aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390/net (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-09-21qeth: add layer 2 RX/TX checksum offloadingThomas Richter4-147/+285
Checksum offloading for send and receive is already supported for layer 3 (IP layer). This patch adds support for RX and TX hardware checksum offloading for layer 2 (MAC layer). The hardware calculates the checksum for IP UDP and TCP packets. This patch moves the hardware checksum offloading setup to the set of common functions in qeth_core_main.c. Layer 2 and layer 3 now simply call the same common functions. Also note that TX checksum offloading is always enabled. The device driver relies on the TCP/IP stack to make use of this feature. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: move OSA portname into deprecated statusUrsula Braun3-97/+11
An OSA-Express port name was required to identify a shared OSA port. All operating system instances that shared the port had to use the same port name. This requirement no longer applies. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: no write permission for readonly sysattrLakhvich Dmitriy1-1/+1
User is not allowed to write into bridge_state sysfs file. Fixed attribute not mislead the user Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21qeth: remove extraneous length from %pM formatEugene Crosser1-2/+2
Length specifier in the %pM format is not supported (at least, not documented). Remove it, and also an extraneous '&' for the array. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07s390: remove unneeded variablesPeter Senna Tschudin2-8/+2
This patch remove unneeded variables used to store return values. These issues were detected with the Coccinelle script: scripts/coccinelle/misc/returnvar.cocci [heiko.carstens@de.ibm.com]: make qeth_l[2/3]_stop() return void Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-18s390/lcs: Fix null-pointer access in msgPeter Oberparleiter1-1/+1
An attempt to configure a CTC device as LCS results in the following error message: (null): Detecting a network adapter for LCS devices failed with rc=-5 (0xfffffffb) "(null)" results from access to &card->dev->dev in lcs_new_device() which is only initialized later in the function. Fix this by using &ccwgdev->dev instead which is initialized before lcs_new_device() is called. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: replace ENOSYS with EOPNOTSUPPEugene Crosser1-5/+5
Since recently, `checkpatch.pl` advices that ENOSYS should not be used for anything other than "invalid syscall nr". This patch replaces ENOSYS return code with EOPNOTSUPP for the "unsupported function" conditions. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: BRIDGEPORT "sanity check"Eugene Crosser1-4/+12
Forbid enabling IFF_PROMISC reflection to BRIDGEPORT when a role is already assigned, and forbid direct manipulation of the role when reflection mode is engaged. Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: OSA version of SETBRIDGEPORT commandEugene Crosser4-28/+49
OSA Ethernet hardware is introducing BRIDGEPORT functionality similar (but not identical) to HiperSockets BRIDGEPORT. This patch makes HiperSockets BRIDGEPORT related sysfs attributes and udev events work with OSA hardware too. Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: IFF_PROMISC flag to BRIDGE PORT modeEugene Crosser3-3/+95
OSA and HiperSocket devices do not support promiscuous mode proper, but they support "BRIDGE PORT" mode that is functionally similar. This update introduces sysfs attribute that, when set, makes the driver try to "reflect" setting and resetting of the IFF_PROMISC flag on the interface into setting and resetting PRIMARY or SECONDARY bridge port role on the underlying OSA or HiperSocket device. Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: remove locks from sysfs _showEugene Crosser1-8/+0
Locking is probably unnecessary in this case, and the rest of the qeth sysfs code does not use locks in the *_show() functions. Remove locks from the layer2 *_show() functions in which they where accidentally introduced. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: fix handling of IPA return codesEugene Crosser1-6/+4
Function that executes IPA commands returns the result code from the IPA response block. If non-negative, it needs to be transformed into errno-compatible code before returning to the caller. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-18qeth: fix rx checksum offload handlingThomas Richter1-7/+2
ethtool is used to change some device driver features such as RX/TX hardware checksum offloading. The qeth device driver callback function to turn on/off RX hardware check sum handling never changes the hardware configuration. The NETIF_F_RXCSUM bit is cleared when the feature bitset type netdev_features_t(64bit) is assigned to 32 a bit variable. This patch fixes the NETIF_F_RXCSUM handling. Also there is no need to manipulate the device's features bit set as this is done by the caller when no error occurs. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-3740/+4
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
2015-03-25s390: remove 31 bit supportHeiko Carstens1-12/+0
Remove the 31 bit support in order to reduce maintenance cost and effectively remove dead code. Since a couple of years there is no distribution left that comes with a 31 bit kernel. The 31 bit kernel also has been broken since more than a year before anybody noticed. In addition I added a removal warning to the kernel shown at ipl for 5 minutes: a960062e5826 ("s390: add 31 bit warning message") which let everybody know about the plan to remove 31 bit code. We didn't get any response. Given that the last 31 bit only machine was introduced in 1999 let's remove the code. Anybody with 31 bit user space code can still use the compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-28qeth: Fix command sizesStefan Raspl1-2/+3
