aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_glbl.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-12-07scsi: qla4xxx: switch to pci_alloc_irq_vectorsChristoph Hellwig1-1/+0
And simplify the MSI-X logic in general - just request the two vectors directly instead of going through an indirection table. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke1-2/+2
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla4xxx: Export sysfs DDBs from DPC handlerNilesh Javali1-0/+1
Issue: modprobe qla4xxx is killed by systemd due to timeout. Solution: The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of approximately 15s due to which system-udevd killed the modprobe of the driver. Added fix to export the sysfs DDBs from the DPC handler. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla4xxx: Added PEX DMA Support for ISP8022 AdapterTej Parkash1-1/+1
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] qla4xxx: Print WARN_ONCE() if iSCSI function presence bit removedVikas Chaudhary1-0/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla4xxx: ISP8xxx: Correct retry of adapter initializationNilesh Javali1-0/+1
Issue: For ISP8xxx, adapter initialization is not retried if qla4xxx_initialize_adapter fails. Fix: If qla4xxx_initialize_adapter fails, first check if failure is due to IRQs not attached in order to skip retrial, then free the IRQs and then retry initializing the adapter. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla4xxx: Added support for Diagnostics MBOX commandVikas Chaudhary1-0/+2
Added support for Diagnostics MBOX command via BSG Vendor HST_VENDOR interface. This command provides various tests for validating hardware functionality. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16[SCSI] qla4xxx: Add support for additional network parameters settingsHarish Zunjarrao1-0/+1
Added support to display and update additional network parameters through iscsiadm. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] qla4xxx: Add support to set CHAP entriesAdheer Chandravanshi1-0/+2
Provide support to add/update the CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Add pex-dma support for capturing minidumpSantosh Vernekar1-0/+2
Add pex-dma support for ISP8324 and ISP8042 to improve the minidump capture time. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Update Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Implementation of ACB configuration during Loopback for ISP8042Nilesh Javali1-0/+6
While loopback diagnostic is in progress, disable the ACB which resets all the active connections to target. Disable ACB would filter out all the DHCP multicast and broadcast packets which otherwise cause the diagnostic test to take longer time to complete or failures in some other cases. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] qla4xxx: Add flash node mgmt supportAdheer Chandravanshi1-0/+7
This patch allows iscsiadm to manage iSCSI target information stored on qla4xxx adapter flash on per host basis. Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-10[SCSI] qla4xxx: Fixed request queue count manipulation on response pathTej Parkash1-2/+0
Issue: Request queue count holds the information about free space in request queue which has to be manipulated based on request in and out pointer. But in driver response path, this count was incremented unconditionally, which could move req_in pointer beyond req_out pointer. This scenario leads fw hang during IO. Solution: Request queue count manipulation has to be done in IO path only, keeping req_in and req_out pointer two IOCB count away Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Added support for force firmware dumpVikas Chaudhary1-0/+1
This patch force driver to collect firmware dump using following command:- "echo 2 > /sys/class/scsi_host/hostX/device/fw_dump" Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] qla4xxx: Fix MBOX intr switching from polling to intr mode for ISP83XXVikas Chaudhary1-2/+3
Issue: Mailbox command timed out after switching from polling mode to interrupt mode. Events:- 1. Mailbox interrupts are disabled 2. FW generates AEN and at same time driver enables Mailbox Interrupt 3. Driver issues new mailbox to Firmware In above case driver will not get AEN interrupts generated by FW in step #2 as FW generated this AEN when interrupts are disabled. During the same time driver enabled the mailbox interrupt, so driver will not poll for interrupt. Driver will never process AENs generated in step #2 and issues new mailbox to FW, but now FW is not able to post mailbox completion as AENs generated before are not processed by driver. Fix: Enable Mailbox / AEN interrupts before initializing FW in case of ISP83XX. This will make sure we process all Mailbox and AENs in interrupt mode. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Disable generating pause frames for ISP83XXTej Parkash1-0/+1
In case of FW hung ISP83XX generates continuous pause frames which causes switch to disable port. Added fix to disable generating pause frames in case of FW hung Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: IDC implementation for LoopbackNilesh Javali1-0/+1
Handle IDC Request Notify AEN and post IDC Acknowledgement while participating in Loopback IDC. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update idc reg in case of PCI AERVikas Chaudhary1-0/+1
Camram is reset by FW to default values after reboot/cold boot/pci reset. In case of AER, PCI may need to reset so we need to set correct idc reg value after PCIE error. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Added new mbox cmd to pass driver version to FWManish Dusane1-0/+1
Signed-off-by: Manish Dusane <manish.dusane@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Added support for ISP83XXVikas Chaudhary1-0/+41
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Added new functions in isp_opsVikas Chaudhary1-1/+12
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update function name from 8xxx to 82xxVikas Chaudhary1-18/+18
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] qla4xxx: Fix a Sparse warning messageVikas Chaudhary1-1/+2
Fix following message:- drivers/scsi/qla4xxx/ql4_os.c:3266:5: error: symbol 'qla4xxx_post_aen_work' redeclared with different type (originally declared at drivers/scsi/qla4xxx/ql4_glbl.h:186) - incompatible argument 2 (different signedness) Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-30[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failureTej Parkash1-0/+8
Added support to capture dump (Minidump) which allows us to catpure a snapshot of the firmware/hardware states at the time of firmware failure Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] qla4xxx: Export CHAP index as sysfs attributeMike Christie1-0/+2
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla4xxx: Added ping supportVikas Chaudhary1-0/+5
Added ping support for network connection diagnostics. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla4xxx: added support for host eventVikas Chaudhary1-0/+2
