aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva97-290/+287
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-20scsi: libcxgbi: Use kvzalloc instead of opencoded kzalloc/vzallocDenis Efremov2-20/+4
Remove cxgbi_alloc_big_mem(), cxgbi_free_big_mem() functions and use kvzalloc/kvfree instead. __GFP_NOWARN added to kvzalloc() call because we already print a warning in case of allocation fail. Link: https://lore.kernel.org/r/20200801133123.61834-1-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: dc395x: Use %*ph to print small bufferAndy Shevchenko1-8/+2
Use %*ph format to print small buffer as hex string. Link: https://lore.kernel.org/r/20200730153535.39691-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Remove superfluous memset()Li Heng1-1/+0
Fixes coccicheck warning: ./drivers/scsi/mpt3sas/mpt3sas_base.c:5247:16-34: WARNING: dma_alloc_coherent use in ioc -> request already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596079918-41115-4-git-send-email-liheng40@huawei.com Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qla2xxx: Remove superfluous memset()Li Heng1-2/+0
Fixes coccicheck warning: ./drivers/scsi/qla2xxx/qla_mbx.c:4928:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596079918-41115-3-git-send-email-liheng40@huawei.com Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: pmcraid: Remove superfluous memset()Li Heng1-1/+0
Fixes coccicheck warning: ./drivers/scsi/pmcraid.c:4709:3-21: WARNING: dma_alloc_coherent use in pinstance -> hrrq_start [ i ] already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596079918-41115-2-git-send-email-liheng40@huawei.com Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mvsas: Remove superfluous memset()Li Heng1-4/+0
Fixes coccicheck warning: ./drivers/scsi/mvsas/mv_init.c:244:11-29: WARNING: dma_alloc_coherent use in mvi -> tx already zeroes out memory, so memset is not needed ./drivers/scsi/mvsas/mv_init.c:250:15-33: WARNING: dma_alloc_coherent use in mvi -> rx_fis already zeroes out memory, so memset is not needed ./drivers/scsi/mvsas/mv_init.c:256:11-29: WARNING: dma_alloc_coherent use in mvi -> rx already zeroes out memory, so memset is not needed ./drivers/scsi/mvsas/mv_init.c:265:13-31: WARNING: dma_alloc_coherent use in mvi -> slot already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596078235-54002-1-git-send-email-liheng40@huawei.com Signed-off-by: Li Heng <liheng40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: ufs-mediatek: Modify the minimum RX/TX lane count to 2Andy Teng1-2/+2
MediaTek UFS host now supports 2 lanes. Modify the lane count to 2. This modification shall not impact old 1-lane host because PA_CONNECTEDRXDATALANES and PA_CONNECTEDTXDATALANES will limit the target lanes properly during power mode change. So we could relax the limitation in ufs_dev_params. Link: https://lore.kernel.org/r/20200819084340.7021-1-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: Remove an unpaired ufshcd_scsi_unblock_requests() in err_handler()Can Guo1-1/+0
Commit 5586dd8ea250 ("scsi: ufs: Fix a race condition between error handler and runtime PM ops") moves the ufshcd_scsi_block_requests() inside err_handler() but forgets to remove the ufshcd_scsi_unblock_requests() in the early return path. Correct the mistake. Link: https://lore.kernel.org/r/1597798958-24322-1-git-send-email-cang@codeaurora.org Fixes: 5586dd8ea250 ("scsi: ufs: Fix a race condition between error handler and runtime PM ops") Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Hongwu Su<hongwus@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: Change fDeviceInit busy waitKiwoong Kim1-12/+21
Currently, the UFS driver busy waits for fDeviceInit to be cleared. Provide an upper bound and sleep between attempts instead of busy waiting. Link: https://lore.kernel.org/r/1597053747-75171-1-git-send-email-kwmad.kim@samsung.com Tested-by: Kiwoong Kim <kwmad.kim@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: Remove several redundant goto statementsBean Huo1-20/+5
Link: https://lore.kernel.org/r/20200814095034.20709-3-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: Change ufshcd_comp_devman_upiu() to ufshcd_compose_devman_upiu()Bean Huo1-3/+4
ufshcd_comp_devman_upiu() was poorly named leading people to think it was a completion function. Rename it to ufshcd_compose_devman_upiu(). Link: https://lore.kernel.org/r/20200814095034.20709-2-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Fix race between ELS completion and flushing ELS requestSaurav Kashyap2-0/+16
Fix race between ELS completion and flushing ELS request. Link: https://lore.kernel.org/r/20200807110656.19965-8-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Don't process ELS completion if event is flushed or cleaned upSaurav Kashyap1-0/+9
Don't process ELS completion if event is flushed or cleaned up. Link: https://lore.kernel.org/r/20200807110656.19965-7-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Initiate cleanup for ELS commands as wellSaurav Kashyap1-0/+7
