aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-22scsi: pm80xx: Switch back to original libsas event notifiersAhmed S. Darwish3-41/+36
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: pm80xx: Pass gfp_t flags to libsas event notifiersAhmed S. Darwish3-38/+65
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Call chain analysis, pm8001_hwi.c: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet() -> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() -> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)] -> process_one_iomb() -> mpi_hw_event() -> hw_event_sas_phy_up() -> pm8001_bytes_dmaed() -> hw_event_sata_phy_up -> pm8001_bytes_dmaed() All functions are invoked by process_one_iomb(), which is invoked by the interrupt service routine and the tasklet handler. A similar call chain is also found at pm80xx_hwi.c. Pass GFP_ATOMIC. For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls wait_for_completion() and msleep(). Pass GFP_KERNEL. Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove notifier indirectionJohn Garry3-46/+36
LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: pm80xx: Switch from 'pci_' to 'dma_' APIChristophe JAILLET1-4/+5
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'pm8001_init_ccb_tag()' GFP_KERNEL can be used because this function already uses this flag a few lines above. While at it, remove "pm80xx: " in a debug message. 'pm8001_dbg()' already adds the driver name in the message. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/20210117132445.562552-1-christophe.jaillet@wanadoo.fr Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: pm80xx: Clean up indentation of a code blockColin Ian King1-19/+15
A block of code is indented one level too deeply, clean this up. Link: https://lore.kernel.org/r/20210115095824.9170-1-colin.king@canonical.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Indentation does not match nesting level")
2021-01-13scsi: pm80xx: Log SATA IOMB completion status on failureVishakha Channapattan1-5/+8
Added a log message in SATA completion path to capture the status of failed command. If the status does not match any expected status, another message will be logged. On IO failure with known status, the log message will be: [ 1712.951735] pm80xx0:: mpi_sata_completion 2269: IO failed device_id 16385 status 0x1 tag XX If the firmware returns unexpected status, a message of the following format will be logged: [ 1712.951735] pm80xx0:: mpi_sata_completion XXXX: Unknown status device_id XXXXX status 0xX tag XX Link: https://lore.kernel.org/r/20210109123849.17098-8-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Simultaneous poll for all FW readinessBhavesh Jashnani1-57/+23
In check_fw_ready() we first wait for ILA to come up and then we wait for RAAE to come up and IOPs and so on. This is a sequential check. Because of this, ILA image seems to be not ready in the allocated time and so the driver marks it as "not ready" and then moves on to other FW images. ILA does become ready eventually, but is not checked again. The driver concludes that FW is not ready when it actually is. Instead of sequentially polling each image, we keep polling for all images to be ready. The timeout for the polling has been set to the sum of what was used for each individual image. Link: https://lore.kernel.org/r/20210109123849.17098-7-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Bhavesh Jashnani <bjashnani@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Fix driver fatal dump failureViswas G1-5/+9
The function pm80xx_get_fatal_dump() has two issues that result in the fatal dump not being able to complete successfully. 1. Trying to collect fatal_logs from the application fails because we are not shifting the MEMBASE-II register properly. Once we read 64K region of data we have to shift the MEMBASE-II register and read the next chunk. Only then would we be able to get complete data. 2. If a timeout occurs, our application will get stuck. Link: https://lore.kernel.org/r/20210109123849.17098-6-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Fix missing tag_free in NVMD DATA reqakshatzen1-4/+10
Tag was not freed in NVMD get/set data request failure scenario. This caused a tag leak each time a request failed. Link: https://lore.kernel.org/r/20210109123849.17098-5-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Check main config table addressakshatzen2-6/+58
The driver initializes main configuration, general status, inbound queue and outbound queue table addresses based on a value read from MSGU_SCRATCH_PAD_0 register. We should validate these addresses before dereferencing them. Adds two validations: 1. Check if main configuration table offset lies within the pcibar mapped 2. Check if first dword of main configuration table reads "PMCS" There are two calls to init_pci_device_addresses() done during pm8001_pci_probe() in this sequence: 1. First inside chip_soft_rst, where if init_pci_device_addresses fails we will go ahead assuming MPI state is not ready and reset the device as long as bootloader is okay. This gives chance to second call of init_pci_device_addresses to set up the addresses after reset. 