aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/s390 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-06Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-10/+11
Pull s390 fixes from Martin Schwidefsky: "A few more changes for v4.18: - wire up the two new system calls io_pgetevents and rseq - fix a register corruption in the expolines code for machines without EXRL - drastically reduce the memory utilization of the dasd driver - fix reference counting for KVM page table pages" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up rseq system call s390: wire up io_pgetevents system call s390/mm: fix refcount usage for 4K pgste s390/dasd: reduce the default queue depth and nr of hardware queues s390: Correct register corruption in critical section cleanup
2018-07-02s390/dasd: reduce the default queue depth and nr of hardware queuesStefan Haberland2-10/+11
Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-30s390/qeth: consistently re-enable device featuresJulian Wiedmann4-17/+16
commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: don't clobber buffer on async TX completionJulian Wiedmann2-6/+27
If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]Vasily Gorbik1-2/+2
*ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: fix race when setting MAC addressJulian Wiedmann1-4/+11
When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30Revert "s390/qeth: use Read device to query hypervisor for MAC"Julian Wiedmann1-1/+1
This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek <mkubecek@suse.com> Tested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-19Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds12-235/+250
Pull s390 updates from Martin Schwidefsky: "common I/O layer - Fix bit-fields crossing storage-unit boundaries in css_general_char dasd driver - Avoid a sparse warning in regard to the queue lock - Allocate the struct dasd_ccw_req as per request data. Only for internal I/O is the structure allocated separately - Remove the unused function dasd_kmalloc_set_cda - Save a few bytes in struct dasd_ccw_req by reordering fields - Convert remaining users of dasd_kmalloc_request to dasd_smalloc_request and remove the now unused function vfio/ccw - Refactor and improve pfn_array_alloc_pin/pfn_array_pin - Add a new tracepoint for failed vfio/ccw requests - Add a CCW translation improvement to accept more requests as valid - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: only use preallocated requests s390/dasd: reshuffle struct dasd_ccw_req s390/dasd: remove dasd_kmalloc_set_cda s390/dasd: move dasd_ccw_req to per request data s390/dasd: simplify locking in process_final_queue s390/cio: sanitize css_general_characteristics definition vfio: ccw: add tracepoints for interesting error paths vfio: ccw: set ccw->cda to NULL defensively vfio: ccw: refactor and improve pfn_array_alloc_pin() vfio: ccw: shorten kernel doc description for pfn_array_pin() vfio: ccw: push down unsupported IDA check vfio: ccw: fix error return in vfio_ccw_sch_event s390/archrandom: Rework arch random implementation. s390/net: add pnetid support
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-1/+1
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook9-23/+27
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook3-6/+7
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12s390/dasd: only use preallocated requestsSebastian Ott4-77/+8
Change the remaining users of dasd_kmalloc_request to use preallocated memory and remove this function. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: reshuffle struct dasd_ccw_reqSebastian Ott1-11/+3
Move some members of struct dasd_ccw_req to get rid of padding bytes. This saves 16 bytes per dasd request. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: remove dasd_kmalloc_set_cdaSebastian Ott1-6/+0
There is no user of this function. Just remove it. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: move dasd_ccw_req to per request dataSebastian Ott5-47/+57
Let the block layer allocate per request data to store struct dasd_ccw_req. We still need extra preallocated memory for usage by ccw programs (which vary in length) and for requests which don't originate from the block layer. Link: https://lkml.kernel.org/r/20180530074130.GA6927@infradead.org Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12s390/dasd: simplify locking in process_final_queueSebastian Ott1-27/+32
Simplify locking in __dasd_device_process_final_queue to fix the following sparse warning: drivers/s390/block/dasd.c:1902:9: warning: context imbalance in '__dasd_device_process_final_queue' - different lock contexts for basic block Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-12Merge tag 'vfio-ccw-20180529' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into featuresMartin Schwidefsky5-67/+150
Pull vfio-ccw from Cornelia Huck with the following changes: - Various fixes and improvements in vfio-ccw, including a first stab at adding tracepoints.
