aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio/css.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-12-16s390/cio: Delay scan for newly available I/O devicesPeter Oberparleiter1-0/+1
The CIO layer scans for newly available I/O devices by performing a scan of available subchannels using the Store Subchannel (STSCH) instruction. Performing too many STSCH instructions in a tight loop can cause high Hypervisor overhead which can negatively impact the performance of the virtual machine as a whole. A subchannel scan is triggered for example during a hardware event that indicates that a channel path has become available. It is also triggered by the DASD device driver for each device that is set online. This patch reduces the number of STSCH instructions being performed by delaying the start of the actual subchannel scan by 1 second. Multiple scan requests that are scheduled during this time will be merged into a single scan loop. The trade-off consists of a short delay that is introduced between the time that the event is processed and a newly available device becoming usable. This delay should be acceptable since it only affects devices that have not been in use before. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30s390/hibernate: add early resume functionSebastian Ott1-2/+0
Some functions that do arch specific resume actions are called directly from swsusp_asm64.S . Before we add another function call provide a generic s390_early_resume function which can be used for this purpose. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/css: remove unused function definitionsSebastian Ott1-2/+0
Make css_probe_device static and remove an unimplemented prototype. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/css: introduce cio_register_early_subchannelsSebastian Ott1-0/+1
Use cio_register_early_subchannels to register early subchannels which are already in use. Call this function before we do the actual subchannel scanning loop. This helps us to get rid of some more special cases regarding the console subchannel. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: get rid of static console subchannelSebastian Ott1-0/+1
Remove the static console subchannel (and friends) and use dynamic allocation for these structures. With this change the console subchanel is treated (mostly) like any other subchannel and we can remove some special cases. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck1-3/+0
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse warnings about missing prototypesMartin Schwidefsky1-0/+2
Add prototypes and includes for functions used in different modules. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15[S390] css_bus_type: make it staticSebastian Ott1-6/+0
Make css_bus_type static. Subchannel drivers have to use css_driver_register. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15[S390] css_driver: remove duplicate membersSebastian Ott1-4/+0
Remove the owner and name members of struct css_driver and convert all drivers to store this data in the embedded struct device_driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] cio: trigger subchannel event at resume timeSebastian Ott1-0/+1
ccw_device_pm_restore: trigger subchannel event to better handle changes to the subchannel device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] cio: make wait_events interruptibleSebastian Ott1-1/+1
Make the potentially long blocking wait_event's used by the cio settle mechanism interruptible. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] cio: consolidate workqueuesSebastian Ott1-1/+1
We used to maintain 2 singlethreaded workqueues for synchronization and to trigger work from interrupt context. Since our latest cio changes we only use one of these workqueues. So get rid of the unused workqueue, rename the remaining one to "cio_work_q" and move its ownership to the channel subsystem driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] cio: introduce subchannel todosPeter Oberparleiter1-0/+3
Ensure that current and future users of sch->work do not overwrite each other by introducing a single mechanism for delayed subchannel work. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-22[S390] cio: idset use actual number of ssidsSebastian Ott1-0/+1
The functions idset_sch_new and for_each_subchannel_staged use different values for the number of subchannel sets. Make it consistent by changing idset_sch_new to also use the actual number of subchannel sets. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-22[S390] cio: introduce css_settleSebastian Ott1-0/+2
Introduce the css_driver callback settle which can be implemented by a subchannel driver to wait for the subchannel type specific asynchronous work to finish. In channel_subsystem_init_sync we call that for each subchannel driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: css bus power management callbacksSebastian Ott1-0/+10
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-14[S390] cio: Add chsc subchannel driver.Cornelia Huck1-2/+1
This patch adds a driver for subchannels of type chsc. A device /dev/chsc is created which may be used to issue ioctls to: - obtain information about the machine's I/O configuration - dynamically change the machine's I/O configuration via asynchronous chsc commands Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] css: Use css_device_id for bus matching.Cornelia Huck1-1/+1
css_device_id exists, so use it for determining the right driver (and add a match_flags which is always 1 for valid types). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: Repair chpid event handling.Cornelia Huck1-1/+2
Passing the affected chpid in chp_event() worked only by chance since chpid is the first element in res_acc_data. Make it work properly by generalizing res_acc_data as chp_link and always passing around a properly filled out chp_link structure in chp_event(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: Cleanup crw interface.Cornelia Huck1-1/+0
Eliminate the need for the machine check handler to call into the common I/O layer directly by introducing an interface to register handlers for crws per rsc. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: Rework css driver.Cornelia Huck1-21/+17
Rework the css driver methods to provide sane callbacks for subchannels of all types. As a bonus, this cleans up and simplyfies the machine check handling for I/O subchannels a lot. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: Introduce modalias for css bus.Cornelia Huck1-2/+0
