aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hpsa.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-16scsi: hpsa: Switch to attribute groupsBart Van Assche1-20/+24
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-22-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: hpsa: Call scsi_done() directlyBart Van Assche1-6/+6
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-37-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-3/+3
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-23-bvanassche@acm.org Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-22scsi: hpsa: Correct dev cmds outstanding for retried cmdsDon Brace1-7/+44
Prevent incrementing device->commands_outstanding for ioaccel command retries that are driver initiated. If the command goes through the retry path, the device->commands_outstanding counter has already accounted for the number of commands outstanding to the device. Only commands going through function hpsa_cmd_resolve_events decrement this counter. - ioaccel commands go to either HBA disks or to logical volumes comprised of SSDs. The extra increment is causing device resets to hang. - Resets wait for all device outstanding commands to complete before returning. Replace unused field abort_pending with retry_pending. This is a maintenance driver so these changes have the least impact/risk. Link: https://lore.kernel.org/r/161342801747.29388.13045495968308188518.stgit@brunhilda Tested-by: Joe Szczypek <jszczype@redhat.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: hpsa: Do not set COMMAND_COMPLETEHannes Reinecke1-3/+1
COMMAND_COMPLETE is defined as '0', and it is a SCSI parallel message to boot. Drop the call to set_msg_byte(). Link: https://lore.kernel.org/r/20210113090500.129644-17-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-24/+14
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ...
2020-11-25scsi: hpsa: Use generic power managementVaibhav Gupta1-5/+7
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-21-vaibhavgupta40@gmail.com Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16scsi: hpsa: Strip out a bunch of set but unused variablesLee Jones1-18/+7
Fixes the following W=1 kernel build warning(s): drivers/scsi/hpsa.c: In function ‘hpsa_volume_offline’: drivers/scsi/hpsa.c:3885:5: warning: variable ‘scsi_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c:3884:6: warning: variable ‘cmd_status’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_update_scsi_devices’: drivers/scsi/hpsa.c:4354:9: warning: variable ‘n_ext_target_devs’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_scatter_gather’: drivers/scsi/hpsa.c:4583:36: warning: variable ‘last_sg’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_init_one’: drivers/scsi/hpsa.c:8639:6: warning: variable ‘dac’ set but not used [-Wunused-but-set-variable] drivers/scsi/hpsa.c: In function ‘hpsa_enter_performant_mode’: drivers/scsi/hpsa.c:9300:7: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20201112101929.GC1997862@dell Cc: Don Brace <don.brace@microchip.com> Cc: Bugfixes to <esc.storagedev@microsemi.com> Cc: storagedev@microchip.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29scsi: hpsa: Fix memory leak in hpsa_init_one()Keita Suzuki1-1/+3
When hpsa_scsi_add_host() fails, h->lastlogicals is leaked since it is missing a free() in the error handler. Fix this by adding free() when hpsa_scsi_add_host() fails. Link: https://lore.kernel.org/r/20201027073125.14229-1-keitasuzuki.park@sslab.ics.keio.ac.jp Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26scsi: Remove unneeded break statementsTom Rix1-1/+0
A break is not needed if it is preceded by a return or goto. Link: https://lore.kernel.org/r/20201019142333.16584-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-8/+9
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-09-02scsi: hpsa: Update copyrightDon Brace1-0/+1
Add entry for Microchip. Link: https://lore.kernel.org/r/159864166227.12131.3427629298809272795.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: hpsa: Remove pci-dma-compat wrapper APISuraj Upadhyay1-8/+8
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as they create unnecessary midlayering for include/linux/dma-mapping.h API. Instead use dma-mapping.h API directly. The patch has been generated with the coccinelle script below. Compile tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Link: https://lore.kernel.org/r/37154a4efe82a58b9bad143608dd9fd37a2c94e5.1596045683.git.usuraj35@gmail.com Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-5/+5
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-28scsi: hpsa: Correct ctrl queue depthDon Brace1-5/+6
Need to set queue depth for controller devices. Link: https://lore.kernel.org/r/159562590819.17915.12766718094041027754.stgit@brunhilda Fixes: 30bda7848a23 ("scsi: hpsa: Increase controller error handling timeout") Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Bump versionDon Brace1-1/+1
Link: https://lore.kernel.org/r/159528198909.24772.9189002306398058371.stgit@brunhilda Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Increase controller error handling timeoutDon Brace1-0/+4
The controller can become slow to respond to SCSI INQUIRY requests resulting in the SCSI midlayer offlining the controller device. Increase the timeout value for commands sent to the controller device. Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: hpsa: Correct rare oob conditionDon Brace1-3/+17
There are some rare conditions where a spare is first in the device list causing an array out-of-bounds condition. Link: https://lore.kernel.org/r/159528197176.24772.14659026352708896249.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-04scsi: hpsa: hpsa_ioctl(): Tidy up a bitAl Viro1-5/+2
