aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hosts.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-06-21fix race that can give duplicate host numberJoe Eykholt1-2/+6
Just once, two fcoe instances got the same host number from scsi_add_host(). Use atomic_t and atomic_inc_return() to get next host number. Subtract 1, so that scsi_host still starts with 0. [jejb: added comment about unusual subtraction] Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-12[SCSI] fix /proc memory leak in the SCSI coreAlan Stern1-1/+2
The SCSI core calls scsi_proc_hostdir_add() from within scsi_host_alloc(), but the corresponding scsi_proc_hostdir_rm() routine is called from within scsi_remove_host(). As a result, if a host is allocated and then deallocated without ever being registered, the host's directory in /proc is leaked. This patch (as1181b) fixes this bug in the SCSI core by moving scsi_proc_hostdir_rm() into scsi_host_dev_release(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02[SCSI] struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-4/+2
[jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03[SCSI] scsi_host_lookup: error returns and NULL pointersJames Smart1-1/+1
This patch cleans up the behavior of scsi_host_lookup(). The original implementation attempted to use the dual role of either returning a pointer value, or a negative error code. User's needed to use IS_ERR() to check the result. Additionally, the IS_ERR() macro never checks for when a NULL pointer was returned, so a NULL pointer actually passes with a success case. Note: scsi_host_get(), used by scsi_host_lookup(), can return a NULL pointer. Talk about a mudhole for the unitiated to step into.... This patch converts scsi_host_lookup() to return either NULL or a valid pointer. The consumers were updated for the change. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-21driver core: remove KOBJ_NAME_LEN defineKay Sievers1-2/+2
Kobjects do not have a limit in name size since a while, so stop pretending that they do. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21Driver Core: add ability for class_find_device to start in middle of listGreg Kroah-Hartman1-1/+2
This mirrors the functionality that driver_find_device has as well. We add a start variable, and all callers of the function are fixed up at the same time. The block layer will be using this new functionality in a follow-on patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits) [SCSI] scsi_dh: fix kconfig related build errors [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h [SCSI] make struct scsi_{host,target}_type static [SCSI] fix locking in host use of blk_plug_device() [SCSI] zfcp: Cleanup external header file [SCSI] zfcp: Cleanup code in zfcp_erp.c [SCSI] zfcp: zfcp_fsf cleanup. [SCSI] zfcp: consolidate sysfs things into one file. [SCSI] zfcp: Cleanup of code in zfcp_aux.c [SCSI] zfcp: Cleanup of code in zfcp_scsi.c [SCSI] zfcp: Move status accessors from zfcp to SCSI include file. [SCSI] zfcp: Small QDIO cleanups [SCSI] zfcp: Adapter reopen for large number of unsolicited status [SCSI] zfcp: Fix error checking for ELS ADISC requests [SCSI] zfcp: wait until adapter is finished with ERP during auto-port [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver [SCSI] sg: Add target reset support [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC [SCSI] sd: Move scsi_disk() accessor function to sd.h ...
