| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.
For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.
Set the device state then call into libiscsi to wake up the error handler.
Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") we meant to add a check where before we call ->set_param() we
make sure the iscsi_cls_connection is bound. The problem is that between
versions 4 and 5 of the patch the deletion of the unchecked set_param()
call was dropped so we ended up with 2 calls. As a result we can still hit
a crash where we access the unbound connection on the first call.
This patch removes that first call.
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Li Feng <fengli@smartx.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.
Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.
Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We set the max_active iSCSI EH works to 1, so all work is going to execute
in order by default. However, userspace can now override this in sysfs. If
max_active > 1, we can end up with the block_work on CPU1 and
iscsi_unblock_session running the unblock_work on CPU2 and the session and
target/device state will end up out of sync with each other.
This adds a flush of the block_work in iscsi_unblock_session.
Link: https://lore.kernel.org/r/20210525181821.7617-17-michael.christie@oracle.com
Fixes: 1d726aa6ef57 ("scsi: iscsi: Optimize work queue flush use")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.
Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space") has the following regressions/bugs that this patch fixes:
1. It can return cmds to upper layers like dm-multipath where that can
retry them. After they are successful the fs/app can send new I/O to the
same sectors, but we've left the cmds running in FW or in the net layer.
We need to be calling ep_disconnect if userspace is not up.
This patch only fixes the issue for offload drivers. iscsi_tcp will be
fixed in separate commit because it doesn't have a ep_disconnect call.
2. The drivers that implement ep_disconnect expect that it's called before
conn_stop. Besides crashes, if the cleanup_task callout is called before
ep_disconnect it might free up driver/card resources for session1 then they
could be allocated for session2. But because the driver's ep_disconnect is
not called it has not cleaned up the firmware so the card is still using
the resources for the original cmd.
3. The stop_conn_work_fn can run after userspace has done its recovery and
we are happily using the session. We will then end up with various bugs
depending on what is going on at the time.
We may also run stop_conn_work_fn late after userspace has called stop_conn
and ep_disconnect and is now going to call start/bind conn. If
stop_conn_work_fn runs after bind but before start, we would leave the conn
in a unbound but sort of started state where IO might be allowed even
though the drivers have been set in a state where they no longer expect
I/O.
4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in
kernel stop_conn function is breaking userspace. We should have been doing
this for the caller.
Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Subsequent commits allow the kernel to do ep_disconnect. In that case we
will have to get a proper refcount on the ep so one thread does not delete
it from under another.
Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the system_unbound_wq for async session destruction. We don't need a
dedicated workqueue for async session destruction because:
1. perf does not seem to be an issue since we only allow 1 active work.
2. it does not have deps with other system works and we can run them in
parallel with each other.
Link: https://lore.kernel.org/r/20210525181821.7617-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the system is not up, we can just fail immediately since iscsid is not
going to ever answer our netlink events. We are already setting the
recovery_tmo to 0, but by passing stop_conn STOP_CONN_TERM we never will
block the session and start the recovery timer, because for that flag
userspace will do the unbind and destroy events which would remove the
devices and wake up and kill the eh.
Since the conn is dead and the system is going dowm this just has us use
STOP_CONN_RECOVER with recovery_tmo=0 so we fail immediately. However, if
the user has set the recovery_tmo=-1 we let the system hang like they
requested since they might have used that setting for specific reasons
(one known reason is for buggy cluster software).
Link: https://lore.kernel.org/r/20210525181821.7617-5-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new
I/O but every driver except cxgbi and iscsi_tcp can still get I/O from
__iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before
ep_disconnect. This could happen if we were terminating the session, and
the logout timed out before it was even sent to libiscsi.
Fix the issue by adding a helper which reverses the bind_conn call that
allows new I/O to be queued. Drivers implementing ep_disconnect can use this
to make sure new I/O is not queued to them when handling the disconnect.
Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI fixes from James Bottomley:
"Two fixes: the libsas fix is for a problem that occurs when trying to
change the cache type of an ATA device and the libiscsi one is a
regression fix from this merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Reset num_scatter if libata marks qc as NODATA
scsi: iscsi: Fix iSCSI cls conn state
|
|
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") I missed that libiscsi was now setting the iSCSI class state,
and that patch ended up resetting the state during conn stoppage and using
the wrong state value during ep_disconnect. This patch moves the setting of
the class state to the class module and then fixes the two issues above.
Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Cc: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI fix from James Bottomley:
"A single fix to iscsi for a rare race condition which can cause a
kernel panic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix race condition between login and sync thread
|
|
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
index 91074fd97f64..f4bf62b007a0 100644
|
|
Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be
verifying that the provided PDU header and data lengths fall within the
netlink message to prevent accessing beyond that in memory.
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As the iSCSI parameters are exported back through sysfs, it should be
enforcing that they never are more than PAGE_SIZE (which should be more
than enough) before accepting updates through netlink.
Change all iSCSI sysfs attributes to use sysfs_emit().
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Protect the iSCSI transport handle, available in sysfs, by requiring
CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting
reception of messages to ones sent with CAP_SYS_ADMIN. This disables
normal users from being able to end arbitrary iSCSI sessions.
Cc: stable@vger.kernel.org
Reported-by: Adam Nichols <adam@grimm-co.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The session lock in iscsi_session_chkready() is not needed because when we
transition from logged into to another state we will block and/or remove
the devices under the session, so no new I/O will be sent to the drivers
after the block/remove. I/O that races with the block/removal is cleaned up
by the drivers when it handles all outstanding I/O, so this just added an
extra lock in the main I/O path. This patch removes the lock like other
transport classes.
Link: https://lore.kernel.org/r/20210207044608.27585-10-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
kfree(conn) is called inside put_device(&conn->dev) which could lead to
use-after-free. In addition, device_unregister() should be used here rather
than put_deviceO().
Link: https://lore.kernel.org/r/20201120074852.31658-1-miaoqinglang@huawei.com
Fixes: f3c893e3dbb5 ("scsi: iscsi: Fail session and connection on transport registration failure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
|
|
If scsi_host_lookup() fails we will jump to put_host which may cause a
panic. Jump to exit_set_fnode instead.
Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Register sysfs for workqueue iscsi_destroy so that users can set CPU
affinity through "cpumask" for this workqueue to get better isolation in
cloud multi-tenant scenario.
This patch unfolded create_singlethread_workqueue(), added WQ_SYSFS and
drop __WQ_ORDERED_EXPLICIT since __WQ_ORDERED_EXPLICIT workqueue isn't
allowed to change "cpumask".
Link: https://lore.kernel.org/r/20200703051603.1473-1-bob.liu@oracle.com
Suggested-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Just delete the sess from the session list instead of adding it to some
list we never use.
Link: https://lore.kernel.org/r/1593632868-6808-4-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no need for one session to flush the entire iscsi_eh_timer_workq
when removing/unblocking a session. During removal we need to make sure our
works are not running anymore. And iscsi_unblock_session only needs to make
sure its work is done. The unblock work function will flush/cancel the
works it has conflicts with.
Link: https://lore.kernel.org/r/1593632868-6808-3-git-send-email-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If we are doing async removal of the session, we could be doing a
scsi_remove_target from the removal workqueue, and for the offload case we
could be doing a new session addition and scan to the same host. The
add/scan might then end up trying to use the target_id of the target we are
removing.
This patch just has a delay the freeing of the target_id until after the
scsi_remove_target has completed, so we know it's no longer in use.
Link: https://lore.kernel.org/r/1593632868-6808-2-git-send-email-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3ce419662dd4 ("scsi: iscsi: Register sysfs for iscsi workqueue")
enabled 'cpumask' support for iSCSI workqueues. However, it is unnecessary
to set max_active = 2 since 'cpumask' can still be modified when max_active
is 1.
This patch sets max_active to 1 so as to keep the same behaviour as before.
Link: https://lore.kernel.org/r/20200701030745.16897-1-bob.liu@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iSCSI suffers from a deadlock in case a management command submitted via
the netlink socket sleeps on an allocation while holding the rx_queue_mutex
if that allocation causes a memory reclaim that writebacks to a failed
iSCSI device. The recovery procedure can never make progress to recover
the failed disk or abort outstanding IO operations to complete the reclaim
(since rx_queue_mutex is locked), thus locking the system.
