aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-04-15scsi: pm80xx: Remove global lock from outbound queue processingViswas G3-5/+9
Introduce spin lock for outbound queue. With this, driver need not acquire HBA global lock for outbound queue processing. Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Reset PI and CI memory during re-initializationViswas G2-0/+4
Producer index(PI) outbound queue and consumer index(CI) for Outbound queue are in DMA memory. During resume(), the stale PI and CI Values will lead to unexpected behavior. These values should be reset to 0 during driver reinitialization. Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Completing pending I/O after fatal errorRuksar Devadi6-7/+65
When controller runs into fatal error, I/Os get stuck with no response, handler event is defined to complete the pending I/Os (SAS task and internal task) and also perform the cleanup for the drives. Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track iop1 countVishakha Channapattan1-0/+23
A new sysfs variable 'ctl_iop1_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing that indicates that controller is not dead. Using the 'ctl_iop1_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop1_count 0x00000069 0x0000006b 0x0000006d 0x00000072 Link: https://lore.kernel.org/r/20210415103352.3580-6-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track iop0 countVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_iop0_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing that indicates that controller is not dead. Using the 'ctl_iop0_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop0_count 0x000000a3 0x000001db 0x000001e4 0x000001e7 Link: https://lore.kernel.org/r/20210415103352.3580-5-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to track RAAE countVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_raae_count' is being introduced that tells if the controller is alive by indicating controller ticks. If on subsequent run we see the ticks changing in RAAE count that indicates that controller is not dead. Using the 'ctl_raae_count' sysfs variable we can see ticks incrementing: linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_raae_count 0x00002245 0x00002253 0x0000225e Link: https://lore.kernel.org/r/20210415103352.3580-4-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to check controller hmi errorVishakha Channapattan1-0/+22
A new sysfs variable 'ctl_hmi_error' is being introduced to give the error details if the MPI initialization fails Using the 'ctl_hmi_error' sysfs variable we can check the error details: linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_hmi_error 0x00000000 0x00000000 0x00000000 Link: https://lore.kernel.org/r/20210415103352.3580-3-Viswas.G@microchip.com Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15scsi: pm80xx: Add sysfs attribute to check MPI stateVishakha Channapattan1-1/+31
A new sysfs variable 'ctl_mpi_state' is being introduced to check the state of MPI. Using the 'ctl_mpi_state' sysfs variable we can check the MPI state: linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_mpi_state MPI is successfully initialized Link: https://lore.kernel.org/r/20210415103352.3580-2-Viswas.G@microchip.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up open bracesLuo Jiaxing1-4/+2
checkpatch reports the following: ERROR: that open brace { should be on the previous line +static struct error_fw flash_error_table[] = +{ Fix a couple of instances of misplaced open bracket. Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up white spaceLuo Jiaxing6-36/+39
checkpatch reports the following: ERROR: space prohibited before that ',' (ctx:WxW) +int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb); Remove unnecessary whitespace. Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Fix potential infinite loopColin Ian King1-1/+1
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop counter. Fix this by making the loop counter the same type as pm8001_ha->max_q_num. [mkp: this is purely theoretical, max_q_num is currently limited to 64] Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure") Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Remove busy wait from mpi_uninit_check()Igor Pylypiv1-5/+5
mpi_uninit_check() is not being called in an atomic context. The only caller of mpi_uninit_check() is pm80xx_chip_soft_rst(). Callers of pm80xx_chip_soft_rst(): - pm8001_ioctl_soft_reset() - pm8001_pci_probe() - pm8001_pci_remove() - pm8001_pci_suspend() - pm8001_pci_resume() There was a similar fix for mpi_init_check() in commit d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check") Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()Igor Pylypiv1-2/+2
