aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-12-21[SCSI] qla4xxx: Update driver version to 5.02.00-k5Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: Updated the Copyright headerVikas Chaudhary16-18/+18
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: do not reset hba if ql4xdontresethba is setVikas Chaudhary1-7/+9
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: do not check for fw hung if reset retry is in progressLalit Chandivade1-1/+3
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: cache new IP address acquired via DHCPPrasanna Mumbai1-1/+2
Prior to firmware state change from ACQUIRING to READY, an 0x8029 AEN is received. Added code to check previous state being ACQUIRING in order to update the ip address in the driver. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: Fail initialization if qla4_8xxx_pci_mem_write_2M failsLalit Chandivade1-6/+11
Since if fw load is failing, running on incomplete fw load would be fatal. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: put device in FAILED state for 82XX initialization failureLalit Chandivade1-0/+8
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: do not process interrupt unconditionallyLalit Chandivade1-17/+1
in mailbox command do not process interrupt unconditionally, process interrupt only in polling mode Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: use correct fw_ddb_index in abort taskKaren Higgins2-3/+2
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: memory wedge with peg_halt test in loopSwapnil Nagle1-0/+43
Signed-off-by: Swapnil Nagle <swapnil.nagle@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: initialize MSI in correct wayShyam Sundar1-1/+1
IRQF_SHARED flag should not be set when calling request_irq for MSI since this interrupt mechanism cannot be shared like standard INTx Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: Drop use of IRQF_DISABLEVikas Chaudhary1-2/+2
IRQF_DISABLE flag is deprecated and this flag is a NOOP in kernel. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-11-16SCSI host lock push-downJeff Garzik1-3/+4
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26[SCSI] qla4xxx: Fix cmd check in qla4xxx_cmd_waitMike Christie1-1/+7
If the command has timedout then the block layer has called blk_mark_rq_complete. If qla4xxx_cmd_wait is then called from qla4xxx_eh_host_reset, we will always fail, because if the driver calls scsi_done then the the block layer will fail at blk_complete_request's blk_mark_rq_complete call instead of calling the normal completion path including the function, blk_queue_end_tag, which releases the tag. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Update driver version to 5.02.00-k4Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: grab hardware_lock in eh_abort before accessing srbMike Christie1-3/+6
grab hardware_lock in eh_abort before accessing srb to avoid race between command completion and get refcount on srb. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: remove unwanted check for bad spdVikas Chaudhary2-20/+0
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: update AER support for ISP82XXVikas Chaudhary2-35/+29
* Cleanup qla4xxx_pci_mmio_enabled(): don't want to return PCI_ERS_NEED_RESET if firmware hung. IDC will take care of it. * Request irq after initialize_adapter() in qla82xx_error_recovery(). * Return all active commands from qla4xxx_pci_error_detected(). * Cleanup ql4_def.h Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Clear the rom lock if the firmware died while holding it.Shyam Sundar1-6/+43
There is a possibility that the firmware dies while the rom lock is held. The only way to recover from this condition is to forcefully unlock. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: use CRB Register for Request Queue in-pointerShyam Sundar5-30/+16
Switching from doorbell mechanism to CRB register based Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: dump mailbox registers on System ErrorKaren Higgins3-0/+104
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Add support for 8130/8131 AENs.Shyam Sundar2-0/+14
AEN 8130 Corresponds to an event representing the insertion (detection) of a transceiver. It also reports the type of the SFP+. AEN 8131 corresponds to the removal of a transceiver. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Reset seconds_since_last_heartbeat correctly.Lalit Chandivade1-1/+3
The seconds_since_last_heartbeat should be checked for consecutive heartbeat checks. Currently it could happen that it gets set to max (2 seconds) for non-consecutive heartbeat checks. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: On firmware hang do not wait for the outstanding commands to completeNilesh Javali1-2/+4
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: free_irqs on failed initialize_adapterVikas Chaudhary1-0/+6
Since interrupts are registered in start_firmware(load_risc) for 82xx, free them if init_firmware fails. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: correct data type of sense_len in qla4xxx_status_cont_entryVikas Chaudhary1-1/+1
change data type of sense_len from uint8_t to uint16_t Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: remove "ha->retry_reset_ha_cnt" from wait_for_hba_onlineVikas Chaudhary1-2/+0
