aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc/qcom (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-09-10Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds4-4/+9
Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-08-08soc: qcom: mdt_loader: Use request_firmware_into_buf()Bjorn Andersson1-3/+2
By switching to the request_firmware_into_buf() we load the segment data straight into the preallocated buffers, reducing the need for allocating scratch buffers for these. In particular the modem firmware consists of multiple segments in the range 5-15MB, making this worth while. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: bring all qcom drivers into a submenuSrinivas Kandagatla1-0/+4
As the number of qcom drivers increase, entries in SOC menu looks scattered with other SOC drivers. Make a submenu for Qcom drivers to make it visibly clear while selecting qcom SOC specific drivers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE()Rob Clark1-0/+1
This fixes a problem of wifi module not loading on db410c. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08soc: qcom: smsm: fix of_node refcnting problemRob Clark1-1/+2
of_find_node_with_property() drops the reference to the 'from' node, which eventually (after enough -EPROBE_DEFERs) drops the last reference to the node causing all sorts of fun problems, and this nice splat. BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 33, name: kworker/0:1 4 locks held by kworker/0:1/33: #0: ("events"){.+.+.+}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #1: (deferred_probe_work){+.+.+.}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728 #2: (&dev->mutex){......}, at: [<ffff000008676078>] __device_attach+0x30/0x168 #3: (devtree_lock){......}, at: [<ffff000008828fd0>] of_find_node_with_property+0x30/0xe0 irq event stamp: 18976 hardirqs last enabled at (18975): [<ffff00000815794c>] __down_trylock_console_sem+0x74/0xb8 hardirqs last disabled at (18976): [<ffff0000089e26d4>] _raw_spin_lock_irqsave+0x2c/0x78 softirqs last enabled at (16880): [<ffff0000080e0f00>] __do_softirq+0x580/0x640 softirqs last disabled at (16871): [<ffff0000080e13a4>] irq_exit+0xe4/0x138 CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Call trace: [<ffff000008089ee0>] dump_backtrace+0x0/0x230 [<ffff00000808a134>] show_stack+0x24/0x30 [<ffff0000084e1944>] dump_stack+0xac/0xe8 [<ffff00000810d7e0>] ___might_sleep+0x150/0x230 [<ffff00000810d918>] __might_sleep+0x58/0x90 [<ffff0000089dde18>] __mutex_lock+0x50/0x870 [<ffff0000089de674>] mutex_lock_nested+0x3c/0x50 [<ffff000008388ae0>] kernfs_remove+0x30/0x50 [<ffff00000838b720>] sysfs_remove_dir+0x58/0x70 [<ffff0000084e393c>] kobject_del+0x1c/0x58 [<ffff0000084e374c>] kobject_put+0xb4/0x208 [<ffff00000882c364>] of_node_put+0x24/0x30 [<ffff000008829018>] of_find_node_with_property+0x78/0xe0 [<ffff000000aff5f4>] qcom_smsm_probe+0x194/0x720 [smsm] [<ffff0000086793b4>] platform_drv_probe+0x74/0x110 [<ffff0000086765bc>] driver_probe_device+0x2b4/0x420 [<ffff000008676920>] __device_attach_driver+0xd0/0x150 [<ffff000008673e78>] bus_for_each_drv+0x68/0xa8 [<ffff00000867611c>] __device_attach+0xd4/0x168 [<ffff000008676a1c>] device_initial_probe+0x24/0x30 [<ffff000008675380>] bus_probe_device+0xa0/0xa8 [<ffff000008675948>] deferred_probe_work_func+0xb8/0xf8 [<ffff0000080fa9d4>] process_one_work+0x25c/0x728 [<ffff0000080faef4>] worker_thread+0x54/0x3d8 [<ffff0000081031d8>] kthread+0x110/0x140 [<ffff000008082d90>] ret_from_fork+0x10/0x40 OF: ERROR: Bad of_node_put() on /smsm CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G W E 4.12.0-rc5+ #1455 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 Workqueue: events deferred_probe_work_func Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-02soc: qcom: GLINK SSR notifierBjorn Andersson3-0/+174
This driver register as a subsystem restart notifier and will send out notifications to remote processors that has opened the "glink_ssr" GLINK channel. This mechanism is used to signal any GLINK participants that a 3rd party is gone and that the communication state has to be reset; i.e. that read and write pointers of the GLINK FIFOs are stale. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-06-05soc: qcom: smsm: Improve error handling, quiesce probe deferralJonathan Neuschäfer1-4/+5
Don't use size if info indicates an error condition. Previously a non-ENOENT error (such as -EPROBE_DEFER) would lead to size being used even though it hadn't necessarily been initialized in qcom_smem_get. Don't print an error message in the -EPROBE_DEFER case. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-03-28soc: qcom: smd-rpm: Add msm8996 compatibilityBjorn Andersson1-0/+1
