aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-12moxart_ether: pass struct device to DMA API functionsChristoph Hellwig2-4/+8
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12pxa168_eth: pass struct device to DMA API functionsChristoph Hellwig1-4/+7
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Note that this driver seems to entirely lack dma_map_single error handling, but that is left for another time. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12lantiq_etop: pass struct device to DMA API functionsChristoph Hellwig1-2/+4
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Note this driver seems to lack dma_unmap_* calls entirely, but fixing that is left for another time. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12macb_main: pass struct device to DMA API functionsChristoph Hellwig1-4/+4
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12au1000_eth: pass struct device to DMA API functionsChristoph Hellwig1-3/+3
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net: caif: pass struct device to DMA API functionsChristoph Hellwig1-14/+16
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Also use the proper Kconfig symbol to check for DMA API availability. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12selftests: mlxsw: avoid double sourcing of lib.shJiri Pirko1-1/+0
Don't source lib.sh 2 times and make the script work with ifnames passed on the command line. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12mlxsw: spectrum_flower: Fix VLAN modify action supportIdo Schimmel1-2/+1
The driver does not support VLAN push and pop, but only VLAN modify. Fixes: 738678817573 ("drivers: net: use flow action infrastructure") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12mlxsw: spectrum_router: Drop unnecessary WARN_ON_ONCE()Ido Schimmel1-1/+1
In case the register access failed an error would be logged anyway, so we can drop the warning. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12mlxsw: spectrum: Set LAG port collector only when activeNir Dotan1-17/+45
The LAG port collecting (receive) function was mistakenly set when the port was registered as a LAG member, while it should be set only when the port collection state is set to true. Set LAG port to collecting when it is set to distributing, as described in the IEEE link aggregation standard coupled control mux machine state diagram. Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12MAINTAINERS: add Karsten as SMC maintainerUrsula Braun1-0/+1
Add Karsten as additional maintainer for Shared Memory Communications (SMC) Sockets. Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: check port_idx of ib eventKarsten Graul1-8/+16
For robustness protect of higher port numbers than expected to avoid setting bits behind our port_event_mask. In case of an DEVICE_FATAL event all ports must be checked. The IB_EVENT_GID_CHANGE event is provided in the global event handler, so handle it there. And handle a QP_FATAL event instead of an DEVICE_FATAL event in the qp handler. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: check connections in smc_lgr_free_workKarsten Graul1-4/+2
Remove the shortcut that smc_lgr_free() would skip the check for existing connections when the link group is not in the link group list. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: reduce amount of status updates to peerKarsten Graul1-14/+8
In smc_cdc_msg_recv_action() the received cdc message is evaluated. To reduce the number of messaged triggered by this evaluation the logic is streamlined. For the write_blocked condition we do not need to send a response immediately. The remaining conditions can be put together into one if clause. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: no delay for free tx buffer waitKarsten Graul1-1/+1
When no free transfer buffers are available then a work to call smc_tx_work() is scheduled. Set the schedule delay to zero, because for the out-of-buffers condition the work can start immediately and will block in the called function smc_wr_tx_get_free_slot(), waiting for free buffers. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: move wake up of close waiterKarsten Graul2-2/+7
Move the call to smc_close_wake_tx_prepared() (which wakes up a possibly waiting close processing that might wait for 'all data sent') to smc_tx_sndbuf_nonempty() (which is the main function to send data). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12net/smc: reset cursor update required flagKarsten Graul2-4/+4
When an updated rx_cursor_confirmed field was sent to the peer then reset the cons_curs_upd_req flag. And remove the duplicate reset and cursor update in smc_tx_consumer_update(). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12nfp: flower: remove double new lineJakub Kicinski1-1/+0
Recent cls_flower offload rewrite added a double new line. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11flow_offload: Fix flow action infrastructureEli Britstein1-1/+1
Implementation of macro "flow_action_for_each" introduced in commit e3ab786b42535 ("flow_offload: add flow action infrastructure") and used in commit 738678817573c ("drivers: net: use flow action infrastructure") iterated the first item twice and did not reach the last one. Fix it. Fixes: e3ab786b42535 ("flow_offload: add flow action infrastructure") Fixes: 738678817573c ("drivers: net: use flow action infrastructure") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11Documentation: fix some freescale dpio-driver.rst warningsRandy Dunlap1-7/+7