This patch adjusts two instances where we were using the (too big) struct qeth_ipacmd_setadpparms size instead of the commands' actual size. This didn't do any harm, but wasted a few bytes. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28s390: remove claw driverUrsula Braun4-3738/+1
claw devices are outdated and no longer supported. This patch removes the claw driver. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-139/+248
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25390/qeth: Fix locking warning during qeth device setupThomas Richter3-34/+132
Do not wait for channel command buffers in IPA commands. The potential wait could be done while holding a spin lock and causes in recent kernels such a bug if kernel lock debugging is enabled: kernel: BUG: sleeping function called from invalid context at drivers/s390/net/qeth_core_main.c: 794 kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 2031, name: NetworkManager kernel: 2 locks held by NetworkManager/2031: kernel: #0: (rtnl_mutex){+.+.+.}, at: [<00000000006e0d7a>] rtnetlink_rcv+0x32/0x50 kernel: #1: (_xmit_ETHER){+.....}, at: [<00000000006cfe90>] dev_set_rx_mode+0x30/0x50 kernel: CPU: 0 PID: 2031 Comm: NetworkManager Not tainted 3.18.0-rc5-next-20141124 #1 kernel: 00000000275fb1f0 00000000275fb280 0000000000000002 0000000000000000 00000000275fb320 00000000275fb298 00000000275fb298 00000000007e326a 0000000000000000 000000000099ce2c 00000000009b4988 000000000000000b 00000000275fb2e0 00000000275fb280 0000000000000000 0000000000000000 0000000000000000 00000000001129c8 00000000275fb280 00000000275fb2e0 kernel: Call Trace: kernel: ([<00000000001128b0>] show_trace+0xf8/0x158) kernel: [<000000000011297a>] show_stack+0x6a/0xe8 kernel: [<00000000007e995a>] dump_stack+0x82/0xb0 kernel: [<000000000017d668>] ___might_sleep+0x170/0x228 kernel: [<000003ff80026f0e>] qeth_wait_for_buffer+0x36/0xd0 [qeth] kernel: [<000003ff80026fe2>] qeth_get_ipacmd_buffer+0x3a/0xc0 [qeth] kernel: [<000003ff80105078>] qeth_l3_send_setdelmc+0x58/0xf8 [qeth_l3] kernel: [<000003ff8010b1fe>] qeth_l3_set_ip_addr_list+0x2c6/0x848 [qeth_l3] kernel: [<000003ff8010bbb4>] qeth_l3_set_multicast_list+0x434/0xc48 [qeth_l3] kernel: [<00000000006cfe9a>] dev_set_rx_mode+0x3a/0x50 kernel: [<00000000006cff90>] __dev_open+0xe0/0x140 kernel: [<00000000006d02a0>] __dev_change_flags+0xa0/0x178 kernel: [<00000000006d03a8>] dev_change_flags+0x30/0x70 kernel: [<00000000006e14ee>] do_setlink+0x346/0x9a0 ... The device driver has plenty of command buffers available per channel for channel command communication. In the extremely rare case when there is no command buffer available, return a NULL pointer and issue a warning in the kernel log. The caller handles the case when a NULL pointer is encountered and returns an error. In the case the wait for command buffer is possible (because no lock is held as in the OSN case), still wait until a channel command buffer is available. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25qeth: clean up error handlingEugene Crosser2-106/+117
In the functions that are registering and unregistering MAC addresses in the qeth-handled hardware, remove callback functions that are unnesessary, as only the return code is analyzed. Translate hardware response codes to semi-standard 'errno'-like codes for readability. Add kernel-doc description to the internal API function qeth_send_control_data(). Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17qeth: Remove unneeded structure memberThomas Richter1-1/+0
The member irq_tasklet in the qeth_channel structure is not referenced anymore and is removed from the structure. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17qeth: sysfs: replace strcmp() with sysfs_streq()Eugene Crosser2-48/+32
Replace combination of strsep() and a temporary char * followed by a series of "if (!strcmp(...))" with a series of "if (sysfs_streq(...))". Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17qeth: use qeth_card_hw_is_reachable() everywhereEugene Crosser4-15/+8
qeth_card_hw_is_reachable() was introduced as part of a new functionality, but it is a useful abstraction that can replace verbose checks througout the rest of the `qeth` driver. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Thomas-Mich Richter <tmricht@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17s390/net: Delete useless checks before function callsMarkus Elfring3-14/+7
The function debug_unregister() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17s390/ctcm, netiucv: migrate variables to handle y2038 problemAya Mahfouz5-19/+15
This patch is concerned with migrating the time variables for the s390 network drivers. The changes handle the y2038 problem where timespec will overflow in the year 2038. timespec was replaced by unsigned long and all time variables get their values from the jiffies global variable. This was done for the sake of speed and efficiency. Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-4/+4
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26ctcm: replace sscanf by kstrto functionThomas Richter1-4/+4
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26lcs: replace sscanf by kstrto functionThomas Richter1-5/+6
Since a single integer value is read from the supplied buffer use the kstrto functions instead of sscanf. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: s390 ethernet device driver dependencyThomas Richter1-1/+1
Compile the s390 10GB ethernet device driver only when ETHERNET has been defined in the kernel configuration file. Right now the qeth device driver is always built regardless of which network connectivity is active. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: make local functions static in qeth_l3 moduleThomas Richter2-8/+4
This patch makes 4 local functions static and removes the prototypes from the header file. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: fix some trace formating issuesThomas Richter3-5/+5
