aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-fsl-spi.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-04-07spi/spi-fsl-spi: Add support for gpio chipselects for GRLIB type coresAndreas Larsson1-5/+45
This relies upon of_spi_register_master to find out which gpios to use. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for Aeroflex Gaisler GRLIB cores normally running on SPARCAndreas Larsson1-12/+86
This adds support for the mostly register-compatible SPICTRL cores from the GRLIB VHDL IP core library from Aeroflex Gaisler. They are normally running on SPARC. A different entry in of_fsl_spi_match matches this core and indicates a different hardware type that is used to set up different function pointers and special cases. The GRLIB core operates in cpu mode. The number of bits per word might be limited. There might be native chipselects selected via a slave select register. These differences to the FSL type cores, if present, are indicated by a capabilities register. Other register and function differences exists but are not relevant to the driver. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for setting a maximum number of bits per wordAndreas Larsson1-1/+7
Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Introduce a type for the driverAndreas Larsson1-7/+32
For being able to distinguishing between the regular type of cores and others with different entries in of_fsl_spi_match. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Move setting non-zero tx and rx shifts to a function accessed by a function pointerAndreas Larsson1-20/+31
Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make sure in spi_fsl_setup that chipselect becomes inactiveAndreas Larsson1-0/+4
This is needed for a device in SPI_CS_HIGH mode that otherwise could start out active for the first transaction. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make driver usable in CPU mode outside of an FSL_SOC environmentAndreas Larsson1-402/+9
This makes the spi-fsl-spi driver usable in CPU mode outside of an FSL_SOC and even an powerpc environment by moving CPM mode functionality to a separate file that is only compiled and linked in an FSL_SOC environment and adding some ifdefs to hide types and functions or provide alternatives. For devicetree probing a "clock-frequency" property is used for clock frequency instead of calls to FSL_SOC-specific functions. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-01spi/fsl: Use PTR_RET functionAlexandru Gheorghiu1-3/+1
Replaced calls to IS_ERR and PTR_ERR with PTR_RET function. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely1-2/+2
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely1-7/+7
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19spi/spi-fsl-spi: reference correct pdata in fsl_spi_cs_controlHerton Ronaldo Krzesinski1-1/+1
Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed spi device initialization of dev.parent pointer to be the master's device pointer instead of his parent. This introduced a bug in spi-fsl-spi, since its usage of spi device pointer was not updated accordingly. This was later fixed by commit 5039a86, "spi/mpc83xx: fix NULL pdata dereference bug", but it missed another spot on fsl_spi_cs_control function where we also need to update usage of spi device pointer. This change address that. Cc: stable@vger.kernel.org Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-30spi/mpc83xx: fix NULL pdata dereference bugKenth Eriksson1-1/+3
Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed device initialization to be children of the bus master, not children of the bus masters parent device. The pdata pointer used in fsl_spi_chipselect must updated to reflect the changed initialization. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-23spi: Fix WARN when removing spi-fsl-spi moduleJeff Harris1-0/+3
If CPM mode is not used, the fsl_dummy_rx variable is never allocated. When the cleanup attempts to free it, the reference count is zero and a WARN is generated. The same CPM mode check used in the initialize is applied to the free as well. Tested on 2.6.33 with the previous spi_mpc8xxx driver. The renamed spi-fsl-spi driver looks to have the same problem. Signed-off-by: Jeff Harris <jeff_harris@kentrox.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-05spi/fsl_spi: fix CPM spi driverHolger Brunck1-17/+11
This patch fixes the freescale spi driver for CPM. Without this patch SPI on CPM failed because cpm_muram_alloc_fixed tries to allocate muram in an preserved area. The error reported was: mpc8xxx_spi f0011a80.spi: can't allocate spi parameter ram mpc8xxx_spi: probe of f0011a80.spi failed with error -12 Now the driver uses of_iomap to get access to this area similar to i2c driver driver in the i2c-cpm.c which has a similar device tree node. This is tested on a MPC8247 with CPM2. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06spi: reorganize driversGrant Likely1-0/+1192
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.