aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/soundwire/bus.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-04soundwire: core: add device tree support for slave devicesSrinivas Kandagatla1-0/+2
This patch adds support to parsing device tree based SoundWire slave devices. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190829163514.11221-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-09-04soundwire: bus: set initial value to port_statusBard Liao1-1/+1
port_status[port_num] are assigned for each port_num in some if conditions. So some of the port_status may not be initialized. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190829181135.16049-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-23soundwire: add debugfs supportPierre-Louis Bossart1-0/+6
Add base debugfs mechanism for SoundWire bus by creating soundwire root and master-N and slave-x hierarchy. Also add SDW Slave SCP, DP0 and DP-N register debug file. Registers not implemented will print as "XX" Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190821185821.12690-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-21soundwire: bus: improve dynamic debug comments for enumerationPierre-Louis Bossart1-1/+4
update comments to provide better understanding of enumeration flows. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190806005522.22642-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-02soundwire: bus: split handling of Device0 eventsPierre-Louis Bossart1-0/+5
Assigning a device number to a Slave will result in additional events when it reports its status in a PING frame. There is no point in dealing with all the other devices in a loop, this can be done when a non-device0 event happens. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190725234032.21152-19-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27soundwire: rename/clarify MIPI DisCo propertiesPierre-Louis Bossart1-1/+1
The existing definitions are ambiguous and possibly misleading. For DP0, 'flow-control' is only relevant for the BRA protocol and should not be confused with async modes explicitly not supported for DP0, add prefix to follow MIPI DisCo definition The use of 'device_interrupts' is also questionable. The MIPI SoundWire spec defines Slave-, DP0- and DPN-level implementation-defined interrupts. Using the 'device' prefix in the last two cases is misleading, not only is the term 'device' overloaded but these properties are only valid at the DP0 and DPn levels. Rename to follow the MIPI definitions, no need to be creative here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27soundwire: rename 'freq' fieldsPierre-Louis Bossart1-2/+2
Rename all fields with 'freq' as 'clk_freq' to follow the MIPI specification and avoid confusion between bus clock and audio clocks. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-02soundwire: avoid multiple assignmentsVinod Koul1-2/+4
Modify the code to avoid multiple assignments by assigning to variable after error checks in soundwire bus. CHECK: multiple assignments should be avoided Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: more alignment fixesVinod Koul1-1/+2
Found few more issues reported checkpatch on code alignment so fix those as well in the soundwire core. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: remove empty line before/after bracesVinod Koul1-8/+0
Linux code style doesn't expect empty lines before or after braces and gives warning: CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' Fix these instances in soundwire core Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: add missing newlines in dynamic debug logsPierre-Louis Bossart1-37/+37
For some reason the newlines are not used everywhere. Fix as needed. Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: bus: remove spurious newlinePierre-Louis Bossart1-1/+0
tools complain here and the location of the newline does not improve readability. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: bus: fix boolean comparisonsPierre-Louis Bossart1-1/+1
no need for an explicit test against false reported by Coccinelle Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: bus: remove useless parenthesesPierre-Louis Bossart1-7/+7
and make the code more readable Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: bus: fix typos in commentsPierre-Louis Bossart1-2/+2
spelling mistakes Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-02soundwire: bus: fix alignment issuesPierre-Louis Bossart1-33/+33
Use Linux style Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-14soundwire: remove useless initializationsPierre-Louis Bossart1-2/+0
No need for explicit initialization of page and ssp fields, they are already zeroed with a memset. Detected with cppcheck: [drivers/soundwire/bus.c:309]: (style) Variable 'msg->page' is reassigned a value before the old one has been used. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27soundwire: Add support for multi link bank switchShreyas NC1-0/+5
In cases of multiple Masters in a stream, synchronization between multiple Master(s) is achieved by performing bank switch together and using Master methods. Add sdw_ml_bank_switch() to wait for completion of bank switch. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-27soundwire: Initialize completion for defer messagesShreyas NC1-0/+1
Deferred messages are async messages used to synchronize transitions mostly while doing a bank switch on multi links. On successful transitions these messages are marked complete and thereby confirming that all the buses performed bank switch successfully. So, initialize the completion structure for the same. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11soundwire: Add stream configuration APIsSanyog Kale1-0/+9
Add APIs for prepare, enable, disable and de-prepare stream. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11soundwire: Add bank switch routineSanyog Kale1-0/+7
SoundWire supports two registers banks. So, program the alternate bank with new configuration and then performs bank switch. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11soundwire: Add helpers for ports operationsSanyog Kale1-0/+26
Add helpers to configure, prepare, enable, disable and de-prepare ports. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-11soundwire: Add support for SoundWire stream managementSanyog Kale1-0/+1
This patch adds APIs and relevant stream data structures for initialization and release of stream. Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-01-22soundwire: Fix a signedness bugDan Carpenter1-2/+2
"ret" is an int and "buf" is a u8. sdw_read() returns negative error codes which are truncated to the u8, 0-255 range before being stored as an int. It means that "ret" can't be less than zero. Fixes: b0a9c37b0178 ("soundwire: Add slave status handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09soundwire: Fix incorrect return value checkShreyas NC1-2/+2
pm_runtime_get_sync will return negative values for error and 0 or 1 for success. Update the error check accordingly. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9d715fa005eb: ("soundwire: Add IO transfer") Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08soundwire: Fix typo in return value check of sdw_read()Wei Yongjun1-5/+5
Fix the typo, 'status' should be instead of 'status2'. Fixes: b0a9c37b0178 ("soundwire: Add slave status handling") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-08soundwire: fix sign extension when shifting buf[2] 24 placesColin Ian King1-2/+2
The buf[2] left shift by 24 bits is promoted to int (32 bit signed) and then signed-extended to unsigned long long. Hence if the upper bit to buf[2] is set then all the upper bits of addr end up as 1. Fix this by casting it to u64 before shifting it. Also replace the unsigned long long casts to u64 casts to match the same type of addr. Detected by CoverityScan, CID#1463147 ("Unintended sign extension") Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19soundwire: Add slave status handlingVinod Koul1-0/+379
Add status handling API sdw_handle_slave_status() to handle Slave status changes. Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19soundwire: Add Slave status handling helpersSanyog Kale1-0/+214
SoundWire Slaves report status to bus. Add helpers to handle the status changes. Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19soundwire: Add IO transferVinod Koul1-0/+272
SoundWire bus supports read or write register(s) for SoundWire Slave device. sdw_read() and sdw_write() APIs are provided for single register read/write. sdw_nread() and sdw_nwrite() for operations on contiguous registers. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19soundwire: Add MIPI DisCo property helpersVinod Koul1-0/+8
MIPI Discovery And Configuration (DisCo) Specification for SoundWire specifies properties to be implemented for SoundWire Masters and Slaves. The DisCo spec doesn't mandate these properties. However, SDW bus cannot work without knowing these values. The helper functions read the Master and Slave properties. Implementers of Master or Slave drivers can use any of the below three mechanisms: a) Use these APIs here as .read_prop() callback for Master and Slave b) Implement own methods and set those as .read_prop(), but invoke APIs in this file for generic read and override the values with platform specific data c) Implement ones own methods which do not use anything provided here Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19soundwire: Add Master registrationVinod Koul1-0/+124
A Master adds a SoundWire bus instance which scans the firmware provided for device description. In this patch we scan ACPI namespaces and create SoundWire Slave devices based on ACPI description Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.