Nevertheless, just marking all allocations under rx_queue_mutex as GFP_NOIO
(or locking the userspace process with something like PF_MEMALLOC_NOIO) is
not enough, since the iSCSI command code relies on other subsystems that
try to grab locked mutexes, whose threads are GFP_IO, leading to the same
deadlock. One instance where this situation can be observed is in the
backtraces below, stitched from multiple bugs reports, involving the kobj
uevent sent when a session is created.
The root of the problem is not the fact that iSCSI does GFP_IO allocations,
that is acceptable. The actual problem is that rx_queue_mutex has a very
large granularity, covering every unrelated netlink command execution at
the same time as the error recovery path.
The proposed fix leverages the recently added mechanism to stop failed
connections from the kernel, by enabling it to execute even though a
management command from the netlink socket is being run (rx_queue_mutex is
held), provided that the command is known to be safe. It splits the
rx_queue_mutex in two mutexes, one protecting from concurrent command
execution from the netlink socket, and one protecting stop_conn from racing
with other connection management operations that might conflict with it.
It is not very pretty, but it is the simplest way to resolve the deadlock.
I considered making it a lock per connection, but some external mutex would
still be needed to deal with iscsi_if_destroy_conn.
The patch was tested by forcing a memory shrinker (unrelated, but used
bufio/dm-verity) to reclaim iSCSI pages every time
ISCSI_UEVENT_CREATE_SESSION happens, which is reasonable to simulate
reclaims that might happen with GFP_KERNEL on that path. Then, a faulty
hung target causes a connection to fail during intensive IO, at the same
time a new session is added by iscsid.
The following stacktraces are stiches from several bug reports, showing a
case where the deadlock can happen.
iSCSI-write
holding: rx_queue_mutex
waiting: uevent_sock_mutex
kobject_uevent_env+0x1bd/0x419
kobject_uevent+0xb/0xd
device_add+0x48a/0x678
scsi_add_host_with_dma+0xc5/0x22d
iscsi_host_add+0x53/0x55
iscsi_sw_tcp_session_create+0xa6/0x129
iscsi_if_rx+0x100/0x1247
netlink_unicast+0x213/0x4f0
netlink_sendmsg+0x230/0x3c0
iscsi_fail iscsi_conn_failure
waiting: rx_queue_mutex
schedule_preempt_disabled+0x325/0x734
__mutex_lock_slowpath+0x18b/0x230
mutex_lock+0x22/0x40
iscsi_conn_failure+0x42/0x149
worker_thread+0x24a/0xbc0
EventManager_
holding: uevent_sock_mutex
waiting: dm_bufio_client->lock
dm_bufio_lock+0xe/0x10
shrink+0x34/0xf7
shrink_slab+0x177/0x5d0
do_try_to_free_pages+0x129/0x470
try_to_free_mem_cgroup_pages+0x14f/0x210
memcg_kmem_newpage_charge+0xa6d/0x13b0
__alloc_pages_nodemask+0x4a3/0x1a70
fallback_alloc+0x1b2/0x36c
__kmalloc_node_track_caller+0xb9/0x10d0
__alloc_skb+0x83/0x2f0
kobject_uevent_env+0x26b/0x419
dm_kobject_uevent+0x70/0x79
dev_suspend+0x1a9/0x1e7
ctl_ioctl+0x3e9/0x411
dm_ctl_ioctl+0x13/0x17
do_vfs_ioctl+0xb3/0x460
SyS_ioctl+0x5e/0x90
MemcgReclaimerD"
holding: dm_bufio_client->lock
waiting: stuck io to finish (needs iscsi_fail thread to progress)
schedule at ffffffffbd603618
io_schedule at ffffffffbd603ba4
do_io_schedule at ffffffffbdaf0d94
__wait_on_bit at ffffffffbd6008a6
out_of_line_wait_on_bit at ffffffffbd600960
wait_on_bit.constprop.10 at ffffffffbdaf0f17
__make_buffer_clean at ffffffffbdaf18ba
__cleanup_old_buffer at ffffffffbdaf192f
shrink at ffffffffbdaf19fd
do_shrink_slab at ffffffffbd6ec000
shrink_slab at ffffffffbd6ec24a
do_try_to_free_pages at ffffffffbd6eda09
try_to_free_mem_cgroup_pages at ffffffffbd6ede7e
mem_cgroup_resize_limit at ffffffffbd7024c0
mem_cgroup_write at ffffffffbd703149
cgroup_file_write at ffffffffbd6d9c6e
sys_write at ffffffffbd6662ea
system_call_fastpath at ffffffffbdbc34a2
Link: https://lore.kernel.org/r/20200520022959.1912856-1-krisman@collabora.com
Reported-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch enables setting cpu affinity through "cpumask" for iscsi
workqueues (iscsi_q_xx and iscsi_eh), so as to get performance isolation.
