aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_debug.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+4
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-18scsi: remove the use_clustering flagChristoph Hellwig1-1/+2
The same effects can be achieved by setting the dma_boundary to PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those settings into the drivers. Note that in many cases the setting might be bogus, but this keeps the status quo. [mkp: fix myrs and myrb] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: introduce a max_segment_size host_template parametersChristoph Hellwig1-1/+1
This allows the host driver to indicate the maximum supported segment size in a nice an easy way, so that the driver doesn't have to worry about DMA-layer imposed limitations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig1-3/+2
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07scsi: kill off the legacy IO pathJens Axboe1-2/+1
This removes the legacy (non-mq) IO path for SCSI. Cc: linux-scsi@vger.kernel.org Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-19/+38
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-07-30scsi: scsi_debug: add cmd abort option to every_nthDouglas Gilbert1-15/+32
This patch is motivated by a response in the thread: Re: [PATCH 0/5]stop normal completion path entering a timeout req by Jianchao Wang . It generalizes the error injection of blk_abort_request() to use scsi_debug's "every_nth" mechanism. Ref with original patch to scsi_debug: https://lore.kernel.org/lkml/a68ad043-26a1-d3d8-2009-504ba4230e0f@oracle.com/ Also convert two vmalloc/memset(0) to vzalloc() calls. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-12scsi: scsi_debug: skip long delays when ndelay smallDouglas Gilbert1-4/+6
A test program's runtime became impractically long since any non zero ndelay (e.g. 1 nanosec) caused Start Stop Unit to delay over 8 magnitudes greater than other commands. This patch skips long delays (on Start Stop Unit and Synchronize Cache) if ndelay is less than or equal to 10 microsecs. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18scsi: scsi_debug: Fix memory leak on module unloadLuis Henriques1-1/+1
Since commit 80c49563e250 ("scsi: scsi_debug: implement IMMED bit") there are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory leak in schedule_resp(), which can be invoked while unloading the scsi_debug module: free_all_queued() had already freed all sd_dp and schedule_resp will alloc a new one, which will never get freed. Here's the kmemleak report while running xfstests generic/350: unreferenced object 0xffff88007d752b00 (size 128): comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s) hex dump (first 32 bytes): 00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............ 00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_... backtrace: [<000000002abd83d0>] 0xffffffffa000705e [<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0 [<000000000c119a00>] scsi_request_fn+0x251/0x550 [<000000009de0c736>] __blk_run_queue+0x3f/0x60 [<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0 [<00000000d17ec79f>] blk_execute_rq+0x3a/0x50 [<00000000a7654b6e>] scsi_execute+0x113/0x250 [<00000000fd78f7cd>] sd_sync_cache+0x95/0x160 [<0000000024dacb14>] sd_shutdown+0x9b/0xd0 [<00000000e9101710>] sd_remove+0x5f/0xb0 [<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0 [<00000000e8ad57b6>] bus_remove_device+0xe9/0x160 [<00000000713a7b8a>] device_del+0x120/0x320 [<00000000e5db670c>] __scsi_remove_device+0x115/0x150 [<00000000eccbef30>] scsi_forget_host+0x20/0x60 [<00000000cd5a0738>] scsi_remove_host+0x6d/0x120 Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Luis Henriques <lhenriques@suse.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-1/+2
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-18scsi: scsi_debug: IMMED related delay adjustmentsDouglas Gilbert1-9/+24
A patch titled: "[PATCH v2] scsi_debug: implement IMMED bit" introduced long delays to the Start stop unit (SSU) and Synchronize cache (SC) commands when the IMMED bit is clear. This patch makes those delays more realistic. It causes SSU to only delay when the start stop state is changed; SC only delays when there's been a write since the previous SC. It also reduced the SC delay from 1 second to 50 milliseconds. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reported-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-05Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-89/+152
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
2018-03-08block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche1-1/+1
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-15scsi: scsi_debug: call resp_*() function after setting host_scribbleMartin Wilck1-20/+33
Error injection in scsi_debug (e.g. opts=16, SDEBUG_OPT_TRANSPORT_ERR) currently doesn't work correctly because the test for sqcp in resp_read_dt0() and similar resp_*() functions always fails. sqcp is set from cmnd->host_scribble, which is set in schedule_resp(), which is called from scsi_debug_queuecommand() after calling the resp_* function. Defer calling resp_*() until after cmnd->host_scribble is set in schedule_resp(). Fixes: c483739430f1 "scsi_debug: add multiple queue support" Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13scsi: scsi_debug: reset injection flags for every_nth > 0Martin Wilck1-1/+6
