aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/bnx2fc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-23bnx2fc: bnx2fc_eh_abort(): fix wrong return code.Maurizio Lombardi1-3/+2
If the link is not ready, the bnx2fc_eh_abort() function should return FAILED. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23bnx2fc: Show information about log levels in 'modinfo'Jose Castillo1-0/+9
This patch adds the information of the different values that can be used in the module parameter 'debug_logging', as it is shown below: $ modinfo bnx2fc [...] parm: debug_logging:Option to enable extended logging, Default is 0 - no logging. 0x01 - SCSI cmd error, cleanup. 0x02 - Session setup, cleanup, etc. 0x04 - lport events, link, mtu, etc. 0x08 - ELS logs. 0x10 - fcoe L2 fame related logs. 0xff - LOG all messages. (int) Signed-off-by: Jose Castillo <jcastillo@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09bnx2fc: Update version number to 2.9.6.Chad Dupuis2-2/+2
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: Remove explicit logouts.Chad Dupuis4-85/+12
Explicit logouts from bnx2fc were causing race conditions in either returning stale SCSI commands or not allowing a target to log back in. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: Fix FCP RSP residual parsing.Chad Dupuis1-1/+4
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: Set ELS transfer length correctly for middle path commands.Chad Dupuis2-2/+7
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: Remove 'NetXtreme II' from source files.Chad Dupuis11-15/+14
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: Update copyright for 2015.Chad Dupuis10-20/+20
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09scsi: use host wide tags by defaultChristoph Hellwig1-1/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09bnx2fc: reduce stack usage in __bnx2fc_enableArnd Bergmann1-4/+9
When the bnx2fc driver was changed to read the npiv table from nvram, the stack of the __bnx2fc_enable function gained an additional 1028 byte structure that gcc rightfully warns about: drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function '__bnx2fc_enable': drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2134:1: warning: the frame size of 1128 bytes is larger than 1024 bytes [-Wframe-larger-than=] In order to avoid a possible kernel stack overflow and to get rid of the warning, this changes the function to use a dynamic allocation of the structure using kzalloc. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2971ff67bd3 ("bnx2fc: Read npiv table from nvram and create vports.") Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27bnx2fc: Do not log error for netevents that need no actionShirish Pargaonkar1-1/+0
Do not log error for netevents that need no action such as NETDEV_REGISTER 0x0005, NETDEV_CHANGEADDR, and NETDEV_CHANGENAME. It results in logging error messages such as these [ 35.315872] bnx2fc: Unknown netevent 5 [ 35.315935] bnx2fc: Unknown netevent 8 [ 35.353866] bnx2fc: Unknown netevent 10 and generating bug reports. Remove logging this message as an ERROR instead of turning them into either DEBUG or INFO level messages. Signed-off-by: Shirish Pargaonkar <spargaonkar@suse.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-06bnx2fc: Read npiv table from nvram and create vports.Joe Carnuccio1-0/+66
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley2-6/+1
2014-12-08Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley1-2/+4
Conflicts: drivers/scsi/scsi_debug.c Agreed and tested resolution to a merge problem between a fix in scsi_debug and a driver update Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-12-08Merge remote-tracking branch 'scsi-queue/core-for-3.19' into for-linusJames Bottomley2-16/+5
2014-12-04fc: FCP_PTA_SIMPLE is 0Christoph Hellwig1-5/+1
Not need to have an if/else to either assign FCP_PTA_SIMPLE or 0 to a variable. Btw, it seems we really should factor generating a fcp cmnd from a scsi_cmnd into a common helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-1/+1
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-0/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-20bnx2fc: do not add shared skbs to the fcoe_rx_listMaurizio Lombardi1-0/+7
