aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2020-07-16Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann1-0/+3
i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixesArnd Bergmann1-3/+5
Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-13tty: serial: qcom-geni-serial: Drop the icc bw votes in suspend for consoleRajendra Nayak1-0/+9
When using the geni-serial as console, its important to be able to hit the lowest possible power state in suspend, even with no_console_suspend. The only thing that prevents it today on platforms like the sc7180 is the interconnect BW votes, which we certainly don't need when the system is in suspend. So in the suspend handler mark them as ACTIVE_ONLY (0x3) and on resume switch them back to the ALWAYS tag (0x7) Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1594704709-26072-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-13soc: imx: select ARM_GIC_V3 for i.MX8MPeng Fan1-0/+1
Select ARM_GIC_V3, then it is able to use gic v3 driver in aarch32 mode linux on aarch64 hardware. For aarch64 mode, it not hurts to select ARM_GIC_V3. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13soc: renesas: rcar-rst: Add support for RZ/G2HMarian-Cristian Rotariu1-0/+1
Add support for RZ/G2H (R8A774E1) to the R-Car RST driver. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13soc: renesas: Identify RZ/G2HMarian-Cristian Rotariu1-0/+8
This patch adds support for identifying the RZ/G2H (r8a774e1) SoC. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13soc: renesas: Add Renesas R8A774E1 config optionMarian-Cristian Rotariu1-0/+7
Add configuration option for the RZ/G2H (R8A774E1) SoC. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13soc: renesas: rcar-sysc: Add r8a774e1 supportMarian-Cristian Rotariu5-0/+52
Add support for RZ/G2H (R8A774E1) SoC power areas to the R-Car SYSC driver. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13soc: imx: check ls1021aPeng Fan1-0/+3
fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could not use the soc driver which will break caam on ls1021a platform. So directly return if it is compatible with fsl,ls1021a. Fixes: 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx") Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13firmware: imx: Move i.MX SCU soc driver into imx firmware folderAnson Huang3-182/+0
The i.MX SCU soc driver depends on SCU firmware driver, so it has to use platform driver model for proper defer probe operation, since it has no device binding in DT file, a simple platform device is created together inside the platform driver. To make it more clean, we can just move the entire SCU soc driver into imx firmware folder and initialized by i.MX SCU firmware driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-10soc: qcom: Separate kryo l2 accessors from PMU driverIlia Lin3-0/+62
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-06Merge tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/driversArnd Bergmann3-60/+58
SoC attributes update for v5.9 1. Addition of ARM SMCCC ARCH_SOC_ID support 2. Usage of the custom soc attribute groups already supported in the infrastucture instead of device_create_file which eliminates the need for any cleanup when soc is unregistered 3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of direct __ATTR * tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: smccc: Add ARCH_SOC_ID support ARM: OMAP2: Use custom soc attribute group instead of device_create_file ARM: OMAP2: Switch to use DEVICE_ATTR_RO() soc: ux500: Use custom soc attribute group instead of device_create_file soc: ux500: Switch to use DEVICE_ATTR_RO() soc: integrator: Use custom soc attribute group instead of device_create_file soc: integrator: Switch to use DEVICE_ATTR_RO() soc: realview: Use custom soc attribute group instead of device_create_file soc: realview: Switch to use DEVICE_ATTR_RO() Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-06soc: ux500: Use custom soc attribute group instead of device_create_fileSudeep Holla1-4/+8
Commit c31e73121f4c ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-7-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-06soc: ux500: Switch to use DEVICE_ATTR_RO()Sudeep Holla1-7/+5
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-6-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-06soc: integrator: Use custom soc attribute group instead of device_create_fileSudeep Holla1-5/+11
Commit c31e73121f4c ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-5-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-06soc: integrator: Switch to use DEVICE_ATTR_RO()Sudeep Holla1-24/+16
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-4-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-06soc: realview: Use custom soc attribute group instead of device_create_fileSudeep Holla1-5/+11
Commit c31e73121f4c ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-3-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-07-06soc: realview: Switch to use DEVICE_ATTR_RO()Sudeep Holla1-24/+16