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-167/+400
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-06-08Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-0/+7
Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
2018-06-08Merge branch 'for-4.18/mcsafe' into libnvdimm-for-nextDan Williams1-0/+7
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds7-292/+229
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-2/+1
Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds7-54/+100
Pull s390 updates from Martin Schwidefsky: - A rework for the s390 arch random code, the TRNG instruction is rather slow and should not be used on the interrupt path - A fix for a memory leak in the zcrypt driver - Changes to the early boot code to add a compile time check for code that may not use the .bss section, with the goal to avoid initrd corruptions - Add an interface to get the physical network ID (pnetid), this is useful to group network devices that are attached to the same network - Some cleanup for the linker script - Some code improvement for the dasd driver - Two fixes for the perf sampling support * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix CCA and EP11 CPRB processing failure memory leak. s390/archrandom: Rework arch random implementation. s390/net: add pnetid support s390/dasd: simplify locking in dasd_times_out s390/cio: add test for ccwgroup device s390/cio: add helper to query utility strings per given ccw device s390: remove no-op macro VMLINUX_SYMBOL() s390: remove closung punctuation from spectre messages s390: introduce compile time check for empty .bss section s390/early: move functions which may not access bss section to extra file s390/early: get rid of #ifdef CONFIG_BLK_DEV_INITRD s390/early: get rid of memmove_early s390/cpum_sf: Add data entry sizes to sampling trailer entry perf: fix invalid bit in diagnostic entry
2018-06-04Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds6-6/+1
Pull timers and timekeeping updates from Thomas Gleixner: - Core infrastucture work for Y2038 to address the COMPAT interfaces: + Add a new Y2038 safe __kernel_timespec and use it in the core code + Introduce config switches which allow to control the various compat mechanisms + Use the new config switch in the posix timer code to control the 32bit compat syscall implementation. - Prevent bogus selection of CPU local clocksources which causes an endless reselection loop - Remove the extra kthread in the clocksource code which has no value and just adds another level of indirection - The usual bunch of trivial updates, cleanups and fixlets all over the place - More SPDX conversions * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) clocksource/drivers/mxs_timer: Switch to SPDX identifier clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier clocksource/drivers/timer-imx-gpt: Remove outdated file path clocksource/drivers/arc_timer: Add comments about locking while read GFRC clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages clocksource/drivers/sprd: Fix Kconfig dependency clocksource: Move inline keyword to the beginning of function declarations timer_list: Remove unused function pointer typedef timers: Adjust a kernel-doc comment tick: Prefer a lower rating device only if it's CPU local device clocksource: Remove kthread time: Change nanosleep to safe __kernel_* types time: Change types to new y2038 safe __kernel_* types time: Fix get_timespec64() for y2038 safe compat interfaces time: Add new y2038 safe __kernel_timespec posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_COMPAT_32BIT_TIME time: Introduce CONFIG_64BIT_TIME in architectures compat: Enable compat_get/put_timespec64 always ...
2018-06-04Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-32/+4
Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-04Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block updates from Jens Axboe: - clean up how we pass around gfp_t and blk_mq_req_flags_t (Christoph) - prepare us to defer scheduler attach (Christoph) - clean up drivers handling of bounce buffers (Christoph) - fix timeout handling corner cases (Christoph/Bart/Keith) - bcache fixes (Coly) - prep work for bcachefs and some block layer optimizations (Kent). - convert users of bio_sets to using embedded structs (Kent). - fixes for the BFQ io scheduler (Paolo/Davide/Filippo) - lightnvm fixes and improvements (Matias, with contributions from Hans and Javier) - adding discard throttling to blk-wbt (me) - sbitmap blk-mq-tag handling (me/Omar/Ming). - remove the sparc jsflash block driver, acked by DaveM. - Kyber scheduler improvement from Jianchao, making it more friendly wrt merging. - conversion of symbolic proc permissions to octal, from Joe Perches. Previously the block parts were a mix of both. - nbd fixes (Josef and Kevin Vigor) - unify how we handle the various kinds of timestamps that the block core and utility code uses (Omar) - three NVMe pull requests from Keith and Christoph, bringing AEN to feature completeness, file backed namespaces, cq/sq lock split, and various fixes - various little fixes and improvements all over the map * tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits) blk-mq: update nr_requests when switching to 'none' scheduler block: don't use blocking queue entered for recursive bio submits dm-crypt: fix warning in shutdown path lightnvm: pblk: take bitmap alloc. out of critical section lightnvm: pblk: kick writer on new flush points lightnvm: pblk: only try to recover lines with written smeta lightnvm: pblk: remove unnecessary bio_get/put lightnvm: pblk: add possibility to set write buffer size manually lightnvm: fix partial read error path lightnvm: proper error handling for pblk_bio_add_pages lightnvm: pblk: fix smeta write error path lightnvm: pblk: garbage collect lines with failed writes lightnvm: pblk: rework write error recovery path lightnvm: pblk: remove dead function lightnvm: pass flag on graceful teardown to targets lightnvm: pblk: check for chunk size before allocating it lightnvm: pblk: remove unnecessary argument lightnvm: pblk: remove unnecessary indirection lightnvm: pblk: return NVM_ error on failed submission lightnvm: pblk: warn in case of corrupted write buffer ...
