aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2020-04-17scsi: qedf: Get dev info after updating the paramsSaurav Kashyap1-0/+7
An update to pf params can change the devinfo. Get updated device information. [mkp: updated error message spotted by Sergei Shtylyov] Link: https://lore.kernel.org/r/20200416084314.18851-10-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probingChad Dupuis2-4/+32
The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Add schedule recovery handlerChad Dupuis2-0/+44
Implement recovery handler to be used by QED to signal the need for recovery to come out of an error condition like ramrod struck and firmware context reset. Link: https://lore.kernel.org/r/20200416084314.18851-8-skashyap@marvell.com Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Implement callback for bw_updateSaurav Kashyap1-0/+27
Add support for the common qed bw_update callback to qedf. This function is called whenever there is a reported change in the bandwidth and updates corresponding values in sysfs. Link: https://lore.kernel.org/r/20200416084314.18851-7-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Honor status qualifier in FCP_RSP per specJaved Hasan1-10/+34
Handle scope and qualifier on SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY [mkp: added braces to fix sparse complaint] Link: https://lore.kernel.org/r/20200416084314.18851-5-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Acquire rport_lock for resetting the delay_timestampJaved Hasan1-0/+4
Retry delay timestamp is updated in queuecommand as well as in qedf_scsi_completion routine. Protect it using lock. Link: https://lore.kernel.org/r/20200416084314.18851-4-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Increase the upper limit of retry delayJaved Hasan1-1/+1
Max time to hold the IO in case of SAM_STAT_TASK_SET_FULL or SAM_STAT_BUSY. Link: https://lore.kernel.org/r/20200416084314.18851-3-skashyap@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedf: Keep track of num of pending flogiSaurav Kashyap2-0/+25
If a port is brought down for an extended period of time, the fipvlan counter gets exhausted and the driver will fall back to default VLAN 1002 and call fcoe_ctlr_link_up to log in. However, the switch will discard the FLOGI attempt because the VLAN is now different. Keep track of the number of FLOGI attempts and if a threshold of QEDF_FLOGI_RETRY_CNT is exceeded, perform a context soft reset. Link: https://lore.kernel.org/r/20200416084314.18851-2-skashyap@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: mvsas: remove unused symbol 'mvs_th'Jason Yan1-2/+0
This symbol has no users so remove it. Link: https://lore.kernel.org/r/20200415085053.7633-1-yanaijie@huawei.com Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: mvsas: make mvst_host_attrs staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/mvsas/mv_init.c:28:25: warning: symbol 'mvst_host_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085044.7460-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: qedi: make qedi_ll2_buf_size staticJason Yan1-1/+1
Fix the following sparse warning: drivers/scsi/qedi/qedi_main.c:44:6: warning: symbol 'qedi_ll2_buf_size' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415085029.7170-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: ufs: full reinit upon resume if link was offAsutosh Das1-2/+6
During suspend, if the link is put to off, it would require a full initialization during resume. This patch resets and restores both the host and the card during initialization, otherwise host-only reset and restore would fail occasionally. Link: https://lore.kernel.org/r/1586844892-22720-1-git-send-email-cang@codeaurora.org Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Stanley Chu <stanley.chu@mediatek.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make vnic_wq_get_ctrl and vnic_wq_alloc_ring staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/fnic/vnic_wq.c:28:5: warning: symbol 'vnic_wq_get_ctrl' was not declared. Should it be static? drivers/scsi/fnic/vnic_wq.c:40:5: warning: symbol 'vnic_wq_alloc_ring' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make fnic_list and fnic_list_lock staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/fnic/fnic_main.c:52:1: warning: symbol 'fnic_list' was not declared. Should it be static? drivers/scsi/fnic/fnic_main.c:53:1: warning: symbol 'fnic_list_lock' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17scsi: fnic: make some symbols staticJason Yan1-6/+6
Fix the following sparse warning: drivers/scsi/fnic/vnic_dev.c:257:5: warning: symbol 'vnic_dev_cmd1' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:319:5: warning: symbol 'vnic_dev_cmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:414:5: warning: symbol 'vnic_dev_init_devcmd1' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:425:5: warning: symbol 'vnic_dev_init_devcmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:495:6: warning: symbol 'vnic_dev_deinit_devcmd2' was not declared. Should it be static? drivers/scsi/fnic/vnic_dev.c:506:5: warning: symbol 'vnic_dev_cmd_no_proxy' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200415093809.9365-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: libsas: Add missing annotation for sas_ata_qc_issue()Jules Irenge1-0/+1