If every_nth > 0, the injection flags must be reset for commands that aren't supposed to fail (i.e. that aren't "nth"). Otherwise, commands will continue to fail, like in the every_nth < 0 case. Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13scsi: scsi_debug: implement IMMED bitDouglas Gilbert1-11/+65
The Start Stop Unit (SSU) command takes in the order of a second to complete on some SAS SSDs and longer on hard disks. Synchronize Cache (SC) can also take some time. Both commands have an IMMED bit in their cdbs for those apps that don't want to wait. This patch introduces a long delay for those commands when the IMMED bit is clear. Since SC is a media access command then when the fake_rw option is active, its cdb processing is skipped and it returns immediately. The SSU command is not altered by the setting of the fake_rw option. These actions are not changed by this patch. Changes since v1: - clear the cdb mask of SYNCHRONIZE CACHE(16) cdb in byte 1, bit 0 Changes: - add the SYNCHRONIZE CACHE(16) command - together with the existing START STOP UNIT and SYNCHRONIZE CACHE(10) commands process the IMMED bit in their cdbs - if the IMMED bit is set, return immediately - if the IMMED bit is clear, treat the delay parameter as having a unit of one second - in the SYNCHRONIZE CACHE processing do a bounds check Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13scsi: scsi_debug: Fix pointer styling issuesJohn Pittman1-36/+36
Pointer styling issues exposed by checkpatch.pl in scsi_debug.c: ERROR: "foo * bar" should be "foo *bar" Fixed 37 total errors reported. [mkp: fixed typo noticed by Doug] Signed-off-by: John Pittman <jpittman@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13scsi: scsi_debug: Add two new parameters to scsi_debug driverLaurence Oberman1-2/+8
This patch adds two new parameters to the scsi_debug driver. During various fault injection scenarios it would be useful to be able to pick a specific starting sector and number of follow on sectors where a MEDIUM ERROR for reads would be returned against a scsi-debug device. Right now this only works against sector 0x1234 and OPT_MEDIUM_ERR_NUM follow on sectors. However during testing of md-raid and other scenarios I wanted more flexibility. The idea is add 2 new parameters: medium_error_start medium_error_count If medium_error_start is set then we don't use the default of OPT_MEDIUM_ERR_ADDR, but use that set value. If medium_error_count is set we use that value otherwise default to OPT_MEDIUM_ERR_NUM. Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-13scsi: scsi_debug: Simplify request tag decodingBart Van Assche1-26/+11
Since commit 64d513ac31bd ("scsi: use host wide tags by default") all SCSI requests have a tag, whether or not scsi-mq is enabled. Additionally, it is safe to use blk_mq_unique_tag() and blk_mq_unique_tag_to_hwq() for legacy SCSI queues. Since this means that the sdebug_mq_active variable is superfluous, remove it. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-17scsi: scsi_debug: delay stress fixDouglas Gilbert1-26/+46
Introduce a state enum into sdebug_defer objects to indicate which, if any, defer method has been used with the associated command. Also add 2 bools to indicate which of the defer methods has been initialized. Those objects are re-used but the initialization only needs to be done once. This simplifies command cancellation handling. Now the delay associated with a deferred response of a command cannot be changed (once started) by changing the delay (and ndelay) parameters in sysfs. Command aborts and driver shutdown are still honoured immediately when received. [mkp: applied by hand] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: scsi_debug: add resp_write_scat functionDouglas Gilbert1-3/+176
Add resp_write_scat() function to support decoding WRITE SCATTERED (16 and 32). Also weave resp_write_scat() into the cdb decoding logic. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: scsi_debug: ARRAY_SIZE and FF_MEDIA_IODouglas Gilbert1-73/+90
Reviewer suggested using the ARRAY_SIZE macro. That reduced one of the subtle inter-dependencies in the parser's tables. It is important that commands which simulate media access, indicate this in the flags for that command. The flag to do that was FF_DIRECT_IO. On reflection FF_MEDIA_IO seems a more accurate description. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: scsi_debug: do_device_access add sg offset argumentDouglas Gilbert1-7/+8
WRITE SCATTERED needs to take several "bites" out of the data-out buffer. Expand the do_device_access() function to take a sg_skip argument. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: scsi_debug: fix group_number maskDouglas Gilbert1-14/+14
Various cdb masks incorrectly assumed the GROUP NUMBER field was 5 bits long. It is actually 6 bits long. Correct. Also fix mask failure (in same byte) to allow DLD0 in READ(16) and WRITE(16). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: scsi_debug: tab, kstrto changesDouglas Gilbert1-87/+87