In some cases, the fcoe_rx_list may contains multiple instances of the same skb (the so called "shared skbs"). the bnx2fc_l2_rcv thread is a loop that extracts a skb from the list, modifies (and destroys) its content and then proceed to the next one. The problem is that if the skb is shared, the remaining instances will be corrupted. The solution is to use skb_share_check() before adding the skb to the fcoe_rx_list. [ 6286.808725] ------------[ cut here ]------------ [ 6286.808729] WARNING: at include/scsi/fc_frame.h:173 bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc]() [ 6286.808748] Modules linked in: bnx2x(-) mdio dm_service_time bnx2fc cnic uio fcoe libfcoe 8021q garp stp mrp libfc llc scsi_transport_fc scsi_tgt sg iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel e1000e ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper ptp cryptd hpilo serio_raw hpwdt lpc_ich pps_core ipmi_si pcspkr mfd_core ipmi_msghandler shpchp pcc_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit ata_piix drm_kms_helper ttm drm libata i2c_core hpsa dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mdio] [ 6286.808750] CPU: 3 PID: 1304 Comm: bnx2fc_l2_threa Not tainted 3.10.0-121.el7.x86_64 #1 [ 6286.808750] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 6286.808752] 0000000000000000 000000000b36e715 ffff8800deba1e00 ffffffff815ec0ba [ 6286.808753] ffff8800deba1e38 ffffffff8105dee1 ffffffffa05618c0 ffff8801e4c81888 [ 6286.808754] ffffe8ffff663868 ffff8801f402b180 ffff8801f56bc000 ffff8800deba1e48 [ 6286.808754] Call Trace: [ 6286.808759] [<ffffffff815ec0ba>] dump_stack+0x19/0x1b [ 6286.808762] [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80 [ 6286.808763] [<ffffffff8105e00a>] warn_slowpath_null+0x1a/0x20 [ 6286.808765] [<ffffffffa054f415>] bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc] [ 6286.808767] [<ffffffffa054eff0>] ? bnx2fc_disable+0x90/0x90 [bnx2fc] [ 6286.808769] [<ffffffff81085aef>] kthread+0xcf/0xe0 [ 6286.808770] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808772] [<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0 [ 6286.808773] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808774] ---[ end trace c6cdb939184ccb4e ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org
2014-11-12bnx2fc: fix an error code in _bnx2fc_create()Dan Carpenter1-0/+1
We should be returning an error code here instead of success. Either -ENODEV or -ENOMEM would work. There is also a failure message in printk(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12bnx2fc: check IS_ERR() instead of NULLDan Carpenter1-1/+1
The bnx2fc_if_create() function returns NULL on failure, it never returns an error pointer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-0/+1
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: remove abuses of scsi_populate_tagChristoph Hellwig1-15/+3
Unless we want to build a SPI tag message we should just check SCMD_TAGGED instead of reverse engineering a tag type through the use of scsi_populate_tag_msg. Also rename the function to spi_populate_tag_msg, make it behave like the other spi message helpers, and move it to the spi transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: provide a generic change_queue_type methodChristoph Hellwig1-1/+1
Most drivers use exactly the same implementation, so provide it as a library function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-10bnx2fc: fix tgt spinlock lockingMaurizio Lombardi2-11/+10
bnx2fc_queuecommand(): when allocating a new io_req, the tgt_lock spinlock must be locked before calling bnx2fc_cmd_alloc(). The spinlock should also be kept locked until bnx2fc_post_io_req() has been completed. If not, a kernel thread may call bnx2fc_process_cq_compl() that extracts the newly allocated io_req from hba->cmd_mgr->cmds and destroys it while it is still being used by bnx2fc_post_io_req(). BUG: unable to handle kernel NULL pointer dereference at 000000000000004c IP: [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.3/net/eth3/type CPU 33 Modules linked in: autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc 8021q garp scsi_tgt stp llc cpufreq_ondemand freq_table pcc_cpufreq ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 power_meter microcode iTCO_wdt iTCO_vendor_support hpilo hpwdt sg bnx2x libcrc32c mdio serio_raw lpc_ich mfd_core shpchp ext4 jbd2 mbcache sd_mod crc_t10dif hpsa video output dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 7355, comm: bnx2fc_thread/3 Not tainted 2.6.32-431.el6.x86_64 #1 HP ProLiant BL460c Gen8 RIP: 0010:[<ffffffffa03130da>] [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP: 0018:ffff8820b0da3b68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff882003801080 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff882003801100 RBP: ffff8820b0da3bc8 R08: ffffffff8160d4e8 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88400e600e00 R13: ffff8840108fbe40 R14: ffff88200ffe5400 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8820b0da0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000004c CR3: 0000002010b67000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bnx2fc_thread/3 (pid: 7355, threadinfo ffff88401f940000, task ffff884012f5f540) Stack: ffff8820b0da3bc8 ffffffff81527303 ffff884000000020 ffff8820b0da3bd8 <d> ffff8820b0da3b98 000000028138931a ffff88400f506078 ffff88400e600e00 <d> ffff88200ffe5400 ffff88200ffe5590 0000000000000021 0000000000000002 Call Trace: <IRQ> [<ffffffff81527303>] ? printk+0x41/0x46 [<ffffffffa03169bc>] bnx2fc_post_io_req+0x11c/0x440 [bnx2fc] [<ffffffff812825b9>] ? cpumask_next_and+0x29/0x50 [<ffffffff8137ffd0>] ? scsi_done+0x0/0x60 [<ffffffffa0316df7>] bnx2fc_queuecommand+0x117/0x140 [bnx2fc] [<ffffffff81380245>] scsi_dispatch_cmd+0xe5/0x310 [<ffffffff81388b9e>] scsi_request_fn+0x5ee/0x7a0 [<ffffffff812658f1>] __blk_run_queue+0x31/0x40 [<ffffffff81265a40>] blk_run_queue+0x30/0x50 [<ffffffff81387da6>] scsi_run_queue+0xc6/0x270 [<ffffffff81260f92>] ? elv_requeue_request+0x52/0xa0 [<ffffffff813897a0>] scsi_requeue_command+0x90/0xb0 [<ffffffff81389b84>] scsi_io_completion+0x154/0x6c0 [<ffffffff8137ff62>] scsi_finish_command+0xc2/0x130 [<ffffffff8138a255>] scsi_softirq_done+0x145/0x170 [<ffffffff8126e865>] blk_done_softirq+0x85/0xa0 [<ffffffff8107a8e1>] __do_softirq+0xc1/0x1e0 [<ffffffff8100c30c>] ? call_softirq+0x1c/0x30 [<ffffffff8100c30c>] call_softirq+0x1c/0x30 <EOI> [<ffffffff8100fa75>] ? do_softirq+0x65/0xa0 [<ffffffff8107a40a>] local_bh_enable_ip+0x9a/0xb0 [<ffffffff8152a4eb>] _spin_unlock_bh+0x1b/0x20 [<ffffffffa0313937>] bnx2fc_process_cq_compl+0x257/0x2b0 [bnx2fc] [<ffffffffa03114ea>] bnx2fc_percpu_io_thread+0xea/0x160 [bnx2fc] [<ffffffffa0311400>] ? bnx2fc_percpu_io_thread+0x0/0x160 [bnx2fc] [<ffffffff8109aef6>] kthread+0x96/0xa0 [<ffffffff8100c20a>] child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Code: 89 df 45 8b 7e 30 0f 85 75 01 00 00 89 d1 31 c0 c1 e9 03 83 e2 04 89 c9 f3 48 ab 74 06 c7 07 00 00 00 00 49 89 9c 24 88 01 00 00 <83> 7e 4c 01 b8 01 00 00 00 0f 84 e7 00 00 00 89 c2 0a 53 38 41 RIP [<ffffffffa03130da>] bnx2fc_init_task+0x6a/0x230 [bnx2fc] RSP <ffff8820b0da3b68> CR2: 000000000000004c Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-07Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+13
Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (megaraid_sas, arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes and miscellaneous updates (including the pci_msix_enable_range() changes that have been pending for a while)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits) scsi: add a CONFIG_SCSI_MQ_DEFAULT option ufs: definitions for phy interface ufs: tune bkops while power managment events ufs: Add support for clock scaling using devfreq framework ufs: Add freq-table-hz property for UFS device ufs: Add support for clock gating ufs: refactor configuring power mode ufs: add UFS power management support ufs: introduce well known logical unit in ufs ufs: manually add well known logical units ufs: Active Power Mode - configuring bActiveICCLevel ufs: improve init sequence ufs: refactor query descriptor API support ufs: add voting support for host controller power ufs: Add clock initialization support ufs: Add regulator enable support ufs: Allow vendor specific initialization scsi: don't add scsi_device if its already visible scsi: fix the type for well known LUs scsi: fix comment in struct Scsi_Host definition ...