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM driver ontop of GLINK for 8996, without any modifications. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28soc: qcom: smd: Remove standalone driverBjorn Andersson3-1569/+0
Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28soc: qcom: smd: Transition client drivers from smd to rpmsgBjorn Andersson3-46/+53
By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22remoteproc: qcom: mdt_loader: Use signed type for offsetBjorn Andersson1-1/+1
In the transition from using rproc_da_to_va(), the type of the load offset became unsigned. This causes the subsequent check to let negative values less than p_memsz + mem_size through and we write outside of the buffer. Change the type back to a signed value to catch this. Fixes: 7f0dd07a9b29 ("remoteproc: qcom: mdt_loader: Refactor MDT loader") Fixes: e7fd25226295 ("remoteproc: qcom: q6v5: Decouple driver from MDT loader") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: Move qcom_mdt_loader into drivers/soc/qcomBjorn Andersson3-0/+209
With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-01soc: qcom: smd: Reset rx tail rather than txBjorn Andersson1-1/+1
The local end of each SMD channel is responsible for updating the tx head and the rx tail, as such we should not touch the tx tail during a reset. Reported-by: Jeremy McNicoll <jmcnicol@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Represent smd edges as devicesBjorn Andersson1-75/+122
By representing each edge as its own device the channels are no longer tied to being parented by the same smd device and as such an edge can live as children of e.g. remoteproc instances. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Request irqs after parsing propertiesBjorn Andersson1-16/+16
The code exectued by the interrupt handler depends on the values parsed after requesting the irq, just to be save we should therefor move the request_irq() call to be done after parsing the properties. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Simplify multi channel handlingBjorn Andersson1-18/+16
Multi-channel clients split between several drivers need a way to close individual channels, as these drivers might be removed individually. With this in place the responsibility of closing additionally opened channels to the client as well only concerning smd about the primary channel. With this approach we will only trigger removal of SMD devices based on the state of the primary channel, however we get in sync with how rpmsg works. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smem: Silence probe defer errorStephen Boyd1-1/+2
If we fail to get the hwspinlock due to probe defer, we shouldn't print an error message. Just be silent in this case. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24soc: qcom: Update properties for smem state referencingBjorn Andersson2-7/+7
Update the property names to match device tree bindings, the correct values should be qcom,smem-states and qcom,smem-state-names. Also update the #qcom,smem-state-cells for consistency, before we merge any users of these properties. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24soc: qcom: smp2p: Drop io-accessorsBjorn Andersson1-2/+2
SMEM is now mapped write-combine and we can use memcpy to access the name of the entires. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24soc: qcom: smp2p: Correct addressing of outgoing valueBjorn Andersson1-1/+2
The valid_entries index should not be incremented until after we have acquired the pointer to the value, or we will read and write data one item off. Fixes: 50e99641413e ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-24soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other componentsBjorn Andersson1-19/+106
We need the signal from wcnss_ctrl indicating that the firmware is up and running before we can communicate with the other components of the chip. So make these other components children of the wcnss_ctrl device, so they can be probed in order. The process seems to take between 1/2-5 seconds, so this is done in a worker, instead of holding up the probe. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-73/+202
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
2016-04-20soc: qcom: spm: Use const and __initconst for qcom_cpuidle_opsJisheng Zhang1-1/+1
The qcom_cpuidle_ops structures is not over-written, so add "const" qualifier and replace __initdata with __initconst. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org>
2016-04-19soc: qcom: smd: Make callback pass channel referenceBjorn Andersson3-11/+28
