aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-09-06pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSYJohannes Thumshirn2-0/+2
In case psataPayload->status has a status of IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY ts->stat gets set to SAS_OPEN_REJECT but a missing 'break' statement causes a fallthrough to the default handler of the switch statement overriding ts->stat to SAS_DEV_NO_RESPONSE. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Bump pm80xx driver version to 0.1.38Viswas G1-1/+1
Bump pm80xx driver version to 0.1.38. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Handling Invalid SSP Response frameViswas G2-1/+8
The request has to be retried incase if the length of the SSP Response IU is invalid. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Add PORT RECOVERY TIMEOUT supportViswas G2-17/+68
PORT RECOVERY TIMEOUT is the maximum time between the controller's detection of the PHY down until the receipt of the ID_Frame (from the same remote SAS port). If the time expires before the ID_FRAME is received, the port is considered INVALID and can be removed. The IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after Port Recovery Time. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Remove unnecessary phy disconnect while link errorViswas G1-12/+0
If the link error happens, we don't need to disconnect the phy, which will remove the drive. Instead acknowledging the controller and logging the error will be enough. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Fix for Incorrect DMA Unmapping of SG ListViswas G1-0/+1
In pm8001_ccb_task_free(), the dma unmapping is done based on ccb->n_elem value. This should be initialized to zero in the task_abort(). Otherwise, pm8001_ccb_task_free() will try for dma_unmap_sg() which is invalid for task abort and can lead to kernel crash. Changes From V1: None Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Update For Thermal Page CodeViswas G2-2/+10
Thermal page code has been changed to 7 for the 12G controllers. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Corrected device state changes in I_T_Nexus_Reset.Viswas G2-5/+21
In Nexus reset the device state request are not needed. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Updated link rateViswas G2-0/+5
Updated 12G linkrate to libsas. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12pm80xx: Added pm8006 controller supportSuresh Thiagarajan2-2/+6
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Viswas G <Viswas.G@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-31scsi: Do not set cmd_per_lun to 1 in the host templateHannes Reinecke1-1/+0
'0' is now used as the default cmd_per_lun value, so there's no need to explicitly set it to '1' in the host template. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-12-18Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley1-1/+0
2014-12-11Merge branch 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds2-2/+2
Pull libata changes from Tejun Heo: "The only interesting piece is the support for shingled drives. The changes in libata layer are minimal. All it does is identifying the new class of device and report upwards accordingly" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Remove FIXME comment in atapi_request_sense() sata_rcar: Document deprecated "renesas,rcar-sata" sata_rcar: Add clocks to sata_rcar bindings ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option libata-scsi: Update SATL for ZAC drives libata: Implement ATA_DEV_ZAC libsas: use ata_dev_classify()
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-27libsas: remove task_collector modeChristoph Hellwig3-21/+6
The task_collector mode (or "latency_injector", (C) Dan Willians) is an optional I/O path in libsas that queues up scsi commands instead of directly sending it to the hardware. It generall increases latencies to in the optiomal case slightly reduce mmio traffic to the hardware. Only the obsolete aic94xx driver and the mvsas driver allowed to use it without recompiling the kernel, and most drivers didn't support it at all. Remove the giant blob of code to allow better optimizations for scsi-mq in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-0/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-0/+1
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-05libsas: use ata_dev_classify()Hannes Reinecke2-2/+2
Use the ata device class from libata in libsas instead of checking the supported command set and switch to using ata_dev_classify() instead of our own method. Cc: Tejun Heo <tj@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-16pm8001: Update nvmd response data to request bufferSuresh Thiagarajan2-3/+9
Instead of using the virt_ptr use request buffer for copying back the nvmd response data and use the same in request function also Signed-off-by: Suresh Thiagarajan <suresh.thiagarajan@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-95/+92
