aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-05-03[SCSI] lpfc 8.1.6 : Fix Data Corruption in Bus Reset PathJames Smart2-50/+20
This patch updates the lpfc driver to revision 8.1.6, which includes the following changes: - Fix data corruption in SCSI BUS reset path, due to reusing the same request structure for each target. - Change version number to 8.1.6 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Change version number to 8.1.5James Smart1-1/+1
Change version number to 8.1.5 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Misc small fixesJames Smart3-10/+8
Contains the following misc fixes: - Fix build warnings - Race condition in lpfc_workq_post_event() could corrupt phba->work_list. - nlp_sid was not being initialized properly - Fix some RSCN handling during the re-discovery after Link Up event. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processingJames Smart2-33/+37
Additional fixes to LOGO, PLOGI, and RSCN processing Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Fix cleanup code in the lpfc_pci_probe_one() error code pathJames Smart1-2/+9
Fix cleanup code in the lpfc_pci_probe_one() error code path. This changes the original patch by: - hardsetting the return value from lpfc_pci_probe_one() to -ENODEV (negative value) if we fail attach - removes the checks from lpfc_pci_remove_one() validating the host and phba pointers as it's no longer needed. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Fixed FC protocol violation in handling of PRLO.James Smart3-14/+38
Fixed FC protocol violation in handling of PRLO. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Use asynchronous ABTS completion to speed up abort completionsJames Smart6-51/+4
Use asynchronous ABTS completion to speed up abort completions Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Fix Discovery processing for NPorts that hit nodev_tmo during discoveryJames Smart3-22/+79
Fix Discovery processing for NPorts that hit nodev_tmo during discovery Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-26[PATCH] mempool: use common mempool kmalloc allocatorMatthew Dobson1-18/+4
This patch changes several mempool users, all of which are basically just wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather than their own wrapper function, removing a bunch of duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-12[SCSI] lpfc 8.1.4 : Change version number to 8.1.4James Smart1-1/+1
Change version number to 8.1.4 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Two misc fixesJames Smart2-1/+3
Two misc fixes: - Fix deadlock caused by return with host_lock held in lpfc_findnode_did - Initialize all fields of the allocated mail box structure to zero. Was causing some sysfs mailbox commands to fail immediately after load. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on dual channel adaptersJames Smart5-9/+100
Introduce lpfc_reset_barrier() function for resets on dual channel adapters Workaround for a hardware errata on dual channel asics. There is a potential for the chip to lock up on a reset if a shared dma engine is in use. The (ugly) work around requires a reset process which uses a mailbox command to synchronize the independent channels prior to the reset to avoid the issue. Unfortunately, the timing windows required to ensure this workaround succeeds are very specific, meaning we can't release the cpu during the barrier. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlpJames Smart2-0/+15
Fixed a timer panic due to timer firing after freeing ndlp Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retryJames Smart4-45/+52
Fixed RSCN handling when a PLOGI is in retry. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12[SCSI] lpfc 8.1.4 : Fix Discovery processing for NPorts that change their NPortId on the flyJames Smart4-94/+204
Fix Discovery processing for NPorts that change their NPortId on the fly due to a cable swap. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[SCSI] lpfc: minor syntax fixesJames Bottomley2-1/+6
Stop gcc complaining about undefined variables Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Change version number to 8.1.3Jamie Wellnitz1-1/+1
Change version number to 8.1.3 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix polling mode panicJamie Wellnitz2-6/+16
Fix polling mode panic Cause: Race between interrupt driven and polling path in harvesting iocbs from the response ring. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Protect NPL lists with host lockJamie Wellnitz2-30/+26
Protect NPL lists with host lock Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called outside of the discovery thread context. We have to iterate through the NPL lists under the host lock and all add/del operations on those lists have to be done under host lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix deadlock in lpfc_fdmi_tmo_handlerJamie Wellnitz1-6/+0
Fix deadlock in lpfc_fdmi_tmo_handler lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to protect access to work_hba_events. This was already checked in the worker thread so we can remove that code completely and remove access to the host_lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI ringsJamie Wellnitz3-3/+50
Fix performance when using multiple SLI rings Currently the driver allocates all of its SLI command and response ring entries to one primary ring. Other rings get little, or no, resources. Allow more resources to be given to ring 1 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Remove unused MBhostaddr from lpfc_sli structureJamie Wellnitz1-3/+1
Remove unused MBhostaddr from lpfc_sli structure Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: PCI hrd_type should be obtained with pci_read_config_byte() macroJamie Wellnitz1-2/+4
PCI hrd_type should be obtained with pci_read_config_byte() macro Driver keys off of this field to report the proper adapter type. The pci subsystem explicitly clears the multiport bit in the copy of the field given the driver. Thus, to properly name the card, obtain it from config space. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIGJamie Wellnitz3-94/+126
Derive supported speeds from LMT field in the READ_CONFIG Driver was keying off internal cores. Use what the firmware reports instead. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Change version number to 8.1.2Jamie Wellnitz1-3/+3
Change version number to 8.1.2 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediatelyJamie Wellnitz1-1/+30
Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fix panic caused by HBA resets and target side cable pullsJamie Wellnitz1-3/+3
Fix panic caused by HBA resets and target side cable pulls Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed module parameter descriptions.Jamie Wellnitz1-3/+3
Fixed module parameter descriptions. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code cleanup of lpfc_mbx_cmpl_config_linkJamie Wellnitz1-64/+43
Code cleanup of lpfc_mbx_cmpl_config_link Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Allow turning on internal loop-back modeJamie Wellnitz2-1/+5
Allow turning on internal loop-back mode Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code style changes for Discovery codeJamie Wellnitz4-95/+74
Code style changes for Discovery code Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc staticJamie Wellnitz1-2/+2
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Added support for FANJamie Wellnitz4-58/+140
Added support for FAN Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz9-152/+390
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hbaJamie Wellnitz1-1/+0
Remove hba_list from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Correct use of the hostdata field in scsi_hostJamie Wellnitz3-41/+40
Correct use of the hostdata field in scsi_host Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Misc FC Discovery changes :Jamie Wellnitz5-393/+452
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding commands per lpfc HBAJamie Wellnitz1-0/+15
Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a double insertion of mail box object to the SLI mailbox list.Jamie Wellnitz1-3/+2
Fixed a double insertion of mail box object to the SLI mailbox list. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11KJamie Wellnitz1-1/+16
Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Explicitly initialize the skip_post argument to lpfc_sli_send_resetJamie Wellnitz1-1/+1
Explicitly initialize the skip_post argument to lpfc_sli_send_reset on a ERATT interrupt. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a race condition in the PLOGI retry logic.Jamie Wellnitz2-12/+24
Fixed a race condition in the PLOGI retry logic. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Handling of ELS commands RRQ, RPS, RPL and LIRR correctlyJamie Wellnitz5-34/+309
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused SLI_IOCB_HIGH_PRIORITYJamie Wellnitz2-11/+0
Remove unused SLI_IOCB_HIGH_PRIORITY Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unreferenced cfg_fcp_bind_method from struct lpfc_hbaJamie Wellnitz1-1/+0
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused prototypes from lpfc_crtn.hJamie Wellnitz1-18/+0
Remove unused prototypes from lpfc_crtn.h Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12[SCSI] lpfc_scsi.c: make lpfc_get_scsi_buf() staticAdrian Bunk1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Change version number to 8.1.1James.Smart@Emulex.Com1-1/+1
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : kill use of pci_read_config_xxxJames.Smart@Emulex.Com1-7/+3
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Added code to adjust lun queue depth to avoid target overloadingJames.Smart@Emulex.Com3-1/+62
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.