aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio/device.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-10s390/cio: fix virtio-ccw DMA without PVHalil Pasic1-1/+1
Commit 37db8985b211 ("s390/cio: add basic protected virtualization support") breaks virtio-ccw devices with VIRTIO_F_IOMMU_PLATFORM for non Protected Virtualization (PV) guests. The problem is that the dma_mask of the ccw device, which is used by virtio core, gets changed from 64 to 31 bit, because some of the DMA allocations do require 31 bit addressable memory. For PV the only drawback is that some of the virtio structures must end up in ZONE_DMA because we have the bounce the buffers mapped via DMA API anyway. But for non PV guests we have a problem: because of the 31 bit mask guests bigger than 2G are likely to try bouncing buffers. The swiotlb however is only initialized for PV guests, because we don't want to bounce anything for non PV guests. The first such map kills the guest. Since the DMA API won't allow us to specify for each allocation whether we need memory from ZONE_DMA (31 bit addressable) or any DMA capable memory will do, let us use coherent_dma_mask (which is used for allocations) to force allocating form ZONE_DMA while changing dma_mask to DMA_BIT_MASK(64) so that at least the streaming API will regard the whole memory DMA capable. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Fixes: 37db8985b211 ("s390/cio: add basic protected virtualization support") Link: https://lore.kernel.org/lkml/20190930153803.7958-1-pasic@linux.ibm.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-30drivers: Introduce device lookup variants by nameSuzuki K Poulose1-14/+1
Add a helper to match the device name for device lookup. Also reuse this generic exported helper for the existing bus_find_device_by_name(). and add similar variants for driver/class. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wpan@vger.kernel.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-12Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-6/+4
Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-26drivers: s390/cio: Fix compilation warning about const qualifiersSuzuki K Poulose1-3/+1
Update __ccwdev_check_busid() and __ccwgroupdev_check_busid() to use "const" qualifiers to fix the compiler warning. Reported-by: kbuild test robot <lkp@intel.com> Cc: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24driver_find_device: Unify the match function with class_find_device()Suzuki K Poulose1-1/+1
The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose1-2/+2
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-15s390/cio: add basic protected virtualization supportHalil Pasic1-11/+57
As virtio-ccw devices are channel devices, we need to use the dma area within the common I/O layer for any communication with the hypervisor. Note that we do not need to use that area for control blocks directly referenced by instructions, e.g. the orb. It handles neither QDIO in the common code, nor any device type specific stuff (like channel programs constructed by the DASD driver). An interesting side effect is that virtio structures are now going to get allocated in 31 bit addressable storage. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2018-03-26s390/cio: fix unbind of io_subchannel_driverSebastian Ott1-8/+8
If the io_subchannel_driver is unbound from a subchannel it bluntly kills all I/O on the subchannel and sets the ccw_device state to not operable before deregistering the ccw_device. However, for online devices we should set the device offline (disband path groups etc.) which does not happen if the device is in not oper state. Simply deregister the ccw device - ccw_device_remove is smart enough to set the device offline properly. If everything fails call io_subchannel_quiesce afterwards as a safeguard. Reported-by: Shalini Chellathurai Saroja <shalini@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches1-4/+4
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches1-1/+1
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-24s390: drivers: Remove redundant license textGreg Kroah-Hartman1-2/+0
Now that the SPDX tag is in all drivers/s390/ files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Halil Pasic <pasic@linux.vnet.ibm.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-24s390: cio: add SPDX identifiers to the remaining filesGreg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/s390/cio/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-14s390/cio: Convert timers to use timer_setup()Kees Cook1-4/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-09-19s390/cio: recover from bad pathsSebastian Ott1-3/+9
In some situations we don't receive notification from firmware that a previously unusable channelpath is usable again. Schedule recovery for devices that return from path verification without using all potentially usable paths. The recovery thread will periodically trigger a path verification on the affected devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Suggested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26s390/cio: constify attribute_group structures.Arvind Yadav1-2/+2
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-12s390/cio: introduce io_subchannel_typeSebastian Ott1-42/+0
The sysfs attributes implemented by the vfio_ccw driver are also implemented by the io_subchannel driver. Move these into a device_type which is set by the css bus. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>Ingo Molnar1-0/+1
Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-31s390: cio: make it explicitly non-modularPaul Gortmaker1-3/+3