The mpi_uninit_check() takes longer for inbound doorbell register to be cleared. Increase the timeout substantially so that the driver does not fail to load. Previously, the inbound doorbell wait time was mistakenly increased in the mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the mpi_init_check() wait time as-is as these are timeout values and if there is a failure, waiting longer is not an issue. Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen1-4/+4
Resolve a couple of conflicts between the 5.12 fixes branch and the 5.13 staging tree (iSCSI target and UFS). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: pm80xx: Fix chip initialization failureViswas G1-4/+4
Inbound and outbound queues were not properly configured and that lead to MPI configuration failure. Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com Reported-and-tested-by: Ash Izat <ash@ai0.uk> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: pm8001: Avoid -Wrestrict warningArnd Bergmann1-1/+5
On some configurations, gcc warns about overlapping source and destination arguments to snprintf: drivers/scsi/pm8001/pm8001_init.c: In function 'pm8001_request_msix': drivers/scsi/pm8001/pm8001_init.c:977:3: error: 'snprintf' argument 4 may overlap destination object 'pm8001_ha' [-Werror=restrict] 977 | snprintf(drvname, len, "%s-%d", pm8001_ha->name, i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/pm8001/pm8001_init.c:962:56: note: destination object referenced by 'restrict'-qualified argument 1 was declared here 962 | static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha) | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~ I first assumed this was a gcc bug, as that should not happen, but a reduced test case makes it clear that this happens when the loop counter is not bounded by the array size. Help the compiler out by adding an explicit limit here to make the code slightly more robust and avoid the warning. Link: https://godbolt.org/z/6T1qPM Link: https://lore.kernel.org/r/20210323125458.1825564-1-arnd@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: pm8001: Fix a bunch of doc-rotted function headersLee Jones1-9/+9
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm80xx_hwi.c:1427: warning: expecting prototype for pm8001_chip_init(). Prototype was for pm80xx_chip_init() instead drivers/scsi/pm8001/pm80xx_hwi.c:1584: warning: expecting prototype for pm8001_chip_soft_rst(). Prototype was for pm80xx_chip_soft_rst() instead drivers/scsi/pm8001/pm80xx_hwi.c:1711: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_intx_interrupt_enable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1722: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm80xx_chip_intx_interrupt_disable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1733: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_interrupt_enable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1752: warning: expecting prototype for pm8001_chip_interrupt_disable(). Prototype was for pm80xx_chip_interrupt_disable() instead drivers/scsi/pm8001/pm80xx_hwi.c:4192: warning: expecting prototype for pm8001_chip_smp_req(). Prototype was for pm80xx_chip_smp_req() instead drivers/scsi/pm8001/pm80xx_hwi.c:4775: warning: expecting prototype for pm8001_chip_phy_stop_req(). Prototype was for pm80xx_chip_phy_stop_req() instead drivers/scsi/pm8001/pm80xx_hwi.c:4907: warning: expecting prototype for pm8001_chip_isr(). Prototype was for pm80xx_chip_isr() instead Link: https://lore.kernel.org/r/20210303144631.3175331-23-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: pm8001: Fix some misnamed function descriptionsLee Jones1-4/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead Link: https://lore.kernel.org/r/20210303144631.3175331-19-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: pm8001: Fix incorrectly named functions in headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_ctl.c:313: warning: expecting prototype for pm8001_ctl_sas_address_show(). Prototype was for pm8001_ctl_host_sas_address_show() instead drivers/scsi/pm8001/pm8001_ctl.c:530: warning: expecting prototype for pm8001_ctl_aap_log_show(). Prototype was for pm8001_ctl_iop_log_show() instead Link: https://lore.kernel.org/r/20210303144631.3175331-14-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: pm8001: Provide function name 'pm8001_I_T_nexus_reset()' in headerLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_sas.c:989: warning: expecting prototype for and hard reset for(). Prototype was for pm8001_I_T_nexus_reset() instead Link: https://lore.kernel.org/r/20210303144631.3175331-12-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: pm8001: Provide function name and fix a misspellingLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_init.c:192: warning: expecting prototype for tasklet for 64 msi(). Prototype was for pm8001_tasklet() instead drivers/scsi/pm8001/pm8001_init.c:872: warning: expecting prototype for pm8001_set_phy_settings_ven_117c_12Gb(). Prototype was for pm8001_set_phy_settings_ven_117c_12G() instead Link: https://lore.kernel.org/r/20210303144631.3175331-9-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com> Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> Cc: linux-scsi@vger.kernel.org Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-09scsi: pm80xx: Replace magic numbers with device state definesIgor Pylypiv1-4/+4
