aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-8/+1
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd1-8/+1
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-27[SCSI] lpfc 8.3.30: Update lpfc to version 8.3.30James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Revert fix for Link Pull Causes I/O FailuresJames Smart2-10/+0
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Added more T10 DIF debugfs error injectionJames Smart3-60/+180
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Update copyright date for files modified in 2012James Smart4-4/+4
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix handling of REG_VFI and cable pull.James Smart1-1/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Enhancements for T10 DIF debugfs error injectionJames Smart3-148/+203
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Change default DA_ID support from disabled to enabledJames Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Flush reset register writeJames Smart1-1/+3
Used PCI configure space read to flush PCI function reset register write Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Update copyright date for files modified in 2012James Smart8-8/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fixed panic with extents and small blocksJames Smart1-6/+8
Fixed system panic when extents enabled with large number of small blocks Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Add -Werror compilation flagJames Smart1-0/+2
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fixed the system panic during EEH recoveryJames Smart1-8/+11
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix resource leak when acc fails for received plogiJames Smart1-2/+6
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix SLI4 driver module load and unloadJames Smart1-9/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fixed missing CVL event causing FCF failoverJames Smart5-10/+23
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix deadlock during adapter offline requestJames Smart1-5/+3
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix RPI registered multiple times after HBA resetJames Smart2-5/+2
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix driver handling of XRI Aborted CQE responseJames Smart2-3/+18
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix port and system failure in SLI4 FC function resetJames Smart2-1/+7
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix lack of LOGO with vport delete.James Smart1-1/+2
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Make BA_ACC work on a fully qualified exchangeJames Smart1-3/+2
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: Update driver version to 8.3.29James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is heldJames Smart1-79/+57
Note: this is a replacement patch for the issue pointed out in http://www.gossamer-threads.com/lists/linux/kernel/1477270 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: Locking fix and Memory leak FixesJames Smart4-5/+13
Locking fix and Memory leak Fixes - Fix Locking code raises IRQ twice (NA) - Fix mailbox and vpi memory leaks (126818) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: FC Discovery state machine fixesJames Smart3-2/+13
FC Discovery state machine fixes. - Fix bug with driver returning the inactive ndlp (125743) - Fix discovery problem when in pt2pt by copying old ndlp state before state change (126887) - Fix ndlp nodelist not empty wait timeout during driver unloading (127052) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: T10 Diff fixes and enhancementsJames Smart7-125/+1049
T10 Diff fixes and enhancements: - Add SLI4 Lancer support for T10 DIF / BlockGuard (121980) - Fix SLI4 BlockGuard behavior when protection data is generated by HBA (121980) - Enhance debugfs for injecting T10 DIF errors (123966, 132966) - Fix Incorrect usage of bghm for BlockGuard errors (127022) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: SLI related fixesJames Smart11-34/+207
SLI related fixes: - Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230) - Fix ELS FDISC failing with local reject / invalid RPI. (126350) - Fix reset port when reset is needed during fw_dump (125807) - Fix unbounded firmware revision string from port cause panic (126560) - Fix driver behavior when receiving an ADISC (126654) - Fix driver not returning when bad ndlp found in abts error event handling (126209) - Add more driver logs in area of SLI4 port error attention and reset recovery (126813, 124466) - Fix failure in handling large CQ/EQ identifiers in an IOV environment (126856) - Fix for driver using duplicate RPIs after lancer port reset (126723) - Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a zero SID (126779, 126897) - Fix for SLI4 Port delivery for BLS ABORT ACC (126289) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: BSG and User interface fixesJames Smart4-5/+63
BSG and User interface fixes: - Fix driver processing an els command using 16Gb FC Adapter (126345) - Change SLI4 FC port internal loopback to inner internal (126409) - Fix bug with driver dump command type 4 using 16Gb FC Adapter (126406) - Create character device to take a reference on the driver (126082) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Update driver version to 8.3.28James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adaptersJames Smart9-167/+470
