aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-03-20[SUNSU]: Fix missing spinlock initialization.David S. Miller1-0/+2
Caught by CONFIG_DEBUG_SPINLOCK. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC] serial: Make sure sysfs nodes get named correctly.David S. Miller4-0/+6
Because we play this trick where we use ttyS? in increasing minor numbers for different sunfoo.c drivers, we have to inform the TTY layer of this. Do so by setting the tty->name_base appropriately. Probably there should be a generic way to do this in the serial core, but for now... Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Fix locking in sunhv_start_tx()David S. Miller1-6/+2
Caller takes the lock already. Also, fixup the poll loop in sunhv_break_ctl(). Just like in console write, we udelay(2) and use a loop limit of 1000000 iterations. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Put sunhv.o earliest in the list of sparc serial drivers.David S. Miller1-1/+1
So that it will show up as /dev/ttyS0. Otherwise things like installers will try to run on whatever serial port gets probed first. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Support SYSRQ properly.David S. Miller1-0/+2
By calling uart_handle_break(). We'll still do the "sun_do_break()" handling if the user gives two breaks in a row. We should probably do this in the other Sparc serial drivers too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Fix OOPS on sunhv interrupts.David S. Miller1-16/+36
Until the uart is openned, port->info is NULL. Also, init the port->irq properly and give a non-zero port->membase so that the uart device reporting is done. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Decode virtual-devices interrupts correctly.David S. Miller1-10/+4
Need to translate through the interrupt-map{,-mask] properties. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Bug fixes.David S. Miller1-15/+10
Add udelay to polling console write loop, and increment the loop limit. Name the device "ttyHV" and pass that to add_preferred_console() when we're using hypervisor console. Kill sunhv_console_setup(), it's empty. Handle the case where we don't want to use hypervisor console. (ie. we have a head attached to a sun4v machine) Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Use virtual-devices layer to get interrupt.David S. Miller1-6/+67
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Prevent registering wrong serial console.David S. Miller3-26/+47
If the console is not for a particular Sun serial controller, set the drv->cons to NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Add SUN4V Hypervisor Console driver.David S. Miller3-0/+489
Since it can do things like BREAK and HUP, we implement this as a serial uart driver. This still needs interrupt probing code, as I haven't figured out how interrupts will work or be probed for on SUN4V yet. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-11[PATCH] Altix: small ioc4 oversightPat Gefre1-4/+2
Get rid of the local 'flip' variable and no need to 'trim' the buffer. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] serial core: work around sub-driver bugsPavel Machek1-3/+29
We're presently getting oopses because Bluetooth (and possibly other) drivers are calling core functions after things have been shut down. So rather than oopsing, let's drop a warning then take avoiding action, so the machine survives. Once all the sub-drivers are fixed up we can remove the take-avoiding-action part. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds1-1/+1
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] mca recovery return value when no bus check [IA64] SGI SN drivers: don't report !sn2 hardware as an error [IA64] don't report !sn2 or !summit hardware as an error [IA64] gensparse_defconfig: turn on PNPACPI [IA64] Increase severity of MCA recovery messages
2006-03-07[IA64] SGI SN drivers: don't report !sn2 hardware as an errorBjorn Helgaas1-1/+1
This stuff is all in the generic ia64 kernel, and the new initcall error reporting complains about them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-07[SERIAL] ip22zilog: Fix oops on runlevel change with serial consoleMartin Michlmayr1-3/+1
Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer. This has been fixed in the sunsab and sunzilog serial drivers in October 2005. Update the ip22zilog, which is based on sunzilog, accordingly. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk
2006-02-28[SUNSU]: Fix locking error in sunsu_stop_rx().David S. Miller1-3/+0
The caller takes the UART port lock, so we shouldn't try to take it again. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-23[SERIAL] Add comment about early_serial_setup()Russell King1-0/+6
early_serial_setup() must not be called after console initialisation. Add a comment prior to the function explicitly stating this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-15[SERIAL] Fix typo in commentRalf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-15[SERIAL] Documentation/jsm.txt is a no show.Arthur Othieno1-2/+2
In kernel bugzilla #5176 (http://bugzilla.kernel.org/show_bug.cgi?id=5176) Harry R\374ter <h.rueter@gmx.de> points out Documentation/jsm.txt is missing. No one at Digi seems to care, so just remove the stale reference. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-10[SERIAL] Remove incorrect code from ioc4 serial driverRussell King1-14/+0
Serial drivers in general should not write uart_info->flags - they're private to serial_core. Serial drivers have no need to fiddle with tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags. Fix the ioc4 serial driver for both these points by simply removing the offending code. Acked-by: pfg@sgi.com Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds20-58/+58
2006-02-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+4
Manual conflict merge of arch/arm/Kconfig
2006-02-08[SERIAL] 8250_pci: add new PCI serial card supportYoichi Yuasa1-0/+4