2. The second call is via pm80xx_chip_init, after soft reset is done and firmware is checked to be ready. Once that is done we are safe to go ahead and initialize default table values and use them. Tests: 1. Enabled debugging logs and observed no issues during initialization, with a controller with no issues: pm80xx0:: pm8001_setup_msix 1034: pci_alloc_irq_vectors request ret:64 no of intr 64 pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000 pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0 pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50 pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4 pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128 pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928 pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408 pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608 pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval) pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval) pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval) pm80xx0:: pm80xx_chip_soft_rst 1446: reset register before write : 0x0 pm80xx0:: pm80xx_chip_soft_rst 1478: reset register after write 0x40 pm80xx0:: pm80xx_chip_soft_rst 1544: SPCv soft reset Complete pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000 pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0 pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50 pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4 pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128 pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928 pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408 pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608 pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval) pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval) pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval) pm80xx0:: pm80xx_chip_init 1329: MPI initialize successful! 2. Tested controller with firmware known to have initialization issue and observed no crashes with this fix: pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:01:00.0: Removing from 1:1 domain pm80xx 0000:01:00.0: Requesting non-1:1 mappings pm80xx0:: init_pci_device_addresses 948: BAD main config signature 0x0 pm80xx0:: mpi_uninit_check 1365: Failed to init pci addresses pm80xx0:: pm80xx_chip_soft_rst 1435: MPI state is not ready scratch:0:8:62a01000:0 pm80xx0:: pm80xx_chip_soft_rst 1518: Firmware is not ready! pm80xx0:: pm80xx_chip_soft_rst 1532: iButton Feature is not Available!!! pm80xx0:: pm80xx_chip_init 1301: Firmware is not ready! pm80xx0:: pm8001_pci_probe 1215: chip_init failed [ret: -16] pm80xx: probe of 0000:01:00.0 failed with error -16 pm80xx 0000:07:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:07:00.0: Removing from 1:1 domain pm80xx 0000:07:00.0: Requesting non-1:1 mappings scsi host6: pm80xx pm80xx1:: pm8001_setup_sgpio 5568: failed sgpio_req timeout pm80xx1:: mpi_phy_start_resp 3447: phy start resp status:0x0, phyid:0x0 pm80xx 0000:08:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:08:00.0: Removing from 1:1 domain pm80xx 0000:08:00.0: Requesting non-1:1 mappings 3. Without this fix we observe crash on the same controller: pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:01:00.0: Removing from 1:1 domain pm80xx 0000:01:00.0: Requesting non-1:1 mappings [<ffffffffc0451b3b>] pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx] [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx] RIP: 0010:pm80xx_chip_soft_rst+0x71/0x4c0 [pm80xx] [<ffffffffc0451b3b>] ? pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx] [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx] pm80xx0:: mpi_uninit_check 1339: TIMEOUT:IBDB value/=2 pm80xx0:: pm80xx_chip_soft_rst 1387: MPI state is not ready scratch:0:8:62a01000:0 pm80xx0:: pm80xx_chip_soft_rst 1470: Firmware is not ready! pm80xx0:: pm80xx_chip_soft_rst 1484: iButton Feature is not Available!!! pm80xx0:: pm80xx_chip_init 1266: Firmware is not ready! pm80xx0:: pm8001_pci_probe 1207: chip_init failed [ret: -16] pm80xx: probe of 0000:01:00.0 failed with error -16 Link: https://lore.kernel.org/r/20210109123849.17098-4-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Check for fatal errorakshatzen5-0/+61
When the controller runs into a fatal error, commands get stuck due to no response. If the controller is in fatal error state, abort requests issued to the controller get stuck too. Check the controller state for fatal error conditions. Link: https://lore.kernel.org/r/20210109123849.17098-3-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Do not busy wait in MPI init checkakshatzen2-5/+5
We do not need to busy wait during mpi_init_check() since it is not being invoked in atomic context. mpi_init_check() is being called from pm8001_pci_resume(), pm8001_pci_probe(). Hence we are replacing udelay with msleep. Link: https://lore.kernel.org/r/20210109123849.17098-2-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-07scsi: pm80xx: Fix error return in pm8001_pci_probe()Zhang Qilong1-1/+2
The driver did not return an error in the case where pm8001_configure_phy_settings() failed. Use rc to store the return value of pm8001_configure_phy_settings(). Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.") Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01scsi: pm80xx: Do not sleep in atomic contextAhmed S. Darwish1-1/+1
