aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-17scsi: fnic: replace gross legacy tag hack with blk-mq hackJens Axboe1-49/+12
Would be nice to fix up the SCSI midlayer instead, but this will do for now. Cc: Christoph Hellwig <hch@lst.de> Cc: Satish Kharat <satishkh@cisco.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: mesh: switch to generic DMA APIChristoph Hellwig1-4/+4
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: ips: switch to generic DMA APIChristoph Hellwig1-39/+41
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: smartpqi: fully convert to the generic DMA APIChristoph Hellwig2-64/+47
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: vmw_pscsi: switch to generic DMA APIChristoph Hellwig1-39/+38
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: snic: switch to generic DMA APIChristoph Hellwig5-58/+38
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: qla4xxx: fully convert to the generic DMA APIChristoph Hellwig1-17/+8
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: qla2xxx: fully convert to the generic DMA APIChristoph Hellwig2-5/+5
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: qla1280: switch to generic DMA APIChristoph Hellwig1-13/+13
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: qedi: fully convert to the generic DMA APIChristoph Hellwig1-4/+4
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: qedf: fully convert to the generic DMA APIChristoph Hellwig1-4/+4
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: pm8001: switch to generic DMA APIChristoph Hellwig4-49/+31
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: nsp32: switch to generic DMA APIChristoph Hellwig1-8/+10
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: mvsas: fully convert to the generic DMA APIChristoph Hellwig2-24/+9
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: mvumi: switch to generic DMA APIChristoph Hellwig1-53/+36
Switch from the legacy PCI DMA API to the generic DMA API. Also reuse an existing helper (after fixing the error return) to set the DMA mask instead of having three copies of the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: mpt3sas: switch to generic DMA APIChristoph Hellwig3-58/+61
Switch from the legacy PCI DMA API to the generic DMA API. Also simplify setting the DMA mask a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: megaraid_sas: switch to generic DMA APIChristoph Hellwig2-83/+83
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: megaraid_mbox: switch to generic DMA APIChristoph Hellwig1-26/+25
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: hpsa: switch to generic DMA APIChristoph Hellwig1-67/+69
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: fnic: switch to generic DMA APIChristoph Hellwig4-75/+49
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: csiostor: switch to generic DMA APIChristoph Hellwig4-22/+20
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: be2iscsi: switch to generic DMA APIChristoph Hellwig4-64/+58
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: atp870u: switch to generic DMA APIChristoph Hellwig1-3/+3
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: a100u2w: switch to generic DMA APIChristoph Hellwig1-7/+13
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: BusLogic: switch to generic DMA APIChristoph Hellwig1-17/+19
Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: 3w-sas: fully convert to the generic DMA APIChristoph Hellwig1-21/+17
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: 3w-xxx: fully convert to the generic DMA APIChristoph Hellwig2-7/+14
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: 3w-9xxx: fully convert to the generic DMA APIChristoph Hellwig1-26/+24
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: aic94xx: fully convert to the generic DMA APIChristoph Hellwig2-30/+25
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: esp_scsi: Optimize PIO loopsFinn Thain1-6/+6
Avoid function calls in the inner PIO loops. On a Centris 660av this improves throughput for sequential read transfers by about 40% and sequential write by about 10%. Unfortunately it is not possible to have methods like .esp_write8 placed inline so this is always going to be slow, even with LTO. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: esp_scsi: De-duplicate PIO routinesFinn Thain5-365/+179
As a temporary measure, the code to implement PIO transfers was duplicated in zorro_esp and mac_esp. Now that it has stabilized move the common code into the core driver but don't build it unless needed. This replaces the inline assembler with more portable writesb() calls. Optimizing the m68k writesb() implementation is a separate patch. [mkp: applied by hand] Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMDFinn Thain2-36/+24
The concept of a 'slow command' as it appears in esp_scsi is confusing because it could refer to an ESP command or a SCSI command. It turns out that it refers to a particular ESP select command which the driver also tracks as 'ESP_SELECT_MSGOUT'. For readability, it is better to use the terminology from the datasheets. The global ESP_FLAG_DOING_SLOWCMD flag is redundant anyway, as it can be inferred from esp->select_state. Remove the ESP_FLAG_DOING_SLOWCMD cruft and just use a boolean local variable. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: esp_scsi: Grant disconnect privilege for untagged commandsFinn Thain1-10/+1
A SCSI device is not granted disconnect privilege by an esp_scsi host unless that device has its simple_tags flag set. However, a device may support disconnect/reselect and not support command queueing. Allow such devices to disconnect and thereby improve bus utilization. Drop the redundant 'lp' check. The mid-layer invokes .slave_alloc and .slave_destroy in such a way that we may rely on scmd->device->hostdata for as long as scmd belongs to the low-level driver. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: esp_scsi: Track residual for PIO transfersFinn Thain3-0/+5
If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: zorro_esp: Limit DMA transfers to 65535 bytesFinn Thain1-7/+1
The core driver, esp_scsi, does not use the ESP_CONFIG2_FENAB bit, so the chip's Transfer Counter register is only 16 bits wide (not 24). A larger transfer cannot work and will theoretically result in a failed command and a "DMA length is zero" error. Fixes: 3109e5ae0311 ("scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: dc395x: use generic DMA APIChristoph Hellwig1-22/+15
Convert the driver from the legacy pci_* DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: dc395x: fix DMA API usage in sg_update_listChristoph Hellwig1-0/+5
We need to transfer device ownership to the CPU before we can manipulate the mapped data. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: dc395x: fix dma API usage in srb_doneChristoph Hellwig1-5/+2
