aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17s390/qeth: don't keep statistics for tx timeoutJulian Wiedmann2-3/+0
struct netdev_queue contains a counter for tx timeouts, which gets updated by dev_watchdog(). So let's not attempt to maintain our own statistics, in particular not by overloading the skb-error counter. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17s390/qeth: don't bother updating the last-tx timeJulian Wiedmann1-1/+0
As the documentation for netif_trans_update() says, netdev_start_xmit() already updates the last-tx time after every good xmit. So don't duplicate that effort. One odd case is that qeth_flush_buffers() also gets called from our TX completion handler, to flush out any partially filled buffer when we switch the queue to non-packing mode. But as the TX completion handler will _always_ wake the txq, we don't have to worry about the TX watchdog there. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17s390/qeth: handle error from qeth_update_from_chp_desc()Julian Wiedmann1-4/+10
Subsequent code relies on the values that qeth_update_from_chp_desc() reads from the CHP descriptor. Rather than dealing with weird errors later on, just handle it properly here. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17s390/qeth: clarify naming for some QDIO helpersJulian Wiedmann4-23/+22
The naming of several QDIO helpers doesn't match their actual functionality, or the structures they operate on. Clean this up. s/qeth_alloc_qdio_buffers/qeth_alloc_qdio_queues s/qeth_free_qdio_buffers/qeth_free_qdio_queues s/qeth_alloc_qdio_out_buf/qeth_alloc_output_queue s/qeth_clear_outq_buffers/qeth_drain_output_queue s/qeth_clear_qdio_buffers/qeth_drain_output_queues Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: send IDX cmds via qeth_send_control_data()Julian Wiedmann2-212/+206
This converts the IDX code to use qeth_send_control_data(), replacing a bunch of duplicated IO code and unbounded waits. It also allows the IDX sequence to benefit from the improved timeout & notify infrastructure, so that we can eliminate the DOWN -> ACTIVATING -> UP transition in the channel state machine. The patch looks rather big, but most of it is a straight-forward conversion of the old IDX cmd setup & callbacks to the new model. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: use callback to finalize cmdJulian Wiedmann3-31/+50
To avoid concurrency issues, some parts of the cmd setup are delayed until qeth_send_control_data() holds the IO channel's irq_pending "lock". Rather than hard-coding those setup steps for each cmd type, have the cmd provide a callback. This will make it easier to also issue IDX commands via qeth_send_control_data(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: let qeth_notify_reply() set the notify reasonJulian Wiedmann1-14/+8
As trivial cleanup before adding more users to qeth_notify_reply(), move the setup of reply->rc from the caller into the helper. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: clarify default cmd callbackJulian Wiedmann1-8/+9
Current code makes it look like qeth_send_control_data_cb() is some sort of default callback for all cmds. But in practice, it is only used for half of the cmd buffers we issue. Reduce the confusion by only setting this callback for cmds that actually want it, and while at it give the callback a name that matches the established naming scheme. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: don't poll for cmd IO completionJulian Wiedmann3-41/+35
All callers are running in process context now, so we can safely sleep in qeth_send_control_data() while waiting for a cmd to complete. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: convert IP table spinlock to mutexJulian Wiedmann4-29/+28
All users of the lock are running in process context now. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: defer IPv6 address notifier eventsJulian Wiedmann3-7/+57
The inet6addr_chain is atomic. So instead of starting the cmd IO for SETIP / DELIP straight from the notifier callback, run it from a workqueue. This is the last step towards removal of cmd IO completion polling. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: add wrapper for IP table accessJulian Wiedmann1-16/+17
Extract a little helper, so that high-level callers can manipulate the IP table without worrying about the locking. This will make it easier to convert the code to a different locking primitive later on. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: remove locking for RX modeset cacheJulian Wiedmann4-14/+0
The L2 and L3 .ndo_set_rx_mode callbacks maintain an address cache to decide which addresses have changed since the last modeset. When the card is set offline, qeth_l?_stop_card() drains this cache. This happens only after 1) the net_device has been detached, and 2) any pending RX modeset has completed. Consequently we can access the cache lock-free. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28s390/qeth: defer RX modesettingJulian Wiedmann3-17/+48