This patch fixes trace formatting issues using the QETH_CARD_TEXT_ macro. The total size of each trace entry is 8 bytes. Some of the sprintf formats exceed these 8 bytes (for example using abcd:%d and the converted value needs more than 3 bytes). The solution is to shorten the text prepending the value or use a different format (%x). Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-26qeth: qeth_core_main make local functions staticThomas Richter2-19/+15
This patch makes some global functions static and removes the prototypes from the header file. Also function qeth_query_card_info is not exported anymore, there is no external user for it, this function should never have been exported in the first place. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-13Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+0
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+1
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule()Kirill Tkhai1-2/+0
schedule(), io_schedule() and schedule_timeout() always return with TASK_RUNNING state set, so one more setting is unnecessary. (All places in patch are visible good, only exception is kiblnd_scheduler() from: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c Its schedule() is one line above standard 3 lines of unified diff) No places where set_current_state() is used for mb(). Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai Cc: Alasdair Kergon <agk@redhat.com> Cc: Anil Belur <askb23@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: David Howells <dhowells@redhat.com> Cc: Dmitry Eremin <dmitry.eremin@intel.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Isaac Huang <he.huang@intel.com> Cc: James E.J. Bottomley <JBottomley@parallels.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liang Zhen <liang.zhen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Masaru Nomura <massa.nomura@gmail.com> Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleg Drokin <green@linuxhacker.ru> Cc: Peng Tao <bergwolf@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Robert Love <robert.w.love@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Zi Shen Lim <zlim.lnx@gmail.com> Cc: devel@driverdev.osuosl.org Cc: dm-devel@redhat.com Cc: dri-devel@lists.freedesktop.org Cc: fcoe-devel@open-fcoe.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-afs@lists.infradead.org Cc: linux-cris-kernel@axis.com Cc: linux-kernel@vger.kernel.org Cc: linux-nfs@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: qla2xxx-upstream@qlogic.com Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-02qeth: don't query for info if hardware not ready.Eugene Crosser3-7/+17
When qeth device is queried for ethtool data, hardware operation is performed to extract the necessary information from the card. If the card is not online at the moment (e.g. it is undergoing recovery), this operation produces undesired effects like temporarily freezing the system. This patch prevents execution of the hardware query operation when the card is not online. In such case, ioctl() operation returns error with errno ENODEV. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-68/+101
Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
2014-07-22s390/qeth: extract qdio buffers from output buffer structSebastian Ott2-37/+58
Because of the embedded qdio_buffer array struct qeth_qdio_out_q is quite large resulting in an order 4 allocation. This is likely to fail at runtime and wastes a lot of memory since the actual size is just about 34K. Since there is no need for this buffer to be contiguous split it up using qdio buffer helpers. Reported-by: Neale Ferguson <neale@sinenomine.net> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qeth: extract qdio buffers from input buffer structSebastian Ott2-8/+17
Because of the embedded qdio_buffer array struct qeth_qdio_q is quite large resulting in an order 4 allocation. This is likely to fail at runtime and wastes a lot of memory since the actual size is just about 36K. Since there is no need for this buffer to be contiguous split it up using qdio buffer helpers. Reported-by: Neale Ferguson <neale@sinenomine.net> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/qeth: qdio queue helpersSebastian Ott1-25/+28
Get rid of duplicated code by introducing some helpers to allocate and free qdio queues used by qeth for its input and completion queue. No functional change. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-21qeth: Display adjacent switch attributesStefan Raspl4-1/+100
Add support to display the adjacent switch port's forwarding attributes. Currently supports info on forwarding modes '802.1' and 'rr' (reflective relay). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen5-7/+12
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds9-76/+124
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-06net: use ethtool_cmd_speed_set helper to set ethtool speed valueJiri Pirko1-8/+11
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30s390/net: fix format string mismatchesUrsula Braun3-10/+19
cppcheck blamed some issues in drivers/s390/net/... They are fixed here. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30qeth: Fix for possible null pointer dereferenceRickard Strandqvist1-2/+2
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-20s390/cio: fix multiple structure definitionsSebastian Ott1-10/+2
Fix multiple definitions of struct channel_path_desc by moving it to asm/chpid.h . Also change ccw_device_get_chp_desc to use proper types. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe2-5/+4
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()dingtianhong1-5/+5
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28ctc: replace PTR_RET with PTR_ERR_OR_ZEROFrank Blaschka1-1/+1
PTR_RET is deprecated. Do not recommend its usage anymore. Use PTR_ERR_OR_ZERO instead. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.