2014-09-22scsi: Use 'depends' with LIBFC instead of 'select'.David S. Miller1-2/+2
LIBFC depends upon SCSI_FC_ATTRS and select's CRC32C. The only alternative would be to 'select' CRC32C and all of SCSI_FC_ATTRS direct and indirect dependencies in the Kconfig section for every LIBFCOE user which makes little sense. Subsequently, use 'depends' instead of 'select' for LIBFCOE too. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16bnx2fc: fix incorrect DMA memory mapping in bnx2fc_unmap_sg_list()Chad Dupuis1-2/+13
This patch is based on a problem and solution from Maurizio Lombardi where bnx2fc isn't consistent in which device struct we using for DMA map and unmap operations. Make them consistent by using dma_sg_unmap in bnx2fc_unmap_sg_list like bnx2fc_map_sg. Reviewed-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-15bnx2i/bnx2fc : fix randconfig error in next-20140909Anish Bhatt1-0/+1
Just like CNIC, tristate of these two modules is also dependent on IPV6. These need to be handled separately as they select CNIC, which can override tristate for CNIC from 'm' to 'y', which can cause build failures when ipv6 is compiled as a module even if CNIC's Kconfig will only 'm' or 'n' when ipv6 is compiled as a module. Fixes: c99d667e8527 ("cnic : Cleanup CONFIG_IPV6 & VLAN check") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-25bnx2fc: Rebranding bnx2fc driverSaurav Kashyap11-14/+72
QLogic has acquired the NetXtremeII products and drivers from Broadcom. This patch re-brands bnx2fc driver as a QLogic driver Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke1-2/+2
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-25bnx2fc: Improve stats update mechanismNeil Horman1-12/+4
Recently had this warning reported: [ 290.489047] Call Trace: [ 290.489053] [<ffffffff8169efec>] dump_stack+0x19/0x1b [ 290.489055] [<ffffffff810ac7a9>] __might_sleep+0x179/0x230 [ 290.489057] [<ffffffff816a4ad5>] mutex_lock_nested+0x55/0x520 [ 290.489061] [<ffffffffa01b9905>] ? bnx2fc_l2_rcv_thread+0xc5/0x4c0 [bnx2fc] [ 290.489065] [<ffffffffa0174c1a>] fc_vport_id_lookup+0x3a/0xa0 [libfc] [ 290.489068] [<ffffffffa01b9a6c>] bnx2fc_l2_rcv_thread+0x22c/0x4c0 [bnx2fc] [ 290.489070] [<ffffffffa01b9840>] ? bnx2fc_vport_destroy+0x110/0x110 [bnx2fc] [ 290.489073] [<ffffffff8109e0cd>] kthread+0xed/0x100 [ 290.489075] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 [ 290.489077] [<ffffffff816b2fec>] ret_from_fork+0x7c/0xb0 [ 290.489078] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 Its due to the fact that we call a potentially sleeping function from the bnx2fc rcv path with preemption disabled (via the get_cpu call embedded in the per-cpu variable stats lookup in bnx2fc_l2_rcv_thread. Easy enough fix, we can just move the stats collection later in the function where we are sure we won't preempt or sleep. This also allows us to not have to enable pre-emption when doing a per-cpu lookup, since we're certain not to get rescheduled. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-25bnx2fc: do not scan uninitialized lists in case of error.Maurizio Lombardi1-0/+2
In case of of error, the bnx2fc_cmd_mgr_alloc() function will call the bnx2fc_cmd_mgr_free() to perform the cleanup. The problem is that in one case the latter may try to scan some not-yet initialized lists, resulting in a kernel panic. This patch prevents this from happening by freeing the lists before calling bnx2fc_cmd_mgr_free(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-09Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-27/+37
Pull SCSI updates from James Bottomley: "This patch consists of the usual driver updates (qla2xxx, qla4xxx, lpfc, be2iscsi, fnic, ufs, NCR5380) The NCR5380 is the addition to maintained status of a long neglected driver for older hardware. In addition there are a lot of minor fixes and cleanups and some more updates to make scsi mq ready" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (130 commits) include/scsi/osd_protocol.h: remove unnecessary __constant mvsas: Recognise device/subsystem 9485/9485 as 88SE9485 Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed" mptfusion: fix msgContext in mptctl_hp_hostinfo acornscsi: remove linked command support scsi/NCR5380: dprintk macro fusion: Remove use of DEF_SCSI_QCMD fusion: Add free msg frames to the head, not tail of list mpt2sas: Add free smids to the head, not tail of list mpt2sas: Remove use of DEF_SCSI_QCMD mpt2sas: Remove uses of serial_number mpt3sas: Remove use of DEF_SCSI_QCMD mpt3sas: Remove uses of serial_number qla2xxx: Use kmemdup instead of kmalloc + memcpy qla4xxx: Use kmemdup instead of kmalloc + memcpy qla2xxx: fix incorrect debug printk be2iscsi: Bump the driver version be2iscsi: Fix processing cqe for cxn whose endpoint is freed be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed be2iscsi: Fix memory corruption in MBX path ...