This patch adds new PCI serial card support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[SERIAL] ip22zilog: Whitespace cleanup.Ralf Baechle2-4/+5
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[SERIAL] PPC32 CPM_UART: update to utilize the new TTY flip APIVitaly Bordug1-9/+4
This replaces old direct usage of tty->flip stuff with relative flip API calls. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[SERIAL] Fix compile error in 8250_au1x00.cJordan Crouse1-1/+0
The DB1550 actually doesn't have a UART2. Remove it from the list. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[SERIAL] 8250 serial console update uart_8250_port ierKumar Gala1-0/+1
On some embedded PowerPC (MPC834x) systems an extra byte would some times be required to flush data out of the fifo. serial8250_console_write() was updating the IER in hardware without also updating the copy in uart_8250_port. This causes issues functions like serial8250_start_tx() and __stop_tx() to misbehave. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3283/1: S3C2400 - defines the number of serial portsLucas Correia Villa Real1-0/+4
Patch from Lucas Correia Villa Real This patch defines the number of serial ports on the S3C2400. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[PATCH] m32r_sio iomem annotationsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] m68knommu: use tty_schedule_flip() in 68328serial.cGreg Ungerer1-2/+2
Use the new tty_schedule_flip() instead of the original direct schedule_work of the flip buffer. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07[PATCH] m68knommu: use tty_schedule_flip() in 68360serial.cGreg Ungerer1-2/+2
Use the new tty_schedule_flip() instead of the original direct schedule_work of the flip buffer. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07[PATCH] m68knommu: compile fixes for mcfserial.cGreg Ungerer1-10/+6
Re-organize the default CONSOLE baud rate define setting so that it is only set once. Use the new tty_schedule_flip() instead of the original direct schedule_work of the flip buffer. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[SERIAL] uart_port flags member should use UPF_*Russell King2-6/+6
Convert usage of ASYNC_* to UPF_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05[SERIAL] uart_port iotype member should use UPIO_*Russell King15-38/+38
Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds3-2/+26
2006-02-03[SERIAL] 8250: limit range of runtime portsRussell King1-0/+1
Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-03[PATCH] drivers/serial/jsm/: cleanupsAdrian Bunk3-5/+0
- jsm_driver.c: remove the now unused jsm_rawreadok module_param - jsm_tty.c: remove a now unused variable Is there any problem with removing the now useless jsm_rawreadok module_param? Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: V. Ananda Krishnan <mansarov@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] jsm: update for tty buffering revampV. Ananda Krishnan2-157/+79
Signed-off-by: V. Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] Fix some ucLinux breakage from the tty updatesAlan Cox1-2/+1
Breakage reported by Adrian Bunk Untested (no hardware) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-02[SERIAL] initialize spinlock for port failed to setup consoleAtsushi Nemoto1-1/+1
It seems serial_core intend to initialize port->lock just once for each ports. This is done in uart_set_options() for console, and in uart_add_one_port() for other ports. But there is a case the port->lock is not initialized by serial_core. If the setup function for the console was failed, it will not call uart_set_options() but the port is marked as console (uart_console(port) returns 1). It can happen if console was PCI port which can not detected at the time of register_console. This patch is to initialize port->lock for such console port. With this change, most of spin_lock_init() (some of them are labeled "Temporary fix.") in low-level serial drivers can be omitted. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-02[SERIAL] SIIG 8-port serial boards supportAndrey Panin1-1/+24
This patch adds support for SIIG 8-port boards. These boards have 4 ports in separate bars and another 4 ports in the single bar. Because of this strange port arrangement these cards need special setup function. Fortunately no other SIIG cards have more than 4 port, so this setup function could be used for them too. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds1-11/+11
2006-02-01[PATCH] sh: sh-sci clock framework updatesPaul Mundt2-116/+223
A couple of updates for the sh-sci serial driver: - Update for clock framework on sh. - Fix a compile error introduced by some h8300 changes. - Add SH7770/SH7780 subtype support. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] jsm: fix for high baud rates problemV. Ananda Krishnan1-47/+38
Scott Kilau <Scott_Kilau@digi.com> Digi serial port console doesn't work when baud rates are set higher than 38400. So the lookup table and code in jsm_neo.c has been modified and tested. Please let me have the feed-back. Signed-off-by: V.Ananda Krishnan <mansarov@us.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds11-89/+84
2006-01-31Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-3/+3
2006-01-26[ARM] 3266/1: S3C2400 - adds macro S3C24XXLucas Correia Villa Real1-1/+1
Patch from Lucas Correia Villa Real This patch defines S3C2400 memory map and adds a S3C24XX macro for common resources between S3C2400, S3C2410 and S3C2440 cpus. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-24[ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi branches into releaseLen Brown1-11/+11
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-23[SERIAL] 8250 Documentation fixTimothy Charles McGrath1-1/+1
This fixes the documentation error for 'SERIAL_8250' in drivers/serial/Kconfig Signed-off-by: Timothy Charles McGrath <tmHikaru@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.