Sparse reports a warning at sas_ata_qc_issue() warning: context imbalance in sas_ata_qc_issue() - unexpected unlock The root cause is the missing annotation at sas_ata_qc_issue() Add the missing __must_hold(ap->lock) annotation Link: https://lore.kernel.org/r/20200411001933.10072-7-jbi.octave@gmail.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: ipr: remove unneeded semicolonJason Yan1-1/+1
Fix the following coccicheck warning: drivers/scsi/ipr.c:1167:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200413082822.24356-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: qla1280: make qla1280_firmware_mutex and qla1280_fw_tbl staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/qla1280.c:529:1: warning: symbol 'qla1280_firmware_mutex' was not declared. Should it be static? drivers/scsi/qla1280.c:538:15: warning: symbol 'qla1280_fw_tbl' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200409084910.44336-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make two symbols static in megaraid_sas_base.cJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:84:5: warning: symbol 'rdpq_enable' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_base.c:92:14: warning: symbol 'scmd_timeout' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make some symbols static in megaraid_sas_fusion.cJason Yan1-3/+3
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:180:1: warning: symbol 'megasas_enable_intr_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:202:1: warning: symbol 'megasas_disable_intr_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:4233:6: warning: symbol 'megasas_refire_mgmt_cmd' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-4-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make some symbols static in megaraid_sas_fp.cJason Yan1-6/+6
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_fp.c:88:5: warning: symbol 'mega_div64_32' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:370:5: warning: symbol 'MR_GetSpanBlock' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:420:5: warning: symbol 'mr_spanset_get_span_block' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:645:4: warning: symbol 'get_arm' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:788:4: warning: symbol 'MR_GetPhyParams' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fp.c:1345:4: warning: symbol 'megasas_get_best_arm_pd' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: megaraid: make two symbols static in megaraid_mbox.cJason Yan1-3/+3
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_mbox.c:305:5: warning: symbol 'dev_attr_megaraid_mbox_app_hndl' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_mbox.c:315:5: warning: symbol 'dev_attr_megaraid_mbox_ld' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfad.c: make max_rport_logins staticJason Yan1-1/+1
Fix the following sparse warning: drivers/scsi/bfa/bfad.c:53:17: warning: symbol 'max_rport_logins' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-8-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfad_attr.c: make two funcitons staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/bfa/bfad_attr.c:441:1: warning: symbol 'bfad_im_issue_fc_host_lip' was not declared. Should it be static? drivers/scsi/bfa/bfad_attr.c:566:1: warning: symbol 'bfad_im_vport_set_symbolic_name' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-7-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_ioc_ct.c: make two funcitons staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/bfa/bfa_ioc_ct.c:368:1: warning: symbol 'bfa_ioc_ct2_lpu_read_stat' was not declared. Should it be static? drivers/scsi/bfa/bfa_ioc_ct.c:748:1: warning: symbol 'bfa_ioc_ct2_mac_reset' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-6-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_fcs_lport.c: make bfa_fcport_get_loop_attr() staticJason Yan1-1/+1
Fix the following sparse warning: drivers/scsi/bfa/bfa_fcs_lport.c:1287:1: warning: symbol 'bfa_fcport_get_loop_attr' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_fcpim.c: make two functions staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/bfa/bfa_fcpim.c:440:1: warning: symbol 'bfa_ioim_profile_comp' was not declared. Should it be static? drivers/scsi/bfa/bfa_fcpim.c:457:1: warning: symbol 'bfa_ioim_profile_start' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-4-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_core.c: make bfa_isr_rspq() staticJason Yan1-1/+1
Fix the following sparse warning: drivers/scsi/bfa/bfa_core.c:712:1: warning: symbol 'bfa_isr_rspq' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-3-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: bfa: bfa_svc.c: make two functions staticJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/bfa/bfa_svc.c:4288:1: warning: symbol 'bfa_fcport_ddportenable' was not declared. Should it be static? drivers/scsi/bfa/bfa_svc.c:4297:1: warning: symbol 'bfa_fcport_ddportdisable' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407032202.36789-2-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: gdth: Make __gdth_execute staticWang Hai1-2/+2