Pull more SCSI changes from James Bottomley: "This is a small set of updates which missed the first pull. It's more msix updates, some iscsi and qla4xxx fixes, we also have some string null termination fixes a return value fix and a couple of pm8001 firmware fixes. Just a note, we do have a couple of bug fixes coming under separate cover, but they don't have to be part of the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: iscsi class: Fix freeing of skb in get host error path scsi: fix u14-34f printk format warnings pm8001: fix pm8001_store_update_fw pm8001: Fix erratic calculation in update_flash pm8001: Update MAINTAINERS list libiscsi: return new error code when nop times out iscsi class: fix get_host_stats return code when not supported iscsi class: fix get_host_stats error handling qla4xxx: fix get_host_stats error propagation qla4xxx: check the return value of dma_alloc_coherent() scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction with strncpy scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction with strncpy qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
2014-08-08scsi: use pci_zalloc_consistentJoe Perches1-3/+2
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: Michael Neuffer <mike@i-Connect.Net> Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-01pm8001: fix pm8001_store_update_fwTomas Henzl2-71/+70
The current implementation may mix the negative value returned from pm8001_set_nvmd with count. -(-ENOMEM) could be interpreted as bytes programmed, this patch fixes it. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01pm8001: Fix erratic calculation in update_flashTomas Henzl1-5/+2
The loopcount is calculated by using some weird magic. Use instead a boring macro. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-19/+20
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Reviewed-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29pm8001: Fix invalid return when request_irq() failedAlexander Gordeev1-2/+3
When a call to request_irq() failed pm8001_setup_msix() still returns the success. This udate fixes the described misbehaviour. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix a memory leak in nvmd_respTomas Henzl1-6/+2
Instead of copying information to fw_control_context free it. The task is forgotten thus also the reference to fw_control_context and the completion thread takes the info from virt_ptr again. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix update_flashTomas Henzl1-3/+3
The driver checks the return valu, but after he tries to wait_for_completion which might never happen. Also the ioctl buffer is freed at the end of the function, so the first removal is not needed. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix a memory leak in flash_updateTomas Henzl1-6/+6
ccb->fw_control_context is copied to local fw_control_context and the local variable is never used later Free ccb->fw_control_context. The task is forgotten thus also the reference to fw_control_context and the completion thread takes the info from virt_ptr again. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Cleaning up uninitialized variablesRickard Strandqvist1-4/+2
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppche Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Fix to remove null pointer checks that could never happenRickard Strandqvist1-1/+1
Removal of null pointer checks that could never happen Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: more fixes to honor return valueTomas Henzl2-3/+24
The driver ignores the return value in a lot of places, fix it at least somewhere (and release the resources in such cases), to avoid that bad things happen. A memory leak is fixed too. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: add a new spinlock to protect the CCBTomas Henzl3-1/+8
Patch adds a new spinlock to protect the ccb management. It may happen that concurrent threads become the same tag value from the 'alloc' function', the spinlock prevents this situation. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: honor return valueTomas Henzl2-17/+58
The driver ignores the return value in a lot of places, fix it at least somewhere (and release the resources in such cases), to avoid that bad things happen. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: clean bitmap management functionsTomas Henzl3-30/+12
In the driver two different functions are used to free the same resource, this patch makes the code easier to read. In addittion to that, some minor optimisations were made too. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Fix hibernation issueBradley Grove1-2/+10
During hibernation, the HBA firmware may lose power and forget the device id info. This causes the HBA to reject IO upon resume. The fix is to call the libsas power management routines to make the domain device forgetful. This fixes bug 76681: https://bugzilla.kernel.org/show_bug.cgi?id=76681 Signed-off-by: Bradley Grove <bgrove@attotech.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-25pm8001: Fix potential null pointer dereference and memory leak.Maurizio Lombardi1-3/+10
The pm8001_get_phy_settings_info() function does not check the kzalloc() return value and does not free the allocated memory. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-11Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds1-1/+1
