aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/device_handler (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-17Merge branch 'fixes' into miscJames Bottomley1-0/+1
2016-05-10scsi_dh_alua: do not fail for unknown VPD identificationHannes Reinecke1-8/+17
Not every device will return a useable VPD identification, but still might support ALUA. Rather than disable ALUA support we should be allowing the device identification to be empty and attach individual ALUA device handler to each devices. [mkp: Fixed typo reported by Bart] Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_dh_alua: uninitialized variable in alua_rtpg()Dan Carpenter1-0/+1
It's possible to use "err" without initializing it. If it happens to be a 2 which is SCSI_DH_RETRY then that could cause a bug. Bart Van Assche pointed out that we should probably re-initialize it for every iteration through the retry loop. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
2016-04-15scsi_dh_alua: Declare local functions staticBart Van Assche1-4/+4
This patch avoids that building with W=1 causes gcc to report the following type of warning: no previous prototype for ... [-Wmissing-prototypes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-29scsi_dh_alua: Fix a recently introduced deadlockBart Van Assche1-2/+2
While retesting the SRP initiator I ran the command "rmmod mlx4_ib" while I/O was in progress. That command triggers SCSI device removal indirectly. Avoid that this action triggers the following deadlock: ================================= [ INFO: inconsistent lock state ] 4.6.0-rc0-dbg+ #2 Tainted: G O --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. multipathd/484 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&pg->lock)->rlock){+.?...}, at: [<ffffffffa04f50a2>] alua_bus_detach+0x52/0xa0 [scsi_dh_alua] {IN-SOFTIRQ-W} state was registered at: [<ffffffff810a64a9>] __lock_acquire+0x7e9/0x1ad0 [<ffffffff810a7fd0>] lock_acquire+0x60/0x80 [<ffffffff8159910e>] _raw_spin_lock_irqsave+0x3e/0x60 [<ffffffffa04f5131>] alua_rtpg_queue+0x41/0x1d0 [scsi_dh_alua] [<ffffffffa04f5531>] alua_check+0xe1/0x220 [scsi_dh_alua] [<ffffffffa04f5709>] alua_check_sense+0x99/0xb0 [scsi_dh_alua] [<ffffffff813f0d01>] scsi_check_sense+0x71/0x3f0 [<ffffffff813f2f8b>] scsi_decide_disposition+0x18b/0x1d0 [<ffffffff813f6e52>] scsi_softirq_done+0x52/0x140 [<ffffffff812a26f2>] blk_done_softirq+0x52/0x90 [<ffffffff8105bc1f>] __do_softirq+0x10f/0x230 [<ffffffff8105bec8>] irq_exit+0xa8/0xb0 [<ffffffff8101a675>] do_IRQ+0x65/0x110 [<ffffffff8159a2c9>] ret_from_intr+0x0/0x19 [<ffffffff811732f1>] kmem_cache_alloc+0x151/0x190 [<ffffffff8118e534>] create_object+0x34/0x2d0 [<ffffffff8158eaa6>] kmemleak_alloc_percpu+0x56/0xd0 [<ffffffff8113ab0d>] pcpu_alloc+0x38d/0x660 [<ffffffff8113aded>] __alloc_percpu_gfp+0xd/0x10 [<ffffffff812e56a5>] __percpu_counter_init+0x55/0xb0 [<ffffffff812b4989>] blkg_alloc+0x79/0x230 [<ffffffff812b6756>] blkcg_init_queue+0x26/0x1d0 [<ffffffff81297eed>] blk_alloc_queue_node+0x27d/0x2e0 [<ffffffffa017766c>] dm_create+0x20c/0x570 [dm_mod] [<ffffffffa017e356>] dev_create+0x56/0x2c0 [dm_mod] [<ffffffffa017dcae>] ctl_ioctl+0x26e/0x520 [dm_mod] [<ffffffffa017df6e>] dm_ctl_ioctl+0xe/0x20 [dm_mod] [<ffffffff811aa8ee>] do_vfs_ioctl+0x8e/0x660 [<ffffffff811aaefc>] SyS_ioctl+0x3c/0x70 [<ffffffff81599929>] entry_SYSCALL_64_fastpath+0x1c/0xac irq event stamp: 4290931 hardirqs last enabled at (4290931): [ 1662.892772] [<ffffffff81599341>] _raw_spin_unlock_irqrestore+0x31/0x50 hardirqs last disabled at (4290930): [<ffffffff815990e7>] _raw_spin_lock_irqsave+0x17/0x60 softirqs last enabled at (4290774): [<ffffffff8105bcdb>] __do_softirq+0x1cb/0x230 softirqs last disabled at (4289831): [<ffffffff8105bec8>] irq_exit+0xa8/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&pg->lock)->rlock); <Interrupt> lock(&(&pg->lock)->rlock); *** DEADLOCK *** 2 locks held by multipathd/484: #0: (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811d1cc3>] __blkdev_put+0x33/0x360 #1: (sd_ref_mutex){+.+...}, at: [<ffffffff81400afc>] scsi_disk_put+0x1c/0x40 stack backtrace: CPU: 6 PID: 484 Comm: multipathd Tainted: G O 4.6.0-rc0-dbg+ #2 Call Trace: [<ffffffff812bd115>] dump_stack+0x67/0x92 [<ffffffff810a5175>] print_usage_bug+0x215/0x240 [<ffffffff810a56ea>] mark_lock+0x54a/0x610 [<ffffffff810a6505>] __lock_acquire+0x845/0x1ad0 [<ffffffff810a7fd0>] lock_acquire+0x60/0x80 [<ffffffff81598f23>] _raw_spin_lock+0x33/0x50 [<ffffffffa04f50a2>] alua_bus_detach+0x52/0xa0 [scsi_dh_alua] [<ffffffff813ff6f7>] scsi_dh_release_device+0x17/0x50 [<ffffffff813fb8da>] scsi_device_dev_release_usercontext+0x2a/0x120 [<ffffffff810701f0>] execute_in_process_context+0x80/0x90 [<ffffffff813fb8a7>] scsi_device_dev_release+0x17/0x20 [<ffffffff813c8cfd>] device_release+0x2d/0x90 [<ffffffff812bfa8a>] kobject_release+0x7a/0x190 [<ffffffff812bf946>] kobject_put+0x26/0x50 [<ffffffff813c8ee2>] put_device+0x12/0x20 [<ffffffff813edc86>] scsi_device_put+0x26/0x30 [<ffffffff81400b0d>] scsi_disk_put+0x2d/0x40 [<ffffffff81400b68>] sd_release+0x48/0xb0 [<ffffffff811d1f2e>] __blkdev_put+0x29e/0x360 [<ffffffff811d24b9>] blkdev_put+0x49/0x170 [<ffffffff811d2600>] blkdev_close+0x20/0x30 [<ffffffff81198f48>] __fput+0xe8/0x1f0 [<ffffffff81199089>] ____fput+0x9/0x10 [<ffffffff81075d9e>] task_work_run+0x6e/0xa0 [<ffffffff81001119>] exit_to_usermode_loop+0xa9/0xb0 [<ffffffff81001590>] syscall_return_slowpath+0xb0/0xc0 [<ffffffff815999b7>] entry_SYSCALL_64_fastpath+0xaa/0xac Fixes: cb0a168cb6b8 (scsi_dh_alua: update 'access_state' field) Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-14scsi_dh_alua: uninitialized variable in alua_check_vpd()Dan Carpenter1-1/+1
The pg_updated variable is support to be set to false at the start but it is uninitialized. Fixes: cb0a168cb6b8 ('scsi_dh_alua: update 'access_state' field') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-05scsi_dh_emc: update 'access_state' fieldHannes Reinecke1-1/+6
Update the 'access_state' field of the SCSI device whenever the path state changes. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-05scsi_dh_rdac: update 'access_state' fieldHannes Reinecke1-7/+31
Track attached SCSI devices and update the 'access_state' whenever the path state of the device changes. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-05scsi_dh_alua: update 'access_state' fieldHannes Reinecke1-2/+46
Track attached SCSI devices and update the 'access_state' field whenever an ALUA state change has been detected. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-05scsi_dh_alua: use common definitions for ALUA stateHannes Reinecke1-33/+25
scsi_proto.h now contains definitions for the ALUA state, so we don't have to carry them in the device handler. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Update version to 2.0Hannes Reinecke1-1/+1
[mkp: Fixed merge due to patches 20-22 of series being postponed] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh: add 'rescan' callbackHannes Reinecke1-0/+8
If a device needs to be rescanned the device_handler might need to be rechecked, too. So add a 'rescan' callback to the device handler and call it upon scsi_rescan_device(). The rescan callback will be invoked from the Unit Attention handling of ASC/ASCQ 3F 03 (INQUIRY DATA HAS CHANGED). Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Send TEST UNIT READY to poll for transitioningHannes Reinecke1-0/+38
Sending a 'REPORT TARGET PORT GROUP' command is a costly operation, as the array has to gather information about all ports. So instead of using RTPG to poll for a status update when a port is in transitioning we should be sending a TEST UNIT READY, and wait for the sense code to report success. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: update all port statesHannes Reinecke1-9/+26
When we read in the target port group state we should be updating all affected port groups, otherwise we risk running out of sync. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Recheck state on unit attentionHannes Reinecke1-12/+55
When we receive a unit attention code of 'ALUA state changed' we should recheck the state, as it might be due to an implicit ALUA state transition. This allows us to return NEEDS_RETRY instead of ADD_TO_MLQUEUE, allowing to terminate the retries after a certain time. At the same time a workqueue item might already be queued, which should be started immediately to avoid any delays. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'Hannes Reinecke1-0/+2
Add a new blacklist flag BLIST_SYNC_ALUA to instruct the alua device handler to use synchronous command submission for ALUA commands. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Allow workqueue to run synchronouslyHannes Reinecke1-3/+18
Some arrays may only capable of handling one STPG at a time, so this patch adds a singlethreaded workqueue for STPGs to be submitted synchronously. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Use workqueue for RTPGHannes Reinecke1-54/+242
The current ALUA device_handler has two drawbacks: - We're sending a 'SET TARGET PORT GROUP' command to every LUN, disregarding the fact that several LUNs might be in a port group and will be automatically switched whenever _any_ LUN within that port group receives the command. - Whenever a LUN is in 'transitioning' mode we cannot block I/O to that LUN, instead the controller has to abort the command. This leads to increased traffic across the wire and heavy load on the controller during switchover. With this patch the RTPG handling is moved to a per-portgroup workqueue. This reduces the number of 'REPORT TARGET PORT GROUP' and 'SET TARGET PORT GROUPS' sent to the controller as we're sending them now per port group, and not per device as previously. It also allows us to block I/O to any LUN / port group found to be in 'transitioning' ALUA mode, as the workqueue item will be requeued until the controller moves out of transitioning. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: remove 'rel_port' from alua_dh_data structureHannes Reinecke1-5/+1