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-2/+5
Pull s390 fixes from Martin Schwidefsky: - a missing -msoft-float for the compile of the kexec purgatory - a fix for the dasd driver to avoid the double use of a field in the 'struct request' [ That latter one is being discussed, and Christoph asked for something cleaner, but for now it's a fix ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: use blk_mq_rq_from_pdu for per request data s390/purgatory: Fix endless interrupt loop
2018-05-30s390/zcrypt: Fix CCA and EP11 CPRB processing failure memory leak.Harald Freudenberger3-40/+43
Tests showed, that the zcrypt device driver produces memory leaks when a valid CCA or EP11 CPRB can't get delivered or has a failure during processing within the zcrypt device driver. This happens when a invalid domain or adapter number is used or the lower level software or hardware layers produce any kind of failure during processing of the request. Only CPRBs send to CCA or EP11 cards can produce this memory leak. The accelerator and the CPRBs processed by this type of crypto card is not affected. The two fields message and private within the ap_message struct are allocated with pulling the function code for the CPRB but only freed when processing of the CPRB succeeds. So for example an invalid domain or adapter field causes the processing to fail, leaving these two memory areas allocated forever. Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-29block: rename BLK_EH_NOT_HANDLED to BLK_EH_DONEChristoph Hellwig1-3/+3
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that is not what is happening - instead the driver already completed the command. Fix the symbolic name to reflect that a little better. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-29vfio: ccw: add tracepoints for interesting error pathsHalil Pasic3-1/+71
Add some tracepoints so we can inspect what is not working as is should. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-5-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-29vfio: ccw: set ccw->cda to NULL defensivelyDong Jia Shi1-11/+20
Let's avoid free on ccw->cda that points to a guest address or an already freed memory area by setting it to NULL if memory allocation didn't happen or failed. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-4-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-29vfio: ccw: refactor and improve pfn_array_alloc_pin()Dong Jia Shi1-46/+36
This refactors pfn_array_alloc_pin() and also improves it by adding defensive code in error handling so that calling pfn_array_unpin_free() after error return won't lead to problem. This mainly does: 1. Merge pfn_array_pin() into pfn_array_alloc_pin(), since there is no other user of pfn_array_pin(). As a result, also remove kernel-doc for pfn_array_pin() and add/update kernel-doc for pfn_array_alloc_pin() and struct pfn_array. 2. For a vfio_pin_pages() failure, set pa->pa_nr to zero to indicate zero pages were pinned. 3. Set pa->pa_iova_pfn to NULL right after it was freed. Suggested-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-3-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-29vfio: ccw: shorten kernel doc description for pfn_array_pin()Dong Jia Shi1-8/+6
The kernel doc description for usage of the struct pfn_array in pfn_array_pin() is unnecessary long. Let's shorten it by describing the contents of the struct pfn_array fields at the struct's definition instead. Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180523025645.8978-2-bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-29vfio: ccw: push down unsupported IDA checkHalil Pasic1-3/+16
There is at least one relevant guest OS that doesn't set the IDA flags in the ORB as we would like them, but never uses any IDA. So instead of saying -EOPNOTSUPP when observing an ORB, such that a channel program specified by it could be a not supported one, let us say -EOPNOTSUPP only if the channel program is a not supported one. Of course, the real solution would be doing proper translation for all IDA. This is possible, but given the current code not straight forward. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <20180516173342.15174-1-pasic@linux.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-29vfio: ccw: fix error return in vfio_ccw_sch_eventDong Jia Shi1-1/+4
If the device has not been registered, or there is work pending, we should reschedule a sch_event call again. Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-9/+33
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25s390/dasd: simplify locking in dasd_times_outSebastian Ott1-14/+17