hw_event_sas_phy_up() is used in hardirq/softirq context: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet => PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() => process_oq() [spin_lock_irqsave(&pm8001_ha->lock,)] => process_one_iomb() => mpi_hw_event() => hw_event_sas_phy_up() => msleep(200) Revert the msleep() back to an mdelay() to avoid sleeping in atomic context. Link: https://lore.kernel.org/r/20201126132952.2287996-2-bigeasy@linutronix.de Fixes: 4daf1ef3c681 ("scsi: pm80xx: Convert 'long' mdelay to msleep") Cc: Vikram Auradkar <auradkar@google.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Remove space in a debug messageColin Ian King1-1/+1
There are two words that need separating with a space in a pm8001_dbg() message. Fix it. Link: https://lore.kernel.org/r/20201124093828.307709-1-colin.king@canonical.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Fix misindentationJoe Perches1-10/+10
kernel robot reported a misindentation of a goto. Fix it. At the same time, use a temporary for a repeated entry in the same block to reduce visual noise. Link: https://lore.kernel.org/r/9542a8be9954c1dca744f93f53bb1af6dd1436e8.1606192458.git.joe@perches.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Convert pm8001_printk() to pm8001_info()Joe Perches3-6/+6
Use the more common logging style. [mkp: fixed a few conflicts] Link: https://lore.kernel.org/r/69dc34ff63adfa60b3f203ed2d58143b5692af57.1606192458.git.joe@perches.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: pm_8001: Use generic power managementVaibhav Gupta1-29/+17
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-20-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: pm_8001: Drop PCI Wakeup calls from .resumeVaibhav Gupta1-1/+0
The driver calls pci_enable_wake(...., false) in pm8001_pci_resume(), and there is no corresponding pci_enable_wake(...., true) in pm8001_pci_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this driver doesn't support enable-wake and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from pm8001_pci__resume(). Link: https://lore.kernel.org/r/20201102164730.324035-19-vaibhavgupta40@gmail.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Make implicit use of pm8001_ha in pm8001_printk() explicitJoe Perches3-11/+10
Make the pm8001_printk() macro take an explicit HBA instead of assuming the existence of an unspecified pm8001_ha argument. Miscellanea: - Add pm8001_ha to the few uses of pm8001_printk() - Add HBA to the pm8001_dbg macro call to pm8001_printk() Link: https://lore.kernel.org/r/0e17a4c845f15e18f98b346ffb9b039584d21cdd.1605914030.git.joe@perches.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Neaten debug logging macros and usesJoe Perches6-1887/+1354
Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk. Convert all uses of: PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...)) to pm8001_dbg(hba, <FOO>, fmt, ...) so the visual complexity of each macro is reduced. The repetitive macro definitions are converted to a single pm8001_dbg and the level is concatenated using PM8001_##level##_LOGGING for the specific level test. Done with coccinelle, checkpatch and a little typing of the new macro definition. Miscellanea: - Coalesce formats - Realign arguments - Add missing terminating newlines to formats - Remove trailing spaces from formats - Change defective loop with printk(KERN_INFO... to emit a 16 byte hex block to %p16h Link: https://lore.kernel.org/r/49f36a93af7752b613d03c89a87078243567fd9a.1605914030.git.joe@perches.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Remove typecast for pointer returned by kcalloc()Xu Wang1-1/+1
Stop typecasting the value returned by kcalloc(). Link: https://lore.kernel.org/r/20201120083648.9319-1-vulab@iscas.ac.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16scsi: pm8001: Remove unused variable 'value'Lee Jones1-2/+2
Hasn't been used since 2009. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’: drivers/scsi/pm8001/pm8001_hwi.c:415:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20201116104119.816527-1-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-10scsi: pm8001: pm8001_sas: Fix strncpy() warning when space is not left for NULLee Jones1-1/+1
This string is not NUL terminated. Fixes the following W=1 kernel build warning(s): from drivers/scsi/pm8001/pm8001_sas.c:41: In function ‘strncpy’, inlined from ‘pm8001_issue_ssp_tmf’ at drivers/scsi/pm8001/pm8001_sas.c:919:2: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 8 equals destination size [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20201102102544.1018706-2-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race conditionyuuzheng1-1/+6
A use-after-free or null-pointer error occurs when the 251-byte response data is copied from IOMB buffer to response message buffer in function pm8001_mpi_get_nvmd_resp(). After sending the command get_nvmd_data(), the caller begins to sleep by calling wait_for_complete() and waits for the wake-up from calling complete() in pm8001_mpi_get_nvmd_resp(). Due to unexpected events (e.g., interrupt), if response buffer gets freed before memcpy(), a use-after-free error will occur. To fix this, the complete() should be called after memcpy(). Link: https://lore.kernel.org/r/20201102165528.26510-5-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: yuuzheng <yuuzheng@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Avoid busywait in FW ready checkakshatzen2-10/+17
