aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qedf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-18/+20
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-16scsi: qedf: Switch to attribute groupsBart Van Assche3-5/+14
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-38-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16scsi: qedf: Call scsi_done() directlyBart Van Assche1-13/+6
Conditional statements are faster than indirect calls. Hence call scsi_done() directly. Link: https://lore.kernel.org/r/20211007202923.2174984-64-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin6-18/+18
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24qed: Don't ignore devlink allocation failuresLeon Romanovsky1-0/+2
devlink is a software interface that doesn't depend on any hardware capabilities. The failure in SW means memory issues, wrong parameters, programmer error e.t.c. Like any other such interface in the kernel, the returned status of devlink APIs should be checked and propagated further and not ignored. Fixes: 755f982bb1ff ("qed/qede: make devlink survive recovery") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16scsi: qedf: Fix error codes in qedf_alloc_global_queues()Dan Carpenter1-5/+5
This driver has some left over "return 1" on failure style code mixed with "return negative error codes" style code. The caller doesn't care so we should just convert everything to return negative error codes. Then there was a problem that there were two variables used to store error codes which just resulted in confusion. If qedf_alloc_bdq() returned a negative error code, we accidentally returned success instead of propagating the error code. So get rid of the "rc" variable and use "status" every where. Also remove the "status = 0" initialization so that these sorts of bugs will be detected by the compiler in the future. Link: https://lore.kernel.org/r/20210810085023.GA23998@kili Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-7/+1
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-36-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-9/+27
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
2021-07-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-11/+6
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
2021-06-29scsi: qedf: Add check to synchronize abort and flushJaved Hasan1-1/+21
A race condition was observed between qedf_cleanup_fcport() and qedf_process_error_detect()->qedf_initiate_abts(): [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0 [2069091.233420] Oops: 0000 [#1] SMP [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P OE ------------ 3.10.0-1160.25.1.el7.x86_64 #1 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>] [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.443666] RSP: 0018:ffff9bacaef9fdb8 EFLAGS: 00010246 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040 [2069091.529472] FS: 0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000 [2069091.543926] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2069091.602007] PKRU: 00000000 [2069091.616010] Call Trace: [2069091.629902] [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf] [2069091.643941] [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf] [2069091.657948] [<ffffffff85ebddcf>] process_one_work+0x17f/0x440 [2069091.672111] [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0 [2069091.686057] [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0 [2069091.700033] [<ffffffff85ec5da1>] kthread+0xd1/0xe0 [2069091.713891] [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40 Add check in qedf_process_error_detect(). When flush is active, let the cmds be completed from the cleanup contex. Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22scsi: qedf: Use DEVICE_ATTR_RO() macroZhen Lei1-8/+6
Use DEVICE_ATTR_RO() macro helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210616034419.725-3-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-10scsi: qedf: Add vendor identifier attributeJaved Hasan1-0/+3
Link: https://lore.kernel.org/r/20210603121623.10084-3-jhasan@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-07scsi: qedf: Update the max_id value in host structureSaurav Kashyap1-0/+2
host->max_id defines the maximum target id that the SCSI midlayer will attempt to manually scan. The default is 8. Update the value to the max sessions the driver supports. [mkp: applied by hand] Link: https://lore.kernel.org/r/20210602104653.17278-1-jhasan@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-01scsi: qedf: Do not put host in qedf_vport_create() unconditionallyDaniel Wagner1-11/+9
Do not drop reference count on vn_port->host in qedf_vport_create() unconditionally. Instead drop the reference count in qedf_vport_destroy(). Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de Reported-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-21scsi: qedf: Use vzalloc() instead of vmalloc()/memset(0)Yang Yingliang1-2/+1
Use vzalloc() instead of vmalloc() and memset(0) to simpify the code. Link: https://lore.kernel.org/r/20210518132018.1312995-1-yangyingliang@huawei.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-14scsi: qedf: Add pointer checks in qedf_update_link_speed()Javed Hasan1-1/+3
The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data. Link: https://lore.kernel.org/r/20210512072533.23618-1-jhasan@marvell.com Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-14scsi: qedf: Drop unnecessary NULL checks after container_of()Guenter Roeck2-9/+0