Provide __dasd_cancel_req that is called with the ccw device lock held to simplify the locking in dasd_times_out. Also this removes the following sparse warning: context imbalance in 'dasd_times_out' - different lock contexts for basic block Note: with this change dasd_schedule_device_bh is now called (via dasd_cancel_req) with the ccw device lock held. But is is already the case for other codepaths. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-22dax: Introduce a ->copy_to_iter dax operationDan Williams1-0/+7
Similar to the ->copy_from_iter() operation, a platform may want to deploy an architecture or device specific routine for handling reads from a dax_device like /dev/pmemX. On x86 this routine will point to a machine check safe version of copy_to_iter(). For now, add the plumbing to device-mapper and the dax core. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-23s390/cio: add test for ccwgroup deviceSebastian Ott1-0/+6
Add a test to check if a given device is a ccwgroup device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/cio: add helper to query utility strings per given ccw deviceSebastian Ott1-0/+31
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/dasd: use blk_mq_rq_from_pdu for per request dataSebastian Ott1-2/+5
Dasd uses completion_data from struct request to store per request private data - this is problematic since this member is part of a union which is also used by IO schedulers. Let the block layer maintain space for per request data behind each struct request. Fixes crashes on block layer timeouts like this one: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:0000000001308007 R3:00000000fffc8007 S:00000000fffcc000 P:000000000000013d Oops: 0004 ilc:2 [#1] PREEMPT SMP Modules linked in: [...] CPU: 0 PID: 1480 Comm: kworker/0:2H Not tainted 4.17.0-rc4-00046-gaa3bcd43b5af #203 Hardware name: IBM 3906 M02 702 (LPAR) Workqueue: kblockd blk_mq_timeout_work Krnl PSW : 0000000067ac406b 00000000b6960308 (do_raw_spin_trylock+0x30/0x78) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000c00 0000000000000000 0000000000000000 0000000000000001 0000000000b9d3c8 0000000000000000 0000000000000001 00000000cf9639d8 0000000000000000 0700000000000000 0000000000000000 000000000099f09e 0000000000000000 000000000076e9d0 000000006247bb08 000000006247bae0 Krnl Code: 00000000001c159c: b90400c2 lgr %r12,%r2 00000000001c15a0: a7180000 lhi %r1,0 #00000000001c15a4: 583003a4 l %r3,932 >00000000001c15a8: ba132000 cs %r1,%r3,0(%r2) 00000000001c15ac: a7180001 lhi %r1,1 00000000001c15b0: a784000b brc 8,1c15c6 00000000001c15b4: c0e5004e72aa brasl %r14,b8fb08 00000000001c15ba: 1812 lr %r1,%r2 Call Trace: ([<0700000000000000>] 0x700000000000000) [<0000000000b9d3d2>] _raw_spin_lock_irqsave+0x7a/0xb8 [<000000000099f09e>] dasd_times_out+0x46/0x278 [<000000000076ea6e>] blk_mq_terminate_expired+0x9e/0x108 [<000000000077497a>] bt_for_each+0x102/0x130 [<0000000000774e54>] blk_mq_queue_tag_busy_iter+0x74/0xd8 [<000000000076fea0>] blk_mq_timeout_work+0x260/0x320 [<0000000000169dd4>] process_one_work+0x3bc/0x708 [<000000000016a382>] worker_thread+0x262/0x408 [<00000000001723a8>] kthread+0x160/0x178 [<0000000000b9e73a>] kernel_thread_starter+0x6/0xc [<0000000000b9e734>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000000000b9d3cc>] _raw_spin_lock_irqsave+0x74/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-21Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-9/+33
Pull SCSI fixes from James Bottomley: "Two driver fixes (zfcp and target core), one information leak in sg and one build clean up" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: allocate with __GFP_ZERO in sg_build_indirect() scsi: core: clean up generated file scsi_devinfo_tbl.c scsi: target: tcmu: fix error resetting qfull_time_out to default scsi: zfcp: fix infinite iteration on ERP ready list
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-10/+15
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18scsi: zfcp: enhance comments on fc_link_speed and supported_speedJens Remus1-3/+3
The comment on fsf_qtcb_bottom_port.supported_speed did read as if the field can only assume one of two possible values (i.e. 0x1 for 1 GBit/s or 0x2 for 2 GBit/s). This is not true for two reasons: first it is a flag field and can thus assume any combination and second there are meanwhile more speeds. Clarify comment on fsf_qtcb_bottom_port.supported_speed and add a comment to fsf_qtcb_bottom_config.fc_link_speed. Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Acked-by: Benjamin Block <bblock@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: zfcp: add port speed capabilitiesJens Remus1-1/+10
Add port speed capabilities as defined in FC-LS RPSC ELS that have a counterpart FC_PORTSPEED_* defined in scsi/scsi_transport_fc.h. Suggested-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Acked-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: zfcp: assert that the ERP lock is held when tracing a recovery triggerJens Remus1-0/+2