In function check_fw_ready() we busy wait using udelay. The CPU is not released and we see need_resched failures. Busy waiting is not necessary since we are in process context and we can sleep instead. Replace udelay with msleep of 20 ms intervals while waiting for firmware to become ready. It has been verified that check_fw_ready is not being used in interrupt context anywhere, hence it is safe to make this change. Link: https://lore.kernel.org/r/20201102165528.26510-4-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Make running_req atomicViswas G5-27/+147
Incorrect value of the running_req was causing the driver unload to be stuck during the SAS lldd_dev_gone notification handling. During SATA I/O completion, for some error status values, the driver schedules the event handler and running_req is decremented from that. However, there are some other error status values (like IO_DS_IN_RECOVERY, IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the I/O has already been completed by fw/driver so running_req is not decremented. Also during NCQ error handling, driver itself will initiate READ_LOG_EXT and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT (0x2F), driver increments running_req. This will be completed by the driver in pm80xx_chip_sata_req(), but running_req was not decremented. Link: https://lore.kernel.org/r/20201102165528.26510-3-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Make mpi_build_cmd locking consistentpeter chang2-14/+15
Driver submits all internal requests (like abort_task, event acknowledgment etc.) through inbound queue 0. While submitting those, driver does not acquire any lock and this may lead to a race when there is an I/O request coming in on CPU0 and submitted through inbound queue 0. To avoid this, lock acquisition has been moved to pm8001_mpi_build_cmd(). All command submission will go through this path. Link: https://lore.kernel.org/r/20201102165528.26510-2-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: peter chang <dpf@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: pm80xx: Driver version updateViswas G1-1/+1
Update driver version from "0.1.39" -> "0.1.40" Link: https://lore.kernel.org/r/20201005145011.23674-5-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: pm80xx: Increase the number of outstanding I/O supported to 1024Viswas G5-47/+73
The pm80xx driver currently sets the controller queue depth to 256. Hoewver, the controller supports outstanding I/Os up 1024. Increase the number of outstanding I/Os from 256 to 1024. CCBs and tags are allocated according to outstanding I/Os. Also update the can_queue value (max_out_io - PM8001_RESERVE_SLOT) used by the SCSI midlayer. [mkp: fixed zeroday complaint] Link: https://lore.kernel.org/r/20201005145011.23674-4-Viswas.G@microchip.com.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: pm80xx: Remove DMA memory allocation for ccb and device structuresViswas G2-23/+33
Remove DMA memory allocation for Devices and CCB structure. Instead allocate memory outside of DMA memory. DMA memory is a limited system resource and it is better to allocate memory outside of DMA memory when possible. Link: https://lore.kernel.org/r/20201005145011.23674-3-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: pm80xx: Increase number of supported queuesViswas G6-104/+160
Current driver uses fixed number of Inbound and Outbound queues and all of the I/O, TMF and internal requests are submitted through those. A global spin lock is used to control the shared access. This can create a lock contention and it is real bottleneck in the I/O path. To avoid this, the number of supported Inbound and Outbound queues is increased to 64, and the number of queues used is decided based on number of CPU cores online and number of MSI-X vectors allocated. Also add locks per queue instead of using the global lock. Link: https://lore.kernel.org/r/20201005145011.23674-2-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-31scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abortDinghao Liu1-1/+1
When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths. Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds5-44/+68
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-07-24scsi: pm8001: Staticify 'pm80xx_pci_mem_copy' and 'mpi_set_phy_profile_req'Lee Jones1-3/+4
