aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390 (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2010-08-17enic: Check if rq/wq buf not NULL before freeing themRoopa Prabhu2-4/+8
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Clean up: remove enic_dev_stats_clearRoopa Prabhu1-15/+0
Remove function enic_dev_stats_clear and its reference in enic device init code. Firmware clears device stats on device open. So, no need for the driver to do it again. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Use offsetof macro in vic tlv length calculationRoopa Prabhu1-3/+4
Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Add new firmware devcmdsRoopa Prabhu1-0/+12
Add new firmware devcmds: CMD_PROXY_BY_INDEX, CMD_CONFIG_INFO_GET Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Add support for firmware management deviceRoopa Prabhu2-7/+31
This patch adds support for firmware management device in enic driver. A management device is a virtual PCIe device that firmware can present to the host as its management endpoint. It provides the interface between the host and adapter firmware for all management operations. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17enic: Add set mac addressRoopa Prabhu2-2/+4
This patch implements the ndo_set_mac_address netdev operation for an enic device Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17cpmac: fix all checkpatch errors and warningsFlorian Fainelli1-13/+20
This patches fixes a couple of checkpatch warnings and errors: - lines over 80 columns - printk() instead of pr_cont() - assignments in tests (if ((foo == bar()))) Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17am79c961a: Use net_device_stats from struct net_deviceTobias Klauser2-20/+16
struct net_device has its own struct net_device_stats member, so we can use this one instead of a private copy in the dev_priv struct. Cc: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17r6040: fix all checkpatch errors and warningsFlorian Fainelli1-14/+20
This patch fixes a couple of errors and warnings spotted by checkpatch.pl: - some lines were over 80 columns - there were some whitespaces left The call to printk is now replaced by a call to pr_info and the log-level included in the driver version is now removed, so there are no longer false positives on this warning. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17pcnet_cs: Use pr_fmt and pr_<level>Joe Perches1-13/+13
It looks as if the printks in get_ax88190 are incorrect and were duplicated and superceded by a test in pcnet_config, so I removed them. Changed the level of the ax88190 test to KERN_NOTICE to match the other message styles in pcnet_config. Compiled but untested. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17pcnet_cs: Use proper netdev_*-printoutsWolfram Sang1-31/+27
To prevent broken messages like: [ 204.024291] eth%d: pcnet_reset_8390() did not complete. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Joe Perches <joe@perches.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17ethtool: Provide a default implementation of ethtool_ops::get_drvinfoBen Hutchings17-208/+23
The driver name and bus address for a net_device can normally be found through the driver model now. Instead of requiring drivers to provide this information redundantly through the ethtool_ops::get_drvinfo operation, use the driver model to do so if the driver does not define the operation. Since ETHTOOL_GDRVINFO no longer requires the driver to implement any operations, do not require net_device::ethtool_ops to be set either. Remove implementations of get_drvinfo and ethtool_ops that provide only this information. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16net/decnet: Adjust confusing if indentationJulia Lawall1-4/+4
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/isdn: Adjust confusing if indentationJulia Lawall3-7/+9
In hisax/hfc_sx.c and mISDN/l1oip_core.c, the code after the if is outdented so that it is not aligned with the if branch. In mISDN/dsp_cmx.c, an else is added between the original if branch and the following statement, in line with the code following it. Without this change, the first assignment to dsp->rx_W has no useful effect. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net: Adjust confusing if indentationJulia Lawall1-1/+1
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net/hamradio: Adjust confusing if indentationJulia Lawall1-1/+2
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net/bnx2x: Adjust confusing if indentationJulia Lawall1-5/+5
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net: Adjust confusing if indentationJulia Lawall1-1/+1
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/atm: Adjust confusing if indentationJulia Lawall1-1/+1
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net: Adjust confusing if indentationJulia Lawall2-6/+6
In amd8111e.c, indent the branch of an if. In eepro.c, outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net/irda: Adjust confusing if indentationJulia Lawall1-1/+1