.ndo_set_rx_mode gets called in process context, but while holding the addr_list spinlock. Which means we currently can't sleep while re-programming the HW, and need to poll for IO completion. That's bad, in particular since receiving the cmd response can fail silently and we're then polling until the timeout hits. As a first step towards eliminating the IO completion polling, run the RX modeset from a work element and only take the addr_list lock while updating the RX mode address cache. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: be drop monitor friendlyJulian Wiedmann3-5/+6
As part of the TX completion path, qeth_release_skbs() frees the completed skbs with __skb_queue_purge(). This ends in kfree_skb(), reporting every completed skb as dropped. On the other hand when dropping an skb in .ndo_start_xmit, we end up calling consume_skb()... where we should be using kfree_skb() so that drop monitors get notified. Switch the drop/consume logic around, and also don't accumulate dropped packets in the tx_errors statistics. Fixes: dc149e3764d8 ("s390/qeth: replace open-coded skb_queue_walk()") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: fix race when initializing the IP address tableJulian Wiedmann1-1/+3
The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: don't erase configuration while probingJulian Wiedmann2-3/+2
The HW trap and VNICC configuration is exposed via sysfs, and may have already been modified when qeth_l?_probe_device() attempts to initialize them. So (1) initialize the VNICC values a little earlier, and (2) don't bother about the HW trap mode, it was already initialized before. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05Merge tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-5/+11
Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
2019-02-28s390/qeth: drop redundant state checkingJulian Wiedmann5-43/+13
Now that qeth always uses dev_close() to shutdown the interface, we can trust the locking and remove some custom state checks. qeth_l?_stop_card() is no longer called for a card in UP state, so remove the checks there too. This basically makes the UP state obsolete, so rip out the whole thing (except for the sysfs-visible string). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't special-case HW trap during suspendJulian Wiedmann2-12/+4
It makes no difference whether we 1. manually disarm the HW trap and call the offline code with recovery_mode == 1, or 2. call the offline code with recovery_mode == 0, and let it disarm the HW trap for us. So consolidate the two code paths in the suspend callback. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove driver-wide workqueueJulian Wiedmann1-18/+1
The qeth-wide workqueue is now only used by a single caller to schedule close_dev work. Just put it on a system queue instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't defer close_dev work during recoveryJulian Wiedmann4-5/+3
The recovery code already runs in a kthread, we don't have to defer the offlining further. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove a redundant check for card->devJulian Wiedmann1-1/+1
smatch complains that __qeth_l3_set_offline() first accesses card->dev, and then later checks whether the pointer is valid. Since commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), the pointer is _always_ valid - that patch merely missed to remove this one check. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: call dev_close() during recoveryJulian Wiedmann3-75/+20
When resetting an interface ("recovery"), qeth currently attempts to elide the call to dev_close(). We initially only call .ndo_close to quiesce the data path, and then offline & online the ccwgroup device. If the reset succeeded, a call to .ndo_open then resumes the data path along with some internal setup (dev_addr validation, RX modeset) that dev_open() would have usually triggered. dev_close() only gets called (via the close_dev worker) if the reset action fails. It's unclear whether this was initially done due to locking concerns, or rather to execute the reset transparently. Either way, temporarily closing the interface without dev_close() is fragile, and means we're susceptible to various races and unexpected behaviour. For instance: - Bypassing dev_deactivate_many() means that the qdiscs are not set to __QDISC_STATE_DEACTIVATED. Consequently any intermittent TX completion can wake up the txq, resulting in calls to .ndo_start_xmit while the data path is down. We have custom state checking to detect this case and drop such packets. - Because the IFF_UP flag doesn't reflect the interface's actual state during a reset, we have custom state checking in .ndo_open and .ndo_close to guard against invalid calls. - Considering that the reset might take a considerable amount of time (in particular if an IO fails and we end up waiting for its timeout), we _do_ want NETDEV_GOING_DOWN and NETDEV_DOWN events so that components like bonding, team, bridge, macvlan, vlan, ... can take appropriate action. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: unconditionally clear MAC_REGISTERED flagJulian Wiedmann2-2/+1
In its attempt to run only the minimal amount of tear down steps, qeth_l2_stop_card() fails to reset the "is dev_addr registered?" flag in some rare scenarios. But a future change to the tear down sequence would cause us to _always_ hit this issue, so patch it up before that code lands. Fix it by unconditionally clearing the flag bit. This also allows us to remove the additional cleanup step in qeth_dev_layer2_store(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: enable/disable the HW trap a little earlierJulian Wiedmann2-14/+17