Initiate cleanup for ELS commands as well. Link: https://lore.kernel.org/r/20200807110656.19965-6-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Send cleanup even for RRQ on timeoutSaurav Kashyap1-1/+1
Send cleanup even for RRQ on timeout. Link: https://lore.kernel.org/r/20200807110656.19965-5-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Do not kill timeout work for original I/O on RRQ completionSaurav Kashyap1-4/+0
The timer is already cancelled when abort is completed, hence no need to cancel it again. Link: https://lore.kernel.org/r/20200807110656.19965-4-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Check the validity of rjt frame before processingSaurav Kashyap1-0/+5
This is reported by Klockwork. Link: https://lore.kernel.org/r/20200807110656.19965-3-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: qedf: Check for port type and role before processing an eventSaurav Kashyap1-0/+11
The rport lock gets initialized during offload. If a non-FCP or non-target rport got logout then this rport will be uninitialized. KASAN was complaining because of it. ========= [ 14.384434] the code is fine but needs lockdep annotation. [ 14.384482] turning off the locking correctness validator. ======== Link: https://lore.kernel.org/r/20200807110656.19965-2-jhasan@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs-qcom: Remove unused MSM bus scaling APIsSai Prakash Ranjan2-235/+1
MSM bus scaling has moved on to use interconnect framework and downstream bus scaling APIs like msm_bus_scale*() do not exist anymore in the kernel. Currently they are guarded by a config which also does not exist and hence there are no build failures reported. Remove these unused interfaces as they are currently no-ops and the scaling support that may be added in future will use interconnect API. Link: https://lore.kernel.org/r/20200804161033.15586-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Bump version to 1.2.16-010Don Brace1-3/+3
Link: https://lore.kernel.org/r/159622931040.30579.9167901134341507088.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Add RAID bypass counterKevin Barnett2-24/+54
Add a counter to assist in verifying when RAID bypass is being used. Link: https://lore.kernel.org/r/159622930468.30579.13153724465552773544.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Support device deletion via sysfsKevin Barnett1-49/+43
Support device deletion via sysfs. I.e: echo 1 > /sys/block/sd<X>/device/delete Link: https://lore.kernel.org/r/159622929885.30579.2727491506675011534.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Avoid crashing kernel for controller issuesKevin Barnett2-35/+68
Eliminate kernel panics when getting invalid responses from controller. Take controller offline instead of causing kernel panics. Link: https://lore.kernel.org/r/159622929306.30579.16523318707596752828.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Prasad Munirathnam <Prasad.Munirathnam@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Update logical volume size after expansionMahesh Rajashekhara2-5/+17
Have OS rescan after logical volume expansion to reflect new size. Link: https://lore.kernel.org/r/159622928727.30579.298277463169866711.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Add id support for SmartRAID 3152-8iMahesh Rajashekhara1-0/+4
VID_9005, DID_028F, SVID_9005 and SDID_080A. Link: https://lore.kernel.org/r/159622928143.30579.14769183842894725454.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: smartpqi: Identify physical devices without issuing INQUIRYKevin Barnett2-87/+87
Eliminate issuing INQUIRYs to problematic devices by using information provided by controller. Link: https://lore.kernel.org/r/159622927172.30579.3960527536810532094.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Update driver version to 35.100.00.00Suganath Prabu S1-2/+2
Updated driver version to 35.100.00.00 Link: https://lore.kernel.org/r/1596096229-3341-8-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Postprocessing of target and LUN resetSuganath Prabu S3-5/+139
If driver has not received the interrupt for the aborted SCSI command before processing the TM reply, driver polls all the reply descriptor pools looking for the reply for the aborted SCSI command before marking TM as FAILED. If it finds the reply, then it marks the TM as SUCCESS otherwise it marks it FAILED. scsih_tm_cmd_map_status() checks whether TM has aborted the timed out SCSI command or not. If TM has aborted the IO, then it returns SUCCESS else it returns FAILED. Link: https://lore.kernel.org/r/1596096229-3341-7-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Add functions to check if any cmd is outstanding on Target and LUNSuganath Prabu S3-19/+88
Add helper functions to check whether any SCSI command is outstanding on particular Target, LUN device. Also add function parameters 'channel', 'id' to function mpt3sas_scsih_issue_tm(). Link: https://lore.kernel.org/r/1596096229-3341-6-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Rename and export interrupt mask/unmask functionsSuganath Prabu S2-13/+13