This improves the code readability. Link: https://lore.kernel.org/r/20210305060908.2476850-1-ipylypiv@google.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-09scsi: pm80xx: Remove list entry from pm8001_ccb_infoIgor Pylypiv1-1/+0
List entry is not used. Link: https://lore.kernel.org/r/20210301181847.2893199-1-ipylypiv@google.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: pm80xx: Switch back to original libsas event notifiersAhmed S. Darwish3-41/+36
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: pm80xx: Pass gfp_t flags to libsas event notifiersAhmed S. Darwish3-38/+65
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Call chain analysis, pm8001_hwi.c: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet() -> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() -> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)] -> process_one_iomb() -> mpi_hw_event() -> hw_event_sas_phy_up() -> pm8001_bytes_dmaed() -> hw_event_sata_phy_up -> pm8001_bytes_dmaed() All functions are invoked by process_one_iomb(), which is invoked by the interrupt service routine and the tasklet handler. A similar call chain is also found at pm80xx_hwi.c. Pass GFP_ATOMIC. For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls wait_for_completion() and msleep(). Pass GFP_KERNEL. Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: libsas: Remove notifier indirectionJohn Garry3-46/+36
LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: pm80xx: Switch from 'pci_' to 'dma_' APIChristophe JAILLET1-4/+5
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'pm8001_init_ccb_tag()' GFP_KERNEL can be used because this function already uses this flag a few lines above. While at it, remove "pm80xx: " in a debug message. 'pm8001_dbg()' already adds the driver name in the message. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/20210117132445.562552-1-christophe.jaillet@wanadoo.fr Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: pm80xx: Clean up indentation of a code blockColin Ian King1-19/+15
A block of code is indented one level too deeply, clean this up. Link: https://lore.kernel.org/r/20210115095824.9170-1-colin.king@canonical.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Indentation does not match nesting level")
2021-01-13scsi: pm80xx: Log SATA IOMB completion status on failureVishakha Channapattan1-5/+8
Added a log message in SATA completion path to capture the status of failed command. If the status does not match any expected status, another message will be logged. On IO failure with known status, the log message will be: [ 1712.951735] pm80xx0:: mpi_sata_completion 2269: IO failed device_id 16385 status 0x1 tag XX If the firmware returns unexpected status, a message of the following format will be logged: [ 1712.951735] pm80xx0:: mpi_sata_completion XXXX: Unknown status device_id XXXXX status 0xX tag XX Link: https://lore.kernel.org/r/20210109123849.17098-8-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Vishakha Channapattan <vishakhavc@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Simultaneous poll for all FW readinessBhavesh Jashnani1-57/+23
In check_fw_ready() we first wait for ILA to come up and then we wait for RAAE to come up and IOPs and so on. This is a sequential check. Because of this, ILA image seems to be not ready in the allocated time and so the driver marks it as "not ready" and then moves on to other FW images. ILA does become ready eventually, but is not checked again. The driver concludes that FW is not ready when it actually is. Instead of sequentially polling each image, we keep polling for all images to be ready. The timeout for the polling has been set to the sum of what was used for each individual image. Link: https://lore.kernel.org/r/20210109123849.17098-7-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Bhavesh Jashnani <bjashnani@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Fix driver fatal dump failureViswas G1-5/+9
