aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-26s390/cio: update measurement characteristicsSebastian Ott2-9/+20
Per channel path measurement characteristics are obtained during channel path registration. However if some properties of a channel path change we don't update the measurement characteristics. Make sure to update the characteristics when we change the properties of a channel path or receive a notification from FW about such a change. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/cio: ensure consistent measurement stateSebastian Ott2-12/+13
Make sure that in all cases where we could not obtain measurement characteristics the associated fields are set to invalid values. Note: without this change the "shared" capability of a channel path for which we could not obtain the measurement characteristics was incorrectly displayed as 0 (not shared). We will now correctly report "unknown" in this case. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/cio: fix measurement characteristics memleakSebastian Ott3-18/+6
Measurement characteristics are allocated during channel path registration but not freed during deregistration. Fix this by embedding these characteristics inside struct channel_path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/cio: Change I/O instructions from inline to normal functionsPeter Oberparleiter3-208/+238
Adding tracepoints to inline functions adds tracepoint invocation code for each instance where the function is inlined. The resulting increase in kernel code size can have negative impact: - More cache misses in instruction cache - Reduced amount of DMA-capable memory Therefore change all functions implementing I/O instructions from inline to normal functions. Bloat-o-meter summary after change (using performance_defconfig): add/remove: 24/2 grow/shrink: 4/39 up/down: 2205/-4858 (-2653) Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/cio: Introduce common I/O layer tracepointsPeter Oberparleiter6-1/+419
Add tracepoints to interrupt handler and core inline assemblies used by the s390 common I/O layer. These tracepoints can be used to monitor and validate hardware and hypervisor requests and responses. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/cio: Consolidate inline assemblies and related data definitionsPeter Oberparleiter4-60/+73
Replace the current semi-arbitrary distribution of inline assemblies: - Inline assemblies used by CIO go into ioasm.h - Data definitions used by inline assemblies go into cio.h Beyond cleaning up the current structure this is also required for use of tracepoints in inline assemblies introduced by a follow-on patch. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/cio: Fix incorrect xsch opcode specificationPeter Oberparleiter1-1/+1
The numeric representation of the xsch instruction was incorrectly specified, resulting in reserved fields of the instruction opcode potentially being set to a non-zero value. While this doesn't currently cause any problem, a future architecture might make use of these fields so that the current specification could result in an exception or unwanted side-effects. Fix this by using the xsch instruction code for which support in binutils was added in 2003. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/cio: Remove unused inline assembliesPeter Oberparleiter5-31/+16
There is no longer a need to maintain two versions of the same inline assembly - one with exception handling, and one without - so get rid of the duplicates and adjust names accordingly. This applies to stsch_err and msch_err which are now renamed to stsch and msch respectively, while the original msch function is removed. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390: Delete unnecessary checks before the function call "debug_unregister"Markus Elfring3-12/+6
The debug_unregister() function performs also input parameter validation. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: rework CPU register dump codeMartin Schwidefsky1-1/+1
To collect the CPU registers of the crashed system allocated a single page with memblock_alloc_base and use it as a copy buffer. Replace the stop-and-store-status sigp with a store-status-at-address sigp in smp_save_dump_cpus() and smp_store_status(). In both cases the target CPU is already stopped and store-status-at-address avoids the detour via the absolute zero page. For kexec simplify s390_reset_system and call store_status() before the prefix register of the boot CPU has been set to zero. Use STPX to store the prefix register and remove dump_prefix_page. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390: add support for ipl devices in subchannel sets > 0Sebastian Ott3-20/+46
Allow to ipl from CCW based devices residing in any subchannel set. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/cio: simplify css_generate_pgidSebastian Ott1-5/+0
Simplify the css_generate_pgid code by using stap() independent of CONFIG_SMP. For !CONFIG_SMP builds stap() will deliver the address of the cpu we IPL'ed from (which can be != 0). Note: the ifdef was likely added to be compatible with _very_ old machines which we don't support anyway. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds8-237/+243
Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
2015-11-03s390/cio: de-duplicate subchannel validationPierre Morel1-23/+4
cio_validate_io_subchannel() and cio_validate_msg_subchannel() are identical, as the called functions already take care about the differences between subchannel types. Just inline the code into the only user, cio_validate_subchannel(), instead. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-03s390/css: unneeded initialization in for_each_subchannelPierre Morel1-1/+0
The ret variable is always set by the fn function. There is no need to initialize it. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/cio: move ccw_device_stlck functionsSebastian Ott3-70/+60
device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal functions that handle unconditional reserve + release to device_pgid.c Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/cio: move ccw_device_call_handlerSebastian Ott3-48/+38
device_ops.c should only contain functions that are called by ccw device drivers. Move the cio internal function ccw_device_call_handler to device_fsm.c where it's used. Remove some useless comments while at it. Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-27s390/nmi: remove castsHeiko Carstens1-3/+3
Remove all the casts to and from the machine check interruption code. This patch changes struct mci to a union, which contains an anonymous structure with the already known bits and in addition an unsigned long field, which contains the raw machine check interruption code. This allows to simply assign and decoce the interruption code value without the need for all those casts we had all the time. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: introduce pathmask_to_posSebastian Ott1-2/+2
We often need to correlate an 8 bit path mask with the position in a channel path array. Introduce and use pathmask_to_pos for that task. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: reactivate cmf after hibernateSebastian Ott3-0/+15
During resume from hibernate we already reenable measurement block updates on a per device basis. In addition to that we also need to activate channel measurement globally using the set channel monitor instruction. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: use kmem_cache for extended measurement block allocationSebastian Ott1-38/+26
Extended measurement blocks need to be 64 byte aligned. To achieve that 128 bytes for each measurement block are allocated and an align callback returns a 64 byte aligned address inside this area. Replace this code with kmem_cache allocations. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: fix memleak in channel measurementSebastian Ott1-1/+3
The measurement block for the extended measurement data is not freed when switching off per device measurement. Free the measurement block after HW stopped accessing it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: improve locking during cmbe allocationSebastian Ott1-20/+23
During allocation of extended measurement blocks we check if the device is already active for channel measurement and add the device to a list of devices with active channel measurement. The check is done under ccwlock protection and the list modification is guarded by a different lock. To guarantee that both states are in sync make sure that both locks are held during the allocation process (like it's already done for the "normal" measurement block allocation). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: fix use after free in cmb processingSebastian Ott2-11/+18
Devices with active channel measurement are included in a list. When a device is removed without deactivating channel measurement first the list_head is freed but still used. Fix this by making sure that channel measurement is deactivated during device deregistration. For devices that we deregister because they are no longer accessible deactivating channel measurement will fail. In this case we can report success because the FW will no longer access the measurement block. In addition to these steps keep an extra device reference while channel measurement is active. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: use device_lock during cmb activationSebastian Ott2-13/+38
Hold the device_lock during [de]activation of the channel measurement block to synchronize concurrent usage of these functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14s390/cio: cleanup cmb_enable sysfs attrSebastian Ott1-8/+14
Ensure that we hold the ccwlock when accessing private data. Return errors that occur during measurement enabling to userspace. Apply some cleanups while at it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-07s390/qdio: fix WARN_ON_ONCE conditionEugene Crosser1-2/+2