The 'relative port' field is not used, and might get stale when the port group changes. So remove the field altogether. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: move optimize_stpg evaluationHannes Reinecke1-7/+6
When the optimize_stpg module option is set we should just set it once during port_group allocation. Doing so allows us to override it later with device specific settings. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23revert commit a8e5a2d593cb ("[SCSI] scsi_dh_alua: ALUA handler attach should succeed while TPG is transitioning")Hannes Reinecke1-19/+12
This reverts commit a8e5a2d593cbfccf530c3382c2c328d2edaa7b66 Obsoleted by the next patch. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: simplify alua_initialize()Hannes Reinecke1-21/+17
Rework alua_check_vpd() to use scsi_vpd_get_tpg() and move the port group selection into the function, too. With that we can simplify alua_initialize() to just call alua_check_tpgs() and alua_check_vpd(); Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: use unique device idHannes Reinecke1-5/+50
Use scsi_vpd_lun_id() to assign a unique device identification to the alua port group structure. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Use separate alua_port_group structureHannes Reinecke1-53/+128
The port group needs to be a separate structure as several LUNs might belong to the same group. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: allocate RTPG buffer separatelyHannes Reinecke1-34/+23
The RTPG buffer will only evaluated within alua_rtpg(), so we can allocate it locally there and avoid having to put it into the global structure. Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: switch to scsi_execute_req_flags()Hannes Reinecke1-89/+36
All commands are issued synchronously, so no need to open-code scsi_execute_req_flags() anymore. And we can get rid of the static sense code structure element. scsi_execute_req_flags() will be setting REQ_QUIET and REQ_PREEMPT, but that is perfectly fine as we're evaluating and logging any errors ourselves and we really need to send the command even if the device is quiesced. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: call alua_rtpg() if stpg failsHannes Reinecke1-0/+2
If the call to SET TARGET PORT GROUPS fails we have no idea what state the array is left in, so we need to issue a call to REPORT TARGET PORT GROUPS in these cases. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Make stpg synchronousHannes Reinecke1-104/+54
The 'activate_complete' function needs to be executed after stpg has finished, so we can as well execute stpg synchronously and call the function directly. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: separate out alua_stpg()Hannes Reinecke1-34/+61
Separate out SET TARGET PORT GROUP functionality into a separate function alua_stpg(). Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Pass buffer as function argumentHannes Reinecke1-6/+7
Pass in the buffer as a function argument for submit_rtpg(). Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh: force modular build if SCSI is a moduleArnd Bergmann1-4/+4
When the scsi_dh core was moved into the scsi core module, CONFIG_SCSI_DH became a 'bool' option, and now anything depending on it can be built-in even when CONFIG_SCSI=m. This of course cannot link successfully: drivers/scsi/built-in.o: In function `rdac_init': scsi_dh_alua.c:(.init.text+0x14): undefined reference to `scsi_register_device_handler' scsi_dh_alua.c:(.init.text+0x64): undefined reference to `scsi_unregister_device_handler' drivers/scsi/built-in.o: In function `alua_init': scsi_dh_alua.c:(.init.text+0xb0): undefined reference to `scsi_register_device_handler' As a workaround, this adds an extra dependency on CONFIG_SCSI, so Kconfig can figure out whether built-in is allowed or not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-04scsi_dh_rdac: always retry MODE SELECT on command lock violationHannes Reinecke1-1/+3
If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-07scsi_dh_alua: Remove stale variablesHannes Reinecke1-2/+0
With commit 83ea0e5e3501 ("scsi_dh_alua: use scsi_vpd_tpg_id()") these variables became obsolete, but weren't removed. [mkp: Fixed checkpatch warning] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: use scsi_vpd_tpg_id()Hannes Reinecke1-31/+6
