aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/crypto (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-05-17[S390] avoid default_llseek in s390 driversMartin Schwidefsky1-1/+1
Use nonseekable_open for a couple of s390 device drivers. This avoids the use of default_llseek function which has a dependency on the BKL. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo6-0/+6
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26[S390] seq_file: convert drivers/s390/Alexey Dobriyan1-86/+72
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] zcrypt: Do not remove coprocessor for error 8/72Felix Beck2-0/+4
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] zcrypt: add sanity check before copy_from_user()Heiko Carstens1-1/+3
It's not obvious that copy_from_user() is called with a sane length parameter here. Even though it currently seems to be correct better add a check to prevent stack corruption / exploits. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: remove BKLMartin Schwidefsky1-2/+0
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: Do not simultaneously schedule hrtimerFelix Beck1-3/+8
Protect the hrtimer ap_poll_timer from being scheduled at the same time from several processes. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: adjust speed rating of cex3 adaptersFelix Beck2-2/+2
Cex3 needs a lower speed rating. Otherwise cex2 adapters will be prefered. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: adjust speed rating between cex2 and pcixccFelix Beck1-2/+2
Cards with lower speed rating are prefered. Thus change adjust the speed rating of cex2c adapters to be prefered before pcixcc, although they should not appear in the same machine anyway. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: use definitions for cex3Felix Beck3-28/+67
New definitions are added for CEX3 device types. They will be set in the according probe functions. CEX3 device types will be handled in the same modules as CEX2 device types. In the first step they are the same as CEX2 types, but they can be adjusted for further characteristics of CEX3 easily. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: add support for cex3 device typesFelix Beck4-6/+11
This patch renames the CEX2C2 and CEX2A2 types to CEX3 device types. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: special command support for cex3 exploitationFelix Beck3-5/+23
Support for special command is implemented in the AP Bus in the NQAP function __ap_send. This is extended for a further parameter special. When set, the special bit, in GR0 will be set. Therefor the ap_message struct is extended for a further bit. Thus calling functions of __ap_send can use the special parameter in ap_message to give to __ap_send. Affected is in the first place ap_queue_message, which is called by the actual card driver. The second part of this support is that the card driver for the CEX3C needs to set this special bit, when an according CPRB is sent to the driver. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-07[S390] zcrypt: initialize ap_messages for cex3 exploitationFelix Beck5-0/+22
AP messages need to be initialized, before they will be used. Values will be zeroized. This will be needed later when introducing support for the special commands. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06[S390] zcrypt: Improve some commentsFelix Beck1-3/+6
Improve the comments for switch cases without a break. This fixes some warnings of a code checker tool. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06[S390] zcrypt: Fix sparse warning.Felix Beck1-2/+2
Do not shadow earlier symbol. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-22[S390] zcrypt: Do not add/remove devices in s/r callbacksFelix Beck1-11/+29
Devices are no longer removed or added in the suspend and resume callbacks. Instead they are marked unregistered in suspend. In the resume callback the ap_scan_bus method is scheduled. The bus scan function will remove the old device and add new ones. This way all the device handling will be done in only one function. Additionaly the case where the domain might change during suspend/resume is caught. In that case the devices qid needs to re-calculated in order of having it found by the scan method. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] zcrypt: Free ap_device if dev_set_name fails.Felix Beck1-2/+5
If dev_set_name fails during scanning the AP bus, the reserved memory has to be freed. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] zcrypt: Use spin_lock_bh in suspend callbackFelix Beck1-2/+6
Fix lock dependency warning. inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. bash/1442 [HC0[0]:SC0[0]:HE1:SE1] takes: (&ap_dev->lock){+.?...}, at: [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] {IN-SOFTIRQ-W} state was registered at: [<000000000017f094>] __lock_acquire+0xb78/0x182c [<000000000017fe8e>] lock_acquire+0x146/0x178 [<0000000000549cf2>] _spin_lock+0x5a/0x98 [<000003e001280404>] __ap_poll_device+0x40/0x3e8 [ap] [<000003e001280afe>] ap_poll_all+0xaa/0x1a4 [ap] [<000000000014fa82>] tasklet_action+0xfe/0x1f4 [<0000000000150a56>] __do_softirq+0x116/0x284 [<0000000000111058>] do_softirq+0xe4/0xe8 [<00000000001504ba>] irq_exit+0xba/0xd8 [<00000000003dd04a>] do_IRQ+0x176/0x1fc [<000000000011823c>] io_return+0x0/0x8 [<0000004bfbfd2c0e>] 0x4bfbfd2c0e Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] proper use of device registerSebastian Ott1-1/+1
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-24[S390] zcrypt: fix scheduling of hrtimer ap_poll_timerFelix Beck1-2/+7
Every time a request is enqueued or there is some work outstanding from the ap_tasklet, the ap_poll_timer is scheduled again. Unfortunately it was permanently called. It looked as if it was started in the past and thus imediately expired. This has been changed. First it is checked if the hrtimer is already expired. Then the expiring time is forwarded and the timer restarted. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] ap/zcrypt: Suspend/Resume ap bus and zcryptFelix Beck1-2/+83
Add Suspend/Resume support to ap bus and zcrypt. All enhancements are done in the ap bus. No changes in the crypto card specific part are necessary. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26[S390] use kzfree()Johannes Weiner1-2/+1
Use kzfree() instead of memset() + kfree(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26[S390] list usage cleanup in s390Eric Sesterhenn1-4/+2
Trivial cleanup, list_del(); list_add{,_tail}() is equivalent to list_move{,_tail}(). Semantic patch for coccinelle can be found at www.cccmz.de/~snakebyte/list_move_tail.spatch Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-06s390: remove s390_root_dev_*()Mark McLoughlin1-4/+3
