aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/sh (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-11-11Merge branches 'sh/pm-runtime' and 'common/clkfwk' into sh-fixes-for-linusPaul Mundt8-88/+99
2011-11-11sh: clkfwk: Kill off remaining debugfs cruft.Paul Mundt1-87/+0
Now that all of the named string association with clocks has been migrated to clkdev lookups there's no meaningful named topology that can be constructed for a debugfs tree view. Get rid of the left over bits, and shrink struct clk a bit in the process. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11drivers: sh: Kill off dead pathname for runtime PM stub.Paul Mundt1-3/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11drivers: sh: Generalize runtime PM platform stub.Paul Mundt2-0/+75
The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-06Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds4-0/+5
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-05sh: intc: Allow triggering on both edges for ARM SoCsMagnus Damm1-1/+1
Enable IRQ_TYPE_EDGE_BOTH on all R/SH-Mobile ARM SoCs. This hardware feature is supported by sh7367, sh7377, sh7372 and sh73a0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05sh: clkfwk: add clk_rate_mult_range_round()Kuninori Morimoto1-0/+20
This provides a clk_rate_mult_range_round() helper for use by some of the CPG PLL ranged multipliers, following the same approach as used by the div ranges. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-31drivers/sh: Add export.h for EXPORT_SYMBOL to intc/virq.cPaul Gortmaker1-0/+1
This is exporting symbols and will fail to build once we remove the implicit presence of module.h Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sh: Add export.h to arch/sh specific files as required.Paul Gortmaker1-0/+1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sh: Add module.h to arch/sh specific files as required.Paul Gortmaker2-0/+2
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31sh: fix implicit use of stat.h in arch/sh specific filesPaul Gortmaker1-0/+1
To fix: arch/sh/drivers/dma/dma-sysfs.c:45:8: error: 'S_IRUGO' undeclared here (not in a function) arch/sh/drivers/dma/dma-sysfs.c:75:8: error: 'S_IWUSR' undeclared here (not in a function) make[4]: *** [arch/sh/drivers/dma/dma-sysfs.o] Error 1 drivers/sh/intc/core.c:449: error: 'S_IRUGO' undeclared here (not in a function) make[5]: *** [drivers/sh/intc/core.o] Error 1 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28sh: userimask.c needs linux/stat.hNobuhiro Iwamatsu1-0/+1
This fix the problem that S_IRUSR and S_IWUSR are not solved in userimask.c. ----- CC drivers/usb/host/r8a66597-hcd.o drivers/sh/intc/userimask.c:57: error: ‘S_IRUSR’ undeclared here (not in a function) drivers/sh/intc/userimask.c:57: error: ‘S_IWUSR’ undeclared here (not in a function) CC drivers/watchdog/shwdt.o ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28sh: pfc: Add GPIO IRQ supportMagnus Damm1-0/+27
Add GPIO IRQ support to the shared PFC code in drivers/sh/pfc.c The enums pointed out by a certain GPIO will be matched against a table for IRQ to enum mappings. Only the shared PFC code is updated by this patch. SoC specific changes are also needed to allow platforms to make use of this feature. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28sh: pfc: get_config_reg() shift clean upMagnus Damm1-1/+1
Clean up the f_width shift code in get_config_reg(). Reported-by: Ryusuke Sakato <ryusuke.sakato.bx@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28sh: intc: Add IRQ trigger bit field checkMagnus Damm1-2/+7
R-Mobile SoCs such as sh73a0 include PINT blocks in INTC that come with 2-bit IRQ trigger support. Add code to make sure the bit width is checked so 4-bit only modes like for instance EDGE_BOTH will fail for PINT. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-08Merge branch 'common/core' into sh-latestPaul Mundt1-0/+3
2011-08-01Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.xLinus Torvalds1-2/+27
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
2011-07-21sh: intc: enable both edges GPIO interrupts on sh7372Magnus Damm1-0/+3
IRQ-capable GPIOs on sh7372 can be configured to produce interrupts on both edges. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-20switch assorted clock drivers to debugfs_remove_recursive()Al Viro1-5/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-06-24sh: clkfwk: Convert to IS_ERR_OR_NULL.Paul Mundt1-1/+1
Trivial cleanup. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24drivers: sh: late disabling of clocks V2Magnus Damm1-1/+26
This V2 patch changes the clock disabling behavior during boot. Two different changes are made: 1) Delay disabling of clocks until late in the boot process. This fixes an existing issue where in-use clocks without software reference are disabled by mistake during boot. One example of this is the handling of the Mackerel serial console output that shares clock with the I2C controller. 2) Write out the "disabled" state to the hardware for clocks that not have been used by the kernel. In other words, make sure so far unused clocks actually get turned off. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14drivers: sh: resume enabled clocks fixMagnus Damm1-1/+1
Extend the SH / SH-Mobile ARM clock framework to only resume clocks that have been enabled. Without this fix divide-by-zero is triggering on sh7372 FSIDIV during system wide resume of Suspend-to-RAM. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-23Merge branch 'sh/genirq-threading' into sh-latestPaul Mundt1-0/+5
2011-04-27sh: intc: Set virtual IRQs as nothread.Paul Mundt1-0/+5
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-18sh: clkfwk: fixup clk_rate_table_build parameter in div6 clockKuninori Morimoto1-1/+1
div6 clock should not use arch_flags for clk_rate_table_build, because SH_CLK_DIV6_EXT doesn't care .arch_flags. clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-30sh: Fix irq cleanup falloutThomas Gleixner1-2/+2