By passing the smd channel reference to the callback, rather than the smd device, we can open additional smd channels from sub-devices of smd devices. Also updates the two smd clients today found in mainline. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19soc: qcom: smem: Use write-combine remap for SMEMBjorn Andersson1-2/+1
Mapping the SMEM region as write combine makes the contiguous writes in SMD perform better and also allows us to do unaligned read and writes on ARM64. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Support opening additional channelsBjorn Andersson1-0/+76
With the qcom_smd_open_channel() API we allow SMD devices to open additional SMD channels, to allow implementation of multi-channel SMD devices - like Bluetooth. Channels are opened from the same edge as the calling SMD device is tied to. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Support multiple channels per sdevBjorn Andersson1-3/+11
This patch allows chaining additional channels to a SMD device, enabling implementation of multi-channel SMD devies - like Bluetooth. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Refactor channel open and close handlingBjorn Andersson1-22/+40
Refactor opening and closing of channels into two separate functions instead of open coding this in the various places. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Split discovery and state change workBjorn Andersson1-27/+31
Split the two steps of channel discovery and state change handling into two different workers. This allows for new channels to be found while we're are probing, which is required as we introduce multi-channel support. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Introduce callback setterBjorn Andersson1-8/+17
Introduce a setter for the callback function pointer to clarify the locking around the operation and to reduce some duplication. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30drivers: qcom: spm: avoid module usage in non-modular SPM driverLina Iyer1-5/+3
SPM driver provides cpuidle support on some QC SoC's. The functionality is non-modular and there is no need for module support. Convert module platform init to builtin platform driver init. The driver functionality is not affected by this change. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-01-22Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
2016-01-22soc: qcom/spm: shut up uninitialized variable warningArnd Bergmann1-1/+1
gcc warns about the 'found' variable possibly being used uninitialized: drivers/soc/qcom/spm.c: In function 'spm_dev_probe': drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized] However, the code is correct because we know that there is always at least one online CPU. This initializes the 'found' variable to zero before the loop so the compiler knows it does not have to warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-01-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-9/+4
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ...
2016-01-20Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds7-0/+1709
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2016-01-20drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding itStephen Boyd1-9/+4
Now that we have a generic library function for this, replace the open-coded instance. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: <zajec5@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-22ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hookLorenzo Pieralisi1-5/+5
The suspend() hook in the cpuidle_ops struct is always called on the cpu entering idle, which means that the cpu parameter passed to the suspend hook always corresponds to the local cpu, making it somewhat redundant. This patch removes the logical cpu parameter from the ARM cpuidle_ops.suspend hook and updates all the existing kernel implementations to reflect this change. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lina Iyer <lina.iyer@linaro.org> Tested-by: Lina Iyer <lina.iyer@linaro.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> [psci] Cc: Lina Iyer <lina.iyer@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-14soc: qcom: smd-rpm: Add existing platform supportAndy Gross1-0/+2
This patch adds support for all current Qualcomm platforms which utilize RPM over SMD. This includes both MSM8916 and APQ8084. Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: Introduce WCNSS_CTRL SMD clientBjorn Andersson3-0/+280
The WCNSS_CTRL SMD client is used for among other things upload nv firmware to a newly booted WCNSS chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08ARM: qcom: select ARM_CPU_SUSPEND for power managementArnd Bergmann1-0/+1
