aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc/tegra (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17soc/tegra: pmc: Move powergate initialisation to probeJon Hunter1-15/+68
Commit 8df127456f29 ("soc/tegra: pmc: Enable XUSB partitions on boot") was added as a workaround to ensure that the XUSB powergates or domains were turned on early during boot because as this time the Tegra XHCI driver did not handle the power domains at all. Now that the Tegra XHCI driver has been updated to properly managed the power domains, the workaround to enable the XUSB power domain early has been removed. This also means that we can now move the initialisation of the powergates into the PMC driver probe. Therefore, move the powergate initialisation into the PMC driver probe and return any errors detected. To handle any errors, functions to cleanup and remove any power-domains registered with the generic power-domain framework have been added. Finally the initialisation of the 'powergates_available' bitmask is kept in the PMC early init function to allow the legacy PMC powergate APIs to be called during early boot for enabling secondary CPUs on 32-bit Tegra devices. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17soc/tegra: pmc: Remove reset sysfs entries on errorJon Hunter1-1/+4
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") added sysfs entries for Tegra reset source and level. However, these sysfs are not removed on error and so if the registering of PMC device is probe deferred, then the next time we attempt to probe the PMC device warnings such as the following will be displayed on boot ... sysfs: cannot create duplicate filename '/devices/platform/7000e400.pmc/reset_reason' Fix this by calling device_remove_file() for each sysfs entry added on failure. Note that we call device_remove_file() unconditionally without checking if the sysfs entry was created in the first place, but this should be OK because kernfs_remove_by_name_ns() will fail silently. Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17soc/tegra: pmc: Fix reset sources and levelsJon Hunter1-15/+29
Commit 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") added support for reading the Tegra reset source and level from sysfs. However, there are a few issues with this commit which are ... 1. The number of reset sources for Tegra210 is defined as 5 but it should be 6. 2. The number of reset sources for Tegra186 is defined as 13 but it should be 15. 3. The SoC data variables num_reset_sources and num_reset_levels are defined but never used. Fix the above by ... 1. Removing the reset source 'AOTAG' from the tegra30_reset_sources because this is only applicable for Tegra210. 2. Adding a new tegra210_reset_sources structure for Tegra210 reset sources. 3. Correct the number of reset sources for Tegra210 and Tegra186 by using the ARRAY_SIZE macro. 4. Updating the functions reset_reason_show() and reset_level_show() to check whether the value read is valid. While we are at it clean-up these functions to remove an unnecessary u32 variable. Fixes: 5f84bb1a4099 ("soc/tegra: pmc: Add sysfs entries for reset info") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-22soc/tegra: pmc: Implement acquire/release for resetsThierry Reding1-6/+33
By implementing the acquire/release protocol, the resets can be shared with other drivers that also adhere to this protocol. This will be used for example by the SOR driver to put hardware into a known good state, irrespective of whether or not the power domain can be reset. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-06Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-140/+298
Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-02-23soc/tegra: default select TEGRA_TIMER for Tegra210Joseph Lo1-0/+1
The tegra timer is necessary for Tegra210 to support CPU idle power-down state. So select it by default. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-01-25soc/tegra: pmc: Support systems where PMC is marked secureMikko Perttunen1-3/+97
On Tegra210 systems with new enough boot software, direct register accesses to PMC register space from the non-secure world are not allowed. Instead a monitor call may be used to read and write PMC registers. Add code to detect such a system by attempting to write a scratch register and detecting if the write happened or not. If not, we switch to doing all register accesses through the monitor call. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Explicitly initialize all fieldsThierry Reding1-1/+9
It's not strictly necessary to initialize the fields in struct tegra_pmc_soc if they are 0/false. However, we already initialize them explicitly even if unnecessary, so keep doing that for consistency. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Make alignment consistentThierry Reding1-11/+18
Some recently added code used weird alignment and indentation. Fix these occurrences to make them consistent with the rest of the code. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Pass struct tegra_pmc * where possibleThierry Reding1-115/+152