2014-05-19bnx2fc: fix memory leak in bnx2fc_allocate_hash_table()Maurizio Lombardi1-12/+19
In case of error, the bnx2fc_allocate_hash_table() didn't free all the memory it allocated. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19bnx2fc: fix memory leak and potential NULL pointer dereference.Maurizio Lombardi1-14/+20
If bnx2fc_allocate_hash_table() for some reasons fails, it is possible that the hash_tbl_segments or the hash_tbl_pbl pointers are NULL. In this case bnx2fc_free_hash_table() will panic the system. this patch also fixes a memory leak, the hash_tbl_segments pointer was never freed. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19bnx2fc: remove unused variable hash_table_sizeMaurizio Lombardi1-3/+0
hash_table_size is not used by the bnx2fc_free_hash_table() function. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-07Merge branch 'sched/urgent' into sched/core, to avoid conflictsIngo Molnar1-2/+10
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18sched, treewide: Replace hardcoded nice values with MIN_NICE/MAX_NICEDongsheng Yang1-2/+2
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com Cc: devel@driverdev.osuosl.org Cc: devicetree@vger.kernel.org Cc: fcoe-devel@open-fcoe.org Cc: linux390@de.ibm.com Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: nbd-general@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: openipmi-developer@lists.sourceforge.net Cc: qla2xxx-upstream@qlogic.com Cc: linux-arch@vger.kernel.org [ Consolidated the patches, twiddled the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-2/+10
Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-01Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-3/+28
Pull first round of SCSI updates from James Bottomley: "This patch consists of the usual driver updates (megaraid_sas, scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of minor fixes and the first precursors of SCSI-MQ (the code path simplifications) and the bug fix for the USB oops on remove (which involves an infrastructure change, so is sent via the main tree with a delayed backport after a cycle in which it is shown to introduce no new bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits) [SCSI] sd: Quiesce mode sense error messages [SCSI] add support for per-host cmd pools [SCSI] simplify command allocation and freeing a bit [SCSI] megaraid: simplify internal command handling [SCSI] ses: Use vpd information from scsi_device [SCSI] Add EVPD page 0x83 and 0x80 to sysfs [SCSI] Return VPD page length in scsi_vpd_inquiry() [SCSI] scsi_sysfs: Implement 'is_visible' callback [SCSI] hpsa: update driver version to 3.4.4-1 [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures. [SCSI] bfa: Replace large udelay() with mdelay() [SCSI] vmw_pvscsi: Some improvements in pvscsi driver. [SCSI] vmw_pvscsi: Add support for I/O requests coalescing. [SCSI] vmw_pvscsi: Fix pvscsi_abort() function. [SCSI] remove deprecated IRQF_DISABLED from SCSI [SCSI] bfa: Updating Maintainers email ids [SCSI] ipr: Add new CCIN definition for Grand Canyon support [SCSI] ipr: Format HCAM overlay ID 0x21 [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range() ...