Fix markup warnings for one list by using correct list syntax. Fix markup warnings for another list by using blank lines before the list. Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst:30: WARNING: Unexpected indentation. Documentation/networking/device_drivers/freescale/dpaa2/dpio-driver.rst:143: WARNING: Unexpected indentation. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com> Cc: netdev@vger.kernel.org Cc: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11nfp: devlink: include vendor/product info in serial numberJakub Kicinski1-3/+18
The manufacturing team requests we include vendor and product in the serial number field, as the serial number itself is not unique across manufacturing facilities and products. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11nfp: devlink: use the generic manufacture identifier instead of vendorJakub Kicinski1-1/+1
Vendor may sound ambiguous, let's rename the fab string to "board.manufacture" (which was just added as a generic identifier). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11devlink: add a generic board.manufacture version nameJakub Kicinski2-0/+7
At Jiri's suggestion add a generic "board.manufacture" version identifier. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11devlink: don't allocate attrs on the stackJakub Kicinski1-4/+10
Number of devlink attributes has grown over 128, causing the following warning: ../net/core/devlink.c: In function ‘devlink_nl_cmd_region_read_dumpit’: ../net/core/devlink.c:3740:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] } ^ Since the number of attributes is only going to grow allocate the array dynamically. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11devlink: fix condition for compat device infoJakub Kicinski1-1/+1
We need the port to be both ethernet and have the rigth netdev, not one or the other. Fixes: ddb6e99e2db1 ("ethtool: add compat for devlink info") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11devlink: Add WARN_ON to catch errors of not cleaning devlink objectsParav Pandit1-0/+8
Add WARN_ON to make sure that all sub objects of a devlink device are cleanedup before freeing the devlink device. This helps to catch any driver bugs. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11net: dsa: microchip: add switch offload forwarding supportTristram Ha2-3/+6
The flag offload_fwd_mark is set as the switch can forward frames by itself. This can be considered a fix to a problem introduced in commit c2e866911e254067 where the port membership are not set in sync. The flag offload_fwd_mark just needs to be set in tag_ksz.c to prevent the software bridge from forwarding duplicate multicast frames. Fixes: c2e866911e254067 ("microchip: break KSZ9477 DSA driver into two files") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: use phy_modify_changed in genphy_config_advertHeiner Kallweit1-28/+15
Use phy_modify_changed() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: marvell10g: fix usage of new MMD modifying helpersHeiner Kallweit1-7/+6
When replacing mv3310_modify() with phy_modify_mmd() we missed that they behave differently, mv3310_modify() returns 1 on a changed register value whilst phy_modify_mmd() returns 0. Fix this by replacing phy_modify_mmd() with phy_modify_mmd_changed() where needed. Fixes: b52c018ddccf ("net: phy: make use of new MMD accessors") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: add register modifying helpers returning 1 on changeHeiner Kallweit2-11/+128
When modifying registers there are scenarios where we need to know whether the register content actually changed. This patch adds new helpers to not break users of the current ones, phy_modify() etc. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: Change TCA_ACT_* to TCA_ID_* to match that of TCA_ID_POLICEEli Cohen27-30/+30
Modify the kernel users of the TCA_ACT_* macros to use TCA_ID_*. For example, use TCA_ID_GACT instead of TCA_ACT_GACT. This will align with TCA_ID_POLICE and also differentiates these identifier, used in struct tc_action_ops type field, from other macros starting with TCA_ACT_. To make things clearer, we name the enum defining the TCA_ID_* identifiers and also change the "type" field of struct tc_action to id. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: Move all TC actions identifiers to one placeEli Cohen17-33/+40
Move all the TC identifiers to one place, to the same enum that defines the identifier of police action. This makes it easier choose numbers for new actions since they are now defined in one place. We preserve the original values for binary compatibility. New IDs should be added inside the enum. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: aquantia: add support for AQCS109Nikita Yushchenko1-0/+12
Add support for the AQCS109. From software point of view, it should be almost equivalent to AQR107. v2: - make Nikita the author - document what I changed Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: use PHY_ID_MATCH_MODEL mascro] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: dsa: mv88e6xxx: SERDES support 2500BaseT via external PHYAndrew Lunn1-1/+3
By using an external PHY, ports 9 and 10 can support 2500BaseT. So set this link mode in the mask when validating. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09add snmp counter documentyupeng1-3/+181