The function pm80xx_get_fatal_dump() has two issues that result in the fatal dump not being able to complete successfully. 1. Trying to collect fatal_logs from the application fails because we are not shifting the MEMBASE-II register properly. Once we read 64K region of data we have to shift the MEMBASE-II register and read the next chunk. Only then would we be able to get complete data. 2. If a timeout occurs, our application will get stuck. Link: https://lore.kernel.org/r/20210109123849.17098-6-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Fix missing tag_free in NVMD DATA reqakshatzen1-4/+10
Tag was not freed in NVMD get/set data request failure scenario. This caused a tag leak each time a request failed. Link: https://lore.kernel.org/r/20210109123849.17098-5-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Check main config table addressakshatzen2-6/+58
The driver initializes main configuration, general status, inbound queue and outbound queue table addresses based on a value read from MSGU_SCRATCH_PAD_0 register. We should validate these addresses before dereferencing them. Adds two validations: 1. Check if main configuration table offset lies within the pcibar mapped 2. Check if first dword of main configuration table reads "PMCS" There are two calls to init_pci_device_addresses() done during pm8001_pci_probe() in this sequence: 1. First inside chip_soft_rst, where if init_pci_device_addresses fails we will go ahead assuming MPI state is not ready and reset the device as long as bootloader is okay. This gives chance to second call of init_pci_device_addresses to set up the addresses after reset. 2. The second call is via pm80xx_chip_init, after soft reset is done and firmware is checked to be ready. Once that is done we are safe to go ahead and initialize default table values and use them. Tests: 1. Enabled debugging logs and observed no issues during initialization, with a controller with no issues: pm80xx0:: pm8001_setup_msix 1034: pci_alloc_irq_vectors request ret:64 no of intr 64 pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000 pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0 pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50 pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4 pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128 pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928 pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408 pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608 pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval) pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval) pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval) pm80xx0:: pm80xx_chip_soft_rst 1446: reset register before write : 0x0 pm80xx0:: pm80xx_chip_soft_rst 1478: reset register after write 0x40 pm80xx0:: pm80xx_chip_soft_rst 1544: SPCv soft reset Complete pm80xx0:: init_pci_device_addresses 917: Scratchpad 0 Offset: 0x2000 value 0x40002000 pm80xx0:: init_pci_device_addresses 925: Scratchpad 0 PCI BAR: 0 pm80xx0:: init_pci_device_addresses 952: VALID main config signature 0x53434d50 pm80xx0:: init_pci_device_addresses 975: GST OFFSET 0xc4 pm80xx0:: init_pci_device_addresses 978: INBND OFFSET 0x20000128 pm80xx0:: init_pci_device_addresses 981: OBND OFFSET 0x24000928 pm80xx0:: init_pci_device_addresses 984: IVT OFFSET 0x8001408 pm80xx0:: init_pci_device_addresses 987: PSPA OFFSET 0x8001608 pm80xx0:: init_pci_device_addresses 991: addr - main cfg (ptrval) general status (ptrval) pm80xx0:: init_pci_device_addresses 995: addr - inbnd (ptrval) obnd (ptrval) pm80xx0:: init_pci_device_addresses 999: addr - pspa (ptrval) ivt (ptrval) pm80xx0:: pm80xx_chip_init 1329: MPI initialize successful! 2. Tested controller with firmware known to have initialization issue and observed no crashes with this fix: pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:01:00.0: Removing from 1:1 domain pm80xx 0000:01:00.0: Requesting non-1:1 mappings pm80xx0:: init_pci_device_addresses 948: BAD main config signature 0x0 pm80xx0:: mpi_uninit_check 1365: Failed to init pci addresses pm80xx0:: pm80xx_chip_soft_rst 1435: MPI state is not ready scratch:0:8:62a01000:0 pm80xx0:: pm80xx_chip_soft_rst 1518: Firmware is not ready! pm80xx0:: pm80xx_chip_soft_rst 1532: iButton Feature is not Available!!! pm80xx0:: pm80xx_chip_init 1301: Firmware is not ready! pm80xx0:: pm8001_pci_probe 1215: chip_init failed [ret: -16] pm80xx: probe of 0000:01:00.0 failed with error -16 pm80xx 0000:07:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:07:00.0: Removing from 1:1 domain pm80xx 0000:07:00.0: Requesting non-1:1 mappings scsi host6: pm80xx pm80xx1:: pm8001_setup_sgpio 5568: failed sgpio_req timeout pm80xx1:: mpi_phy_start_resp 3447: phy start resp status:0x0, phyid:0x0 pm80xx 0000:08:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:08:00.0: Removing from 1:1 domain pm80xx 0000:08:00.0: Requesting non-1:1 mappings 3. Without