I missed that coccinelle does not fix up header files by default. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <lethal@linux-sh.org>
2011-03-29sh: Convert to new function namesThomas Gleixner2-13/+13
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29sh: Use the proper accessor functionsThomas Gleixner1-7/+2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23sh: Use struct syscore_ops instead of sysdevsRafael J. Wysocki3-99/+65
Convert the SuperH clocks framework and shared interrupt handling code to using struct syscore_ops instead of a sysdev classes and sysdevs for power managment. This reduces the code size significantly and simplifies it. The optimizations causing things not to be restored after creating a hibernation image are removed, but they might lead to undesirable effects during resume from hibernation (e.g. the clocks would be left as the boot kernel set them, which might be not the same way as the hibernated kernel had seen them before the hibernation). This also is necessary for removing sysdevs from the kernel entirely in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19sh: update INTC to clear IRQ sense valid flagMagnus Damm1-2/+4
Clear the valid flag is in the INTC code. Without this fix bit 7 of the sense register is mistakenly set. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-10headers: kobject.h reduxAlexey Dobriyan1-1/+0
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-24sh: intc: Initialize radix tree gfp mask explicitly.Paul Mundt1-0/+1
Presently the root node is initialized by way of kzalloc on the parent data structure, which by chance happens to do the bulk of what an explicit initialization does with GFP_NOWAIT semantics. This however is more by luck than by design, and as we ideally want to permit radix node allocations access to the emergency pools anyways, add in the proper initializer with the desired mask. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19Merge branch 'common/clkfwk' into sh-fixes-for-linusPaul Mundt2-1/+4
2010-11-19sh: clkfwk: Build fix for non-legacy CPG changes.Paul Mundt2-1/+4
The disabling of the init op for non-legacy clocks neglected to do the same in the core clock framework, resulting in a build failure. Fix it up. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16Merge branch 'common/clkfwk' into sh-fixes-for-linusPaul Mundt2-13/+5
2010-11-15sh: clkfwk: Kill off now unused algo_id in set_rate op.Paul Mundt2-6/+4
Now that clk_set_rate_ex() is gone, there is also no way to get at rate setting algo id, which is now also completely unused. Kill it off before new clock ops start using it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15sh: clkfwk: Kill off unused clk_set_rate_ex().Paul Mundt1-9/+3
With the refactoring of the SH7722 clock framework some time ago this abstraction has become unecessary. Kill it off before anyone else gets the bright idea to start using it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15sh: intc: Fix up build failure introduced by radix tree changes.Paul Mundt1-1/+1
The radix tree retry logic got a bit of an overhaul and subsequently broke the virtual IRQ subgroup build. Simply switch over to radix_tree_deref_retry() as per the filemap changes, which the virq lookup logic was modelled after in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10sh: clkfwk: fix up compiler warnings.Paul Mundt1-2/+2
CC drivers/sh/clk/core.o drivers/sh/clk/core.c: In function 'clk_round_parent': drivers/sh/clk/core.c:574: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' drivers/sh/clk/core.c:594: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linusPaul Mundt3-4/+96
2010-11-08sh: clkfwk: Fix up checkpatch warnings.Paul Mundt1-5/+22
The clk_round_parent() change introduced various checkpatch warnings, tidy them up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08sh: add clk_round_parent() to optimize parent clock rateGuennadi Liakhovetski1-0/+75
Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01sh: intc: Update for single IRQ reservation helper.Paul Mundt2-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01sh: clkfwk: Fix up rate rounding error handling.Paul Mundt1-2/+2
According to the linux/clk.h definition we should be handing back an errno value or a valid rate. This fixes up the case where 0 can be returned for invalid frequencies or cases where rounding has no selectable candidate. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28sh: intc: switch irq_desc iteration to new active IRQ iterator.Paul Mundt1-8/+2
There's no need to iterative over every single irq_desc when we can already work out which IRQs have a backing descriptor via the shiny new for_each_active_irq(). Switch to that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27sh: intc: irq_data conversion.Paul Mundt4-40/+68
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27sh: maple: ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt1-10/+10
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26sh: Switch dynamic IRQ creation to generic irq allocator.Paul Mundt2-75/+9
Now that the genirq code provides an IRQ bitmap of its own and the necessary API to manipulate it, there's no need to keep our own version around anymore. In the process we kill off some unused IRQ reservation code, with future users now having to tie in to the genirq API as normal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26sh: Sanitize sparse irqThomas Gleixner2-19/+14
Switch over to the new allocator functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-18sh: clkfwk: Shuffle around to match the intc split up.Paul Mundt4-5/+16
This shuffles the clock framework code around to a drivers/sh/clk subdir, to follow the intc split up. This will make it easier to subsequently break things out as well as plug in different helpers for non-CPG users. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.