We can't just transfer ownership to the CPU and then unmap, as this will break with swiotlb. Instead unmap the command and sense buffer a little earlier in the I/O completion handler and get rid of the pci_dma_sync_sg_for_cpu call entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: dc395x: simplify list handlingChristoph Hellwig1-126/+26
Remove the list wrappers, including the pointless list iteration before deletion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: myrs: Add Mylex RAID controller (SCSI interface)Hannes Reinecke4-0/+4417
This patch adds support for the Mylex DAC960 RAID controller, supporting the newer, SCSI-based interface. The driver is a re-implementation of the original DAC960 driver. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: myrb: Add Mylex RAID controller (block interface)Hannes Reinecke4-0/+4630
This patch adds support for the Mylex DAC960 RAID controller, supporting the older, block-based interface only. The driver is a re-implementation of the original DAC960 driver. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: advansys: remove unused variable 'srb_tag' in adv_isr_callbackYueHaibing1-2/+0
drivers/scsi/advansys.c: In function 'adv_isr_callback': drivers/scsi/advansys.c:5952:6: warning: variable 'srb_tag' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 9c17c62aedb0 ("advansys: use shared host tag map for command lookup") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: core: Remove scsi_block_when_processing_errors: messageLaurence Oberman1-3/+0
This message floods the log when enabling mask 0x7 for /proc/sys/dev/scsi/logging_level: xxxxxxxx kernel: scsi_block_when_processing_errors: rtn: 1 It's not needed and makes tracing just scsi_eh* messages way too verbose so get rid of it. [mkp: mangled patch, applied by hand] Signed-off-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: ibmvscsi_tgt: Remove target_wait_for_sess_cmd()Bryant G. Ly1-1/+0
There is currently a bug with the driver where there is never a call to target_sess_cmd_list_set_waiting(), it only called target_wait_for_sess_cmd(), which basically means that the sess_wait_list would always be empty. Thus, list_empty(&sess->sess_wait_list) = true, (eg: no se_cmd I/O is quiesced, because no se_cmd in sess_wait_list), since commit 712db3eb2c35 ("scsi: ibmvscsis: Properly deregister target sessions") in 4.9.y code. ibmvscsi_tgt does not remove the I_T Nexus when a VM is active so we can fix this issue by removing the call to target_wait_for_sess_cmd() altogether. Signed-off-by: Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: ufs: Schedule clk gating work on correct queueEvan Green1-2/+3
With commit 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue"), clock gating work was moved to a separate work queue with WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim context. Unfortunately, clk_gating.gate_work was left queued via schedule_delayed_work, which is a system workqueue that does not have WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel gate_work, the following warning appears: [ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work [ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118 [ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1 [ 14.212437] Hardware name: Google Cheza (rev1) (DT) [ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work [ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000 [ 14.229195] PC is at check_flush_dependency+0x110/0x118 [ 14.234569] LR is at check_flush_dependency+0x110/0x118 [ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9 [ 14.333050] Call trace: [ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118 [ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc [ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94 [ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8 [ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30 [ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0 [ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690 [ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338 [ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130 [ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18 The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM work queue as the ungate_work. Fixes: 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue") Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: lpfc: Remove set but not used variables 'tgtp'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data': drivers/scsi/lpfc/lpfc_debugfs.c:553:29: warning: variable 'tgtp' set but not used [-Wunused-but-set-variable] It never used since 2b65e18202fd ("scsi: lpfc: NVME Target: Add debugfs support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: aic94xx: mark expected switch fall-throughsGustavo A. R. Silva1-0/+5
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114988 ("Missing break in switch") Addresses-Coverity-ID: 114989 ("Missing break in switch") Addresses-Coverity-ID: 114990 ("Missing break in switch") Addresses-Coverity-ID: 114991 ("Missing break in switch") Addresses-Coverity-ID: 114992 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_paramNathan Chancellor1-1/+2
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from enumeration type 'enum iscsi_host_param' to different enumeration type 'enum iscsi_param' [-Wenum-conversion] &addr, param, buf); ^~~~~ 1 warning generated. iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine so add an explicit cast to iscsi_param to make it clear to Clang that this is expected behavior. Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: lpfc: Remove set but not used variable 'psli'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/lpfc/lpfc_hbadisc.c: In function 'lpfc_free_tx': drivers/scsi/lpfc/lpfc_hbadisc.c:5431:19: warning: variable 'psli' set but not used [-Wunused-but-set-variable] Since commit 895427bd012c ("scsi: lpfc: NVME Initiator: Base modifications") 'psli' is not used any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_eventNathan Chancellor2-2/+2
Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion from enumeration type 'enum bfa_lport_aen_event' to different enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion] BFA_AEN_CAT_LPORT, event); ^~~~~ The root cause of these warnings is the bfad_im_post_vendor_event function, which expects a value from enum bfa_ioc_aen_event but there are multiple instances of values from enums bfa_port_aen_event, bfa_audit_aen_event, and bfa_lport_aen_event being used in this function. Given that this doesn't appear to be a problem since cat helps with differentiating the events, just change evt's type to int so that no conversion needs to happen and Clang won't warn. Update aen_type's type in bfa_aen_entry_s as members that hold enumerated types should be int. Link: https://github.com/ClangBuiltLinux/linux/issues/147 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.