These are not invoked externally. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm80xx_hwi.c:69:6: warning: no previous prototype for ‘pm80xx_pci_mem_copy’ [-Wmissing-prototypes] 69 | void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset, | ^~~~~~~~~~~~~~~~~~~ drivers/scsi/pm8001/pm80xx_hwi.c:5016:6: warning: no previous prototype for ‘mpi_set_phy_profile_req’ [-Wmissing-prototypes] 5016 | void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha, | ^~~~~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200721164148.2617584-26-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Remove a bunch of set but unused variablesLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_eh_cmd_timed_out’: drivers/scsi/qla4xxx/ql4_os.c:1865:24: warning: variable ‘sess’ set but not used [-Wunused-but-set-variable] 1865 | struct iscsi_session *sess; | ^~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_session_create’: drivers/scsi/qla4xxx/ql4_os.c:3079:19: warning: variable ‘dst_addr’ set but not used [-Wunused-but-set-variable] 3079 | struct sockaddr *dst_addr; | ^~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4_8xxx_iospace_config’: drivers/scsi/qla4xxx/ql4_os.c:5512:44: warning: variable ‘db_len’ set but not used [-Wunused-but-set-variable] 5512 | unsigned long mem_base, mem_len, db_base, db_len; | ^~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5512:35: warning: variable ‘db_base’ set but not used [-Wunused-but-set-variable] 5512 | unsigned long mem_base, mem_len, db_base, db_len; | ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_get_param_ddb’: drivers/scsi/qla4xxx/ql4_os.c:6269:24: warning: variable ‘ha’ set but not used [-Wunused-but-set-variable] 6269 | struct scsi_qla_host *ha; | ^~ Link: https://lore.kernel.org/r/20200721164148.2617584-19-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Fix some function documentation issuesLee Jones1-8/+8
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table' drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table' drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable' drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable' drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req' drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr' drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr' Link: https://lore.kernel.org/r/20200721164148.2617584-18-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Fix a bunch of kerneldoc issuesLee Jones1-10/+11
Provide lots of missing descriptions, remove some superfluous ones (probably due to docrot) and demote one header which does not provide many descriptions, and the ones it does provide are incorrect. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_hwi.c:339: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table' drivers/scsi/pm8001/pm8001_hwi.c:360: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table' drivers/scsi/pm8001/pm8001_hwi.c:480: warning: Function parameter or member 'interval' not described in 'mpi_set_open_retry_interval_reg' drivers/scsi/pm8001/pm8001_hwi.c:1238: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_enable' drivers/scsi/pm8001/pm8001_hwi.c:1256: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_disable' drivers/scsi/pm8001/pm8001_hwi.c:1270: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_enable' drivers/scsi/pm8001/pm8001_hwi.c:1284: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_disable' drivers/scsi/pm8001/pm8001_hwi.c:4508: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_start_req' drivers/scsi/pm8001/pm8001_hwi.c:4544: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_stop_req' drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_reg_dev_req' drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_reg_dev_req' drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'flag' not described in 'pm8001_chip_reg_dev_req' drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_dereg_dev_req' drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'device_id' not described in 'pm8001_chip_dereg_dev_req' drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phyId' not described in 'pm8001_chip_phy_ctl_req' drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phy_op' not described in 'pm8001_chip_phy_ctl_req' drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_ctl_req' drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'phy_id' description in 'pm8001_chip_phy_ctl_req' drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Function parameter or member 'vec' not described in 'pm8001_chip_isr' drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'irq' description in 'pm8001_chip_isr' drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'stat' description in 'pm8001_chip_isr' drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_abort_task' drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_abort_task' drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'task_tag' not described in 'pm8001_chip_abort_task' drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'cmd_tag' not described in 'pm8001_chip_abort_task' drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Excess function parameter 'task' description in 'pm8001_chip_abort_task' drivers/scsi/pm8001/pm8001_hwi.c:4966: warning: Function parameter or member 'tag' not described in 'pm8001_chip_fw_flash_update_build' Link: https://lore.kernel.org/r/20200721164148.2617584-17-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Add descriptions for unused 'attr' function parametersLee Jones1-1/+8