Replace s390_root_dev_register() with root_device_register() etc. [Includes fix from Cornelia Huck] Signed-off-by: Mark McLoughlin <markmc@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-25[S390] convert ap_bus printks to pr_xxx macros.Martin Schwidefsky1-3/+7
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] drivers/s390/crypto: Move dereference to after IS_ERR testJulia Lawall4-12/+28
If reply is ERR_PTR(...), then it should not be dereferenced, so I have moved the dereference from the declaration to after the IS_ERR test. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; identifier fld; position p1,p2; @@ ( x = E; | x = E | x@p1->fld ... when != x = E IS_ERR(x@p2) ... when any ) @other_match exists@ expression match.x, E1, E2; position match.p1,match.p2; @@ x = E1 ... when != x = E2 when != x@p1 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "* file %s dereference %s test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] ap: Minor code beautification.Christian Maaser1-14/+14
Changed some symbol names for a better and clearer code. Signed-off-by: Christian Maaser <cmaaser@de.ibm.com> Signed-off-by: Felix Beck <beckf@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] zcrypt: Use of Thin InterruptsFelix Beck2-4/+176
When the machine supports AP adapter interrupts polling will be switched off at module initialization and the driver will work in interrupt mode. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-17Merge commit 'linus/master' into merge-linusArjan van de Ven1-2/+2
Conflicts: arch/x86/kvm/i8254.c
2008-10-10[S390] bus_id -> dev_set_name() changesCornelia Huck1-2/+2
Convert most s390 users setting bus_id to dev_set_name(). css and ccw busses are deferred since they need some special treatment. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-05hrtimer: convert s390 to the new hrtimer apisArjan van de Ven1-3/+3
In order to be able to do range hrtimers we need to use accessor functions to the "expire" member of the hrtimer struct. This patch converts s390 to these accessors. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-07-14Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds1-0/+3
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits) IB/umad: BKL is not needed for ib_umad_open() IB/uverbs: BKL is not needed for ib_uverbs_open() bf561-coreb: BKL unneeded for open() Call fasync() functions without the BKL snd/PCM: fasync BKL pushdown ipmi: fasync BKL pushdown ecryptfs: fasync BKL pushdown Bluetooth VHCI: fasync BKL pushdown tty_io: fasync BKL pushdown tun: fasync BKL pushdown i2o: fasync BKL pushdown mpt: fasync BKL pushdown Remove BKL from remote_llseek v2 Make FAT users happier by not deadlocking x86-mce: BKL pushdown vmwatchdog: BKL pushdown vmcp: BKL pushdown via-pmu: BKL pushdown uml-random: BKL pushdown uml-mmapper: BKL pushdown ...
2008-07-14[S390] Cleanup zcrypt printk messages.Felix Beck7-130/+17
Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] zcrypt: Add additional card IDs to CEX2C and CEX2ARalph Wuerthner3-0/+4
Add support for new micro code load of CEX2C and CEX2A adapters, which uses different IDs. This patch just adds the IDs to the existing drivers. Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] ap: Use high-resolution timer for pollingFelix Beck1-10/+53
The ap poll mechanism is converted to use a high-resolution timer for polling. This allows more specific polling. With this a new sysfs attribute is introduced to specify the polling rate in nanoseconds. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-06-20crypto-zcrypt_api: BKL pushdownArnd Bergmann1-0/+3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-04-17[S390] zcrypt: Comments and kernel-doc cleanupFelix Beck7-95/+184
Comments, which suggested to be kernel-doc but were not in the right formatting, have been corrected. Additionally some minor cleanup in the comments has been done. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] replace remaining __FUNCTION__ occurrencesHarvey Harrison1-4/+4
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] zcrypt: add support for large random numbersRalph Wuerthner3-1/+326
This patch allows user space applications to access large amounts of truly random data. The random data source is the build-in hardware random number generator on the CEX2C cards. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-03-05[S390] zcrypt: fix ap_device_list handlingRalph Wuerthner1-5/+7
In ap_device_probe() we can add the new ap device to the internal device list only if the device probe function successfully returns. Otherwise we might end up with an invalid device in the internal ap device list. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] zcrypt: Do not start ap poll thread per defaultFelix Beck1-2/+2
Do not start ap poll thread per default to increase perfomance with z/VM. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds1-10/+4
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers1-10/+4
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12[S390] zcrypt: fix PCIXCC/CEX2C error recoveryRalph Wuerthner1-2/+5
Symptom: zcrypt fails by setting all PCIXCC/CEX2C cards offline for a certain type of invalid keys. Problem: zcrypt does not handle rc=12/rs=769 request responses correctly Solution: modify convert_type86_ica() to handle these error codes correctly Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] zcrypt: fix ap_reset_domain()Ralph Wuerthner1-2/+3
Resetting of a all queues within a domain requires that a domain must be selected first. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] zcrypt: remove duplicated struct CPRBX definitionRalph Wuerthner2-46/+1
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
2007-10-12[S390] zcrypt: make init/exit functions static.Heiko Carstens1-2/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcrypt: fix request timeout handlingRalph Wuerthner6-90/+140
Under very high load zcrypt requests may timeout while waiting on the request queue. Modify zcrypt that timeouts are based on crypto adapter responses. A timeout occurs only if a crypto adapter does not respond within a given time frame to sumitted requests. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27uevent: use add_uevent_var() instead of open coding itEric Rannaud1-15/+13
Make use of add_uevent_var() instead of (often incorrectly) open coding it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Eric Rannaud <eric.rannaud@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26[S390] zcrypt: Fix ap_poll_requests counter in lost requests error path.Ralph Wuerthner1-0/+4
In the unlikely event that an AP device lost requests, don't forget to update the ap_poll_requests counter too. Same must happen in case an AP device is removed while there are still outstanding requests. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.