If HiperSockets Completion Queueing is enabled, qdio always issues a warning, since the condition is always met. This patch fixes the condition in WARN_ON_ONCE that was always true. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07s390: remove unneeded variablesPeter Senna Tschudin1-2/+1
This patch remove unneeded variables used to store return values. These issues were detected with the Coccinelle script: scripts/coccinelle/misc/returnvar.cocci [heiko.carstens@de.ibm.com]: make qeth_l[2/3]_stop() return void Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-22s390/cio: Implement proper Link Incident Record handlingPeter Oberparleiter1-42/+123
A hardware problem on a FICON link is reported by the Channel Subsystem to the operating system via a Link Incident Record (LIR). In response, the operating system should issue a message that enables hardware service personnel to identify and repair the failing component. Current Linux LIR handling is broken because LIR data is incorrectly interpreted and no log message is generated. This patch fixes Linux LIR handling by implementing a new log message for LIRs indicating a degraded or non-operational link. Also LIRs are no longer used to deactivate channel paths because the available data does not reliably allow to determine the affected channel path. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-22s390/cio: Fix commaPeter Oberparleiter1-1/+1
After dutifully acting as statement separator for 6 long years, this comma has finally grown into a full semicolon. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15s390: remove use of seq_printf return valueJoe Perches1-5/+7
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25s390: remove 31 bit supportHeiko Carstens3-12/+0
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22s390: add SMT supportMartin Schwidefsky1-1/+1
The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-08s390/cio: idset.c: remove some unused functionsRickard Strandqvist2-22/+0
Removes some functions that are not used anywhere: idset_clear() idset_sch_get_first() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-08s390/eadm: change timeout valueSebastian Ott1-1/+1
Tests have shown that 5 seconds is sometimes not enough for an IRQ to arrive (especially when the device is doing garbage collection). Let's wait a little longer. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-15Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds5-8/+8
Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-2/+2
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14s390/cio: replace strnicmp with strncasecmpRasmus Villemoes1-2/+2
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09s390/nohz: use a per-cpu flag for arch_needs_cpuMartin Schwidefsky2-2/+2
Move the nohz_delay bit from the s390_idle data structure to the per-cpu flags. Clear the nohz delay flag in __cpu_disable and remove the cpu hotplug notifier that used to do this. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-08-26s390: cio driver &__get_cpu_var replacementsChristoph Lameter5-8/+8
Use this_cpu_ptr() instead of &__get_cpu_var() Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-22s390/qdio: add helpers to manage qdio buffersSebastian Ott1-0/+53
Users of qdio buffers employ different strategies to manage these buffers. The qeth driver uses huge contiguous buffers which leads to high order allocations with all their downsides. This patch provides helpers to allocate, free, and reset arrays of qdio buffers using non contiguous pages. Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: use ccwgroup_ungroup wrapperSebastian Ott1-12/+2
To ungroup and deregister the group device always use the ccwgroup_ungroup wrapper. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: fix an uninitialized return codeSebastian Ott1-4/+5
Since commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" the return code of ccwgroup_ungroup_store is uninitialized. Make sure the rc is always initialized. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/ccwgroup: obtain extra reference for asynchronous processingSebastian Ott1-1/+4
Commit 0b60f9ead5d4816e7e3d6e28f4a0d22d4a1b2513 "s390: use device_remove_file_self() instead of device_schedule_callback()" changed ccwgroup to use an extra work queue instead of device_schedule_callback. This function obtained an extra device reference for its async work which is missing in the new implementation and results in a "freeing memory with a lock still held" BUG. Fix this by obtaining an extra reference for the async work. Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16qdio: Keep device-specific dbf entriesStefan Raspl3-13/+77
Keep the per-device dbf entries until module is removed, with proper error checking for debug feature setup. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-16s390/cio: set device name as early as possibleSebastian Ott1-35/+36
Currently we set the device name at the time we call device_add after we receive the interrupt for the first I/O. When something is not working as expected during that first I/O (e.g. we don't receive an interrupt) we print a message including the device name which has not yet been initialized. Set the device name after calling device_initialize (prior to starting the first I/O) so that we have the name present if some unexpected error occurs during that first I/O. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/airq: silence lockdep warningSebastian Ott1-7/+6