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure, which is not the case here. The NULL checks are therefore unnecessary and misleading. Remove them. The changes in this patch were made automatically using the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Link: https://lore.kernel.org/r/20210510041211.2051325-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Use devlink to report errors and recoveryJaved Hasan1-2/+3
Use devlink_health_report() to push error indications. Implement this in qede via a callback function to make it possible to reuse it for other drivers sitting on top of qed in future. Also remove forcible recovery trigger and put it as a normal devlink callback in qed module. This allows user to enable/disable it via: devlink health set pci/xxxx:xx:xx.x reporter fw_fatal auto_recover false Link: https://lore.kernel.org/r/20210331164917.24662-3-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Enable devlink supportJaved Hasan2-0/+14
Devlink instance lifetime was linked to qed_dev object. That caused devlink to be recreated on each recovery. Change it by making higher level driver (qede) responsible for lifetime management. This way devlink survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Link: https://lore.kernel.org/r/20210331164917.24662-2-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: qedf: Remove unused include of linux/version.hTian Tao2-3/+0
Remove unnecessary include of linux/version.h. Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qedf: Simplify bool comparisonYANG LI1-1/+1
Fix the following coccicheck warning: ./drivers/scsi/qedf/qedf_main.c:3716:5-31: WARNING: Comparison to bool Link: https://lore.kernel.org/r/1610357368-62866-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-29scsi: libfc: Move scsi/fc_encode.h to libfcArnd Bergmann1-1/+0
Most of this file is only used inside of libfc, so move it to where it is actually used, with only fc_fill_fc_hdr() left inside of the header. Link: https://lore.kernel.org/r/20201026160705.3706396-1-arnd@kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-02scsi: qedf: Remove redundant assignment to variable 'rc'Jing Xiangfeng1-1/+0
This assignment is meaningless. Remove it. Link: https://lore.kernel.org/r/20200917021906.175933-1-jingxiangfeng@huawei.com Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-15Merge branch '5.9/scsi-fixes' into 5.10/scsi-ufsMartin K. Petersen1-1/+1
Resolve UFS discrepancies between fixes and queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Retry qed->probe during recoverySaurav Kashyap1-0/+11
During recovery due to FCoE fn ramrod failure we wait for 2 sec and then call qed->probe. If probe fails then retry max 10 times. Link: https://lore.kernel.org/r/20200907121443.5150-8-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Add schedule_hw_err_handler callback for fan failureSaurav Kashyap2-0/+49
On fan failure, disable the PCI function and initiate recovery for ramrod failure. Link: https://lore.kernel.org/r/20200907121443.5150-7-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Return SUCCESS if stale rport is encounteredSaurav Kashyap1-1/+1
If SUCCESS is not returned, error handling will escalate. Return SUCCESS similar to other conditions in this function. Link: https://lore.kernel.org/r/20200907121443.5150-6-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: FDMI attributes correctionJaved Hasan2-25/+58
Correction in the FDMI attributes required for RHBA and RPA registration. Link: https://lore.kernel.org/r/20200907121443.5150-5-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Fix for the session’s E_D_TOV valueJaved Hasan1-1/+1
Firmware expects E_D_TOV field in connection offload parameters as “msec”. Earlier incorrect value (100ms), was leading to abort from driver in the case when data frames for read take more than 100ms from target side, resulting in firmware reporting E_D_TOV expiration. Link: https://lore.kernel.org/r/20200907121443.5150-4-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Correct the comment in qedf_initiate_elsSaurav Kashyap1-1/+1
Correct the misleading comment in qedf_initiate_els(). Link: https://lore.kernel.org/r/20200907121443.5150-3-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-08scsi: qedf: Change the debug parameter permission to read & writeJaved Hasan1-1/+1
Change the debug parameter permission to read & write. Gives flexibility to change the debug verbosity dynamically. Link: https://lore.kernel.org/r/20200907121443.5150-2-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-24scsi: qedf: Fix null ptr reference in qedf_stag_change_workYe Bin1-1/+1
Link: https://lore.kernel.org/r/20200824033436.45570-1-yebin10@huawei.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Fix race between ELS completion and flushing ELS requestSaurav Kashyap2-0/+16
Fix race between ELS completion and flushing ELS request. Link: https://lore.kernel.org/r/20200807110656.19965-8-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Don't process ELS completion if event is flushed or cleaned upSaurav Kashyap1-0/+9
Don't process ELS completion if event is flushed or cleaned up. Link: https://lore.kernel.org/r/20200807110656.19965-7-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Initiate cleanup for ELS commands as wellSaurav Kashyap1-0/+7
Initiate cleanup for ELS commands as well. Link: https://lore.kernel.org/r/20200807110656.19965-6-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Send cleanup even for RRQ on timeoutSaurav Kashyap1-1/+1
Send cleanup even for RRQ on timeout. Link: https://lore.kernel.org/r/20200807110656.19965-5-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Do not kill timeout work for original I/O on RRQ completionSaurav Kashyap1-4/+0
The timer is already cancelled when abort is completed, hence no need to cancel it again. Link: https://lore.kernel.org/r/20200807110656.19965-4-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Check the validity of rjt frame before processingSaurav Kashyap1-0/+5