this fix we observe crash on the same controller: pm80xx 0000:01:00.0: pm80xx: driver version 0.1.38 pm80xx 0000:01:00.0: Removing from 1:1 domain pm80xx 0000:01:00.0: Requesting non-1:1 mappings [<ffffffffc0451b3b>] pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx] [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx] RIP: 0010:pm80xx_chip_soft_rst+0x71/0x4c0 [pm80xx] [<ffffffffc0451b3b>] ? pm80xx_chip_soft_rst+0x6b/0x4c0 [pm80xx] [<ffffffffc043a933>] pm8001_pci_probe+0xa43/0x1630 [pm80xx] pm80xx0:: mpi_uninit_check 1339: TIMEOUT:IBDB value/=2 pm80xx0:: pm80xx_chip_soft_rst 1387: MPI state is not ready scratch:0:8:62a01000:0 pm80xx0:: pm80xx_chip_soft_rst 1470: Firmware is not ready! pm80xx0:: pm80xx_chip_soft_rst 1484: iButton Feature is not Available!!! pm80xx0:: pm80xx_chip_init 1266: Firmware is not ready! pm80xx0:: pm8001_pci_probe 1207: chip_init failed [ret: -16] pm80xx: probe of 0000:01:00.0 failed with error -16 Link: https://lore.kernel.org/r/20210109123849.17098-4-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Check for fatal errorakshatzen5-0/+61
When the controller runs into a fatal error, commands get stuck due to no response. If the controller is in fatal error state, abort requests issued to the controller get stuck too. Check the controller state for fatal error conditions. Link: https://lore.kernel.org/r/20210109123849.17098-3-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: pm80xx: Do not busy wait in MPI init checkakshatzen2-5/+5
We do not need to busy wait during mpi_init_check() since it is not being invoked in atomic context. mpi_init_check() is being called from pm8001_pci_resume(), pm8001_pci_probe(). Hence we are replacing udelay with msleep. Link: https://lore.kernel.org/r/20210109123849.17098-2-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-07scsi: pm80xx: Fix error return in pm8001_pci_probe()Zhang Qilong1-1/+2
The driver did not return an error in the case where pm8001_configure_phy_settings() failed. Use rc to store the return value of pm8001_configure_phy_settings(). Link: https://lore.kernel.org/r/20201205115551.2079471-1-zhangqilong3@huawei.com Fixes: 279094079a44 ("[SCSI] pm80xx: Phy settings support for motherboard controller.") Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-01scsi: pm80xx: Do not sleep in atomic contextAhmed S. Darwish1-1/+1
hw_event_sas_phy_up() is used in hardirq/softirq context: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet => PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() => process_oq() [spin_lock_irqsave(&pm8001_ha->lock,)] => process_one_iomb() => mpi_hw_event() => hw_event_sas_phy_up() => msleep(200) Revert the msleep() back to an mdelay() to avoid sleeping in atomic context. Link: https://lore.kernel.org/r/20201126132952.2287996-2-bigeasy@linutronix.de Fixes: 4daf1ef3c681 ("scsi: pm80xx: Convert 'long' mdelay to msleep") Cc: Vikram Auradkar <auradkar@google.com> Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Remove space in a debug messageColin Ian King1-1/+1
There are two words that need separating with a space in a pm8001_dbg() message. Fix it. Link: https://lore.kernel.org/r/20201124093828.307709-1-colin.king@canonical.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Fix misindentationJoe Perches1-10/+10
kernel robot reported a misindentation of a goto. Fix it. At the same time, use a temporary for a repeated entry in the same block to reduce visual noise. Link: https://lore.kernel.org/r/9542a8be9954c1dca744f93f53bb1af6dd1436e8.1606192458.git.joe@perches.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-30scsi: pm8001: Convert pm8001_printk() to pm8001_info()Joe Perches3-6/+6
Use the more common logging style. [mkp: fixed a few conflicts] Link: https://lore.kernel.org/r/69dc34ff63adfa60b3f203ed2d58143b5692af57.1606192458.git.joe@perches.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: pm_8001: Use generic power managementVaibhav Gupta1-29/+17
Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-20-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-25scsi: pm_8001: Drop PCI Wakeup calls from .resumeVaibhav Gupta1-1/+0
The driver calls pci_enable_wake(...., false) in pm8001_pci_resume(), and there is no corresponding pci_enable_wake(...., true) in pm8001_pci_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this driver doesn't support enable-wake and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from pm8001_pci__resume(). Link: https://lore.kernel.org/r/20201102164730.324035-19-vaibhavgupta40@gmail.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Make implicit use of pm8001_ha in pm8001_printk() explicitJoe Perches3-11/+10