- Add Basic support for SLI4 Loopback. (CR 124951, 125766, 124951, 125843, 125832, 125843) - Added missing protection in setting/clearing of phba->link_flag bit field (CR 125994) - Use link type and link number obtained from READ_CONFIG mailbox command. (CR 126264) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Critical Miscellaneous fixesJames Smart6-139/+350
- Make lpfc_sli4_pci_mem_unset interface type aware (CR 124390) - Convert byte count to word count when calling __iowrite32_copy (CR 122550) - Checked the ERR1 and ERR2 registers for error attention due to SLI Port state affected by forced debug dump. (CR 122986, 122426, 124859) - Use the lpfc_readl routine instead of the readl for the port status register read in lpfc_handle_eratt_s4 (CR 125403) - Call lpfc_sli4_queue_destroy inside of lpfc_sli4_brdreset before doing a pci function reset (CR 125124, 125168, 125572, 125622) - Zero out the HBQ when it is allocated (CR 125663) - Alter port reset log messages to indicate error type (CR 125989) - Added proper NULL pointer checking to all the places that accessing the queue memory (CR 125832) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] Lpfc 8.3.28: FC and SCSI Discovery FixesJames Smart8-19/+75
FC and SCSI Discovery Fixes: - Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI and FDISC. (CR 124339) - Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being retried too quickly (CR 124668) - Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric nodes (CR 123924) - Only retry FDISCs every second and stop retrying after devloss number of retries (CR 13939) - Check to see if vports are unloading before adding them to the vport work array. (CR 124996) - Fixed illegal state transition during driver unload (CR 124191) - Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002) - Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and above. (CR 126094) - Clear FCP command bytes that are not used. (CR 126209) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Add support for ABTS failure handlingJames Smart7-93/+263
Add support for ABTS failure handling: - Add asynchronous ABTS notification event feature to driver (CR 124578) - Change driver message 3092 and 3116 to KERN_WARNING (CR 124768) - Alter the SCR ELS command to use the temporary RPI and the Destination DID for SLI4-FC (CR 126070) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: SLI fixes and added SLI4 supportJames Smart7-126/+156
Adapter (SLI) interface fixes: - Modify WQ handling to use entry_repost (CR 123981) - Fix for ABTS. Do not free original IOCB whenever ABTS fails. (CR 115829) - Check board for FCoE before reading FCoE paramaters (CR124731) - Add support for SLI4 FC Loop mode (CR 124721) - Add support for resource count changes during fw reset. (CR 125888, 125675) - Increase CQE count from 256 to 1024. (CR 126149) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfacesJames Smart9-398/+356
Miscellaneous fixes in sysfs and mgmt interfaces: - Added SLI4 INTF_TYPE and SLI_FAMILY as sub-field to the fwrev sysfs attribute (CR 124103) - Added a sysfs attribute "protocol" to report SLI4 port link protocol type (CR 124102) - Increment mix-and-match minor number by 1 for added "protocol" sysfs attribute. (124102) - Move the link speed check into the generic sli3/sli4 code path. (CR 124185, 124122) - Deleted check for inExtWLen (CR 122523) - Add the word "offline" to message 2889 (CR 124385) - Conditionalize the firmware upgrade/downgrade so that it is only attempted for SLI4 type 2 boards (CR 124406) - Return an error if the mbox sysfs is called. (CR 124210) - When port_state is less than LPFC_VPORT_READY, report FC_PORTSTATE_BYPASSED (CR 120018) - Added driver support for performing persistent linkdown based on configure region 23 (CR 124534) - Added restore state and error log when sysfs board_mode attribute access failed (CR 124158) - Added support for SLI4_CONFIG non-embedded COMN_GET_CNTL_ADDL_ATTR pass-through (CR 124466) - Rejecting un-supported multi-buffer mailbox commands (CR 124771) - Byte swap the extended data request and response data for extended mailbox data (CR 125081) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-31scsi: Fix up files implicitly depending on module.h inclusionPaul Gortmaker3-0/+3
The module.h header was implicitly present everywhere, so files with no explicit include of the module infrastructure would build anyway. We are now removing the implicit include, and so we need to call out the module.h file that we need explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31scsi: Add export.h for EXPORT_SYMBOL/THIS_MODULE as requiredPaul Gortmaker1-0/+1
For the basic SCSI infrastructure files that are exporting symbols but not modules themselves, add in the basic export.h header file to allow the exports. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-16[SCSI] lpfc 8.3.27: Change driver version to 8.3.27James Smart1-1/+1
Change driver version to 8.3.27 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: T10 additions for SLI4James Smart5-19/+471