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-2-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-06-30iov_iter: Move unnecessary inclusion of crypto/hash.hHerbert Xu1-0/+1
The header file linux/uio.h includes crypto/hash.h which pulls in most of the Crypto API. Since linux/uio.h is used throughout the kernel this means that every tiny bit of change to the Crypto API causes the entire kernel to get rebuilt. This patch fixes this by moving it into lib/iov_iter.c instead where it is actually used. This patch also fixes the ifdef to use CRYPTO_HASH instead of just CRYPTO which does not guarantee the existence of ahash. Unfortunately a number of drivers were relying on linux/uio.h to provide access to linux/slab.h. This patch adds inclusions of linux/slab.h as detected by build failures. Also skbuff.h was relying on this to provide a declaration for ahash_request. This patch adds a forward declaration instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-29soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID'sChristian Hewitt1-3/+5
Correct the SoC revision and package bits/mask values for S905D3/X3 to detect a wider range of observed SoC IDs, and tweak sort order for A311D/S922X. S905X3 05 0000 0101 (SEI610 initial devices) S905X3 10 0001 0000 (ODROID-C4 and recent Android boxes) S905X3 50 0101 0000 (SEI610 later revisions) S905D3 04 0000 0100 (VIM3L devices in kernelci) S905D3 b0 1011 0000 (VIM3L initial production) Fixes commit c9cc9bec36d0 ("soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs") Suggested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200609081318.28023-1-christianshewitt@gmail.com
2020-06-28Merge tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-4/+4
Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ...
2020-06-28Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann1-3/+7
i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28Merge tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesArnd Bergmann1-4/+4
Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-24soc: qcom-geni-se: Add interconnect support to fix earlycon crashAkash Asthana1-0/+68
QUP core clock is shared among all the SE drivers present on particular QUP wrapper, the system will reset(unclocked access) if earlycon used after QUP core clock is put to 0 from other SE drivers before real console comes up. As earlycon can't vote for it's QUP core need, to fix this add ICC support to common/QUP wrapper driver and put vote for QUP core from probe on behalf of earlycon and remove vote during earlycon exit call. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reported-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-3-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-24soc: qcom: geni: Support for ICC votingAkash Asthana1-0/+82
Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1592908737-7068-2-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-24soc: qcom: rpmh-rsc: Don't use ktime for timeout in write_tcs_reg_sync()Douglas Anderson1-5/+13
The write_tcs_reg_sync() may be called after timekeeping is suspended so it's not OK to use ktime. The readl_poll_timeout_atomic() macro implicitly uses ktime. This was causing a warning at suspend time. Change to just loop 1000000 times with a delay of 1 us between loops. This may give a timeout of more than 1 second but never less and is safe even if timekeeping is suspended. NOTE: I don't have any actual evidence that we need to loop here. It's possibly that all we really need to do is just read the value back to ensure that the pipes are cleaned and the looping/comparing is totally not needed. I never saw the loop being needed in my tests. However, the loop shouldn't hurt. Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Fixes: 91160150aba0 ("soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync()") Reported-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200528074530.1.Ib86e5b406fe7d16575ae1bb276d650faa144b63c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-24soc: imx8m: fix build warningPeng Fan1-1/+1
Fix the build warning with x86_64-randconfig >> drivers/soc/imx/soc-imx8m.c:150:34: warning: unused variable >> 'imx8_soc_match' [-Wunused-const-variable] static const struct of_device_id imx8_soc_match[] = { ^ Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23soc: qcom: smd-rpm: Add msm8994 compatibleKonrad Dybcio1-0/+1
Add the compatible for the RPM in msm8994. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200602200407.320908-1-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add SM8250 entry to soc_id arrayDmitry Baryshkov1-0/+1
Add an entry for SM8250 SoC. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-4-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add file with SoC info format versionDmitry Baryshkov1-0/+3
To ease debugging socinfo driver for newer chips add debugfs file returning SoC info format version. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: fix printing of pmic_modelDmitry Baryshkov1-1/+4