Use the common function 'scsi_vpd_tpg_id()' instead of open-coding it in scsi_dh_alua. [mkp: Applied by hand] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: simplify sense code handlingHannes Reinecke1-28/+17
Most sense code is already handled in the generic code, so we shouldn't be adding special cases here. However, when doing so we need to check for unit attention whenever we're sending an internal command. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: rework alua_check_tpgs() to return the tpgs modeHannes Reinecke1-14/+11
Instead of returning an error code in alua_check_tpgs() we should rather return the tpgs mode directly and have a cleaner syntax. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: use unaligned access macrosHannes Reinecke1-15/+8
Use 'get_unaligned_XX' and 'put_unaligned_XX' instead of open-coding it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: use flag for RTPG extended headerHannes Reinecke1-8/+7
We should be using a flag when RTPG extended header is not supported, that saves us sending RTPG twice for older arrays. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: fixup description of stpg_endio()Hannes Reinecke1-4/+2
Fixup copy-and-paste error in the description of stpg_endio(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: return standard SCSI return codes in submit_rtpgHannes Reinecke1-16/+17
Fixup submit_rtpg() to always return a standard SCSI return code. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: use standard logging functionsHannes Reinecke1-14/+13
Use standard logging functions instead of hand-crafted ones. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: sanitze sense code handlingHannes Reinecke1-11/+7
The only check for a valid sense code is calling scsi_normalize_sense() and check the return value. So drop the pointless checks and rely on scsi_normalize_sense() to figure out if the sense code is valid. With that we can also remove the 'senselen' field. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com> Reviewed-by: Bart van Assche <bvanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: improved loggingHannes Reinecke1-2/+8
Issue different logging messages if ALUA is not supported or the TPGS setting is invalid. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: Use vpd_pg83 informationHannes Reinecke1-69/+18
The SCSI device now has the VPD page 0x83 information attached, so there is no need to query it again. [mkp: Fixed a checkpatch warning] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-02scsi_dh_alua: Disable ALUA handling for non-disk devicesHannes Reinecke1-0/+12
Non-disk devices might support ALUA, but the firmware implementation is untested and frequently broken. As we're don't actually need it disable ALUA support for non-disk device for now. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-28scsi_dh: kill struct scsi_dh_dataChristoph Hellwig4-65/+44
Add a ->handler and a ->handler_data field to struct scsi_device and kill this indirection. Also move struct scsi_device_handler to scsi_dh.h so that changes to it don't require rebuilding every SCSI LLDD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move device matching to the core codeChristoph Hellwig4-115/+0
Add a single list of devices that need non-ALUA device handlers to the core scsi_dh code so that we can autoload the modules for them at probe time. While this is a little ugly in terms of architecture it actually significantly simplifies the code in addition to the new autoloading functionality. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: integrate into the core SCSI codeChristoph Hellwig2-2/+1
Stop building scsi_dh as a separate module and integrate it fully into the core SCSI code with explicit callouts at bus scan time. For now the callouts are placed at the same point as the old bus notifiers were called, but in the future we will be able to look at ALUA INQUIRY data earlier on. Note that this also means that the device handler modules need to be loaded by the time we scan the bus. The next patches will add support for autoloading device handlers at bus scan time to make sure they are always loaded if they are enabled in the kernel config. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28scsi_dh: move to drivers/scsiChristoph Hellwig1-571/+0
Prepare for building scsi_dh.c into the core SCSI module by moving it to drivers/scsi. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-28dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpathChristoph Hellwig1-17/+19
This way we can reused the same code any attachment method, not just those requested from dm-mpath. [jejb: fixup checkpatch error] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.