Instead of using the global pmc variable, pass around a pointer where possible. Also, replace most occurrences of pr_*() functions by their equivalent dev_*() functions, reusing the pmc->dev pointer. It's not possible to get completely rid of the global variable because some of the public API that this driver exposes still relies on it. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Make tegra_powergate_is_powered() a local functionJon Hunter1-1/+1
Now there are no more external users of tegra_powergate_is_powered(), make this a local function. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25soc/tegra: pmc: Add missing kerneldocThierry Reding1-0/+6
Some of the fields in struct tegra_pmc had not been documented when they were added. Add the missing kerneldoc. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Sort includes alphabeticallyThierry Reding1-5/+5
This will make it easier to insert new includes in the right place in subsequent patches. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com>
2019-01-25soc/tegra: pmc: Use TEGRA186_ prefix for GPIO namesThierry Reding1-1/+1
The new prefix allows the GPIOs to be uniquely identified on a per-chip basis, which makes it easier to distinguish Tegra186 specific GPIOs from those of later chips such as Tegra194 which supports a very different set of GPIOs. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25soc/tegra: fuse: Fix typo in tegra210_init_speedo_dataJoseph Lo1-1/+1
Fix typo when reading SoC speedo value from fuse SoC speedo register. Reported-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25soc/tegra: fuse: Fix illegal free of IO base addressTimo Alho1-3/+9
On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot: [ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]--- Fix this by retaining the value of fuse->base until driver has successfully probed. Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-12-31Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-37/+441
Pull ARM SoC driver updates from Olof Johansson: "Misc driver updates for platforms, many of them power related. - Rockchip adds power domain support for rk3066 and rk3188 - Amlogic adds a power measurement driver - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1) - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7 - Broadcom fixes suspend/resume with Thumb2 kernels, and improves stability of a handful of firmware/platform interfaces - PXA completes their conversion to dmaengine framework - Renesas does a bunch of PM cleanups across many platforms - Tegra adds support for suspend/resume on T186/T194, which includes some driver cleanups and addition of wake events - Tegra also adds a driver for memory controller (EMC) on Tegra2 - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60 and misc cleanups across several platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: at91: add support in soc driver for new SAM9X60 ARM: at91: add support in soc driver for LPDDR2 SiP memory: omap-gpmc: Use of_node_name_eq for node name comparisons bus: ti-sysc: Check for no-reset and no-idle flags at the child level ARM: OMAP2+: Check also the first dts child for hwmod flags soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency soc: imx: gpc: Increase GPC_CLK_MAX to 7 soc: renesas: rcar-sysc: Fix power domain control after system resume soc: renesas: rcar-sysc: Merge PM Domain registration and linking soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B} dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1 dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1 dt-bindings: sram: Add Allwinner suniv F1C100s soc: sunxi: sram: Add support for the H5 SoC system control soc: sunxi: sram: Enable EMAC clock access for H3 variant soc: imx: gpcv2: add support for i.MX8MQ SoC soc: imx: gpcv2: move register access table to domain data soc: imx: gpcv2: prefix i.MX7 specific defines dmaengine: pxa: make the filter function internal ...
2018-12-14soc/tegra: pmc: Drop SMP dependency from CPU APIsJon Hunter1-2/+0
When CONFIG_SMP is disabled, the tegra clk driver now fails to build: drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’: drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration] cpu_pwr_status = tegra_pmc_cpu_is_powered(1) || ^ Fix the above error by removing the CONFIG_SMP ifdef around the declaration around the PMC CPU APIs because although these are not needed for non-SMP configurations, there is no harm in including these for non-SMP builds either. Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-28soc/tegra: pmc: Add initial Tegra194 wake eventsThierry Reding1-0/+8
Tegra194 supports 96 wake events in total. Many of them are never used, so only the most common ones (RTC alarm and power key) are currently defined. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-28soc/tegra: pmc: Add initial Tegra186 wake eventsThierry Reding1-0/+8
Tegra186 support 96 wake events in total. Many of them are never used, so only the most common ones (RTC alarm and power key) are currently defined. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-28soc/tegra: pmc: Add wake event supportThierry Reding1-0/+225