Fix sparse warning: drivers/scsi/gdth.c:332:5: warning: symbol '__gdth_execute' was not declared. Should it be static? Link: https://lore.kernel.org/r/1586276474-34480-1-git-send-email-wanghai38@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: qla2xxx: Use ARRAY_SIZE() instead of open-coding itBart Van Assche1-18/+18
This patch does not change any functionality. Link: https://lore.kernel.org/r/20200413021359.21725-1-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: Update referenced link to cdrtoolsDiego Elio Pettenò1-1/+1
Link: https://lore.kernel.org/r/20200413170501.13381-1-flameeyes@flameeyes.com Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-14scsi: sg: add sg_remove_request in sg_writeWu Bo1-1/+3
If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qla2xxx: Split qla2x00_configure_local_loop()Bart Van Assche1-42/+50
The size of the function qla2x00_configure_local_loop() hurts its readability. Hence split that function. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200405225905.17171-1-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: sg: add sg_remove_request in sg_common_writeLi Bin1-1/+3
If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Fix termination timeouts in session logoutNilesh Javali1-0/+3
The destroy connection ramrod timed out during session logout. Fix the wait delay for graceful vs abortive termination as per the FW requirements. Link: https://lore.kernel.org/r/20200408064332.19377-7-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Add modules param to enable qed iSCSI debugManish Rangankar1-2/+5
Add module parameter to enable debug messages specific to iSCSI functions. Link: https://lore.kernel.org/r/20200408064332.19377-6-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Do not flush offload work if ARP not resolvedNilesh Javali1-1/+2
For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero. ------------[ cut here ]------------ WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0 : Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020 RIP: 0010:__flush_work+0x1c1/0x1d0 Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f 00 31 f6 RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282 RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898 RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001 R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000 R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00 FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? class_create_release+0x40/0x40 ? klist_put+0x2c/0x80 qedi_ep_disconnect+0xdd/0x400 [qedi] iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi] iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi] ? __netlink_lookup+0xe7/0x160 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1e2/0x240 ? copy_msghdr_from_user+0xd9/0x160 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0xa2/0xe0 ? hrtimer_try_to_cancel+0x25/0x100 ? do_nanosleep+0x9c/0x170 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f65f6f16107 Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8 0 00 00 00 00 53 48 89 f3 48 RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107 RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003 RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0 R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000 ---[ end trace 54f499c05d41f8bb ]--- Only flush if the connection endpoint state if different from OFLDCONN_NONE. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Use correct msix count for fastpath vectorsManish Rangankar1-1/+1
Use MSI-X count provided by qed. Link: https://lore.kernel.org/r/20200408064332.19377-4-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Avoid unnecessary endpoint allocation on link downManish Rangankar1-6/+5
No need to allocate and deallocate endpoint memory if the physical link is down. Link: https://lore.kernel.org/r/20200408064332.19377-3-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedi: Remove additional char from boot target iqnnameManish Rangankar1-1/+1
While parsing the iSCSI TLV data to MFW request, a newline was added to the firmware boot target iqnname string. Because of this, we were getting the following error even after the boot target was successfully logged in: "[qedi_get_protocol_tlv_data:1197]:1: Boot target not set" Remove the trailing newline. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-2-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qedf: Simplify mutex_unlock() usageDaniel Wagner1-7/+3
The commit 6d1368e8f987 ("scsi: qedf: fixup locking in qedf_restart_rport()") introduced the lock. Though the lock protects only the fc_rport_create() call. Thus, we can move the mutex unlock up before the if statement and drop the else body. Link: https://lore.kernel.org/r/20200403092717.19779-1-dwagner@suse.de Cc: Hannes Reinecke <hare@suse.com> Cc: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: qla2xxx: Fix regression warningsNilesh Javali4-6/+2
drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf' can be reduced. [variableScope] drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a value that is never used. [unreadVariable] drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in rsp_els already zeroes out memory, so memset is not needed drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed [mkp: added newline after variable declaration] Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13scsi: hisi_sas: Fix build error without SATA_HOSTYueHaibing1-0/+1
