| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For updating the IOC firmware's timestamp with system timestamp, the driver
issues the Mpi26IoUnitControlRequest message. While framing the
Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the
current timestamp into IOCParameterValue field and the higher 32 bits into
Reserved7 field.
Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.com
Fixes: f98790c00375 ("scsi: mpt3sas: Sync time periodically between driver and firmware")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While determining the SAS address of a drive, the driver checks whether the
handle number is less than the HBA phy count or not. If the handle number
is less than the HBA phy count then driver assumes that this handle belongs
to HBA and hence it assigns the HBA SAS address.
During IOC firmware downgrade operation, if the number of HBA phys is
reduced and the OS drive's device handle drops below the phy count while
determining the drive's SAS address, the driver ends up using the HBA's SAS
address. This leads to a mismatch of drive's SAS address and hence the
driver unregisters the OS drive and the system goes into read-only mode.
Update the IOC's num_phys to the HBA phy count provided by actual loaded
firmware.
Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com
Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
|
|
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1d5 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This symbol is not used outside of mpt3sas_ctl.c, mark it static.
Fixes the following sparse warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3988:18: warning: symbol
'mpt3sas_dev_attrs' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1634639239-2892-1-git-send-email-jiapeng.chong@linux.alibaba.com
Fixes: 1bb3ca27d2ca ("scsi: mpt3sas: Switch to attribute groups")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.
Link: https://lore.kernel.org/r/20211007202923.2174984-53-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are a couple of statements where the indentation is not correct,
clean these up. Remove a redundant break statement.
Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Call cpu_relax() while waiting for the current blk-mq polling instance to
complete.
Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
Use the SCSI midlayer interfaces to query protection interval, reference
tag, and per-command DIX flags.
Link: https://lore.kernel.org/r/20210817025014.12085-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging
reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-31-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently the call to _base_static_config_pages() is assigning the error
return to variable 'rc' but checking the error return in error 'r'. Fix
this by assigning the error return to variable 'r' instead of 'rc'.
Link: https://lore.kernel.org/r/20210804134940.114011-1-colin.king@canonical.com
Fixes: 19a622c39a9d ("scsi: mpt3sas: Handle firmware faults during first half of IOC init")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
|
|
Similarly to AHCI, introduce the device sysfs attribute
sas_ncq_prio_supported to advertise if a SATA device supports the NCQ
priority feature. Without this new attribute, the user can only discover if
a SATA device supports NCQ priority by trying to enable the feature use
with the sas_ncq_prio_enable sysfs device attribute, which fails when the
device does not support high prioity commands.
Link: https://lore.kernel.org/r/20210807041859.579409-11-damien.lemoal@wdc.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 39.100.00.00.
Link: https://lore.kernel.org/r/20210809072639.21228-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the mpt3sas driver sets the default queue depth based on the
physical interface of the attached device:
- SAS : 254
- SATA: 32
- NVMe: 128
The IOC firmware provides a recommended queue depth for each device through
SAS IO Unit Page1 for SAS/SATA and PCIe IO Unit Page 1 for NVMe devices.
If the host sets the queue depth greater than the firmware recommended
value, then the IOC places the I/Os above the recommended queue depth in an
internal pending queue. This consumes outstanding host-credit/resources,
thereby leading to potential starvation of other devices.
To avoid this, use the device depth recommended by the IOC firmware.
Link: https://lore.kernel.org/r/20210809072639.21228-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bump driver version to 38.100.00.00.
Link: https://lore.kernel.org/r/20210803065134.19090-1-sreekanth.reddy@broadcom.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X
vectors associated with queues dedicated to polling. The IOC hardware is
single submission queue and multiple reply queue. However, using the shared
host tagset support it is possible to simulate multiple hardware queues.
When poll_queues are enabled through the module parameter, the driver will
allocate extra reply queues without an MSI-X association. All I/O
completion on these queues will be done through the iopoll interface.
Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The IOC firmware assumes that the host driver is still alive after shutdown
and continues to post events to host memory (due to faulty expander phy
links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC
memory access).
Perform an IOC soft reset as part of shutdown to disable event posting.
Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.
Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the structurally dead code (UNREACHABLE) type of error reported by
Coverity.
Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@broadcom.com
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding break statements instead of just letting
the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.
Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a firmware fault occurs while scanning the devices during IOC
initialization then the driver issues the hard reset operation to recover
the IOC. However, the driver is not issuing a Port enable request
message as part of hard reset operation during IOC initialization. Due to
this, the driver will not receive get any device discovery-related events
and hence devices will not be accessible.
Teach the driver to gracefully handle firmware faults while scanning for
target devices during IOC initialization. Make the driver issue a port
enable request message as part of hard reset operation. This permits
receiving device discovery-related events from the firmware after the hard
reset operation completes.
Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During first half of IOC initialization (i.e. before going for device
scanning), if any firmware fault occurs then driver is aborting the IOC
initialization operation.
Modify the driver to issue a diag reset operation to recover IOC from fault
state and reinitialize the IOC.
Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Do not cancel current running firmware event work if the event type is
different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES. Otherwise a deadlock
can be observed while cancelling the current firmware event work if a hard
reset operation is called as part of processing the current event.
Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix kernel-doc warnings, spellos, and typos.
drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'
mpt3sas_base.c:1362: warning: missing initial short description on line:
* _base_display_reply_info -
mpt3sas_base.c:2151: warning: contents before sections
mpt3sas_base.c:2314: warning: missing initial short description on line:
* base_make_prp_nvme -
Link: https://lore.kernel.org/r/20210418203246.782-1-rdunlap@infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following warnings:
drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool'
drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool'
Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org
Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region")
Fixes: 7dd847dae1c4 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region")
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following out-of-bounds warnings by embedding existing struct
htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its
members:
include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a bunch
of struct members adjacent to each other in a single call to memcpy(). All
those members are exactly the same contained in struct htb_rel_query, so
instead of duplicating them into struct mpt3_addnl_diag_query, replace them
with new member rel_query of type struct htb_rel_query. So, now that this
new object is introduced, memcpy() doesn't overrun the length of
&karg.buffer_rel_condition, because the address of the new struct object
_rel_query_ is used as destination, instead. The same issue is present when
calling memset(), and it is fixed with this same approach.
Below is a comparison of struct mpt3_addnl_diag_query, before and after
this change (the size and cachelines remain the same):
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
uint16_t buffer_rel_condition; /* 16 2 */
uint16_t reserved1; /* 18 2 */
uint32_t trigger_type; /* 20 4 */
uint32_t trigger_info_dwords[2]; /* 24 8 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 7 */
/* last cacheline: 40 bytes */
};
$ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o
struct mpt3_addnl_diag_query {
struct mpt3_ioctl_header hdr; /* 0 12 */
uint32_t unique_id; /* 12 4 */
struct htb_rel_query rel_query; /* 16 16 */
uint32_t reserved2[2]; /* 32 8 */
/* size: 40, cachelines: 1, members: 4 */
/* last cacheline: 40 bytes */
};
Also, this helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor
Build-tested-by: kernel test robot <lkp@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While diag reset is in progress there is short duration where all access to
controller's PCI config space from the host needs to be blocked. This is
due to a hardware limitation of the IOC controllers.
Block all access to controller's config space from userland applications by
calling pci_cfg_access_lock() while diag reset is in progress and unlocking
it again after the controller comes back to ready state.
Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.4.108+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Covert ActiveCablePowerRequirement's value to target CPU endian before
displaying it.
Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Whenever the driver is adding a vSES to virtual-phys list it is
reinitializing the list head. Hence those vSES devices which were added
previously are lost.
Stop reinitializing the list every time a new vSES device is added.
Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com
Cc: stable@vger.kernel.org #v5.11.10+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
s/encloure/enclosure/
Link: https://lore.kernel.org/r/20210322032145.2242520-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When kzalloc() returns NULL, no error return code of mpt3sas_base_attach()
is assigned. To fix this bug, r is assigned with -ENOMEM in this case.
Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com
Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove'
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead
Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update driver version to 37.101.00.00.
Link: https://lore.kernel.org/r/20210305102904.7560-8-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, reply post array buffers can not cross
a 4 GB boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, reply post buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, reply buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, sense buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, chain buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Dynamic memory allocation isn't actually needed and it can be replaced by
statically allocating memory for struct object io_unit_pg3 with 36
hardcoded entries for its GPIOVal array.
Also, this helps the with ongoing efforts to enable -Warray-bounds by
fixing the following warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds]
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’
36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’
3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/
Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use
GFP_ATOMIC instead of GFP_KERNEL when allocating memory.
Issue spotted by call_kern.cocci:
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL
./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL
Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo.fr
Fixes: 324c122fc0a4 ("scsi: mpt3sas: Add module parameter multipath_on_hba")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_ctl.c:463: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_pre_reset_handler() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:495: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_clear_outstanding_ioctls() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:512: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_reset_done_handler() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:2771: warning: expecting prototype for _ ctl_ioctl_compat(). Prototype was for _ctl_ioctl_compat() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:2789: warning: expecting prototype for _ ctl_mpt2_ioctl_compat(). Prototype was for _ctl_mpt2_ioctl_compat() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3061: warning: expecting prototype for sas_address_show(). Prototype was for host_sas_address_show() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3682: warning: expecting prototype for diag_trigger_scsi_show(). Prototype was for diag_trigger_mpi_show() instead
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3941: warning: expecting prototype for sas_ncq_io_prio_show(). Prototype was for sas_ncq_prio_enable_show() instead
Link: https://lore.kernel.org/r/20210312094738.2207817-10-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/scsi/mpt3sas/mpt3sas_transport.c:71: warning: Function parameter or member 'phy' not described in '_transport_get_port_id_by_sas_phy'
drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: Function parameter or member 'port_id' not described in '_transport_expander_report_manufacture'
drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: expecting prototype for transport_expander_report_manufacture(). Prototype was for _transport_expander_report_manufacture() instead
drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Function parameter or member 'hba_port' not described in 'mpt3sas_transport_port_add'
drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Excess function parameter 'port' description in 'mpt3sas_transport_port_add'
Link: https://lore.kernel.org/r/20210312094738.2207817-7-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Sreekanth Reddy
Linus Torvalds
Martin K. Petersen
Jiapeng Chong
Bart Van Assche
Colin Ian King
Damien Le Moal
Suganath Prabu S
Zhen Lei
Gustavo A. R. Silva
Hannes Reinecke
Randy Dunlap
Bhaskar Chowdhury
Jia-Ju Bai
Lee Jones
Christophe JAILLET