Rename Function _base_unmask_interrupts() to mpt3sas_base_unmask_interrupts() and _base_mask_interrupts() to mpt3sas_base_mask_interrupts(). Also add function declarion to mpt3sas_base.h Link: https://lore.kernel.org/r/1596096229-3341-5-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Cancel the running work during host resetSuganath Prabu S2-5/+16
It is not recommended to issue back-to-back host reset without any delay. However, if someone issues back-to-back host reset then we observe that target devices get unregistered and re-register with SML. And if OS drive is behind the HBA when it gets unregistered, then file-system goes into read-only mode. Normally during host reset, driver marks accessible target devices as responding and triggers the event MPT3SAS_REMOVE_UNRESPONDING_DEVICES to remove any non-responding devices through FW worker thread. While processing this event, driver unregisters the non-responding devices and clears the responding flag for all the devices. Currently, during host reset, driver is cancelling only those Firmware event works which are pending in Firmware event workqueue. It is not cancelling work which is currently running. Change the driver to cancel all events. Link: https://lore.kernel.org/r/1596096229-3341-4-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Dump system registers for debuggingSuganath Prabu S1-0/+20
When controller fails to transition to READY state during driver probe, dump the system interface register set. This will give snapshot of the firmware status for debugging driver load issues. Link: https://lore.kernel.org/r/1596096229-3341-3-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: mpt3sas: Memset config_cmds.reply buffer with zerosSuganath Prabu S1-1/+1
Currently config_cmds.reply buffer is not memset to zero before posting config page request message. In some cases, for the current config request, the previous config reply is getting processed and we will observe PageType mismatch between request to reply buffer. It will be difficult to debug this type of issue and it confuses by thinking that HBA Firmware itself posted the wrong config reply. So it is better to memset the config_cmds.reply buffer with zeros before issuing the config request. Link: https://lore.kernel.org/r/1596096229-3341-2-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-20scsi: ufs: Properly release resources if a task is aborted successfullyCan Guo1-4/+1
In current UFS task abort hook, namely ufshcd_abort(), if one task is aborted successfully, clk_gating.active_reqs held by this task is not decreased, which makes clk_gating.active_reqs stay above zero forever, thus clock gating would never happen. Instead of releasing resources of one task "manually", use the existing func __ufshcd_transfer_req_compl(). This change also eliminates a possible race of scsi_dma_unmap() from the real completion in IRQ handler path. Link: https://lore.kernel.org/r/1596975355-39813-10-git-send-email-cang@codeaurora.org Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating") CC: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"Quinn Tran1-4/+0
FCP T10-PI and NVMe features are independent of each other. This patch allows both features to co-exist. This reverts commit 5da05a26b8305a625bc9d537671b981795b46dab. Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com Fixes: 5da05a26b830 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"Saurav Kashyap1-8/+0
FCoE adapter initialization failed for ISP8021 with the following patch applied. In addition, reproduction of the issue the patch originally tried to address has been unsuccessful. This reverts commit 3cb182b3fa8b7a61f05c671525494697cba39c6a. Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix null pointer access during disconnect from subsystemQuinn Tran1-0/+5
NVMEAsync command is being submitted to QLA while the same NVMe controller is in the middle of reset. The reset path has deleted the association and freed aen_op->fcp_req.private. Add a check for this private pointer before issuing the command. ... 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e [exception RIP: qla_nvme_post_cmd+394] RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206 RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161 RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220 RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002 R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0 R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc] 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc] 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core] 10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437 11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef 12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402 13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255 -- PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451" 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core] 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc] 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402 10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255 Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Check if FW supports MQ before enablingSaurav Kashyap1-0/+5