2008-07-12[SCSI] make struct scsi_{host,target}_type staticAdrian Bunk1-1/+1
Make the needlessly global struct scsi_{host,target}_type static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-15[SCSI] scsi_host regression: fix scsi host leakMike Christie1-2/+7
commit 9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7 Author: Dave Young <hidave.darkstar@gmail.com> Date: Tue Jan 22 14:01:34 2008 +0800 scsi: use class iteration api Isn't a correct replacement for the original hand rolled host lookup. The problem is that class_find_child would get a reference to the host's class device which is never released. Since the host class device holds a reference to the host gendev, the host can never be freed. In 2.6.26 we started using class_find_device, and this function also gets a reference to the device, so we end up with an extra ref and the host will not get released. This patch adds a put_device to balance the class_find_device() get. I kept the scsi_host_get in scsi_host_lookup, because the target layer is using scsi_host_lookup and it looks like it needs the SHOST_DEL check. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-27[SCSI] fix SLUB WARN_ONJames Bottomley1-8/+8
We're getting a WARN_ON from SLUB indicating that we're trying to free caches with in-use objects. The root cause is a new dependency in the command/sense free on unchecked_isa_dma. The WARN_ON is caused by drivers which change this in their setup after the command/sense cache is allocated. The fix is to move the allocation of this cache into scsi_add_host() so things like gdth have an opportunity to modify it between alloc and add (but *not* after). The true fix would be to move unchecked_isa_dma into the template and out of the host, so it because a truly read only variable. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-22[SCSI] use default attributes for scsi_hostHannes Reinecke1-0/+1
This patch removes the unused sysfs attibute overwriting logic for the scsi host attibutes, and plugs them into the driver core default attribute creation. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-22[SCSI] add scsi_host and scsi_target to scsi_busHannes Reinecke1-2/+10
This patch implements scsi_host and scsi_target device types and adds both to the scsi_bus. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones1-17/+17
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-07[SCSI] hosts.c: removed one unneeded shost->active_mode assignmentDenis Cheng1-1/+0
In the following if/else statement, shost->active_mode will always be set, so this assignment is unneeded. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-27[SCSI] hosts.c: fixes for "no error" reported after error scenariosJames Smart1-5/+11
This patch corrects some cases in scsi_add_host() that fail, but the "error" return code was not reset after a prior use which set it to a non-error value. Patch cut against scsi-rc-fixes-2.6 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30[SCSI] remove use_sg_chainingJames Bottomley1-1/+0
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-3/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-24scsi: use class iteration apiDave Young1-11/+13
Convert to use the class iteration api. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23[SCSI] don't use __GFP_DMA for sense buffers if not requiredJames Bottomley1-8/+1
Only hosts which actually have ISA DMA requirements need sense buffers coming out of ZONE_DMA, so only use the __GFP_DMA flag for that case to avoid allocating this scarce resource if it's not necessary. [tomo: fixed slab leak in failure case] Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] use dynamically allocated sense bufferFUJITA Tomonori1-1/+8
This removes static array sense_buffer in scsi_cmnd and uses dynamically allocated sense_buffer (with GFP_DMA). The reason for doing this is that some architectures need cacheline aligned buffer for DMA: http://lkml.org/lkml/2007/11/19/2 The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves these issues. __scsi_get_command allocates sense_buffer via kmem_cache_alloc and attaches it to a scsi_cmnd so everything just work as before. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] Add Documentation and integrate into docbook buildRob Landley1-3/+1
Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-17[SCSI] make supported_mode default to initiator.James Bottomley1-0/+6
if shost->supported mode is zero (i.e. MODE_UNKNOWN) show it as initiator (it's obviously an unconverted driver that won't do target). Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-16[SCSI] add use_sg_chaining option to scsi_host_templateFUJITA Tomonori1-0/+1
This option is true if a low-level driver can support sg chaining. This will be removed eventually when all the drivers are converted to support sg chaining. q->max_phys_segments is set to SCSI_MAX_SG_SEGMENTS if false. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12[SCSI] add supported_mode and active_mode attributes to the hostFUJITA Tomonori1-0/+1
This adds supported_mode and active_mode attributes to /sys/class/sys_host/hostX/ for specifying the mode that a lld supports and the currently activated mode. The output format is similar to fc rport roles: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator luce:/sys/class/scsi_host/host0$ cat active_mode Initiator The mode values uses bitmap since we would support dual-mode llds in the future like this: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator, Target The supported_mode attribute looks at a scsi_host_template and the active_mode attribute looks at a scsi_host. We would add a hook to a scsi_host_template to change the active_mode attribute dynamically. But now there is no hook since no lld supports that feature. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] initialize shost_data to zeroFUJITA Tomonori1-1/+1
