aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-bcm63xx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-12spi/bcm63xx: check spi bits_per_word in spi_setupJonas Gorski1-2/+5
Instead of fixing up the bits_per_word (which the spi subsystem already does for us), check it for supported values. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: remove unused variable bs from bcm63xx_spi_setupJonas Gorski1-4/+0
It is only written, but never read. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: remove unneeded debug messageJonas Gorski1-3/+0
The spi subsystem already provides this info in a more extensive debug print except for the nsecs/bit - which wasn't calculated anyway and fixed to 0. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: remove duplicated mode bits checkJonas Gorski1-6/+0
The spi subsystem already checks the mode bits before calling setup. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: properly prepare clocks before enabling themJonas Gorski1-5/+5
Use proper clk_prepare/unprepare calls in preparation for switching to the generic clock framework. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: don't disable non enabled clocks in probe error pathJonas Gorski1-1/+1
When msg_ctl_width is set to an invalid value we try to disable the clock despite it never being enabled. Fix it by jumping to the correct label. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12spi/bcm63xx: Remove unused variableKevin Cernekee1-1/+0
This fixes the following warning: drivers/spi/spi-bcm63xx.c: In function 'bcm63xx_spi_setup': drivers/spi/spi-bcm63xx.c:157:6: warning: unused variable 'ret' Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-05spi/bcm63xx: work around inability to keep CS upJonas Gorski1-28/+106
This SPI controller does not support keeping CS asserted after sending a transfer. Since messages expected on this SPI controller are rather short, we can work around it for normal use cases by sending all transfers at once in a big full duplex stream. This means that we cannot change the speed between transfers if they require CS to be kept asserted, but these would have been rejected before anyway because of the inability of keeping CS asserted. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05spi/bcm63xx: reject transfers unable to transferJonas Gorski1-49/+42
The hardware does not support keeping CS asserted after sending one FIFO buffer worth of data, so reject transfers requiring CS being kept asserted, either between transers or for a certain time after it, or exceeding the FIFO size. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-10-17spi/bcm63xx: remove useless call to bcm63xx_spi_check_transfer()Florian Fainelli1-7/+0
Calling bcm63xx_spi_check_transfer() with a NULL argument does not do anything useful that the core spi code is not doing already, remove this superfluous call. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17spi/bcm63xx: add missing spi_master_{resume,suspend} calls to PM callbacksFlorian Fainelli1-0/+4
The PM callbacks implemented by the spi-bcm63xx driver don't call spi_master_{resume,suspend}, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17spi/bcm63xx: remove driver versionFlorian Fainelli1-3/+2
As Grant Likely reported, this does not make any sense in a mainline kernel remove that driver version string. Reported-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-25Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-5/+26
Pull MIPS fixes from Ralf Baechle: "Random fixes across the MIPS tree. The two hotspots are several bugs in the module loader and the ath79 SOC support; also noteworthy is the restructuring of the code to synchronize CPU timers across CPUs on startup; the old code recently ceased to work due to unrelated changes. All except one of these patches have sat for a significant time in linux-next for testing." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module MIPS: Malta: Delete duplicate PCI fixup. MIPS: ath79: don't hardcode the unavailability of the DSP ASE MIPS: Synchronize MIPS count one CPU at a time MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. MIPS: Fix race condition in module relocation code. MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. MIPS: MTX-1: Add udelay to mtx1_pci_idsel MIPS: ath79: select HAVE_CLK MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 MIPS: ath79: Fix number of GPIO lines for AR724[12] MIPS: Octeon: Fix broken interrupt controller code.
2012-08-17MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.Florian Fainelli1-5/+26
BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-13spi/bcm63xx: Ensure that memory is freed only after it is no longer usedGuenter Roeck1-1/+3
The call to spi_unregister_master() in the device remove function frees device memory, and with it any device local data. However, device local data is still accessed after the call to spi_unregister_master(). Acquire a reference to the SPI device and release it after cleanup is complete to solve the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/bcm63xx: fix clock configuration selectionFlorian Fainelli1-1/+1
We are currently using an inferior or equal operator for comparing the transfer frequency with the clock frequency table. Because of this, we always end up selecting 20Mhz as a frequency, due to the inequality transfer hz <= 20 Mhz being always true. Fix this by reversing the inequality, which is how the comparison should be done. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-27spi/bcm63xx: set master driver mode_bits.Florian Fainelli1-0/+1
We were not properly advertising the MODE bits supported by this driver, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-27spi/bcm63xx: don't use the stopping stateFlorian Fainelli1-11/+2
We do not need to use a flag to indicate if the master driver is stopping it is sufficient to perform spi master unregistering in the platform driver's remove function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-27spi/bcm63xx: convert to the pump message infrastructureFlorian Fainelli1-60/+89
This patch converts the bcm63xx SPI driver to use the SPI infrastructure pump message queue. Since we were previously sleeping in the SPI driver's transfer() function (which is not allowed) this is now fixed as well. To complete that conversion a certain number of changes have been made: - the transfer len is split into multiple hardware transfers in case its size is bigger than the hardware FIFO size - the FIFO refill is no longer done in the interrupt context, which was a bad idea leading to quick interrupt handler re-entrancy Tested-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-09spi: add Broadcom BCM63xx SPI controller driverFlorian Fainelli1-0/+486
This patch adds support for the SPI controller found on the Broadcom BCM63xx SoCs. Signed-off-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.