add document for tcp retransmission, tcp fast open, syn cookies, challenge ack, prune and several general counters Signed-off-by: yupeng <yupeng0921@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: marvell: mvpp2: clear flow control modes in 10G modeRussell King1-0/+5
When mvpp2 configures the flow control modes in mvpp2_xlg_config() for 10G mode, it only ever set the flow control enable bits. There is no mechanism to clear these bits, which means that userspace is unable to use standard APIs to disable flow control (the only way is to poke the register directly.) Fix the missing bit clearance to allow flow control to be disabled. This means that, by default, as there is no negotiation in 10G modes with mvpp2, flow control is now disabled rather than being rx-only. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: Add support for asking the PHY its abilitiesAndrew Lunn2-16/+21
Add support for runtime determination of what the PHY supports, by adding a new function to the phy driver. The get_features call should set the phydev->supported member with the features the PHY supports. It is only called if phydrv->features is NULL. This requires minor changes to pause. The PHY driver should not set pause abilities, except for when it has odd cause capabilities, e.g. pause cannot be disabled. With this change, phydev->supported already contains the drivers abilities, including pause. So rather than considering phydrv->features, look at the phydev->supported, and enable pause if neither of the pause bits are already set. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: fixed small checkpatch complaint in one comment] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: probe the PHY before determining the supported featuresAndrew Lunn1-11/+13
We will soon support asking the PHY at runtime to determine what features it supports, rather than forcing it to be compile time. But we should probe the PHY first. So probe the phy driver earlier. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net: phy: remove unneeded masking of PHY register read resultsHeiner Kallweit1-6/+6
PHY registers are only 16 bits wide, therefore, if the read was successful, there's no need to mask out the higher 16 bits. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09net/tls: Disable async decrytion for tls1.3Vakul Garg1-2/+6
Function tls_sw_recvmsg() dequeues multiple records from stream parser and decrypts them. In case the decryption is done by async accelerator, the records may get submitted for decryption while the previous ones may not have been decryted yet. For tls1.3, the record type is known only after decryption. Therefore, for tls1.3, tls_sw_recvmsg() may submit records for decryption even if it gets 'handshake' records after 'data' records. These intermediate 'handshake' records may do a key updation. By the time new keys are given to ktls by userspace, it is possible that ktls has already submitted some records i(which are encrypted with new keys) for decryption using old keys. This would lead to decrypt failure. Therefore, async decryption of records should be disabled for tls1.3. Fixes: 130b392c6cd6b ("net: tls: Add tls 1.3 support") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: phy: disregard "Clause 22 registers present" bit in get_phy_c45_devs_in_pkgHeiner Kallweit2-0/+4
Bit 0 in register 1.5 doesn't represent a device but is a flag that Clause 22 registers are present. Therefore disregard this bit when populating the device list. If code needs this information it should read register 1.5 directly instead of accessing the device list. Because this bit doesn't represent a device don't define a MDIO_MMD_XYZ constant, just define a MDIO_DEVS_XYZ constant for the flag in the device list bitmap. v2: - make masking of bit 0 more explicit - improve commit message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: marvell: mvpp2: fix AN restartRussell King1-10/+5
phylink already limits which interface modes are able to call the MACs AN restart function, but in any case, the commentry seems incorrect: the AN restart bit does not automatically clear when set. This has been found via manual setting using devmem2, and we can observe that the AN does indeed restart and complete, yet the AN restart bit remains set. Explicitly clear the AN restart bit. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: marvell: mvpp2: read correct pause bitsRussell King1-2/+2
When reading the pause bits in mac_link_state, mvpp2 was reporting the state of the "active pause" bits, which are set when the MAC is in pause mode. This is not what phylink wants - we want the negotiated pause state. Fix the definition so we read the correct bits. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: marvell: mvpp2: only reprogram what is necessary on mac_configRussell King1-23/+35