Link: https://lore.kernel.org/r/20200529234028.46373-4-viro@ZenIV.linux.org.uk Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-04scsi: hpsa: Get rid of compat_alloc_user_space()Al Viro1-44/+36
No need for building a native struct on kernel stack, copying it to userland one, then calling hpsa_ioctl() which copies it back into _another_ instance of the same struct. Link: https://lore.kernel.org/r/20200529234028.46373-3-viro@ZenIV.linux.org.uk Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-04scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_structAl Viro1-9/+5
"BIG" in the name refers to the amount of data being transferred, _not_ the size of structure itself; it's 140 or 144 bytes (for 32bit and 64bit hosts resp.). IOCTL_Command_struct is 136 or 144 bytes large... No point whatsoever turning that into dynamic allocation, let alone vmalloc one. Just keep it as local variable... Link: https://lore.kernel.org/r/20200529234028.46373-2-viro@ZenIV.linux.org.uk Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-04scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()Al Viro1-60/+56
Link: https://lore.kernel.org/r/20200529234028.46373-1-viro@ZenIV.linux.org.uk Acked-by: Don Brace <don.brace@microsemi.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-26scsi: hpsa: correct race condition in offload enabledDon Brace1-23/+57
Correct race condition where ioaccel is re-enabled before the raid_map is updated. For RAID_1, RAID_1ADM, and RAID 5/6 there is a BUG_ON called which is bad. - Change event thread to disable ioaccel only. Send all requests down the RAID path instead. - Have rescan thread handle offload_enable. - Since there is only one rescan allowed at a time, turning offload_enabled on/off should not be racy. Each handler queues up a rescan if one is already in progress. - For timing diagram, offload_enabled is initially off due to a change (transformation: splitmirror/remirror), ... otbe = offload_to_be_enabled oe = offload_enabled Time Event Rescan Completion Request Worker Worker Thread Thread ---- ------ ------ ---------- ------- T0 | | + UA | T1 | + rescan started | 0x3f | T2 + Event | | 0x0e | T3 + Ack msg | | | T4 | + if (!dev[i]->oe && | | T5 | | dev[i]->otbe) | | T6 | | get_raid_map | | T7 + otbe = 1 | | | T8 | | | | T9 | + oe = otbe | | T10 | | | + ioaccel request T11 * BUG_ON T0 - I/O completion with UA 0x3f 0x0e sets rescan flag. T1 - rescan worker thread starts a rescan. T2 - event comes in T3 - event thread starts and issues "Acknowledge" message ... T6 - rescan thread has bypassed code to reload new raid map. ... T7 - event thread runs and sets offload_to_be_enabled ... T9 - rescan thread turns on offload_enabled. T10- request comes in and goes down ioaccel path. T11- BUG_ON. - After the patch is applied, ioaccel_enabled can only be re-enabled in the re-scan thread. Link: https://lore.kernel.org/r/158472877894.14200.7077843399036368335.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Matt Perricone <matt.perricone@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-10-25Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+4
Pull SCSI fixes from James Bottomley: "Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch, 53c710[x2], target) and one core change that tries to close a race between sysfs delete and module removal" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: remove left-over BUILD_NVME defines scsi: core: try to get module before removing device scsi: hpsa: add missing hunks in reset-patch scsi: target: core: Do not overwrite CDB byte 1 scsi: ch: Make it possible to open a ch device multiple times again scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE scsi: sni_53c710: fix compilation error scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions scsi: qla2xxx: fix a potential NULL pointer dereference
2019-10-17scsi: hpsa: add missing hunks in reset-patchDon Brace1-0/+4
Correct returning from reset before outstanding commands are completed for the device. Link: https://lore.kernel.org/r/157107623870.17997.11208813089704833029.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-23Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+0
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski1-1/+0
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-02Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-3/+11
Pull SCSI fixes from James Bottomley: "Seven fixes to four drivers with no core changes. The mpt3sas one is theoretical until we get a CPU that goes up to 64 bits physical, the qla2xxx one fixes an oops in a driver initialization error leg and the others are mostly cosmetic" [ The fcoe patches may be worth highlighting - they may be "just" cleanups, but they simplify and fix the odd fc_rport_priv structure handling rules so that the new gcc-9 warnings about memset crossing structure boundaries are gone. The old code was hard for humans to understand too, and really confused the compiler sanity checks - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix possible fcport null-pointer dereferences scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA scsi: hpsa: remove printing internal cdb on tag collision scsi: hpsa: correct scsi command status issue after reset scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure scsi: libfc: Whitespace cleanup in libfc.h
2019-07-30scsi: hpsa: remove printing internal cdb on tag collisionDon Brace1-2/+0
Remove racy printing of internal commands. Completion thread can be cleaning up the command in parallel. Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30scsi: hpsa: correct scsi command status issue after resetDon Brace1-1/+11
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-17docs: fix broken doc references due to renamesMauro Carvalho Chehab1-2/+2
Some files got renamed but probably due to some merge conflicts, a few references still point to the old locations. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-111/+169