OS boot during Boot from SAN was stuck at dracut emergency shell after enabling NVMe driver parameter. For non-MQ support the driver was enabling MQ. Add a check to confirm if FW supports MQ. Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hbaArun Easi2-1/+10
qla_nvme_register_hba() puts out a warning when there are not enough queue pairs available for FC-NVME. Just fail the NVME registration rather than a WARNING + call Trace. Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytimeArun Easi1-0/+3
ql2xextended_error_logging can now be set to 1 to get the default mask value, as opposed to at module load time only. Link: https://lore.kernel.org/r/20200806111014.28434-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Reduce noisy debug messageQuinn Tran1-2/+2
Update debug level and message for ELS IOCB done. Link: https://lore.kernel.org/r/20200806111014.28434-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix login timeoutQuinn Tran2-4/+16
Multipath errors were seen during failback due to login timeout. The remote device sent LOGO, the local host tore down the session and did relogin. The RSCN arrived indicates remote device is going through failover after which the relogin is in a 20s timeout phase. At this point the driver is stuck in the relogin process. Add a fix to delete the session as part of abort/flush the login. Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Indicate correct supported speeds for Mezz cardQuinn Tran1-5/+12
Correct the supported speeds for 16G Mezz card. Link: https://lore.kernel.org/r/20200806111014.28434-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Flush I/O on zone disableQuinn Tran1-1/+0
Perform implicit logout to flush I/O on zone disable. Link: https://lore.kernel.org/r/20200806111014.28434-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Flush all sessions on zone disableQuinn Tran1-0/+12
On Zone Disable, certain switches would ignore all commands. This causes timeout for both switch scan command and abort of that command. On detection of this condition, all sessions will be shutdown. Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout valuesEnzo Matsumiya1-7/+7
Improves readability of qla_mbx.c. Link: https://lore.kernel.org/r/20200805200546.22497-1-ematsumiya@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: scsi_debug: Fix scp is NULL errorsDouglas Gilbert1-0/+2
John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The problem was tracked down to a missing critical section on a "short circuit" path. Namely, the time to process the current command so far has already exceeded the requested command duration (i.e. the number of nanoseconds in the ndelay parameter). The random=1 parameter setting was pivotal in finding this error. The failure scenario involved first taking that "short circuit" path (due to a very short command duration) and then taking the more likely hrtimer_start() path (due to a longer command duration). With random=1 each command's duration is taken from the uniformly distributed [0..ndelay) interval. The fio utility also helped by reliably generating the error scenario at about once per minute on a RPi 4 (64 bit OS). Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com Reported-by: John Garry <john.garry@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: No need to send Abort Task if the task in DB was clearedBean Huo1-7/+8
If the bit corresponding to a task in the Doorbell register has been cleared, no need to poll the status of the task on the device side and to send an Abort Task TM. Instead, let it directly goto cleanup. In addition, to keep original debug output, move the goto below the debug print. Link: https://lore.kernel.org/r/20200811141859.27399-3-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: Clean up completed request without interrupt notificationStanley Chu1-1/+2
If somehow no interrupt notification is raised for a completed request and its doorbell bit is cleared by host, UFS driver needs to cleanup its outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally in the following scenario: After ufshcd_abort() returns, this request will be requeued by SCSI layer with its outstanding bit set. Any future completed request will trigger ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At this time the "abnormal outstanding bit" will be detected and the "requeued request" will be chosen to execute request post-processing flow. This is wrong because this request is still "alive". Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com Reviewed-by: Can Guo <cang@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.