mac_config() can be called at any point, and the expected behaviour from MAC drivers is to only reprogram when necessary - and certainly avoid taking the link down on every call. Unfortunately, mvpp2 does exactly that - it takes the link down, and reprograms everything, and then releases the forced-link down. This is bad, it can cause the link to bounce: - SFP detects signal, disables LOS indication. - SFP code calls into phylink, calling phylink_sfp_link_up() which triggers a resolve. - phylink_resolve() calls phylink_get_mac_state() and finds the MAC reporting link up. - phylink wants to configure the pause mode on the MAC, so calls phylink_mac_config() - mvpp2 takes the link down temporarily, generating a MAC link down event followed by another MAC link event. - phylink calls mac_link_up() and then processes the MAC link down event. - phylink_resolve() gets called again, registers the link down, and calls mach_link_down() before re-running itself. - phylink_resolve() starts again at step 3 above. This sequence repeats. GMAC versions prior to mvpp2 do not require the link to be taken down except when certain link properties (eg, switching between SGMII and 1000base-X mode, or enabling/disabling in-band negotiation) are changed. Implement this for mvpp2. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: marvell: mvpp2: fix stuck in-band SGMII negotiationRussell King1-6/+11
It appears that the mvpp22 can get stuck with SGMII negotiation. The symptoms are that in-band negotiation never completes and the partner (eg, PHY) never reports SGMII link up, or if it supports negotiation bypass, goes into negotiation bypass mode (which will happen when the PHY sees that the MAC is alive but gets no response.) Triggering the PHY end of the link to re-negotiate results in the bypass bit clearing on the PHY, and then re-setting - indicating that the problem is at the mvpp22 GMAC end. Asserting the GMAC reset and de-asserting it resolves the issue. Arrange to assert the GMAC reset at probe time, and deassert it only after we have configured the GMAC for the appropriate mode. This resolves the issue. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: marvell: mvpp2: phylink compliance updatesRussell King1-36/+61
Sven Auhagen reported issues with negotiation on a couple of his platforms using a mixture of SFP and PHYs in various different modes. Debugging to root cause proved difficult, but essentially the problem comes down to the mvpp2 phylink implementation being slightly at odds with what is expected. phylink operates in three modes: phy, fixed-link, and in-band mode. In the first two modes, the expected behaviour from a MAC driver is that phylink resolves the operating mode and passes the mode to the MAC driver for it to program, including when the link should be brought up or taken down. This is basically the same as the libphy approach. This does not negate the requirement to advertise a correct control word for interface modes that have control words where that can be reasonably controlled. The second mode is in-band mode, where the MAC is expected to use the in-band control word to determine the operating mode. The mvneta driver implements the correct pattern required to support this: configure the port interface type separately from the in-band mode(s). This is now specified in the phylink documentation patches. mvpp2 was programming in-band mode for SGMII and the 802.3z modes no what, and avoided forcing the link up in fixed/phy modes. This caused a problem with some boards where the PHY is by default programmed to enter AN bypass mode, the PHY would report that the link was up, but the mvpp2 never completed the exchange of control word. Another issue that mvpp2 has is it sets SGMII AN format control word for both SGMII and 802.3z modes. The format of the control word is defined by MVPP2_GMAC_INBAND_AN_MASK, which should be set for SGMII and clear for 802.3z. Available Marvell documentation for earlier GMAC implementations does not make this clear, but this has been ascertained via extensive testing on earlier GMAC implementations, and then confirmed with a Macchiatobin Single Shot connected to a Clearfog: when MVPP2_GMAC_INBAND_AN_MASK is set, the clearfog does not receive the advertised pause mode settings. Lastly, there is no flow control in the in-band control word in Cisco SGMII, setting the flow control autonegotiation bit even with a PHY that has the Marvell extension to send this information does not result in the flow control being enabled at the MAC. We need to do this manually using the information provided via phylink. Re-code mvpp2's mac_config() and mac_link_up() to follow this pattern. This allows Sven Auhagen's board and Macchiatobin to reliably bring the link up with the 88e1512 PHY with phylink operating in PHY mode with COMPHY built as a module but the rest of the networking built-in, and u-boot having brought up the interface. in-band mode requires an additional patch to resolve another problem. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08ethtool: Remove unnecessary null check in ethtool_rx_flow_rule_createNathan Chancellor1-11/+9
net/core/ethtool.c:3023:19: warning: address of array 'ext_m_spec->h_dest' will always evaluate to 'true' [-Wpointer-bool-conversion] if (ext_m_spec->h_dest) { ~~ ~~~~~~~~~~~~^~~~~~ h_dest is an array, it can't be null so remove this check. Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Link: https://github.com/ClangBuiltLinux/linux/issues/353 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08ixgbe: Use struct_size() helperGustavo A. R. Silva1-5/+5
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08igc: Use struct_size() helperGustavo A. R. Silva1-5/+4
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08igb: use struct_size() helperGustavo A. R. Silva1-3/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = alloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.