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-2/+2
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-18scsi: hpsa: fix an uninitialized read and dereference of pointer devColin Ian King1-1/+1
Currently the check for a lockup_detected failure exits via the label return_reset_status that reads and dereferences an uninitialized pointer dev. Fix this by ensuring dev is inintialized to null. Addresses-Coverity: ("Uninitialized pointer read") Fixes: 14991a5bade5 ("scsi: hpsa: correct device resets") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: update driver versionDon Brace1-1/+1
[mkp: wrong baseline, applied by hand] Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: correct device resetsDon Brace1-88/+85
Correct a race condition that occurs between the reset handler and the completion handler. There are times when the wait_event condition is never met due to this race condition and the reset never completes. The reset_pending field is NULL initially. t Reset Handler Thread Completion Thread -- -------------------- ----------------- t1 if (c->reset_pending) t2 c->reset_pending = dev; if (atomic_dev_and_test(counter)) t3 atomic_inc(counter) wait_up_all(event_sync_wait_queue) t4 t5 wait_event(...counter == 0) Kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=1994350 Bug 199435 - HPSA + P420i resetting logical Direct-Access never complete Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: do-not-complete-cmds-for-deleted-devicesDon Brace1-1/+13
Close up a rare multipath issue. Close up small hole where a command completes after a device has been removed from SML and before the device is re-added. - Mark device as removed in slave_destroy - Do not complete commands for deleted devices Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: wait longer for ptraid commandsDon Brace1-6/+20
Wait longer for outstanding commands before removing a multipath device. Increase the timeout value for ptraid commands. Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: check for tag collisionDon Brace1-7/+14
Correct rare multipath issue where a device is deleted with an outstanding cmd which results in a tag collision. The cmd eventually completes. If a collision is detected wait until the command slot is cleared. Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: use local workqueues instead of system workqueuesDon Brace1-3/+19
Avoid system stalls by switching to local workqueue. Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: hpsa: correct simple modeDon Brace1-4/+16
Correct issue with hpsa_simple_mode module parameter. Driver was hanging due to incorrect interrupt setup. Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-08docs: pci: fix broken links due to conversion from pci.txt to pci.rstMauro Carvalho Chehab1-2/+2
Some documentation files were still pointing to the old place. Fixes: 229b4e0728e0 ("Documentation: PCI: convert pci.txt to reST") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-07scsi: hpsa: correct ioaccel2 chainingDon Brace1-1/+6
- set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_LAST_SG for the last s/g element. - set ioaccel2_sg_element member 'chain_indicator' to IOACCEL2_CHAIN when chaining. Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Matt Perricone <matt.perricone@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: hpsa: bump driver versionDon Brace1-1/+1
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: hpsa: remove timeout from TURsDon Brace1-1/+1
There are times when a TUR can take longer than the DEFAULT_TIMEOUT value. The timeout code is not correct as the function exits with an automatic as the completion variable...To be fixed later. Remove the TUR timeout. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: hpsa: correct device id issuesDon Brace1-3/+7
Correct a 'rare' race condition where a disk is failed after a device list has been obtained from the controller and before attempting to get the device id. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-18scsi: hpsa: check for lv removalDon Brace1-1/+12
Multipath failures are normally detected at the frequency of the event thread. Detect LUN failures earlier by checking request completion status. Reviewed-by: Bader Ali-saleh <bader.ali-saleh@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Prasad Munirathnam <Prasad.Munirathnam@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-08scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_templateNathan Chancellor1-6/+9
Clang warns several times in the scsi subsystem (trimmed for brevity): drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to switch condition type (2147762695 to 18446744071562347015) [-Wswitch] case CCISS_GETBUSTYPES: ^ drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to switch condition type (2147762694 to 18446744071562347014) [-Wswitch] case CCISS_GETHEARTBEAT: ^ The root cause is that the _IOC macro can generate really large numbers, which don't fit into type 'int', which is used for the cmd parameter in the ioctls in scsi_host_template. My research into how GCC and Clang are handling this at a low level didn't prove fruitful. However, looking at the rest of the kernel tree, all ioctls use an 'unsigned int' for the cmd parameter, which will fit all of the _IOC values in the scsi/ata subsystems. Make that change because none of the ioctls expect a negative value for any command, it brings the ioctls inline with the reset of the kernel, and it removes ambiguity, which is never good when dealing with compilers. Link: https://github.com/ClangBuiltLinux/linux/issues/85 Link: https://github.com/ClangBuiltLinux/linux/issues/154 Link: https://github.com/ClangBuiltLinux/linux/issues/157 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Bradley Grove <bgrove@attotech.com> Acked-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.