpu in the SCLP interfaceMartin Schwidefsky2-17/+16
The SCLP interface to query, configure and deconfigure CPUs actually operates on cores. For a machine without the multi-threading faciltiy a CPU and a core are equivalent but starting with System z13 a core can have multiple hardware threads, also referred to as logical CPUs. To avoid confusion replace the word 'cpu' with 'core' in the SCLP interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES. The core-id is an 8-bit field, the maximum thread id is in the range 0-31. The theoretical limit for the CPU address is therefore 8191. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15s390/keyboard: avoid off-by-one when using strnlen_user()Jan Kara1-5/+8
strnlen_user() returns the length of the string including terminating 0. So avoid counting it again and unnecessarily reducing maximum string size by 1. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15s390/sclp: pass timeout as HZ independent valueNicholas Mc Guire1-2/+1
schedule_timeout takes a timeout in jiffies but the code currently is passing in a constant SDIAS_SLEEP_TICKS, as this is otherwise unused it is replaced by 500ms as recommended by Michael Holzheu <holzheu@linux.vnet.ibm.com> and converted with msecs_to_jiffies(); As SDIAS_SLEEP_TICKS was only used in this one location it is dropped. Patch was compile tested with (s390) defconfig + CONFIG_MARCH_Z10=y, (implies CONFIG_CRASH_DUMP=y) Patch is against 4.1-rc5 (localversion-next is -next-20150529) Link: http://lkml.org/lkml/2015/5/29/235 Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-15s390/sclp: Use DECLARE_BITMAPJoe Perches1-1/+1
Use the generic mechanism to declare a bitmap instead of unsigned long. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13s390/sclp: move sclp_facilities into "struct sclp"David Hildenbrand4-11/+8
Let's also move the facilities into the sclp struct, so we can avoid another separate external variable. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.