Pull module updates from Rusty Russell: "Most of this is cleaning up various driver sysfs permissions so we can re-add the perm check (we unified the module param and sysfs checks, but the module ones were stronger so we weakened them temporarily). Param parsing gets documented, and also "--" now forces args to be handed to init (and ignored by the kernel). Module NX/RO protections get tightened: we now set them before calling parse_args()" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: set nx before marking module MODULE_STATE_COMING. samples/kobject/: avoid world-writable sysfs files. drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files. drivers/staging/speakup/: avoid world-writable sysfs files. drivers/regulator/virtual: avoid world-writable sysfs files. drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files. drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files. drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files. drivers/mtd/devices/docg3.c: avoid world-writable sysfs files. speakup: fix incorrect perms on speakup_acntsa.c cpumask.h: silence warning with -Wsign-compare Documentation: Update kernel-parameters.tx param: hand arguments after -- straight to init modpost: Fix resource leak in read_dump()
2014-05-19pm80xx : Fix missing NULL pointer checks and memory leaksSuresh Thiagarajan1-0/+3
Checking return value for the memory allocattion and freeing it while exiting the function Signed-off-by: Viswas G <Viswas.G@pmcs.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-14drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.Rusty Russell1-1/+1
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Lindar Liu <lindar_liu@usish.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-19[SCSI] remove deprecated IRQF_DISABLED from SCSIMichael Opdenacker1-2/+0
It's a NOOP since 2.6.35 and it will be removed one day. [jejb: remove from missed arm scsi drivers] Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: fix problem of pm8001_work_fn reseting incorrect phy deviceXinHong Zhu1-0/+1
If a phy device is removed, the device can get error of I/O and HBA maybe receieve IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS of event which causes pm8001_work_fn to reset the phy device but in pm8001_task_exec we don't assign a value for the device field of the ccb and in other case a ccb used have device field set, when ccb is freed the field device of the ccb don't be set NULL.So there is possibility of getting another device reset in function mpi_ssp_completion. Signed-off-by: zhuxh <zxh3737@163.com> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: no need for tag allocation when issuing the command of unregistering deviceXinHong Zhu1-2/+0
In function pm8001_dev_gone_notify we consume a tag from bitmap resource and later don't free that tag resource, so the tag resource will never be freed. In the function we don't need to use any tag to issue command for unregistering the device . Signed-off-by: XinHong Zhu <zxh3737@163.com> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: Spinlock fixSuresh Thiagarajan3-142/+38
spin_lock_irqsave for the HBA lock is called in one function where flag is local to that function. Another function is called from the first function where lock has to be released using spin_unlock_irqrestore for calling task_done of libsas. In the second function also flag is declared and used. For calling task_done there is no need to enable the irq. So instead of using spin_lock_irqsave and spin_unlock_irqrestore, spin_lock and spin_unlock is used now. This also avoids passing the flags across all the functions where HBA lock is being used. Also removed redundant code. Reported-by: Jason Seba <jason.seba42@gmail.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Viswas G <viswas.g@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: Enable BAR shift to avoid BIOS conflict with MPI space for ATTO pm8001 based HBAs.Bradley Grove1-3/+3
Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: Read saved WWN from NVMD for ATTO pm8001 based HBAs.Bradley Grove1-5/+5
Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: Fixed return value issueViswas G3-16/+9
pm80xx_get_gsm_dump() was returning "1" in error case instead of negative error value. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] pm80xx: Removing redundant code snippetsViswas G2-30/+11
Removed redundant code snippets in pm8001_hwi.c and pm8001_ctl.c Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-02[SCSI] pm80xx: Tasklets synchronization fix.Nikith Ganigarakoppal2-41/+58
When multiple vectors are used, the vector variable is over written, resulting in unhandled operation for those vectors. This fix prevents the problem by maitaining HBA instance and vector values for each irq. [jejb: checkpatch fixes] Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-02[SCSI] pm80xx: Resetting the phy state.Nikith Ganigarakoppal4-0/+10
Setting the phy state for hard reset response. After sending hard reset for a device ,phy down event sets the phy state to zero but for phy up event it will not set the phy state again.This will cause problem to successive hard resets. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-02[SCSI] pm80xx: Fix for direct attached device.Nikith Ganigarakoppal1-1/+3
In case of direct attached SATA device delay is not enough. It will give crash for set device state command response and wait_for_completion is the best solution for this. Signed-off-by: Nikith.Ganigarakoppal@pmcs.com Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.