Added T10 DIFF error injection code. Added T10 DIFF structure definitions for SLI4 devices. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Fix queue allocation failure recoveryJames Smart3-67/+118
Fix queue allocation failure recovery - Move the allocation of the Queues closer to the creation of the queues. - If there is a problem with creation, or if the HBA is reset, the queues will be completely freed and re allocated. - Only allocate fcp_eq_hdl if cfg_fcp_eq_count is non-zero. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Change algorithm for getting physical port nameJames Smart4-6/+366
Implemented new algorithm for getting physical port name for all SLI4 devices Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Changed worst case mailbox timeoutJames Smart8-136/+229
Changed the timeout value for flash-based SLI_CONFIG (0x9B) mailbox command to 300 seconds for worst case flash delays. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixesJames Smart11-57/+143
Miscellanous logic and interface fixes - Fix lpfc_init_vfi_cmpl to check the interface type for interface type 0 before parsing the results. - Cast uint32_t values that are multiplied to uint64_t before the multiplication. - Instead of "break" statement when PCI read returned error, use the goto statement to the end of the routine after setting return value - moved the msleep(10) to the beginning of the wait loop for checking the SLIPort_Status register - Added the code to follow the existing wait for SLIPort_Status register RDY, ERR, and RN bits to be set by the port before proceeding to perform PCI function reset. - Do not override ulpCt_h and ulpCt_l for SLI 4 ports. - For vport delete, call lpfc_nlp_put when the vport's vpi state is not marked with VPI_REGISTERED. - Added missed fields into the driver's Controller Attributes Structure - Changed ringing EQ/CQ/RQ doorbell register to be dependent on the size of the queue. - Return -EACCES in issue_reset if cfg_enable_hba_reset is zero. - Added new logging flag LOG_FCP_UNDER 0x00040000 to qualify underrun logging. - Add a check in the fabric name display routine to display 0 if the port state is <= FLOGI. - Add a check to the switch statement in lpfc_decode_firmware_rev to check for an 'X'. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] lpfc 8.3.26: Change driver version to 8.3.26James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] lpfc 8.3.26: Fix SYSFS interface issuesJames Smart2-17/+28
Fix SYSFS interface issues. - In the lpfc_sli4_pdev_status_reg_wait() routine, after initial 100ms delay following write to PHYSDEV_CONTROL register for the firmware reaction, check the RN bit and ERR bit of the SLIPORT_STATUS register. If none of them became 1, the previous PHYSDEV_CONTROL register should be considered failed due to lack of privilege and error for no permission should be returned immediately without getting into the wait for RDY bits on the SLIPORT_STATUS register. - Remove the driver check on dev->is_physfn before proceed to perform the PHYSDEV_CONTROL register write, and let the PCI function's privilege setting and driver handling of PHYSDEV_CONTROL register write failure to handle the reset-ability through the SLI port. - Added key to ctlreg_write to prevent unauthorized or unexpected write to the control register. - Change return to EACCES for sysfs access that are failed because hba_reset is disabled. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] lpfc 8.3.26: Fix HBA initialization issuesJames Smart2-27/+35
Fix HBA initialization issues - Swap all values that come from the firmware image on little endian systems. Created a new bf_get_be macro that does the same as the bf_get_le macro but for big endian data instead of little endian data. - Moved the incrementing of temp_offset after the copy fixed the write object loop to use temp_offset to figure out where the end of the image is instead of offset. - Added the necessary codes for properly bringing the driver instance offline and then trying to bring the port back online with the PCI function IP reset. If it fails to bring the SLI port back online, it will fall through to bringing the SLI port to HBA error offline. - Add a call in the probe_one_s3 and probe_one_s4 routines to get the Modeldesc - Change OCe50100 to OCe15100 - Made the error log also include the PCI BAR bitmap returned from kernel call pci_select_bars(). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] lpfc 8.3.26: Fix issues pertaining to SCSI/FC protocol.James Smart4-16/+21
Fix issues pertaining to SCSI/FC protocol. - Allow frames destined to 0xFFFFFE to be processed by the driver by matching that DID with the physical port. - Call lpfc_sli_issue_iocb with context1 set to ndlp - In echo command accept function, adjust memcpy to limit memcpy to 1K - Set LPFC_SLI3_BG_ENABLED properly upon completion. - Skip the INIT_VFI call in lpfc_register_fcf if the FCF is already registered and go immediately to initial flogi. - use "status" variable instead of "ret" variable to hold the return of the fc_block_scsi_eh. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Change driver version to 8.3.25James Smart1-1/+1
Change driver version to 8.3.25 Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.