The power management controller has top-level controls that allow certain interrupts (such as from the RTC or a subset of GPIOs) to wake the system from sleep. Implement infrastructure to support these wake events. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-28soc/tegra: pmc: Add Tegra194 supportThierry Reding1-1/+65
The PMC controller on Tegra194 has a couple of new I/O pads and drops others compared to Tegra186. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-22soc/tegra: pmc: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-11/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-22soc/tegra: Don't leak device tree node referenceYangtao Li1-1/+5
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_tegra() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> [treding: slightly rewrite to avoid inline comparison] Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08soc/tegra: pmc: Drop locking from tegra_powergate_is_powered()Dmitry Osipenko1-7/+1
This fixes splats like the one below if CONFIG_DEBUG_ATOMIC_SLEEP=y and machine (Tegra30) booted with SMP=n or all secondary CPU's are put offline. Locking isn't needed because it protects atomic operation. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 4.18.0-next-20180821-00180-gc3ebb6544e44-dirty #823 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [<c01134f4>] (unwind_backtrace) from [<c010db2c>] (show_stack+0x20/0x24) [<c010db2c>] (show_stack) from [<c0bd0f3c>] (dump_stack+0x94/0xa8) [<c0bd0f3c>] (dump_stack) from [<c0151df8>] (___might_sleep+0x13c/0x174) [<c0151df8>] (___might_sleep) from [<c0151ea0>] (__might_sleep+0x70/0xa8) [<c0151ea0>] (__might_sleep) from [<c0bec2b8>] (mutex_lock+0x2c/0x70) [<c0bec2b8>] (mutex_lock) from [<c0589844>] (tegra_powergate_is_powered+0x44/0xa8) [<c0589844>] (tegra_powergate_is_powered) from [<c0581a60>] (tegra30_cpu_rail_off_ready+0x30/0x74) [<c0581a60>] (tegra30_cpu_rail_off_ready) from [<c0122244>] (tegra30_idle_lp2+0xa0/0x108) [<c0122244>] (tegra30_idle_lp2) from [<c0853438>] (cpuidle_enter_state+0x140/0x540) [<c0853438>] (cpuidle_enter_state) from [<c08538a4>] (cpuidle_enter+0x40/0x4c) [<c08538a4>] (cpuidle_enter) from [<c01595e0>] (call_cpuidle+0x30/0x48) [<c01595e0>] (call_cpuidle) from [<c01599f8>] (do_idle+0x238/0x28c) [<c01599f8>] (do_idle) from [<c0159d28>] (cpu_startup_entry+0x28/0x2c) [<c0159d28>] (cpu_startup_entry) from [<c0be76c8>] (rest_init+0xd8/0xdc) [<c0be76c8>] (rest_init) from [<c1200f50>] (start_kernel+0x41c/0x430) Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08soc/tegra: pmc: Add sysfs entries for reset infoSandipan Patra1-1/+128
Implement read-only reset_reason and reset_level sysfs attributes that can be used to query the reset reason and level at runtime. Signed-off-by: Sandipan Patra <spatra@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-08soc/tegra: pmc: Don't power-up XUSB power-domainsJon Hunter1-16/+0
Now that the Tegra xHCI driver manages the XUSB power-domains itself, remove the code to power-up the power-domains used by the xHCI device from the PMC driver on boot. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-10-29Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-129/+384
Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-04soc: Convert to using %pOFn instead of device_node.nameRob Herring1-6/+6
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Li Yang <leoyang.li@nxp.com> Cc: David Brown <david.brown@linaro.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-soc@vger.kernel.org Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Qiang Zhao <qiang.zhao@nxp.com> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-27soc/tegra: pmc: Implement pad configuration via pinctrlAapo Vienamo1-2/+185
Register a pinctrl device and implement get and set functions for PIN_CONFIG_LOW_POWER_MODE and PIN_CONFIG_POWER_SOURCE parameters. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Remove public pad voltage APIsAapo Vienamo1-9/+8
Make tegra_io_pad_set_voltage() and tegra_io_pad_get_voltage() static and remove the prototypes from pmc.h. Remove enum tegra_io_pad_voltage and use the defines from <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> instead. These functions aren't used outside of the pmc driver and new use cases should use the pinctrl interface instead. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Use X macro to generate IO pad tablesAapo Vienamo1-106/+127
Refactor the IO pad tables into macro tables so that they can be reused to generate pinctrl pin descriptors. Also add a name field which is needed by pinctrl. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Implement tegra_io_pad_is_powered()Aapo Vienamo1-0/+15
Implement a function to query whether a pad is in deep power down mode. This is needed by the pinctrl callbacks. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Factor out DPD register bit calculationAapo Vienamo1-3/+17