The Makefile currently controlling compilation of this code is: obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \ fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o ccw_device-objs += device.o device_fsm.o device_ops.o ccw_device-objs += device_id.o device_pgid.o device_status.o obj-y += ccw_device.o cmf.o ...meaning that the files here are not being built as modular. Lets remove the couple traces of modular infrastructure use, so that when reading the code there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We replace module.h with export.h where the file does export some symbols. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Arnd Bergmann <arndb@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-08-08s390/cio: remove subchannel_id from ccw_device_privateSebastian Ott1-2/+0
A copy of struct subchannel_id is maintained in ccw_device_private. The subchannel id is a property of the subchannel. The additional copy is not needed. Internal users can obtain it from subchannel.schid - device drivers can use ccw_device_get_schid(). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390: Use pr_warn instead of pr_warningJoe Perches1-13/+10
Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: fix use after free in cmb processingSebastian Ott1-0/+2
Devices with active channel measurement are included in a list. When a device is removed without deactivating channel measurement first the list_head is freed but still used. Fix this by making sure that channel measurement is deactivated during device deregistration. For devices that we deregister because they are no longer accessible deactivating channel measurement will fail. In this case we can report success because the FW will no longer access the measurement block. In addition to these steps keep an extra device reference while channel measurement is active. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: use device_lock during cmb activationSebastian Ott1-1/+1
Hold the device_lock during [de]activation of the channel measurement block to synchronize concurrent usage of these functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/cio: set device name as early as possibleSebastian Ott1-35/+36
Currently we set the device name at the time we call device_add after we receive the interrupt for the first I/O. When something is not working as expected during that first I/O (e.g. we don't receive an interrupt) we print a message including the device name which has not yet been initialized. Set the device name after calling device_initialize (prior to starting the first I/O) so that we have the name present if some unexpected error occurs during that first I/O. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/cio: fix irq stats for early interrupts on ccw consolesSebastian Ott1-8/+14
Interrupts which happen on ccw consoles prior to their registration with the driver core are not accounted to the respective device driver. Fix this by setting the proper interrupt class during initialization of ccw consoles. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/cio: reorder initialization of ccw consolesSebastian Ott1-12/+17
Drivers for ccw consoles use ccw_device_probe_console to receive an initialized ccw device which is already enabled for interrupts. After that the device driver does the initialization of its private data. This can race with unsolicited interrupts which can happen once the device is enabled for interrupts. Split ccw_device_probe_console into ccw_device_create_console and ccw_device_enable_console and reorder the initialization of the ccw console drivers. While at it mark these functions as __init. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-02-21s390/cio: fix driver callback initialization for ccw consolesSebastian Ott1-1/+2
ccw consoles are in use before they can be properly registered with the driver core. For devices which are in use by a device driver we rely on the ccw_device's pointer to the driver callbacks to be valid. For ccw consoles this pointer is NULL until they are registered later during boot and we dereferenced this pointer. This worked by chance on 64 bit builds (cdev->drv was NULL but the optional callback cdev->drv->path_event was also NULL by coincidence) and was unnoticed until we received reports about boot failures on 31 bit systems. Fix it by initializing the driver pointer for ccw consoles. Cc: <stable@vger.kernel.org> # 3.10+ Reported-by: Mike Frysinger <vapier@gentoo.org> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/cio: use device_lock to synchronize calls to the ccw driverSebastian Ott1-10/+6
When calling set_{on,off}line of a ccw device driver we hold the module reference of the owner. This is pretty useless - we don't want to prevent module unloading but driver unbinding. Use the driver core's device_lock instead. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16s390/cio: fix unlocked access of online memberSebastian Ott1-4/+9
Make sure that access to the online member of a ccw device is guarded by the ccwlock. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-22s390: replace strict_strtoul() with kstrtoul()Jingoo Han1-1/+1
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: fix early init counter usageSebastian Ott1-7/+6
Via ccw_device_init_count we keep track of how many devices are in asynchronous device recognition/initialization. For early devices this variable was not only used prior to its initialization but used incorrectly (incremented but never decremented). Fix this by using static initialization for this variable (and friends), make them visible to device.c only, and decrement the counter after recognition of early devices is finished. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: get rid of static console deviceSebastian Ott1-43/+30
Remove the static console ccw device (and friends) and use dynamic allocation for these structures. With this change the console device is treated (mostly) like any other ccw device and we can remove some special cases. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: get rid of static console subchannelSebastian Ott1-12/+12