2014-03-20scsi, bnx2fc: Fix CPU hotplug callback registrationSrivatsa S. Bhat1-2/+10
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the bnx2fc code in scsi by using this latter form of callback registration. Cc: Eddie Wai <eddie.wai@broadcom.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-18cnic,bnx2i,bnx2fc: Fix inconsistent use of page sizeMichael Chan2-25/+29
The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15[SCSI] bnx2fc: Updated version to 2.4.2Eddie Wai2-2/+2
Old version: 2.4.1 New version: 2.4.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] bnx2fc: Fixed the handling for the SCSI retry delayEddie Wai3-1/+20
SCSI retry delay upon SAM_STAT_BUSY/_SET_FULL was not being handled in bnx2fc. This patch adds such handling by returning TARGET_BUSY to the SCSI ML for the corresponding LUN until the retry timer expires. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] bnx2fc: Fixed scsi_remove_target soft lockup when rmmod bnx2xEddie Wai1-0/+6
The problem has been identified to be a change in the scsi_remove_device path where a call to the pm_runtime_set_memalloc_noio was added when del_gendisk is called in this path. Note that the new pm routine attempts to cycle through all parent devices from the FC target device to set the memalloc_noio flag. Because of this new change, a dependency was created between the FC target device and the parent netdev device in the destroy path. In order to synchronized the destroy paths, bnx2fc has been modified to flush all destroy workqueues in the NETDEV_UNREGISTER return path. [ 4.123584] BUG: soft lockup - CPU#8 stuck for 22s! [kworker/8:3:8082] [ 4.123713] Call Trace: [ 4.123719] [<ffffffff815dfbe0>] klist_next+0x20/0xf0 [ 4.123725] [<ffffffff813e9220>] ? pm_save_wakeup_count+0x70/0x70 [ 4.123731] [<ffffffff813d9e4e>] device_for_each_child+0x4e/0x70 [ 4.123735] [<ffffffff813e9554>] pm_runtime_set_memalloc_noio+0x94/0xf0 [ 4.123740] [<ffffffff812d4d74>] del_gendisk+0x264/0x2a0 [ 4.123747] [<ffffffffa00c6dc9>] sd_remove+0x69/0xb0 [sd_mod] [ 4.123751] [<ffffffff813de24f>] __device_release_driver+0x7f/0xf0 [ 4.123754] [<ffffffff813de2e3>] device_release_driver+0x23/0x30 [ 4.123757] [<ffffffff813ddab4>] bus_remove_device+0xf4/0x170 [ 4.123760] [<ffffffff813da475>] device_del+0x135/0x1d0 [ 4.123765] [<ffffffff81411b75>] __scsi_remove_device+0xc5/0xd0 [ 4.123768] [<ffffffff81411ba6>] scsi_remove_device+0x26/0x40 [ 4.123770] [<ffffffff81411d40>] scsi_remove_target+0x160/0x210 [ 4.123775] [<ffffffffa0420e4c>] fc_rport_final_delete+0xac/0x1f0 [scsi_transport_fc] [ 4.123780] [<ffffffff810774ab>] process_one_work+0x17b/0x460 [ 4.123783] [<ffffffff8107825b>] worker_thread+0x11b/0x400 [ 4.123786] [<ffffffff81078140>] ? rescuer_thread+0x3e0/0x3e0 [ 4.123791] [<ffffffff8107e9c0>] kthread+0xc0/0xd0 [ 4.123794] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 [ 4.123798] [<ffffffff8160ceec>] ret_from_fork+0x7c/0xb0 [ 4.123801] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-10Merge tag 'fcoe-3.13' into for-linusJames Bottomley1-2/+2
Pull Request for 3.13 for FCOE tree. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] bnx2fc: Bump version from 1.0.14 to 2.4.1Eddie Wai2-2/+2
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] BNX2FC: hung task timeout warning observed when rmmod bnx2x with active FCoE targetsEddie Wai1-15/+44