The max number of active worker was changed form 1 to 2, because "cpumask"
of ordered workqueue isn't allowed to change.
Link: https://lore.kernel.org/r/20200505011908.15538-1-bob.liu@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If an iSCSI connection happens to fail while the daemon isn't running (due
to a crash or for another reason), the kernel failure report is not
received. When the daemon restarts, there is insufficient kernel state in
sysfs for it to know that this happened. open-iscsi tries to reopen every
connection, but on different initiators, we'd like to know which
connections have failed.
There is session->state, but that has a different lifetime than an iSCSI
connection, so it doesn't directly reflect the connection state.
[mkp: typos]
Link: https://lore.kernel.org/r/20200317233422.532961-1-krisman@collabora.com
Cc: Khazhismel Kumykov <khazhy@google.com>
Suggested-by: Junho Ryu <jayr@google.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iSCSI session destruction can be arbitrarily slow, since it might require
network operations and serialization inside the SCSI layer. This patch
adds a new user event to trigger the destruction work asynchronously,
releasing the rx_queue_mutex as soon as the operation is queued and before
it is performed. This change allows other operations to run in other
sessions in the meantime, removing one of the major iSCSI bottlenecks for
us.
To prevent the session from being used after the destruction request, we
remove it immediately from the sesslist. This simplifies the locking
required during the asynchronous removal.
Link: https://lore.kernel.org/r/20200227195945.761719-1-krisman@collabora.com
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Connection failure processing depends on a daemon being present to (at
least) stop the connection and start recovery. This is a problem on a
multipath scenario, where if the daemon failed for whatever reason, the
SCSI path is never marked as down, multipath won't perform the failover and
IO to the device will be forever waiting for that connection to come back.
This patch performs the connection failure entirely inside the kernel.
This way, the failover can happen and pending IO can continue even if the
daemon is dead. Once the daemon comes alive again, it can execute recovery
procedures if applicable.
Cc: Mike Christie <mchristi@redhat.com>
Cc: Lee Duncan <LDuncan@suse.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20200125061925.191601-1-krisman@collabora.com
Co-developed-by: Dave Clausen <dclausen@google.com>
Co-developed-by: Nick Black <nlb@google.com>
Co-developed-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Co-developed-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Tahsin Erdogan <tahsin@google.com>
Co-developed-by: Frank Mayhar <fmayhar@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bharath Ravi <rbharath@google.com>
Signed-off-by: Dave Clausen <dclausen@google.com>
Signed-off-by: Nick Black <nlb@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Anatol Pomazau <anatol@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the transport cannot be registered, the session/connection creation
needs to be failed early to let the initiator know. Otherwise, the system
will have an outstanding connection that cannot be used nor removed by
open-iscsi. The result is similar to the error below, triggered by
injecting a failure in the transport's registration path.
openiscsi reports success:
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l
Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260]
Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful.
But cannot remove the session afterwards, since the kernel is in an
inconsistent state.
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u
iscsiadm: No matching sessions found
Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A faulty userspace that calls destroy_session() before destroying the
connections can trigger the failure. This patch prevents the issue by
refusing to destroy the session if there are outstanding connections.
------------[ cut here ]------------
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__slab_free+0x181/0x350
[...]
[ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246
[ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800
[ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40
[ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26
[ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00
[ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000
[ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000
[ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0
[ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1209.695631] Call Trace:
[ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0
[ 1209.696712] iscsi_pool_free+0x26/0x40
[ 1209.697263] iscsi_session_teardown+0x2f/0xf0
[ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60
[ 1209.698831] iscsi_if_rx+0xd88/0x14e0
[ 1209.699370] netlink_unicast+0x16f/0x200
[ 1209.699932] netlink_sendmsg+0x21a/0x3e0
[ 1209.700446] sock_sendmsg+0x4f/0x60
[ 1209.700902] ___sys_sendmsg+0x2ae/0x320
[ 1209.701451] ? cp_new_stat+0x150/0x180
[ 1209.701922] __sys_sendmsg+0x59/0xa0
[ 1209.702357] do_syscall_64+0x52/0x160
[ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1209.703419] RIP: 0033:0x7f7946433914
[...]
[ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914
[ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005
[ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07
[ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038
[ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace a2d933ede7f730d8 ]---
Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com
Signed-off-by: Nick Black <nlb@google.com>
Co-developed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Salman Qazi <sqazi@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In iscsi_if_rx func, after receiving one request through
iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to
reply to the request in a do-while loop. If the iscsi_if_send_reply
function keeps returning -EAGAIN, a deadlock will occur.
For example, a client only send msg without calling recvmsg func, then
it will result in the watchdog soft lockup. The details are given as
follows:
sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI);
retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr);
while (1) {
state_msg = sendmsg(sock_fd, &msg, 0);
//Note: recvmsg(sock_fd, &msg, 0) is not processed here.
}
close(sock_fd);
watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat:
curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0
deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq:
TIMER: 992
SCHED: 8
Sample irqstat:
irq 2: delta 1003, curr: 3103802, arch_timer
CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40400005 (nZcv daif +PAN -UAO)
pc : __alloc_skb+0x104/0x1b0
lr : __alloc_skb+0x9c/0x1b0
sp : ffff000033603a30
x29: ffff000033603a30 x28: 00000000000002dd
x27: ffff800b34ced810 x26: ffff800ba7569f00
x25: 00000000ffffffff x24: 0000000000000000
x23: ffff800f7c43f600 x22: 0000000000480020
x21: ffff0000091d9000 x20: ffff800b34eff200
x19: ffff800ba7569f00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0001000101000100
x13: 0000000101010000 x12: 0101000001010100
x11: 0001010101010001 x10: 00000000000002dd
x9 : ffff000033603d58 x8 : ffff800b34eff400
x7 : ffff800ba7569200 x6 : ffff800b34eff400
x5 : 0000000000000000 x4 : 00000000ffffffff
x3 : 0000000000000000 x2 : 0000000000000001
x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace:
__alloc_skb+0x104/0x1b0
iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi]
netlink_unicast+0x1e0/0x258
netlink_sendmsg+0x310/0x378
sock_sendmsg+0x4c/0x70
sock_write_iter+0x90/0xf0
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.com
Signed-off-by: Bo Wu <wubo40@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases, the iscsi_remove_session() function is called while an
unbind_work operation is still running. This may cause a situation where
sysfs objects are removed in an incorrect order, triggering a kernel
warning.