Factor out the the code to calculate the correct DPD register and bit number for a given pad. This logic will be needed to query the status register. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Fix pad voltage configuration for Tegra186Aapo Vienamo1-16/+39
Implement support for the PMC_IMPL_E_33V_PWR register which replaces PMC_PWR_DET register interface of the SoC generations preceding Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[] table and the AO_HV pad. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-08-27soc/tegra: pmc: Fix child-node lookupJohan Hovold1-1/+1
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pmc node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Fixes: 3568df3d31d6 ("soc: tegra: Add thermal reset (thermtrip) support to PMC") Cc: stable <stable@vger.kernel.org> # 4.0 Cc: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-06-09Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds1-1/+2
Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-05-08soc/tegra: pmc: Don't allocate struct tegra_powergate on stackViresh Kumar1-7/+13
With a later commit an instance of the struct device will be added to struct genpd and with that the size of the struct tegra_powergate will be over 1024 bytes. That generates following warning: drivers/soc/tegra/pmc.c:579:1: warning: the frame size of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=] Avoid such warnings by allocating the structure dynamically. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com>
2018-05-02soc/tegra: pmc: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven1-1/+2
As of_clk_get_parent_count() returns zero on failure, while of_count_phandle_with_args() might return a negative error code, this also fixes the issue of possibly using a very big number in the allocation below. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19soc/tegra: pmc: Use the new reset APIs to manage reset controllersVivek Gautam1-74/+18
Make use of of_reset_control_array_get_exclusive() to manage an array of reset controllers available with the device. Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> [p.zabel@pengutronix.de: switch to hidden reset control array] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: pmc: Pass PMC to tegra_powergate_power_up()Thierry Reding1-0/+1
tegra_powergate_sequence_power_up() makes up a struct tegra_powergate from scratch in order to reuse the same code as used by the generic PM domain implementation. However, subsequent patches will need to access the struct tegra_pmc * embedded in the powergate structure, so we need to make sure we always pass it in. Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: pmc: MBIST work around for Tegra210Peter De Schrijver1-0/+12
Apply the memory built-in self test work around when ungating certain Tegra210 power domains. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hector Martin <marcan@marcan.st> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: pmc: Add Tegra194 compatibility stringMikko Perttunen1-0/+1
The Tegra194 PMC is mostly compatible with Tegra186, including in all currently supported features. As such, add a new compatibility string but point to the existing Tegra186 SoC data for now. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08soc/tegra: Add Tegra194 SoC configuration optionMikko Perttunen1-0/+10
Add the configuration option to enable support for the Tegra194 system- on-chip. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21soc/tegra: fuse: Explicitly request DMA channel from APB DMA driverDmitry Osipenko1-1/+8
Currently fuse driver requests DMA channel from an arbitrary DMA device, it is not a problem since there is only one DMA provider for Tegra20 yet, but it may become troublesome if another provider will appear. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-21soc/tegra: fuse: Fix reading registers using DMA on Tegra20Dmitry Osipenko2-1/+4
FUSE driver doesn't configure DMA channel properly, because of it DMA transfer is never issued and tegra20_fuse_read() always return 0x0. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13soc/tegra: pmc: Consolidate Tegra186 supportThierry Reding4-175/+131
Move Tegra186 support to the consolidated PMC driver to reduce some of the duplication and also gain I/O pad functionality on the new SoC as a side-effect. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13soc/tegra: pmc: Parameterize driverThierry Reding1-54/+121
Parameterize some aspects of the driver in preparation for Tegra186 PMC support. Initially the Tegra186 driver had been split off into an extra driver, but it turns out the backwards-compatibility break isn't as bad as originally assumed, so with a little parameterization the same code can be used to keep supporting all SoC generations. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13soc/tegra: fuse: Add Tegra186 chip ID supportThierry Reding1-0/+1
The register region containing chip ID information has been relocated in Tegra186 and changed in backwards-incompatible ways. Add a compatible string to allow the driver to make the distinction. Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.