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16net/atm: Adjust confusing if indentationJulia Lawall1-1/+1
Outdent the code following an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16drivers/net/wan: Adjust confusing if indentationJulia Lawall3-3/+3
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16macvtap: Implement multiqueue for macvtap driverKrishna Kumar2-18/+90
Implement multiqueue facility for macvtap driver. The idea is that a macvtap device can be opened multiple times and the fd's can be used to register eg, as backend for vhost. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16core: Factor out flow calculation from get_rps_cpuKrishna Kumar2-44/+71
Factor out flow calculation code from get_rps_cpu, since other functions can use the same code. Revisions: v2 (Ben): Separate flow calcuation out and use in select queue. v3 (Arnd): Don't re-implement MIN. v4 (Changli): skb->data points to ethernet header in macvtap, and make a fast path. Tested macvtap with this patch. v5 (Changli): - Cache skb->rxhash in skb_get_rxhash - macvtap may not have pow(2) queues, so change code for queue selection. (Arnd): - Use first available queue if all fails. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-16bnx2x: Load firmware in open() instead of probe()Dmitry Kravkov3-19/+36
Loading firmware when actually bringing eth device up. This also will allow driver to be insmoded when filesystem with firmware files is not available yet. Suggested by Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-15Revert "netlink: netlink_recvmsg() fix"David S. Miller1-16/+6
This reverts commit 1235f504aaba2ebeabc863fdb3ceac764a317d47. It causes regressions worse than the problem it was trying to fix. Eric will try to solve the problem another way. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-15Linux 2.6.36-rc1Linus Torvalds1-2/+2
2010-08-15arch/tile: don't validate CROSS_COMPILE needlesslyChris Metcalf1-9/+11
With this change, the arch/tile Makefile will only check for a valid combination of CROSS_COMPILE vs "uname -m" for a few common targets that are typically the ones we get wrong (vmlinux, all, and modules). The change handles the case of an empty "make" goal like "make all". Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-15mm: fix up some user-visible effects of the stack guard pageLinus Torvalds2-1/+15
This commit makes the stack guard page somewhat less visible to user space. It does this by: - not showing the guard page in /proc/<pid>/maps It looks like lvm-tools will actually read /proc/self/maps to figure out where all its mappings are, and effectively do a specialized "mlockall()" in user space. By not showing the guard page as part of the mapping (by just adding PAGE_SIZE to the start for grows-up pages), lvm-tools ends up not being aware of it. - by also teaching the _real_ mlock() functionality not to try to lock the guard page. That would just expand the mapping down to create a new guard page, so there really is no point in trying to lock it in place. It would perhaps be nice to show the guard page specially in /proc/<pid>/maps (or at least mark grow-down segments some way), but let's not open ourselves up to more breakage by user space from programs that depends on the exact deails of the 'maps' file. Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools source code to see what was going on with the whole new warning. Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-15arch/tile: export only COMMAND_LINE_SIZE to userspace.Chris Metcalf1-2/+6
This fixes a failure in "make headers_check" for tile. I hadn't realized this file was exported to userspace by default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-15arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNChris Metcalf1-3/+2
See commit a6eb9fe105d5de0053b261148cee56c94b4720ca. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2010-08-15ALSA: sound/usb/format: silence uninitialized variable warningsDan Carpenter1-0/+8
Gcc complains that ret might be used uninitialized: sound/usb/format.c: In function ‘snd_usb_parse_audio_format’: sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function sound/usb/format.c:354: note: ‘ret’ was declared here sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function sound/usb/format.c:414: note: ‘ret’ was declared here I suppose it could be uninitialized if there is ever a UAC_VERSION_3 released. Anyway this patch is worthwhile if only to silence the gcc warning. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-14ipv6: remove sysctl jiffies conversion on gc_elasticity and min_adv_mssMin Zhang1-2/+2
sysctl output ipv6 gc_elasticity and min_adv_mss as values divided by HZ. However, they are not in unit of jiffies, since ip6_rt_min_advmss refers to packet size and ip6_rt_fc_elasticity is used as scaler as in expire>>ip6_rt_gc_elasticity, so replace the jiffies conversion handler will regular handler for them. This has impact on scripts that are currently working assuming the divide by HZ, will yield different results with this patch in place. Signed-off-by: Min Zhang <mzhang@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-14xfrm: Use GFP_ATOMIC in xfrm_compile_policyHerbert Xu1-1/+1