remove "ha->retry_reset_ha_cnt" from wait_for_hba_online as its initialize to zero at driver init time so it could always return QLA_ERROR from wait_for_hba_online() without waiting for hba to come online. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: honor return status of qla4xxx_hw_resetVikas Chaudhary1-2/+5
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Trivial cleanupVikas Chaudhary5-22/+12
* cleanup function qla4xxx_recovery_timeout - No need to wakeup dpc thread from function qla4xxx_recovery_timeout() as we are not doing anything in do_dpc() thread when wakeup from qla4xxx_recovery_timeout() * cleanup function qla4xxx_wait_for_hba_online - Remove hard coded value from qla4xxx_wait_for_hba_online(). * cleanup function qla4xxx_start_firmware_from_flash - display seconds * cleanup function qla4_8xxx_load_risc - Remove redundant code. * cleanup function qla4xxx_get_firmware_status - update debug statement * cleanup function qla4_8xxx_try_start_fw - update return status Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-07[SCSI] qla4xxx: fix build on PPCJiri Slaby1-0/+1
We use read/write[bslq] but do not include linux/io.h. This causes build failures on PPC. Include that file. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Stable Tree <stable@kernel.org> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-20drivers/scsi/qla4xxx: fix buildAndrew Morton2-2/+2
gcc-4.0.2: drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery': drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11[SCSI] qla4xxx: fix compilation warningVikas Chaudhary1-1/+2
Fix following warning: drivers/scsi/qla4xxx/ql4_nx.c: In function 'qla4_8xxx_get_flash_info': drivers/scsi/qla4xxx/ql4_nx.c:1952: warning: 'mid' may be used uninitialized in this function drivers/scsi/qla4xxx/ql4_nx.c:1952: note: 'mid' was declared here drivers/scsi/qla4xxx/ql4_nx.c:1952: warning: 'fid' may be used uninitialized in this function drivers/scsi/qla4xxx/ql4_nx.c:1952: note: 'fid' was declared here Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Update driver version to 5.02.00-k3Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Added AER support for ISP82xxLalit Chandivade7-4/+352
Added support for PCI error handling Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenariosNilesh Javali5-0/+47
Outstanding mailbox commands, have no way to recover on f/w hung, and we timeout on waiting for mbx response. This in turn affects the recovery process as follows: - We might already be in dpc while waiting for mbx to complete, so recovery for that pci function will never get invoked. Reset Timeout (10 sec) is far less than mbx timeout (30 sec). - Other mbx cmds will get stuck due to serial mbx access. Solution is to identify fw-hung scenario and handle outstanding mbx commands to have an early-exit instead of waiting for response. Other mbx commands waiting for access will also do an early-exit if fw-hung is still applicable. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.xVikas Chaudhary2-11/+12
Also, changed boundary checking from size of total structure to verification that we received the amount of data needed to cache inernally. This change will provide compatibility with mbx_sys_info structure sizes in both older and newer firmware versions. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpcVikas Chaudhary1-1/+3
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Stop firmware before doing init firmware.Lalit Chandivade1-0/+6
If BIOS is enabled then drivers init firmware fails since BIOS has done the init once. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Use the correct request queue.Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: set correct value in sess->recovery_tmoVikas Chaudhary4-9/+7
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-04Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-07-28[SCSI] iscsi_transport: wait on session in error handler pathMike Christie1-1/+10
wait for session to come online in eh_device_reset_handler and eh_target_reset_handler Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: Update driver version to 5.02.00-k2Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] iscsi_transport: added new iscsi_param to display target alias in sysfsVikas Chaudhary2-1/+9
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: wait for device_ready before device discoveryKaren Higgins1-3/+3
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: replace all dev_info, dev_warn, dev_err with ql4_printkVikas Chaudhary4-61/+63
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: Added support for ISP82XXVikas Chaudhary15-357/+4600
Signed-off-by: Vikas Chaudhary <Vikas Chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla4xxx: Handle one H/W Interrupt at a timeRavi Anand1-1/+1
Handle one H/W Interrupt at a time to prevent holding off H/W lock for longer period of time. Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla4xxx: Fix the freeing of the buffer allocated for DMAPrasanna Mumbai2-21/+32
Fixed the DMA allocated memory freeing which wasn't taken care in many cases. Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla4xxx: correct return status in function qla4xxx_fw_readyVikas Chaudhary1-0/+1
Handle fw_state "auto discovery in progress" correctly to avoid marking adapter as offline. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.