Otherwise iterating with list_for_each() over the adapter->erp_ready_head and adapter->erp_running_head lists can lead to an infinite loop. See commit "zfcp: fix infinite iteration on erp_ready_head list". The run-time check is only performed for debug kernels which have the kernel lock validator enabled. Following is an example of the warning that is reported, if the ERP lock is not held when calling zfcp_dbf_rec_trig(): WARNING: CPU: 0 PID: 604 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x172/0x188 Modules linked in: ... CPU: 0 PID: 604 Comm: kworker/u128:3 Not tainted 4.16.0-... #1 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Workqueue: zfcp_q_0.0.1906 zfcp_scsi_rport_work Krnl PSW : 00000000330fdbf9 00000000367e9728 (zfcp_dbf_rec_trig+0x172/0x188) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 Krnl GPRS: 00000000c57a5d99 3288200000000000 0000000000000000 000000006cc82740 00000000009d09d6 0000000000000000 00000000000000ff 0000000000000000 0000000000000000 0000000000e1b5fe 000000006de01d38 0000000076130958 000000006cc82548 000000006de01a98 00000000009d09d6 000000006a6d3c80 Krnl Code: 00000000009d0ad2: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0ad8: c0f4000d7dd0 brcl 15,b80678 #00000000009d0ade: a7f40001 brc 15,9d0ae0 >00000000009d0ae2: a7f4ff7d brc 15,9d09dc 00000000009d0ae6: e340f0f00004 lg %r4,240(%r15) 00000000009d0aec: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0af2: 07f4 bcr 15,%r4 00000000009d0af4: 0707 bcr 0,%r7 Call Trace: ([<00000000009d09d6>] zfcp_dbf_rec_trig+0x66/0x188) [<00000000009dd740>] zfcp_scsi_rport_work+0x98/0x190 [<0000000000169b34>] process_one_work+0x3d4/0x6f8 [<000000000016a08a>] worker_thread+0x232/0x418 [<000000000017219e>] kthread+0x166/0x178 [<0000000000b815ea>] kernel_thread_starter+0x6/0xc [<0000000000b815e4>] kernel_thread_starter+0x0/0xc 2 locks held by kworker/u128:3/604: #0: ((wq_completion)name){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 #1: ((work_completion)(&port->rport_work)){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 Last Breaking-Event-Address: [<00000000009d0ade>] zfcp_dbf_rec_trig+0x16e/0x188 ---[ end trace b2f4020572e2c124 ]--- Suggested-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: zfcp: cleanup indentation for posting FC eventsSteffen Maier1-3/+2
I just happened to see the function header indentation of zfcp_fc_enqueue_event() and I picked some more from checkpatch: $ checkpatch.pl --strict -f drivers/s390/scsi/zfcp_fc.c ... CHECK: Alignment should match open parenthesis #113: FILE: drivers/s390/scsi/zfcp_fc.c:113: + fc_host_post_event(adapter->scsi_host, fc_get_event_number(), + event->code, event->data); CHECK: Blank lines aren't necessary before a close brace '}' #118: FILE: drivers/s390/scsi/zfcp_fc.c:118: + +} ... The change complements v2.6.36 commit 2d1e547f7523 ("[SCSI] zfcp: Post events through FC transport class"). Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: zfcp: support SCSI_ADAPTER_RESET via scsi_host sysfs attribute host_resetSteffen Maier4-4/+39
Make use of feature introduced with v3.2 commit 294436914454 ("[SCSI] scsi: Added support for adapter and firmware reset"). The common code interface was introduced for commit 95d31262b3c1 ("[SCSI] qla4xxx: Added support for adapter and firmware reset"). $ echo adapter > /sys/class/scsi_host/host<N>/host_reset Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : REC Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 ZFCP_DBF_REC_TRIG Tag : scshr_y SCSI sysfs host_reset yes LUN : 0xffffffffffffffff none (invalid) WWPN : 0x0000000000000000 none (invalid) D_ID : 0x00000000 none (invalid) Adapter status : 0x4500050b Port status : 0x00000000 none (invalid) LUN status : 0x00000000 none (invalid) Ready count : 0x00000001 Running count : 0x00000000 ERP want : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER ERP need : 0x04 ZFCP_ERP_ACTION_REOPEN_ADAPTER This is the common code equivalent to the zfcp-specific &dev_attr_adapter_failed.attr in zfcp_sysfs_adapter_attrs.attrs[]: $ echo 0 > /sys/bus/ccw/drivers/zfcp/<devbusid>/failed The unsupported case returns EOPNOTSUPP: $ echo firmware > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Operation not supported Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : scshr_n SCSI sysfs host_reset no Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0xffffffa1 -EOPNOTSUPP==-95 SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 For any other invalid value, common code returns EINVAL without invoking our callback: $ echo foo > /sys/class/scsi_host/host<N>/host_reset -bash: echo: write error: Invalid argument Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.