As xfrm_compile_policy runs within a read_lock, we cannot use GFP_KERNEL for memory allocations. Reported-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-15gcc-4.6: ACPI: fix unused but set variables in ACPIAndi Kleen7-26/+11
Some minor improvements in error handling, but overall it was mostly dead code. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFSZhang Rui2-33/+54
Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/ is already available and has been working for years w/o any problem. The ACPI thermal procfs I/F will be removed in 2.6.37. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFSZhang Rui2-50/+82
Mark ACPI video driver procfs I/F deprecated, including: /proc/acpi/video/*/info /proc/acpi/video/*/DOS /proc/acpi/video/*/ROM /proc/acpi/video/*/POST /proc/acpi/video/*/POST_info /proc/acpi/video/*/*/info /proc/acpi/video/*/*/state /proc/acpi/video/*/*/EDID and /proc/acpi/video/*/*/brightness, because 1. we already have the sysfs I/F /sysclass/backlight/ as the replacement of /proc/acpi/video/*/*/brightness. 2. the other procfs I/F is not useful for userspace. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI processor: remove deprecated ACPI procfs I/FZhang Rui6-273/+0
Remove deprecated ACPI processor procfs I/F, including: /proc/acpi/processor/CPUX/power /proc/acpi/processor/CPUX/limit /proc/acpi/processor/CPUX/info /proc/acpi/processor/CPUX/throttling still exists, as we don't have sysfs I/F available for now. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI power_resource: remove unused procfs I/FZhang Rui1-127/+1
Remove unused ACPI power procfs I/F. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: remove deprecated ACPI procfs I/FZhang Rui7-484/+1
Rmove deprecated ACPI procfs I/F, including /proc/acpi/debug_layer /proc/acpi/debug_level /proc/acpi/info /proc/acpi/dsdt /proc/acpi/fadt /proc/acpi/sleep because the sysfs I/F is already available and has been working well for years. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15ACPI: introduce drivers/acpi/sysfs.cZhang Rui6-571/+688
Introduce drivers/acpi/sysfs.c. code for ACPI sysfs I/F, including #ifdef ACPI_DEBUG /sys/module/acpi/parameters/debug_layer /sys/module/acpi/parameters/debug_level /sys/module/acpi/parameters/trace_method_name /sys/module/acpi/parameters/trace_debug_layer /sys/module/acpi/parameters/trace_debug_level /sys/module/acpi/parameters/trace_state #endif /sys/module/acpi/parameters/acpica_version /sys/firmware/acpi/tables/ /sys/firmware/acpi/interrupts/ is moved to this file. No function change in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14ACPI: introduce module parameter acpi.aml_debug_outputZhang Rui4-2/+12
Introduce module parameter acpi.aml_debug_output. With acpi.aml_debug_output set, we can get AML debug object output (Store (AAA, Debug)), even with CONFIG_ACPI_DEBUG cleared. Together with the runtime custom method mechanism, we can debug AML code problems without rebuilding the kernel. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14ACPI: introduce drivers/acpi/debugfs.cZhang Rui5-75/+93
Introduce drivers/acpi/debugfs.c. Code for ACPI debugfs I/F, i.e. /sys/kernel/debug/acpi/custom_method, is moved to this file. And make ACPI debugfs always built in, even if CONFIG_ACPI_DEBUG is cleared. BTW:this adds about 400bytes code to ACPI, when CONFIG_ACPI_DEBUG is cleared. [uaccess.h build fix from Andrew Morton <akpm@linux-foundation.org>] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14intel_idle: recognize Lincroft Atom ProcessorArjan van de Ven1-0/+1
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14ACPI, APEI, ERST debug supportHuang Ying3-0/+217
This patch adds debugging/testing support to ERST. A misc device is implemented to export raw ERST read/write/clear etc operations to user space. With this patch, we can add ERST testing support to linuxfirmwarekit ISO (linuxfirmwarekit.org) to verify the kernel support and the firmware implementation. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14fusion: add function parameter names to kernel-docRandy Dunlap1-0/+2
Fix fusion missing kernel-doc: Warning(drivers/message/fusion/mptbase.c:649): No description found for parameter 'func_name' Warning(drivers/message/fusion/mptbase.c:8010): No description found for parameter 'cb_idx' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14fs/dcache: fix function param name in kernel-docRandy Dunlap1-1/+1
Fix parameter name in kernel-doc notation (causes a warning). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14fusion: fix non-kernel-doc comment blockRandy Dunlap1-1/+1
Fix comment begin notation not to look like kernel-doc since it's not. Removes kernel-doc warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14mm/page-writeback: fix non-kernel-doc function commentsRandy Dunlap1-2/+2
Remove leading /** from non-kernel-doc function comments to prevent kernel-doc warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.