airq_iv_(alloc|free) is called by some users with interrupts enabled and by some with interrupts disabled which leads to the following lockdep warning: [ INFO: possible irq lock inversion dependency detected ] 3.14.0-15249-gbf29b7b-dirty #25 Not tainted --------------------------------------------------------- insmod/2108 just changed the state of lock: (&(&iv->lock)->rlock){+.....}, at: [<000000000046ee3e>] airq_iv_alloc+0x62/0x228 but this lock was taken by another, HARDIRQ-READ-safe lock in the past: (&info->lock){.-.-..} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&iv->lock)->rlock); local_irq_disable(); lock(&info->lock); lock(&(&iv->lock)->rlock); <Interrupt> lock(&info->lock); *** DEADLOCK *** Although this is a false alarm (since each airq user consistently calls these functions from the same context) fix this by ensuring that interrupts are disabled when the airq lock is held. Reported-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/qdio: replace shift loop by ilog2Fabian Frederick1-4/+3
account_sbals is called by get_inbound_buffer_frontier and get_outbound_buffer_frontier with 'count' value > 0 so we can safely convert shift loop to ilog2. Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/cio: silence lockdep warningSebastian Ott1-0/+2
On systems where a ccw based console device is used a lockdep false alarm could be triggered when a device driver calls printk while holding a subchannels lock (e.g. in it's irq handler). Since this is valid behavior fix this by introducing a separate lock class for the console subchannels lock. The lockdep warning was revealed by "printk: enable interrupts before calling console_trylock_for_printk()" which changed console_unlock() to be called with lockdep enabled. [ INFO: possible recursive locking detected ] 3.15.0-rc5-next-20140520 #1 Not tainted --------------------------------------------- ccwgroup/2239 is trying to acquire lock: (&(sch->lock)->rlock){-.-...}, at: [<0000000000642a52>] raw3215_write+0x52/0x200 but task is already holding lock: (&(sch->lock)->rlock){-.-...}, at: [<00000000005fd160>] do_cio_interrupt+0x60/0x108 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(sch->lock)->rlock); lock(&(sch->lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 8 locks held by ccwgroup/2239: stack backtrace: CPU: 3 PID: 2239 Comm: ccwgroup Not tainted 3.15.0-rc5-next-20140520 #1 0000000036fab518 0000000036fab528 0000000000000002 0000000000000000 0000000036fab5b8 0000000036fab530 0000000036fab530 00000000001116e8 0000000000000000 0000000000986ec4 00000000009701b6 000000000000000b 0000000036fab578 0000000036fab518 0000000000000000 0000000000000000 0000000000000000 00000000001116e8 0000000036fab518 0000000036fab578 Call Trace: ([<0000000000111626>] show_trace+0x14e/0x158) [<000000000011169a>] show_stack+0x6a/0xe8 [<00000000007c6e72>] dump_stack+0x82/0xb0 [<00000000001a95f2>] validate_chain.isra.37+0xa4a/0xbb0 [<00000000001acaca>] __lock_acquire+0x4da/0xcd0 [<00000000001ada1a>] lock_acquire+0xba/0x218 [<00000000007cd634>] _raw_spin_lock_irqsave+0x6c/0xb8 [<0000000000642a52>] raw3215_write+0x52/0x200 [<0000000000643d16>] con3215_write+0x76/0xf8 [<00000000001bd87a>] call_console_drivers.constprop.25+0xfa/0x210 [<00000000001be0b0>] console_unlock+0x3e0/0x4e8 [<00000000001be450>] vprintk_emit+0x298/0x6e0 [<00000000005aa210>] dev_vprintk_emit+0xe0/0x1a8 [<00000000005aa320>] dev_printk_emit+0x48/0x50 [<00000000005aa390>] __dev_printk+0x68/0xb0 [<00000000005aa7c2>] _dev_info+0x62/0x70 [<0000000000657bf0>] qeth_l2_send_setmac_cb+0xd0/0x190 [<0000000000651a1e>] qeth_send_control_data_cb+0x3a6/0x6a8 [<0000000000655546>] qeth_irq+0x1a6/0xac0 [<000000000060a0ac>] ccw_device_call_handler+0xa4/0xc0 [<0000000000608b62>] ccw_device_irq+0x5a/0x190 [<00000000005fd1ca>] do_cio_interrupt+0xca/0x108 [<00000000001c0a2e>] handle_irq_event_percpu+0x5e/0x378 [<00000000001c46fc>] handle_percpu_irq+0x6c/0x98 [<00000000001c0066>] generic_handle_irq+0x46/0x68 [<000000000010b5b6>] do_IRQ+0x5e/0x88 [<00000000007cf304>] io_call+0x6/0x20 [<000000000064c63a>] qeth_send_control_data+0x322/0x570 ([<000000000064c50e>] qeth_send_control_data+0x1f6/0x570) [<0000000000651db2>] qeth_send_ipa_cmd+0x92/0x120 [<000000000065b310>] __qeth_l2_set_online+0x170/0xaa8 [<000000000060ebb6>] ccwgroup_set_online+0x56/0x90 [<000000000060ef96>] ccwgroup_online_store+0xd6/0xe0 [<000000000033d11a>] kernfs_fop_write+0x10a/0x188 [<00000000002bbd00>] vfs_write+0x98/0x1c0 [<00000000002bc8a0>] SyS_write+0x60/0xd0 [<00000000007cee3a>] sysc_nr_ok+0x22/0x28 [<000003fffd0c3f28>] 0x3fffd0c3f28 Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-28s390/lowcore: replace lowcore irb array with a per-cpu variableMartin Schwidefsky6-8/+13
Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.