This is reported by Klockwork. Link: https://lore.kernel.org/r/20200807110656.19965-3-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Check for port type and role before processing an eventSaurav Kashyap1-0/+11
The rport lock gets initialized during offload. If a non-FCP or non-target rport got logout then this rport will be uninitialized. KASAN was complaining because of it. ========= [ 14.384434] the code is fine but needs lockdep annotation. [ 14.384482] turning off the locking correctness validator. ======== Link: https://lore.kernel.org/r/20200807110656.19965-2-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-42/+16
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-07-20qed, qede, qedf: convert link mode from u32 to ETHTOOL_LINK_MODEAlexander Lobakin1-28/+50
Currently qed driver already ran out of 32 bits to store link modes, and this doesn't allow to add and support more speeds. Convert custom link mode to generic Ethtool bitmap and definitions (convenient Phylink shorthands are used for elegance and readability). This allowed us to drop all conversions/mappings between the driver and Ethtool. This involves changes in qede and qedf as well, as they used definitions from shared "qed_if.h". Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-10/+8
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'qedf' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'dops' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'fops' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:51: warning: Function parameter or member 'qedf_dbg' not described in 'qedf_dbg_host_exit' drivers/scsi/qedf/qedf_debugfs.c:51: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_exit' drivers/scsi/qedf/qedf_debugfs.c:64: warning: Function parameter or member 'drv_name' not described in 'qedf_dbg_init' Link: https://lore.kernel.org/r/20200713074645.126138-23-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Remove a whole host of unused variablesLee Jones1-26/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_io.c: In function ‘qedf_cmd_timeout’: drivers/scsi/qedf/qedf_io.c:25:5: warning: variable ‘op’ set but not used [-Wunused-but-set-variable] 25 | u8 op = 0; | ^~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_map_sg’: drivers/scsi/qedf/qedf_io.c:490:12: warning: variable ‘end_addr’ set but not used [-Wunused-but-set-variable] 490 | u64 addr, end_addr; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_post_io_req’: drivers/scsi/qedf/qedf_io.c:863:22: warning: variable ‘req_type’ set but not used [-Wunused-but-set-variable] 863 | enum fcoe_task_type req_type = 0; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_completion’: drivers/scsi/qedf/qedf_io.c:1134:31: warning: variable ‘task_ctx’ set but not used [-Wunused-but-set-variable] 1134 | struct e4_fcoe_task_context *task_ctx; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_done’: drivers/scsi/qedf/qedf_io.c:1345:6: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable] 1345 | u16 xid; | ^~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_abts’: drivers/scsi/qedf/qedf_io.c:1866:6: warning: variable ‘r_a_tov’ set but not used [-Wunused-but-set-variable] 1866 | u32 r_a_tov = 0; | ^~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_abts_compl’: drivers/scsi/qedf/qedf_io.c:1967:11: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable] 1967 | uint16_t xid; | ^~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_cleanup’: drivers/scsi/qedf/qedf_io.c:2163:31: warning: variable ‘task’ set but not used [-Wunused-but-set-variable] 2163 | struct e4_fcoe_task_context *task; | ^~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_unsol_compl’: drivers/scsi/qedf/qedf_io.c:2534:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] 2534 | uint16_t tmp; | ^~~ Link: https://lore.kernel.org/r/20200713074645.126138-17-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Remove set but not checked variable 'tmp'Lee Jones1-3/+2
Looks like the return value of readw() has never been checked. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3203:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713074645.126138-10-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-3/+2
No attempt has been made to document either of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'lport' not described in 'qedf_xmit' drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'fp' not described in 'qedf_xmit' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'lport' not described in 'qedf_rport_event_handler' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'rdata' not described in 'qedf_rport_event_handler' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'event' not described in 'qedf_rport_event_handler' Link: https://lore.kernel.org/r/20200713074645.126138-9-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-13Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-1/+1
Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-02scsi: qedf: Remove redundant initialization of variable rcColin Ian King1-1/+1
The variable rc is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20200527115242.172344-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Get dev info after updating the paramsSaurav Kashyap1-0/+7
An update to pf params can change the devinfo. Get updated device information. [mkp: updated error message spotted by Sergei Shtylyov] Link: https://lore.kernel.org/r/20200416084314.18851-10-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probingChad Dupuis2-4/+32
The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.