If SATA_HOST is n, build fails: drivers/scsi/hisi_sas/hisi_sas_main.o: In function `hisi_sas_fill_ata_reset_cmd': hisi_sas_main.c:(.text+0x2500): undefined reference to `ata_tf_to_fis' Select SATA_HOST to fix this. Link: https://lore.kernel.org/r/20200402085812.32948-1-yuehaibing@huawei.com Fixes: bd322af15ce9 ("ata: make SATA_PMP option selectable only if any SATA host driver is enabled") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds29-622/+643
Pull more SCSI updates from James Bottomley: "This is a batch of changes that didn't make it in the initial pull request because the lpfc series had to be rebased to redo an incorrect split. It's basically driver updates to lpfc, target, bnx2fc and ufs with the rest being minor updates except the sr_block_release one which fixes a use after free introduced by the removal of the global mutex in the first patch set" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits) scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear scsi: bnx2fc: fix boolreturn.cocci warnings scsi: zfcp: use fallthrough; scsi: aacraid: do not overwrite retval in aac_reset_adapter() scsi: sr: Fix sr_block_release() scsi: aic7xxx: Remove more FreeBSD-specific code scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug scsi: ufs: set device as active power mode after resetting device scsi: iscsi: Report unbind session event when the target has been removed scsi: lpfc: Change default SCSI LUN QD to 64 scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted scsi: libfc: If PRLI rejected, move rport to PLOGI state scsi: bnx2fc: Update the driver version to 2.12.13 scsi: bnx2fc: Fix SCSI command completion after cleanup is posted scsi: bnx2fc: Process the RQE with CQE in interrupt context scsi: target: use the stack for XCOPY passthrough cmds scsi: target: increase XCOPY I/O size scsi: target: avoid per-loop XCOPY buffer allocations scsi: target: drop xcopy DISK BLOCK LENGTH debug ...
2020-04-10Merge tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-blockLinus Torvalds2-3/+0
Pull block fixes from Jens Axboe: "Here's a set of fixes that should go into this merge window. This contains: - NVMe pull request from Christoph with various fixes - Better discard support for loop (Evan) - Only call ->commit_rqs() if we have queued IO (Keith) - blkcg offlining fixes (Tejun) - fix (and fix the fix) for busy partitions" * tag 'block-5.7-2020-04-10' of git://git.kernel.dk/linux-block: block: fix busy device checking in blk_drop_partitions again block: fix busy device checking in blk_drop_partitions nvmet-rdma: fix double free of rdma queue blk-mq: don't commit_rqs() if none were queued nvme-fc: Revert "add module to ops template to allow module references" nvme: fix deadlock caused by ANA update wrong locking nvmet-rdma: fix bonding failover possible NULL deref loop: Better discard support for block devices loop: Report EOPNOTSUPP properly nvmet: fix NULL dereference when removing a referral nvme: inherit stable pages constraint in the mpath stack device blkcg: don't offline parent blkcg first blkcg: rename blkcg->cgwb_refcnt to ->online_pin and always use it nvme-tcp: fix possible crash in recv error flow nvme-tcp: don't poll a non-live queue nvme-tcp: fix possible crash in write_zeroes processing nvmet-fc: fix typo in comment nvme-rdma: Replace comma with a semicolon nvme-fcloop: fix deallocation of working context nvme: fix compat address handling in several ioctls
2020-04-08Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe2-3/+0
Pull NVMe fixes from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvmet-rdma: fix double free of rdma queue nvme-fc: Revert "add module to ops template to allow module references" nvme: fix deadlock caused by ANA update wrong locking nvmet-rdma: fix bonding failover possible NULL deref nvmet: fix NULL dereference when removing a referral nvme: inherit stable pages constraint in the mpath stack device nvme-tcp: fix possible crash in recv error flow nvme-tcp: don't poll a non-live queue nvme-tcp: fix possible crash in write_zeroes processing nvmet-fc: fix typo in comment nvme-rdma: Replace comma with a semicolon nvme-fcloop: fix deallocation of working context nvme: fix compat address handling in several ioctls
2020-04-04nvme-fc: Revert "add module to ops template to allow module references"James Smart2-3/+0
The original patch was to resolve the lldd being able to be unloaded while being used to talk to the boot device of the system. However, the end result of the original patch is that any driver unload while a nvme controller is live via the lldd is now being prohibited. Given the module reference, the module teardown routine can't be called, thus there's no way, other than manual actions to terminate the controllers. Fixes: 863fbae929c7 ("nvme_fc: add module to ops template to allow module references") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-04-03Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-2/+2
Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-03Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdxLinus Torvalds2-0/+2
Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.