Some of my development tools tend to add spaces (my preference) rather than tabs (kernel convention). Running unexpand to clean these spaces up found more of them than checkpatch.pl did. Then checkpatch.pl complained about other style violations in those newly tabbed lines. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-07scsi: scsi_debug: Add support for injecting SCSI_MLQUEUE_HOST_BUSYBart Van Assche1-1/+13
Although it is important to be able to trigger the code in the SCSI core for SCSI_MLQUEUE_HOST_BUSY handling, currently it is nontrivial to trigger that code. Hence this patch that adds a new error injection option to the scsi_debug driver for making the .queue_rq() implementation of this driver return SCSI_MLQUEUE_HOST_BUSY. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-07scsi: scsi_debug: add cdb_len parameterDouglas Gilbert1-5/+87
While testing "sd: Micro-optimize READ / WRITE CDB encoding" patches it was helpful to check various code paths associated with READ/WRITE 6, 10 and 16 byte cdb variants. There seems to be no user space "knobs" to twiddle use_10_for_rw and friends in the scsi_device structure. So add a parameter to scsi_debug called "cdb_len" for this purpose. [mkp: fixed typo] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-04scsi: scsi_debug: remove jiffies_to_timespecArnd Bergmann1-4/+1
There is no need to go through an intermediate timespec to convert to ktime_t when we just want a simple multiplication. This gets rid of one of the few users of jiffies_to_timespec, which I hope to remove as part of the y2038 cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-31scsi: scsi_debug: write_same: fix error reportDouglas Gilbert1-3/+3
The scsi_debug driver incorrectly suggests there is an error with the SCSI WRITE SAME command when the number_of_logical_blocks is greater than 1. It will also suggest there is an error when NDOB (no data-out buffer) is set and the number_of_logical_blocks is greater than 0. Both are valid, fix. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-17scsi: scsi_debug: allow to specify inquiry vendor and modelHannes Reinecke1-8/+17
For testing purposes we need to be able to pass in the inquiry vendor and model. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Doug Gilbert <dgilbert@interlog.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-08treewide: make "nr_cpu_ids" unsignedAlexey Dobriyan1-1/+1
First, number of CPUs can't be negative number. Second, different signnnedness leads to suboptimal code in the following cases: 1) kmalloc(nr_cpu_ids * sizeof(X)); "int" has to be sign extended to size_t. 2) while (loff_t *pos < nr_cpu_ids) MOVSXD is 1 byte longed than the same MOV. Other cases exist as well. Basically compiler is told that nr_cpu_ids can't be negative which can't be deduced if it is "int". Code savings on allyesconfig kernel: -3KB add/remove: 0/0 grow/shrink: 25/264 up/down: 261/-3631 (-3370) function old new delta coretemp_cpu_online 450 512 +62 rcu_init_one 1234 1272 +38 pci_device_probe 374 399 +25 ... pgdat_reclaimable_pages 628 556 -72 select_fallback_rq 446 369 -77 task_numa_find_cpu 1923 1807 -116 Link: http://lkml.kernel.org/r/20170819114959.GA30580@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25scsi: scsi_debug: Remove a set-but-not-used variableBart Van Assche1-2/+1
This patch avoids that gcc reports the following warning when building with W=1: drivers/scsi/scsi_debug.c:2264:15: warning: variable ?pcontrol? set but not used [-Wunused-but-set-variable] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-03Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuidLinus Torvalds1-5/+5
Pull uuid subsystem from Christoph Hellwig: "This is the new uuid subsystem, in which Amir, Andy and I have started consolidating our uuid/guid helpers and improving the types used for them. Note that various other subsystems have pulled in this tree, so I'd like it to go in early. UUID/GUID summary: - introduce the new uuid_t/guid_t types that are going to replace the somewhat confusing uuid_be/uuid_le types and make the terminology fit the various specs, as well as the userspace libuuid library. (me, based on a previous version from Amir) - consolidated generic uuid/guid helper functions lifted from XFS and libnvdimm (Amir and me) - conversions to the new types and helpers (Amir, Andy and me)" * tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits) ACPI: hns_dsaf_acpi_dsm_guid can be static mmc: sdhci-pci: make guid intel_dsm_guid static uuid: Take const on input of uuid_is_null() and guid_is_null() thermal: int340x_thermal: fix compile after the UUID API switch thermal: int340x_thermal: Switch to use new generic UUID API acpi: always include uuid.h ACPI: Switch to use generic guid_t in acpi_evaluate_dsm() ACPI / extlog: Switch to use new generic UUID API ACPI / bus: Switch to use new generic UUID API ACPI / APEI: Switch to use new generic UUID API acpi, nfit: Switch to use new generic UUID API MAINTAINERS: add uuid entry tmpfs: generate random sb->s_uuid scsi_debug: switch to uuid_t nvme: switch to uuid_t sysctl: switch to use uuid_t partitions/ldm: switch to use uuid_t overlayfs: use uuid_t instead of uuid_be fs: switch ->s_uuid to uuid_t ima/policy: switch to use uuid_t ...