Clean-up some whitespace issues too whilst we're here. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:102: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:331: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show' drivers/scsi/pm8001/pm8001_ctl.c:400: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:433: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:464: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show' drivers/scsi/pm8001/pm8001_ctl.c:623: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show' Link: https://lore.kernel.org/r/20200721164148.2617584-12-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-24scsi: pm8001: Move function header and supply some missing parameter descriptionsLee Jones1-4/+5
Functions must follow directly after the header that documents them. Fixes the following W=1 kernel build warning(s): from drivers/scsi/pm8001/pm8001_sas.c:41: inlined from ‘pm8001_issue_ssp_tmf’ at drivers/scsi/pm8001/pm8001_sas.c:919:2: drivers/scsi/pm8001/pm8001_sas.c:379: warning: Function parameter or member 'pm8001_dev' not described in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'task' description in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'num' description in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'gfp_flags' description in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'is_tmf' description in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'tmf' description in 'DEV_IS_GONE' drivers/scsi/pm8001/pm8001_sas.c:583: warning: Function parameter or member 'device_id' not described in 'pm8001_find_dev' drivers/scsi/pm8001/pm8001_sas.c:1000: warning: Function parameter or member 'dev' not described in 'pm8001_I_T_nexus_reset' Link: https://lore.kernel.org/r/20200721164148.2617584-11-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook2-2/+2
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-15scsi: pm8001: Provide descriptions for the many undocumented 'attr'sLee Jones1-0/+14
... even if they are completely unused. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:56: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_mpi_interface_rev_show' drivers/scsi/pm8001/pm8001_ctl.c:81: warning: Function parameter or member 'attr' not described in 'controller_fatal_error_show' drivers/scsi/pm8001/pm8001_ctl.c:100: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:130: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ila_version_show' drivers/scsi/pm8001/pm8001_ctl.c:155: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_inactive_fw_version_show' drivers/scsi/pm8001/pm8001_ctl.c:181: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_out_io_show' drivers/scsi/pm8001/pm8001_ctl.c:204: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_devices_show' drivers/scsi/pm8001/pm8001_ctl.c:230: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_sg_list_show' drivers/scsi/pm8001/pm8001_ctl.c:274: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_sas_spec_support_show' drivers/scsi/pm8001/pm8001_ctl.c:303: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_host_sas_address_show' drivers/scsi/pm8001/pm8001_ctl.c:322: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show' drivers/scsi/pm8001/pm8001_ctl.c:355: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_aap_log_show' drivers/scsi/pm8001/pm8001_ctl.c:390: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:423: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show' drivers/scsi/pm8001/pm8001_ctl.c:454: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show' drivers/scsi/pm8001/pm8001_ctl.c:492: warning: Function parameter or member 'attr' not described in 'event_log_size_show' drivers/scsi/pm8001/pm8001_ctl.c:510: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_iop_log_show' drivers/scsi/pm8001/pm8001_ctl.c:548: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:566: warning: Function parameter or member 'attr' not described in 'non_fatal_log_show' drivers/scsi/pm8001/pm8001_ctl.c:609: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show' Link: https://lore.kernel.org/r/20200713080001.128044-11-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: pm8001: Demote obvious misuse of kerneldoc and update othersLee Jones1-15/+15
More bitrot issues with function documentation not keeping up with API changes. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_init.c:64: warning: cannot understand function prototype: 'const struct pm8001_chip_info pm8001_chips[] = ' drivers/scsi/pm8001/pm8001_init.c:86: warning: cannot understand function prototype: 'struct scsi_host_template pm8001_sht = ' drivers/scsi/pm8001/pm8001_init.c:115: warning: cannot understand function prototype: 'struct sas_domain_function_template pm8001_transport_ops = ' drivers/scsi/pm8001/pm8001_init.c:212: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_msix' drivers/scsi/pm8001/pm8001_init.c:237: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_intx' drivers/scsi/pm8001/pm8001_init.c:265: warning: Function parameter or member 'ent' not described in 'pm8001_alloc' drivers/scsi/pm8001/pm8001_init.c:624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:624: warning: Excess function parameter 'chip_info' description in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:900: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'chip_info' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'irq_handler' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:981: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_request_irq' drivers/scsi/pm8001/pm8001_init.c:981: warning: Excess function parameter 'chip_info' description in 'pm8001_request_irq' Link: https://lore.kernel.org/r/20200713074645.126138-27-lee.jones@linaro.org Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com> Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-15scsi: Wire up ata_scsi_dma_need_drain for SAS HBA driversChristoph Hellwig1-0/+1