When setting a L2 qeth device online, enable the HW trap as soon as the control plane is available. This allows us to catch any error that occurs during the very first commands. In the same spirit, the offline code should disable the HW trap as the very first step of its processing. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove RECOVER stateJulian Wiedmann6-47/+25
The offline code uses a specific RECOVER state to indicate that the interface should be brought up when a qeth device is set online again. Rather than having a specific card-state for this, just put it in an internal flag bit and set the state to DOWN. When working with the card's state transitions, this reduces the complexity quite a bit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20s390/ism: ignore some errors during deregistrationSebastian Ott1-3/+9
Prior to dma unmap/free operations the ism driver tries to ensure that the memory is no longer accessed by the HW. When errors during deregistration of memory regions from the HW occur the ism driver will not unmap/free this memory. When we receive notification from the hypervisor that a PCI function has been detached we can no longer access the device and would never unmap/free these memory regions which led to complaints by the DMA debug API. Treat this kind of errors during the deregistration of memory regions from the HW as success since it is already ensured that the memory is no longer accessed by HW. Reported-by: Karsten Graul <kgraul@linux.ibm.com> Reported-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-15s390/qeth: split out OSN netdev opsJulian Wiedmann3-15/+21
Rather than special-casing OSN in a number of places, just give this device type its own netdev_ops structure. When setting up the OSN net_device, also skip the handling of the various HW offloads (eg TSO). The device shouldn't be advertising any of them, and the OSN code paths in qeth don't have support for them. In particular RX VLAN filtering is not supported, so don't hook up those callbacks in the netdev_ops. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: add support for ETHTOOL_GRINGPARAMJulian Wiedmann1-0/+17
Implement a trivial callback that exposes the queue sizes. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: overhaul ethtool statisticsJulian Wiedmann6-216/+256
Accumulate per-TX queue statistics, and increase their size to 64 bit. Don't bother with enabling/disabling the statistics, the overhead is negligible. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: move ethtool code into its own fileJulian Wiedmann6-351/+346
Most of this is self-contained code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: reduce ethtool statisticsJulian Wiedmann4-123/+7
Counting the number of function calls and the time spent in functions is best left to proper tracing facilities. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: use a static Output Queue arrayJulian Wiedmann2-16/+7
qeth dynamically allocates an array for storing pointers to its Output Queue structures. Switch this to a static array - we are currently limited to 4 Output Queues, so shrinking the qeth_qdio_info struct by just a few bytes doesn't justify the additional complexity. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: allow manual recovery when device is SOFTSETUPJulian Wiedmann1-1/+1
Once a qeth ccwgroup device is set online, it's also armed for internal recovery. So allow for testing that code path via sysfs, regardless of whether the interface is up or down. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: convert remaining legacy cmd callbacksJulian Wiedmann3-103/+121
This calls the existing errno translation helpers from the callbacks, adding trivial wrappers where necessary. For cmds that have no sophisticated errno translation, default to -EIO. For IPA cmds with no callback, fall back to a minimal default. This is currently being used by qeth_l3_send_setrouting(). Thus having all converted all callbacks, remove the legacy path in qeth_send_control_data_cb(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: convert bridgeport callbacksJulian Wiedmann1-54/+40
By letting the callbacks deal with error translation, we no longer need to pass the raw error codes back to the originator. This allows us to slim down the callback's private data, and nicely simplifies the code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: allow cmd callbacks to return errnosJulian Wiedmann6-64/+76