[ 605.249442] ------------[ cut here ]------------
[ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0'
[ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80
[ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi
[ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1
[ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi]
[ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80
[ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55
[ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286
[ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818
[ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007
[ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838
[ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000
[ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000
[ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0
[ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 607.524236] Call Trace:
[ 607.530591] device_del+0x56/0x350
[ 607.624393] ? ata_tlink_match+0x30/0x30 [libata]
[ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0
[ 607.829911] scsi_target_reap_ref_release+0x39/0x50
[ 607.928572] scsi_remove_target+0x1a2/0x1d0
[ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi]
[ 608.117435] process_one_work+0x1a7/0x360
[ 608.132917] worker_thread+0x30/0x390
[ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0
[ 608.323989] kthread+0x112/0x130
[ 608.418318] ? kthread_bind+0x30/0x30
[ 608.513821] ret_from_fork+0x35/0x40
[ 608.613909] ---[ end trace 0b98c310c8a6138c ]---
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
|
|
This commit enhances iscsi initiator modules to capture iscsi debug
messages using linux kernel tracepoint facility:
https://www.kernel.org/doc/Documentation/trace/tracepoints.txt
The following tracepoint events have been created under the iscsi
tracepoint event group:
iscsi_dbg_conn - to capture connection debug messages (libiscsi module)
iscsi_dbg_session - to capture session debug messages (libiscsi module)
iscsi_dbg_eh - to capture error handling debug messages (libiscsi module)
iscsi_dbg_tcp - to capture iscsi tcp debug messages (libiscsi_tcp module)
iscsi_dbg_sw_tcp - to capture iscsi sw tcp debug messages (iscsi_tcp module)
iscsi_dbg_trans_session - to cpature iscsi transsport sess debug messages
(scsi_transport_iscsi module)
iscsi_dbg_trans_conn - to capture iscsi transport conn debug messages
(scsi_transport_iscsi module)
[mkp: typos]
Signed-off-by: Fred Herard <fred.herard@oracle.com>
Reviewed-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
All drivers do unregister + cleanup, provide a helper for that.
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This will ease in the conversion to blk-mq, where we can't set
a timeout handler after queue init.
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bsg holding a reference to the parent device may result in a crash if a
bsg file handle is closed after the parent device driver has unloaded.
Holding a reference is not really needed: the parent device must exist
between bsg_register_queue and bsg_unregister_queue. Before the device
goes away the caller does blk_cleanup_queue so that all in-flight
requests to the device are gone and all new requests cannot pass beyond
the queue. The queue itself is a refcounted object and it will stay
alive with a bsg file.
Based on analysis, previous patch and changelog from Anatoliy Glagolev.
Reported-by: Anatoliy Glagolev <glagolig@gmail.com>
Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of always multicasting responses, send a unicast netlink message
directed at the correct pid. This will be needed if we ever want to
support multiple userspace processes interacting with the kernel over
iSCSI netlink simultaneously. Limitations can currently be seen if you
attempt to run multiple iscsistart commands in parallel.
We've fixed up the userspace issues in iscsistart that prevented
multiple instances from running, so now attempts to speed up booting by
bringing up multiple iscsi sessions at once in the initramfs are just
running into misrouted responses that this fixes.
Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
|
|
Trivial fix to spelling mistakes in 'iscsi_get_host_stats'.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsi_session_teardown was the only user of this function. Function
currently is just short for iscsi_remove_session + iscsi_free_session.
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ChunYu found a kernel crash by syzkaller:
[ 651.617875] kasan: CONFIG_KASAN_INLINE enabled
[ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 651.618731] general protection fault: 0000 [#1] SMP KASAN
[ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32
[ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000
[ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590
[...]
[ 651.627260] Call Trace:
[ 651.629156] skb_release_all+0x4f/0x60
[ 651.629450] consume_skb+0x1a5/0x600
[ 651.630705] netlink_unicast+0x505/0x720
[ 651.632345] netlink_sendmsg+0xab2/0xe70
[ 651.633704] sock_sendmsg+0xcf/0x110
[ 651.633942] ___sys_sendmsg+0x833/0x980
[ 651.637117] __sys_sendmsg+0xf3/0x240
[ 651.638820] SyS_sendmsg+0x32/0x50
[ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2
It's caused by skb_shared_info at the end of sk_buff was overwritten by
ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx.
During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh),
ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a
new value to skb_shinfo(SKB)->nr_frags by ev->type.
This patch is to fix it by checking nlh->nlmsg_len properly there to
avoid over accessing sk_buff.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SAS code will need it. Also mark the name argument const to match
bsg_register_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make these const as they are only stored in the type field of a device
structure, which is const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Mike Christie
Baokun Li
Linus Torvalds
Gulam Mohamed
Chris Leech
Lee Duncan
Qinglang Miao
Jing Xiangfeng
Bob Liu
Gabriel Krisman Bertazi
Wu Bo
Frank Mayhar
Bharath Ravi
Nick Black
Thomas Gleixner
Maurizio Lombardi
Fred Herard
Jens Axboe
Christoph Hellwig
Arvind Yadav
Khazhismel Kumykov
Xin Long
Bhumika Goyal