Added support to post kernel host event to application using netlink interface. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-14[SCSI] qla4xxx: fix flash/ddb supportMike Christie1-1/+15
With open-iscsi support, target entries persisted in the FLASH were not login. Added support in the qla4xxx driver to do the login on probe time to the target entries saved in the FLASH by user. With this changes upgrade to the new kernel with open-iscsi support in qla4xxx will ensure users original target entries login on driver load Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Added Get ACB support using BSGHarish Zunjarrao1-2/+2
This command is used to read ACB params from firmware Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Added restore factory defaults support using BSGHarish Zunjarrao1-0/+3
This command will causes the firmware to update all configurations to pre-defined factory default settings. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Add read/update NVRAM support for 40xx adapters using BSGHarish Zunjarrao1-0/+4
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Add get ACB state support using BSGHarish Zunjarrao1-0/+2
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Boot from SAN support for open-iscsiManish Rangankar1-0/+7
Hook qla4xxx in fw boot sysfs interface so iscsi tools can use the info to create boot sessions. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Remove reduandant code after open-iscsi integration.Manish Rangankar1-11/+1
1. Remove device database entry (ddb) state. 2. Remove device database (DDB) list building. With open-iscsi integration the logins to the target devices are handled by the user space. So the information of target is now maintained in the iscsi_session object. This is handled at libiscsi level so there is no need to maintain a list of DDBs in the qla4xxx LLD. 3. qla4xxx: Remove add_device_dynamically. Since autologin in FW is disabled with open-iscsi integration, driver will never get an AEN for which driver has not requested a DDB index. So remove the add_device_dynamically function. 4. Remove qla4xxx_tgt_dscvr Since firmware autologin is disabled this function will not work. Now user has the ability to do the target discovery and login to each target individually. Firwmare will not do the login on its own. 5. Remove relogin related code All relogin is handled by userspace now. qla4xxx just need to notify userspace of a connection failure, this triggers the relogin. 6. Remove add_session and alloc_session Now qla4xxx uses iscsi_session_setup that would do the necessary allocations for session and ddb_entry. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: support iscsiadm session mgmtManish Rangankar1-4/+17
Add scsi_transport_iscsi hooks in qla4xxx to support iSCSI session management using iscsiadm. This patch is based on discussion here http://groups.google.com/group/open-iscsi/browse_thread/thread/e89fd888baf656a0# Now users can use iscsiadm to do target discovery and do login/logout to individual targets using the qla4xxx iSCSI class interface. This patch leaves some dead code, but to make it easier to review we are leaving and in the next patch we will remove that old code. V2 - NOTE: Added code to avoid waiting for AEN during login/logout in the driver, instead added a kernel to user event to notify iscsid about login status. Because of this iscsid will not get blocked. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: add bsg supportVikas Chaudhary1-0/+4
This patch adds bsg support to qla4xxx. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: add support for set_net_configMike Christie1-2/+18
Allows user space (iscsiadm) to send down network configuration parameters for LLD to set private network configuration on the iSCSI adapters. Based on patches from Vikas Chaudhary. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] qla4xxx: Added vendor specific sysfs attributesHarish Zunjarrao1-1/+2
Added fw_version, serial_num, iscsi version and boot loader version sysfs attributes. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-03-23[SCSI] qla4xxx: cleanup DDB relogin logic during initializationKaren Higgins1-1/+0
Driver has capability to add device dynamically and present them to OS, driver no longer need to wait for DDBs to come online during driver initialization. Driver still issues a relogin for DDBs that are not online, but no longer wait for DDB to come online. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: Updated the Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: dump mailbox registers on System ErrorKaren Higgins1-0/+1
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-20drivers/scsi/qla4xxx: fix buildAndrew Morton1-1/+1
gcc-4.0.2: drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery': drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06[SCSI] qla4xxx: Added AER support for ISP82xxLalit Chandivade1-0/+1
Added support for PCI error handling Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenariosNilesh Javali1-0/+1
Outstanding mailbox commands, have no way to recover on f/w hung, and we timeout on waiting for mbx response. This in turn affects the recovery process as follows: - We might already be in dpc while waiting for mbx to complete, so recovery for that pci function will never get invoked. Reset Timeout (10 sec) is far less than mbx timeout (30 sec). - Other mbx cmds will get stuck due to serial mbx access. Solution is to identify fw-hung scenario and handle outstanding mbx commands to have an early-exit instead of waiting for response. Other mbx commands waiting for access will also do an early-exit if fw-hung is still applicable. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: Added support for ISP82XXVikas Chaudhary1-24/+82
Signed-off-by: Vikas Chaudhary <Vikas Chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02[SCSI] qla4xxx: added support for abort task management commandVikas Chaudhary1-1/+2
* Handles SCSI command aborts. * Serialization srb between error handler and command completion path. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02[SCSI] qla4xxx: do not retry login to CHAP auth failed targetsVikas Chaudhary1-2/+3
Per RFC 3720, Login Response Status Code 0x02 should not be retried. Condensed connection error checking code to a single routine, and added check for status class 0x02. Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2008-04-07[SCSI] qla4xxx: fix scsi command completion, lun reset and target reset codeDavid C Somayajulu1-0/+2
This patch contains the following: 1. when hba completion status is good, check for iscsi transport errors (underflow/overflow) prior to checking the scsi status 2. New firmware requires that one marker iocb be issued for each task management command. The patch issues marker iocb immediately following a LUN or Target reset. Signed-off-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.