Error propagation from cmd callbacks currently works in a way where qeth_send_control_data_cb() picks the raw HW code from the response, and the cmd's originator later translates this into an errno. The callback itself only returns 0 ("done") or 1 ("expect more data"). This is 1. limiting, as the only means for the callback to report an internal error is to invent pseudo HW codes (such as IPA_RC_ENOMEM), that the originator then needs to understand. For non-IPA callbacks, we even provide a separate field in the IO buffer metadata (iob->rc) so the callback can pass back a return value. 2. fragile, as the originator must take care to not translate any errno that is returned by qeth's own IO code paths (eg -ENOMEM). Also, any originator that forgets to translate the HW codes potentially passes garbage back to its caller. For instance, see commit 2aa4867198c2 ("s390/qeth: translate SETVLAN/DELVLAN errors"). Introduce a new model where all HW error translation is done within the callback, and the callback returns > 0, if it expects more data (as before) == 0, on success < 0, with an errno Start off with converting all callbacks to the new model that either a) pass back pseudo HW codes, or b) have a dependency on a specific HW error code. Also convert c) the one callback that uses iob->rc, and d) qeth_setadpparms_change_macaddr_cb() so that it can pass back an error back to qeth_l2_request_initial_mac() even when the cmd itself was successful. The old model remains supported: if the callback returns 0, we still propagate the response's HW error code back to the originator. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: cancel cmd on early errorJulian Wiedmann2-9/+29
When sending cmds via qeth_send_control_data(), qeth puts the request on the IO channel and then blocks on the reply object until the response has been received. If the IO completes with error, there will never be a response and we block until the reply-wait hits its timeout. For this case, connect the request buffer to its reply object, so that we can immediately cancel the wait. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: simplify reply object handlingJulian Wiedmann1-57/+61
Current code enqueues & dequeues a reply object from the waiter list in various places. In particular, the dequeue & enqueue in qeth_send_control_data_cb() looks fragile - this can cause qeth_clear_ipacmd_list() to skip the active object. Add some helpers, and boil the logic down by giving qeth_send_control_data() the sole responsibility to add and remove objects. qeth_send_control_data_cb() and qeth_clear_ipacmd_list() will now only notify the reply object to interrupt its wait cycle. This can cause a slight delay in the removal, but that's no concern. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: limit trace to valid data of command requestJulian Wiedmann1-1/+1
'len' specifies how much data we send to the HW, don't dump beyond this boundary. As of today this is no big concern - commands are built in full, zeroed pages. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: align csum offload with TSO control logicJulian Wiedmann2-89/+47
csum offload and TSO have similar programming requirements. The TSO code was reworked with commit "s390/qeth: enhance TSO control sequence", adjust the csum control flow accordingly. Primarily this means replacing custom helpers with more generic infrastructure. Also, change the LP2LP check so that it warns on TX offload (not RX). This is where reduced csum capability actually matters. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: enable only required csum offload featuresJulian Wiedmann1-2/+9
Current code attempts to enable all advertised HW csum offload features. Future-proof this by enabling only those features that we actually use. Also, the IPv4 header csum feature is only needed for TX on L3 devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: consolidate filling of low-level cmd length fieldsJulian Wiedmann5-56/+28
The code to fill the IPA length fields is duplicated three times across the driver: 1. qeth_send_ipa_cmd() sets IPA_CMD_LENGTH, which matches the defaults in the IPA_PDU_HEADER template. 2. for OSN, qeth_osn_send_ipa_cmd() bypasses this logic and inserts the length passed by the caller. 3. SNMP commands (that can outgrow IPA_CMD_LENGTH) have their own way of setting the length fields, via qeth_send_ipa_snmp_cmd(). Consolidate this into qeth_prepare_ipa_cmd(), which all originators of IPA cmds already call during setup of their cmd. Let qeth_send_ipa_cmd() pull the length from the cmd instead of hard-coding IPA_CMD_LENGTH. For now, the SNMP code still needs to fix-up its length fields manually. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: reduce data length for ARP cache queryJulian Wiedmann4-18/+7
qeth_l3_query_arp_cache_info() indicates a data length that's much larger than the actual length of its request (ie. the value passed to qeth_get_setassparms_cmd()). The confusion presumably comes from the fact that the cmd _response_ can be quite large - but that's no concern for the initial request IO. Fixing this up allows us to use the generic qeth_send_ipa_cmd() infrastructure. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-14/+31
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07s390/qdio: make SBAL address array type-safeJulian Wiedmann1-2/+2
There is no need to use void pointers, all drivers are in agreement about the underlying data structure of the SBAL arrays. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-04s390/qeth: conclude all event processing before offlining a cardJulian Wiedmann4-5/+15
Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: cancel close_dev work before removing a cardJulian Wiedmann3-0/+4
A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: fix use-after-free in error pathJulian Wiedmann1-9/+6
The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.