It's better to initialize host->shost_data to zero like target->starget_data and device->sdev_data. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-27SCSI: use the proper semaphore to protect the class listsGreg Kroah-Hartman1-2/+2
SCSI was using the incorrect lock to protect walking the list of all devices in the class. This patch fixes this. Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-25[SCSI] export scsi-ml functions needed by tgt_scsi_lib and its LLDsFUJITA Tomonori1-0/+4
This patch contains the needed changes to the scsi-ml for the target mode support. Note, per the last review we moved almost all the fields we added to the scsi_cmnd to our internal data structure which we are going to try and kill off when we can replace it with support from other parts of the kernel. The one field we left on was the offset variable. This is needed to handle the case where the target gets request that is so large that it cannot execute it in one dma operation. So max_secotors or a segment limit may limit the size of the transfer. In this case our tgt core code will break up the command into managable transfers and send them to the LLD one at a time. The offset is then used to tell the LLD where in the command we are at. Is there another field on the scsi_cmd for that? Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15[SCSI] kill scsi_assign_lockChristoph Hellwig1-2/+2
scsi_assign_lock has been unused for a long time and is a bad idea in general, so kill it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-31[SCSI] add shared tag map helpersJames Bottomley1-0/+3
This patch adds support for sharing tag maps at the host level (i.e. either every queue [LUN] has its own tag map or there's a single one for the entire host). This formulation is primarily intended to help single issue queue hardware, like the aic7xxx Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] scsi_queue_work() documented return value is incorrectMichael Reed1-1/+3
If you examine the queue_work() routine you'll see that it returns 1 on success, 0 if the work is already queued. This patch corrects the source code documentation for the scsi_queue_work function. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig1-12/+0
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-27[SCSI] SCSI core kmalloc2kzallocJes Sorensen1-2/+1
Change the core SCSI code to use kzalloc rather than kmalloc+memset where possible. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] turn most scsi semaphores into mutexesArjan van de Ven1-4/+4
the scsi layer is using semaphores in a mutex way, this patch converts these into using mutexes instead Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-06[BLOCK] update SCSI to use new blk_ordered for barriersTejun Heo1-9/+0
All ordered request related stuff delegated to HLD. Midlayer now doens't deal with ordered setting or prepare_flush callback. sd.c updated to deal with blk_queue_ordered setting. Currently, ordered tag isn't used as SCSI midlayer cannot guarantee request ordering. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-11-04Merge by HandJames Bottomley1-5/+5
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and scsi_transport_fc.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King1-0/+1
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[SCSI] move the mid-layer printk's over to shost/starget/sdev_printkJames Bottomley1-5/+5
This should eliminate (at least in the mid layer) to make numeric assumptions about any of the enumeration variables. As a side effect, it will also make all the messages consistent and line us up nicely for the error logging strategy (if it ever shows itself again). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[PATCH] gfp_t: drivers/scsiAl Viro1-1/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-02[SCSI] fix potential panic with proc on module removalJames Bottomley1-1/+1
There's a problem in our host release in that it calls scsi_proc_hostdir_rm(). However, if you hold a reference to the host as you remove the module, the host template (which proc uses) will be freed and the system will panic when the host device is finally released. Fix this by moving scsi_proc_hostdir_rm() to where it should be: in scsi_remove_host(). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fix oops on usb storage device disconnectJames Bottomley1-2/+33
We fix the oops by enforcing the host state model. There have also been two extra states added: SHOST_CANCEL_RECOVERY and SHOST_DEL_RECOVERY so we can take the model through host removal while the recovery thread is active. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] switch EH thread startup to the kthread APIChristoph Hellwig1-15/+8
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: mediate host add/remove raceMike Anderson1-0/+2
Add support to not allow additions to a host when it is being removed. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: reimplement scsi_host_cancelMike Anderson1-17/+1
Remove the old scsi_host_cancel function as it has not been working for sometime do to the device list possibly being empty when it is called and possible race issues. Add setting of SHOST_CANCEL at the state of beginning of scsi_remove_host. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: replace old host bitmap stateMike Anderson1-6/+82
Migrate the current SCSI host state model to a model like SCSI device is using. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig1-5/+0
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-24[PATCH] make various thing staticAdrian Bunk1-1/+1
Another rollup of patches which give various symbols static scope Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+462
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.