The qcom spm driver uses cpu_resume_arm(), which is not included in the kernel in all configurations: drivers/built-in.o: In function `qcom_cpu_spc': :(.text+0xbc022): undefined reference to `cpu_suspend' drivers/built-in.o: In function `qcom_cpuidle_init': :(.init.text+0x610c): undefined reference to `cpu_resume_arm' This adds a 'select' Kconfig statement to ensure it's always enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: enable smsm/smp2p modular buildArnd Bergmann1-2/+2
The newly added smp2p and smsm drivers cannot be loadable modules but depend on smem, which can be, and that causes a link error: drivers/built-in.o: In function `qcom_smp2p_intr': :(.text+0xa6e68): undefined reference to `qcom_smem_get' drivers/built-in.o: In function `qcom_smp2p_probe': :(.text+0xa7320): undefined reference to `qcom_smem_alloc' :(.text+0xa736c): undefined reference to `qcom_smem_get' drivers/built-in.o: In function `qcom_smsm_probe': :(.text+0xa7b34): undefined reference to `qcom_smem_get' This marks all the drivers as 'tristate' to make the Kconfig dependency resolution work properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: dbb04bd7122f ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Fixes: d7387fc6add4 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: smp2p: Qualcomm Shared Memory Point to PointBjorn Andersson3-0/+587
Introduce the Qualcomm Shard Memory Point to Point driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: smsm: Add driver for Qualcomm SMSMBjorn Andersson3-0/+634
This driver exposed the Qualcomm Shared Memory State Machine bits. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08soc: qcom: Introduce common SMEM state machine codeBjorn Andersson3-0/+205
This implements a common API for handling and exposing SMP2P and SMSM state information. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-31soc: qcom: smd-rpm: Correct size of outgoing messageBjorn Andersson1-1/+1
With the removal of VLAIS the size was incorrectly changed to only cover the headers of the packet, resulting in "empty" requests being sent to the RPM. Correct this so the entire message is transfered. Fixes: 50e1b29b4438 ("soc: qcom: smd: Remove use of VLAIS") Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-15soc: qcom/smem: add HWSPINLOCK dependencyArnd Bergmann1-0/+1
This fixes a build error when smem is enabled without hwspinlock: drivers/built-in.o: In function `qcom_smem_alloc': rockchip-efuse.c:(.text+0x7a3e4): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7a568): undefined reference to `__hwspin_unlock' drivers/built-in.o: In function `qcom_smem_remove': rockchip-efuse.c:(.text+0x7a5cc): undefined reference to `hwspin_lock_free' drivers/built-in.o: In function `qcom_smem_probe': rockchip-efuse.c:(.text+0x7a960): undefined reference to `hwspin_lock_request_specific' rockchip-efuse.c:(.text+0x7a988): undefined reference to `of_hwspin_lock_get_id' drivers/built-in.o: In function `qcom_smem_get': rockchip-efuse.c:(.text+0x7aa24): undefined reference to `__hwspin_lock_timeout' rockchip-efuse.c:(.text+0x7aafc): undefined reference to `__hwspin_unlock' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-14soc: qcom: smem: Move RPM message ram out of smem DT nodeStephen Boyd1-43/+30
SMEM is a software construct built on top of a DDR reserved region and sometimes a device memory region called RPM message ram. Having the RPM message ram in the smem DT node's reg property leads to the smem node being located in different places depending on if the message ram is being used or not. Let's add a qcom specific property, qcom,rpm-msg-ram, and point to the device memory from the SMEM node via a phandle. As SMEM is a software construct, it really needs to reside at the root of the DT regardless of whether it's using the message ram or not. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd-rpm: Correct the active vs sleep state flaggingBjorn Andersson1-1/+1
The BIT() was incorrectly inherited from family A and should not be used on family B where the state is denoted by an enum. Reported-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: delete unneeded of_node_putJulia Lawall1-3/+1
Device node iterators perform an of_node_put on each iteration, so putting an of_node_put before a continue results in a double put. A simplified version of the semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator i; @@ i(..., child, ...) { ... when != of_node_get(child) * of_node_put(child); ... * continue; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Correct SMEM items for upper channelsBjorn Andersson1-2/+2
Update the SMEM items for the second set of SMD channels, as these where incorrect. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.