Add modalias and subchannel type attributes for all subchannels. I/O subchannel specific attributes are now created in io_subchannel_probe(). modalias and subchannel type are also added to the uevent for the css bus. Also make the css modalias known. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: Register all subchannels.Cornelia Huck1-2/+0
Register all valid subchannels, not only I/O subchannels. Move I/O subchannel specific initialization to io_subchannel_probe(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] cio: Fix race for "fast" path gone/path back situations.Cornelia Huck1-0/+1
Make sure we wait for previous evaluations triggered by path state changes to have settled before we manipulate path states again. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-01-26[S390] cio: reduce cpu utilization during device scanPeter Oberparleiter1-0/+3
Minimize calls to cpu intensive function get_subchannel_by_schid() by introducing function for_each_subchannel_staged() which temporarily caches the information about registered subchannels in a bitmap. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Set driver->owner on css, ccw and ccwgroup busses.Cornelia Huck1-0/+1
Set the owner field in the embedded struct device_driver to the value provided in the {css,ccw,ccwgroup}_driver. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: I/O subchannel specific fields.Cornelia Huck1-0/+2
Some fields may be !0 only for I/O subchannels. Add some checks where required. Also adapt cio_enable_subchannel() to make the caller specify the intparm, which makes it more generic. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Introduce subchannel->private.Cornelia Huck1-58/+0
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Add css_driver_{register,unregister}.Cornelia Huck1-0/+4
Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: css_driver: Use consistent parameters.Cornelia Huck1-4/+4
Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Use helpers instead of container_of().Cornelia Huck1-0/+2
- Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] cio: remove subchannel_add_files()Cornelia Huck1-1/+0
subchannel_add_files() no longer exists, remove from header. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-10-12[S390] cio: rename css to channel_subsystemsCornelia Huck1-1/+1
Rename css[] to channel_subsystems[] to avoid name clashes. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-07-27[S390] cio: css_sch_device_register() can be made static.Cornelia Huck1-1/+0
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10[S390] cio: Make some structures and a function static.Cornelia Huck1-2/+0
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: fix subchannel channel-path data usagePeter Oberparleiter1-0/+1
Ensure that channel-path related subchannel data is only retrieved and used when it is valid and that it is updated when it may have changed. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: replace subchannel evaluation queue with bitmapPeter Oberparleiter1-7/+3
Use a bitmap for indicating which subchannels require evaluation instead of allocating memory for each evaluation request. This approach reduces memory consumption during recovery in case of massive evaluation request occurrence and removes the need for memory allocation failure handling. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Channel-path configure function.Peter Oberparleiter1-2/+2
Add a new attribute to the channel-path sysfs directory through which channel-path configure operations can be triggered. Also listen for hardware events requesting channel-path configure operations and process them accordingly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Introduce separate files for channel-path related code.Peter Oberparleiter1-0/+1
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-02-05[S390] Get rid of a lot of sparse warnings.Heiko Carstens1-0/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] Use dev->groups for adding/removing the subchannel attribute group.Cornelia Huck1-0/+1
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] Support for disconnected devices reappearing on another subchannel.Cornelia Huck1-0/+4
- create a 'pseudo_subchannel' per channel subsystem (the 'orphanage') - use the orphanage as a shelter for ccw_devices that can't remain on the same subchannel Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] Some preparations for the dynamic subchannel mapping patch.Cornelia Huck1-0/+2
- Move adding subchannel attributes to css_register_subchannel(). - Don't call device_trigger_reprobe() for non-operational devices. - Introduce io_subchannel_create_ccwdev(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-08[S390] more workqueue fixes.Martin Schwidefsky1-0/+2
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] cio: Retry internal operations after vary off.Cornelia Huck1-0/+2
If I/O was running on a just varied off chpid, it will be terminated. If this was a common I/O layer internal I/O, it needs to be retried. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] cio: Use path verification for last path gone after vary off.Cornelia Huck1-0/+1
If the last path to a device is gone after a chpid has been varied off, putting it on the slow queue doesn't prevent a device driver from still attempting to use it (it may stay on the slow queue for a long time). Instead, trigger a verify event which will prevent I/O attempts from the device driver immediately. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-11[S390] cio: Remove grace period for vary off chpid.Cornelia Huck1-1/+1
The grace period handling introduced needless complexity. It didn't help the dasd driver (which can handle terminated I/O just well), and it doesn't help for long running channel programs (which won't complete during the grace period anyway). Terminating I/O using a path that just disappeared immediately is much more consistent with what the user expects. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-11[S390] cio: Use ccw_dev_id and subchannel_id in ccw_device_privateCornelia Huck1-3/+2
Use the proper structures to identify device and subchannel. Change get_disc_ccwdev_by_devno() to get_disc_ccwdev_by_dev_id(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] path grouping and path verifications fixes.Cornelia Huck1-1/+1
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] subchannel register/unregister mutex.Cornelia Huck1-0/+2
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.