Remove the static console subchannel (and friends) and use dynamic allocation for these structures. With this change the console subchanel is treated (mostly) like any other subchannel and we can remove some special cases. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: ccw_device_force_console don't use static variableSebastian Ott1-4/+2
force_console is used to wake up the CCW based console device to print a panic message in case something goes wrong in a suspend or resume cycle. Stop using the static console_subchannel and add a parameter to this function to specify which ccw device we have to wake up. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/cio: wait_cons_dev don't use static variableSebastian Ott1-2/+25
wait_cons_dev is used to busy wait for an interrupt on the console ccw device. Stop using the static console_subchannel and add a parameter to this function to specify on which ccw device/subchannel we have to do the polling. While at it rename the function to ccw_device_wait_idle and move it to device.c Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14s390/cio: export vpm via sysfsSebastian Ott1-0/+10
Add new attribute "vpm" to the subchannel sysfs directory of I/O subchannels. This attribute contains a path mask indicating which channel paths were successfully verified to be usable for I/O. Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens1-6/+6
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-23s390: use ccw_device_get_schidSebastian Ott1-11/+0
Let the dasd driver and qdio use ccw_device_get_schid and get rid of other similar functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-26s390/cio: suppress 2nd path verification during resumeSebastian Ott1-7/+1
Do not trigger a path verification in the subchannel event function during resume from hibernate. This will be started by the pm_restore callback later. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-06s390/cio: invalidate cdev pointer before deregistrationSebastian Ott1-1/+4
Make sure that the cdev pointer for IO subchannels is set to NULL when we deregister the device (and release its last reference). This will fix a bug were another process operates on an already freed ccw device. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-06s390/cio: fix IO subchannel event raceSebastian Ott1-0/+2
If the subchannel event function is called from IRQ context and we observe that the subchannel in question is gone we flag the attached device as not operational and schedule the event function to be called again from process context where the subchannel gets deregistered. However if the subchannel reappeared at the time the event function gets called from process context we would do nothing and leave the device in not operational state. Recognize this case in sch_get_action and trigger reexamination of the subchannel/device. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens1-2/+1
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-05-16s390/ccwgroup: exploit ccwdev_by_dev_idSebastian Ott1-1/+12
Instead of finding devices via driver_find_device use the bus_find_device wrapper get_ccwdev_by_dev_id. This allows us to get rid of the ccw_driver argument of ccwgroup_create_dev and thus simplify the interface. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-01-24cio: remove {get,put}_driverSebastian Ott1-7/+1
Remove useless {get,put}_driver - the caller of the functions has to ensure valid driver pointers. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-01[S390] hibernate: directly trigger subchannel evaluationSebastian Ott1-2/+2
Using the generic css_schedule_eval to evaluate subchannels while resuming from hibernation is very slow when used with many devices. Provide a new evaluation trigger which exploits css_sched_sch_todo and use this in the resume callback for ccw devices. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix mismatch in summation of I/O IRQ statisticsPeter Oberparleiter1-0/+13
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-04-04[S390] cio: prevent purging of CCW devices in the online statePeter Oberparleiter1-6/+18
The cio_ignore purge function is intended to only remove CCW devices which are in the offline state. There is a time frame after the purge function finished where a CCW device is scheduled for removal but still accessible. When the device is set online during this time frame, it may first appear online before it is then removed. Fix this by preventing that CCW devices can be set online while there is work (such as removal triggered by the purge function) for it pending. Also ensure that the purge function does not schedule devices for removal which are in the process of being set online. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23[S390] ccw_bus_type: make it staticSebastian Ott1-3/+2
Make ccw_bus_type static. ccw_device drivers have to use ccw_driver_register. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-23[S390] ccw_driver: remove duplicate membersSebastian Ott1-4/+2
Remove the owner and name members of struct ccw_driver and convert all drivers to store this data in the embedded struct device_driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15[S390] css_driver: remove duplicate membersSebastian Ott1-2/+4
Remove the owner and name members of struct css_driver and convert all drivers to store this data in the embedded struct device_driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-15[S390] css: move io_private to drv_dataSebastian Ott1-6/+11
Use the subchannels drv_data to access io_subchannel_private for io subchannels. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.