[v2] - removed the interface->enabled flag setting which prevented the fcoe ctlr link from being brought back up after a MTU change A rtnl_lock deadlock was observed from the rmmod thread where it tries to unregister the fcoe_ctlr device. This unregistration triggered a flush of the sysfs queue of the associated ctlr and led to a call to the set_fcoe_ctlr_enabled routine. This will eventually propagate down to call the bnx2fc_disable routine and contented for the rtnl_lock in the same context. This patch creates a subset of the bnx2fc_enable/disable routine which removes the unnecesary rtnl_lock and the bnx2fc_dev_lock acquisition from the set_fcoe_ctlr_enabled path. kernel: INFO: task rmmod:7874 blocked for more than 120 seconds. kernel: Tainted: G W --------------- 2.6.32-415.0.1.el6.x86_64 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: rmmod D 000000000000000f 0 7874 6518 0x00000080 kernel: ffff88022158f7d8 0000000000000086 0000000000000000 0000000000000000 kernel: ffff88023fe72600 ffff88043c74d410 ffff88043c74d400 ffff88043c74d000 kernel: ffff88021ecbe5f8 ffff88022158ffd8 000000000000fbc8 ffff88021ecbe5f8 kernel: Call Trace: kernel: [<ffffffff81525985>] schedule_timeout+0x215/0x2e0 kernel: [<ffffffff810680c0>] ? pick_next_task_fair+0xd0/0x130 kernel: [<ffffffff81524858>] ? schedule+0x178/0x3b2 kernel: [<ffffffff81525603>] wait_for_common+0x123/0x180 kernel: [<ffffffff81066b40>] ? default_wake_function+0x0/0x20 kernel: [<ffffffff811a486e>] ? ifind_fast+0x5e/0xb0 kernel: [<ffffffff8152571d>] wait_for_completion+0x1d/0x20 kernel: [<ffffffff81203868>] sysfs_addrm_finish+0x228/0x270 kernel: [<ffffffff812014ab>] sysfs_hash_and_remove+0x5b/0x90 kernel: [<ffffffff812056af>] sysfs_remove_group+0x5f/0x100 kernel: [<ffffffff81367e8b>] device_remove_groups+0x3b/0x60 kernel: [<ffffffff8136811d>] device_remove_attrs+0x3d/0x90 kernel: [<ffffffff81368295>] device_del+0x125/0x1e0 kernel: [<ffffffff81368372>] device_unregister+0x22/0x60 kernel: [<ffffffffa038ead2>] fcoe_ctlr_device_delete+0xe2/0xf4 [libfcoe] kernel: [<ffffffffa03c43cb>] bnx2fc_interface_release+0x5b/0x90 [bnx2fc] kernel: [<ffffffffa03c4370>] ? bnx2fc_interface_release+0x0/0x90 [bnx2fc] kernel: [<ffffffff812835e7>] kref_put+0x37/0x70 kernel: [<ffffffffa03c4192>] __bnx2fc_destroy+0x72/0xa0 [bnx2fc] kernel: [<ffffffffa03c5265>] bnx2fc_ulp_exit+0xf5/0x160 [bnx2fc] <- got bnx2fc_dev_lock mutex_lock kernel: [<ffffffffa03b03c6>] cnic_ulp_exit+0xb6/0xc0 [cnic] kernel: [<ffffffffa03b5418>] cnic_netdev_event+0x368/0x370 [cnic] kernel: [<ffffffffa038c56c>] ? fcoe_del_netdev_mapping+0x8c/0xa0 [libfcoe] kernel: [<ffffffff8152a6e5>] notifier_call_chain+0x55/0x80 kernel: [<ffffffff810a0a46>] raw_notifier_call_chain+0x16/0x20 kernel: [<ffffffff81459beb>] call_netdevice_notifiers+0x1b/0x20 kernel: [<ffffffff8145ab34>] rollback_registered_many+0x154/0x280 kernel: [<ffffffff8145ad08>] rollback_registered+0x38/0x50 kernel: [<ffffffff8145ad78>] unregister_netdevice_queue+0x58/0xa0 kernel: [<ffffffff8145add0>] unregister_netdevice+0x10/0x20 kernel: [<ffffffff8145adfe>] unregister_netdev+0x1e/0x30 <- got rtnl_lock!!!!!!!!! kernel: [<ffffffffa0122278>] __bnx2x_remove+0x48/0x270 [bnx2x] <- got & rel rtnl_lock kernel: [<ffffffffa0122554>] bnx2x_remove_one+0x44/0x80 [bnx2x] kernel: [<ffffffff812a3af7>] pci_device_remove+0x37/0x70 kernel: [<ffffffff8136b2ef>] __device_release_driver+0x6f/0xe0 kernel: [<ffffffff8136b428>] driver_detach+0xc8/0xd0 kernel: [<ffffffff8136a22e>] bus_remove_driver+0x8e/0x110 kernel: [<ffffffff8136bc12>] driver_unregister+0x62/0xa0 kernel: [<ffffffff812a3e04>] pci_unregister_driver+0x44/0xb0 kernel: [<ffffffffa0191954>] bnx2x_cleanup+0x18/0x73 [bnx2x] kernel: [<ffffffff810b8be4>] sys_delete_module+0x194/0x260 kernel: [<ffffffff810e1347>] ? audit_syscall_entry+0x1d7/0x200 kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.