2017-06-05scsi_debug: switch to uuid_tChristoph Hellwig1-5/+5
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-31scsi: scsi_debug: Avoid PI being disabled when TPGS is enabledMartin K. Petersen1-1/+1
It was not possible to enable both T10 PI and TPGS because they share the same byte in the INQUIRY response. Logically OR the TPGS value instead of using assignment. Reported-by: Ritika Srivastava <ritika.srivastava@oracle.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-31scsi: scsi_debug: Add OPTIMAL TRANSFER LENGTH GRANULARITY option.Lukas Herbolt1-1/+9
[mkp: whitespace fixes] Signed-off-by: Lukas Herbolt <lherbolt@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-1/+1
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-10-26scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloadedEwan D. Milne1-0/+1
map_storep was not being vfree()'d in the module_exit call. Cc: <stable@vger.kernel.org> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-15scsi: sd: Move DIF protection types to t10-pi.hChristoph Hellwig1-20/+19
These should go together with the rest of the T10 protection information defintions. [mkp: s/T10_DIF/T10_PI/] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-15scsi: scsi_debug: Use struct t10_pi_tuple instead of struct sd_dif_tupleChristoph Hellwig1-7/+8
And remove the declaration of the latter in sd.h as scsi_debug was the only user. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12scsi_debug: fix sleep in invalid contextDouglas Gilbert1-27/+66
In this post: http://www.spinics.net/lists/linux-scsi/msg97124.html the author shows some kernel infrastructure complaining about a sleep in an invalid context. Remove offending call to vmalloc(). Instead of using kzalloc() which reviewers didn't like, use a bucket system (64 bytes on the stack) and potentially multiple calls to sg_pcopy_from_buffer() to construct the 'data-in' buffer for the SCSI REPORT LUNS command. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: use locally assigned naaDouglas Gilbert1-17/+18
For reported SAS addresses replace fake IEEE registered NAAs (5) with locally assigned NAAs (3). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: uuid for lu nameDouglas Gilbert1-10/+51
Permit changing of a LU name from a (fake) IEEE registered NAA (5) to a locally assigned UUID. Using a UUID (RFC 4122) for a SCSI designation descriptor (e.g. a LU name) was added in spc5r08.pdf (a draft INCITS standard) on 25 January 2016. Add parameter uuid_ctl to use a separate UUID for each LU (storage device) name. Additional option for all LU names to have the same UUID (since their storage is shared). Previous action of using NAA identifier for LU name remains the default. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: vpd and mode page workDouglas Gilbert1-79/+108
Cleanup some mode and vpd pages. Stop reporting SBC (disk) pages when peripheral type is something else (e.g. tape). Update version descriptors. Expand LBPRZ flag handling. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10scsi_debug: add multiple queue supportDouglas Gilbert1-256/+446
Add submit_queue parameter (minimum and default: 1; maximum: nr_cpu_ids) that controls how many queues are built, each with their own lock and in_use bit vector. Add statistics parameter which is default off. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-03scsi_debug: rework resp_report_lunsDouglas Gilbert1-48/+87
Based on "[PATH V2] scsi_debug: rework resp_report_luns" patch sent by Tomas Winkler on Thursday, 26 Feb 2015. His notes: 1. Remove duplicated boundary checks which simplify the fill-in loop 2. Use more of scsi generic API Replace fixed length response array a with heap allocation allowing up to 256 normal LUNs per target. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-03scsi_debug: use pdt constantsDouglas Gilbert1-41/+45
Use TYPE_* constants for SCSI peripheral device types instead of numbers. Further cleanups requested by checkpatch.pl. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: use likely hints on fast pathDouglas Gilbert1-114/+105
The most common commands in normal use are the READ and WRITE SCSI commands. Use likely and unlikely hints along the path taken by these commands. Rename check_readiness() to make_ua() and remove associated dead code. Rename devInfoReg() to find_build_dev_info(). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-29scsi_debug: re-order file scope declarationsDouglas Gilbert1-163/+151
Group most defines together first; followed by struct definitions and then table and variable definitions. Normalize all function headers. [mkp: Corrected hex value in WP/DPOFUA MODE SENSE comment] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.