We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI devices through libata. That also includes the SAS HBA drivers in addition to native libata HBA drivers. Link: https://lore.kernel.org/r/20200615064624.37317-3-hch@lst.de Fixes: cc97923a5bcc ("block: move dma drain handling to scsi") Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: Introduce read and write length for IOCTL payload structureViswas G4-21/+22
Removed the common length and introduce read and write length for IOCTL payload structure. [mkp: fixed SoB ordering] Link: https://lore.kernel.org/r/20200316074906.9119-7-deepak.ukey@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <viswas.g@microchip.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: sysfs attribute for non fatal dumpDeepak Ukey4-0/+180
Added the sysfs attribute for non fatal log so that management utility can get the non fatal dump from driver. The non-fatal error is an error condition or abnormal behavior detected by the host, or detected and reported by the controller to the host.The non-fatal error does not stop the controller firmware and enables it to still respond to host requests. A typical example of a non-fatal error is an I/O timeout or an unusual error notification from the controller. Since the firmware is operational, the error dump information is pushed to host memory (by firmware) upon request from the host. Link: https://lore.kernel.org/r/20200316074906.9119-6-deepak.ukey@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: Cleanup initialization loading fail pathPeter Chang1-6/+11
1) Move the instance tracking down after we think the instance is good to go. Avoids having a use-after free. 2) There are goto targets for trying to cleanup if the hw fails to initialize, but there's some overlap depending on who thinks they own the sub-structures. Link: https://lore.kernel.org/r/20200316074906.9119-5-deepak.ukey@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Peter Chang <dpf@google.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: Free the tag when mpi_set_phy_profile_resp is receivedyuuzheng1-3/+7
In pm80xx driver, the command mpi_set_phy_profile_req is sent by host during boot to configure the phy profile such as analog setting page, rate control page. However, the tag is not freed when its response is received. As a result, 16 tags are missing for each HBA after boot. When NCQ is enabled with queue depth 16, it needs at least, 15 * 16 = 240 tags for each HBA to achieve the best performance. In current pm80xx driver with setting CCB_MAX = 256, the total number of tags in each HBA is 255 for data IO. Hence, without returning those tags to the pool after boot, some device will finally be forced to non-ncq mode by ATA layer due to excessive errors (i.e. LLDD cannot allocate tag for queued task). Link: https://lore.kernel.org/r/20200316074906.9119-4-deepak.ukey@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: yuuzheng <yuuzheng@google.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: Deal with kexec rebootsVikram Auradkar2-9/+54
A kexec reboot causes the controller fw to assert. This assertion shows up in two ways, the controller doesn't show up as ready and an interrupt is waiting as soon as the handler is registered. To resolve this added below fix: - Split the interrupt handling setup into two parts, setup and request. - If the controller ready register indicates not-ready, but that the not readiness is only on the IOC units we can still try a reset to bring the system back to the pre-reboot state. Link: https://lore.kernel.org/r/20200316074906.9119-3-deepak.ukey@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Vikram Auradkar <auradkar@google.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: pm80xx: Increase request sg lengthPeter Chang2-3/+4
Increasing the per-request size maximum (max_sectors_kb) runs into the per-device DMA scatter gather list limit (max_segments) for users of the io vector system calls (eg, readv and writev). This is because the kernel combines io vectors into DMA segments when possible, but it doesn't work for our user because the vectors in the buffer cache get scrambled. This change bumps the advertised max scatter gather length to 528 to cover 2M w/ x86's 4k pages and some extra for the user checksum. It trims the size of some of the tables we don't care about and exposes all of the command slots upstream to the SCSI layer. Also reduced the PM8001_MAX_CCB to 256 as pm8001 driver has memory limit depend on machine capability. If we increase the sg length, we need to trade-off it by decreasing PM8001_MAX_CCB. PM8001_MAX_CCB = 256 does not have any influence on normal use Link: https://lore.kernel.org/r/20200316074906.9119-2-deepak.ukey@microchip.com Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Peter Chang <dpf@google.com> Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.