Make the pm8001_printk() macro take an explicit HBA instead of assuming the existence of an unspecified pm8001_ha argument. Miscellanea: - Add pm8001_ha to the few uses of pm8001_printk() - Add HBA to the pm8001_dbg macro call to pm8001_printk() Link: https://lore.kernel.org/r/0e17a4c845f15e18f98b346ffb9b039584d21cdd.1605914030.git.joe@perches.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Neaten debug logging macros and usesJoe Perches6-1887/+1354
Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk. Convert all uses of: PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...)) to pm8001_dbg(hba, <FOO>, fmt, ...) so the visual complexity of each macro is reduced. The repetitive macro definitions are converted to a single pm8001_dbg and the level is concatenated using PM8001_##level##_LOGGING for the specific level test. Done with coccinelle, checkpatch and a little typing of the new macro definition. Miscellanea: - Coalesce formats - Realign arguments - Add missing terminating newlines to formats - Remove trailing spaces from formats - Change defective loop with printk(KERN_INFO... to emit a 16 byte hex block to %p16h Link: https://lore.kernel.org/r/49f36a93af7752b613d03c89a87078243567fd9a.1605914030.git.joe@perches.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23scsi: pm8001: Remove typecast for pointer returned by kcalloc()Xu Wang1-1/+1
Stop typecasting the value returned by kcalloc(). Link: https://lore.kernel.org/r/20201120083648.9319-1-vulab@iscas.ac.cn Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16scsi: pm8001: Remove unused variable 'value'Lee Jones1-2/+2
Hasn't been used since 2009. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’: drivers/scsi/pm8001/pm8001_hwi.c:415:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20201116104119.816527-1-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-10scsi: pm8001: pm8001_sas: Fix strncpy() warning when space is not left for NULLee Jones1-1/+1
This string is not NUL terminated. Fixes the following W=1 kernel build warning(s): from drivers/scsi/pm8001/pm8001_sas.c:41: In function ‘strncpy’, inlined from ‘pm8001_issue_ssp_tmf’ at drivers/scsi/pm8001/pm8001_sas.c:919:2: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 8 equals destination size [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20201102102544.1018706-2-lee.jones@linaro.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race conditionyuuzheng1-1/+6
A use-after-free or null-pointer error occurs when the 251-byte response data is copied from IOMB buffer to response message buffer in function pm8001_mpi_get_nvmd_resp(). After sending the command get_nvmd_data(), the caller begins to sleep by calling wait_for_complete() and waits for the wake-up from calling complete() in pm8001_mpi_get_nvmd_resp(). Due to unexpected events (e.g., interrupt), if response buffer gets freed before memcpy(), a use-after-free error will occur. To fix this, the complete() should be called after memcpy(). Link: https://lore.kernel.org/r/20201102165528.26510-5-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: yuuzheng <yuuzheng@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Avoid busywait in FW ready checkakshatzen2-10/+17
In function check_fw_ready() we busy wait using udelay. The CPU is not released and we see need_resched failures. Busy waiting is not necessary since we are in process context and we can sleep instead. Replace udelay with msleep of 20 ms intervals while waiting for firmware to become ready. It has been verified that check_fw_ready is not being used in interrupt context anywhere, hence it is safe to make this change. Link: https://lore.kernel.org/r/20201102165528.26510-4-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: akshatzen <akshatzen@google.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Radha Ramachandran <radha@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-04scsi: pm80xx: Make running_req atomicViswas G5-27/+147
Incorrect value of the running_req was causing the driver unload to be stuck during the SAS lldd_dev_gone notification handling. During SATA I/O completion, for some error status values, the driver schedules the event handler and running_req is decremented from that. However, there are some other error status values (like IO_DS_IN_RECOVERY, IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the I/O has already been completed by fw/driver so running_req is not decremented. Also during NCQ error handling, driver itself will initiate READ_LOG_EXT and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT (0x2F), driver increments running_req. This will be completed by the driver in pm80xx_chip_sata_req(), but running_req was not decremented. Link: https://lore.kernel.org/r/20201102165528.26510-3-Viswas.G@microchip.com.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.