Print sensible string instead of just "(null)" for unknown PMIC models. Also as we are at it, do not let debugfs handler access past pmic_models array. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: qcom: socinfo: add support for newer socinfo dataDmitry Baryshkov1-0/+55
Add support for newer Qualcomm SoC info structures (up to version 0.15). Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200525164817.2938638-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-23soc: imx8m: Correct i.MX8MP UID fuse offsetAnson Huang1-2/+6
Correct i.MX8MP UID fuse offset according to fuse map: UID_LOW: 0x420 UID_HIGH: 0x430 Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver") Fixes: 18f662a73862 ("soc: imx: Add i.MX8MP SoC driver support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23soc: imx: scu: use devm_kasprintfPeng Fan1-26/+11
Use devm_kasprintf to simplify code Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23drivers: soc: Add MSM8936 SMD RPM compatibleKonrad Dybcio1-0/+1
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20200613072745.1249003-4-vincent.knecht@mailoo.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh: Update rpmh_invalidate function to return voidMaulik Shah1-3/+1
Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh: Allow RPMH on ARM SoCLina Iyer1-1/+1
Remove config restriction for RPMH on ARM64 platforms only. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/1590750158-20661-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: qcom: rpmh-rsc: Set suppress_bind_attrs flagMaulik Shah1-0/+1
rpmh-rsc driver is fairly core to system and should not be removable once its probed. However it allows to unbind driver from sysfs using below command which results into a crash on sc7180. echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind Lets prevent unbind at runtime by setting suppress_bind_attrs flag. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-22soc: mediatek: cmdq: add set event functionDennis YC Hsieh1-0/+15
Add set event function in cmdq helper functions to set specific event. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1592749115-24158-12-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-06-22soc: mediatek: cmdq: export finalize functionDennis YC Hsieh1-5/+2
Export finalize function to client which helps append eoc and jump command to pkt. Let client decide call finalize or not. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/1592749115-24158-9-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-06-22soc: mediatek: cmdq: add assign functionDennis YC Hsieh1-1/+23
Add assign function in cmdq helper which assign constant value into internal register by index. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1592749115-24158-3-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-06-22soc: qcom: socinfo: Add socinfo entry for SDM630Konrad Dybcio1-0/+1
This patch adds missing soc ID for SDM630. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200622075749.21925-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-18soc: xilinx: Fix error code in zynqmp_pm_probe()Dan Carpenter1-1/+1
This should be returning PTR_ERR() but it returns IS_ERR() instead. Fixes: ffdbae28d9d1 ("drivers: soc: xilinx: Use mailbox IPI callback") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200605110020.GA978434@mwanda
2020-06-15soc: ti: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-08Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds3-166/+0
Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
2020-06-08Merge branch 'fixes-v5.7' into fixesTony Lindgren5-12/+22
2020-06-07Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds2-36/+7
Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-04Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds2-1/+51
Pull RISC-V updates from Palmer Dabbelt: - The remainder of the code necessary to support the Kendryte K210: * Support for building device trees into the kernel, as the K210 doesn't have a bootloader that provides one * A K210 device tree and the associated defconfig update * Support for skipping PMP initialization on systems that trap on PMP accesses rather than treating them as WARL - Support for KGDB - Improvements to text patching - Some cleanups to the SiFive L2 cache driver * tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: soc: sifive: l2 cache: Mark l2_get_priv_group as static soc: sifive: l2 cache: Eliminate an unsigned zero compare warning riscv: Add support to determine no. of L2 cache way enabled riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure riscv: Use text_mutex instead of patch_lock riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation riscv: Remove the 'riscv_' prefix of function name riscv: Add SW single-step support for KDB riscv: Use the XML target descriptions to report 3 system registers riscv: Add KGDB support kgdb: Add kgdb_has_hit_break function RISC-V: Skip setting up PMPs on traps riscv: K210: Update defconfig riscv: K210: Add a built-in device tree riscv: Allow device trees to be built into the kernel
2020-06-04Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds38-338/+1558
Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.