aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-qup.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-08-04Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/rspi' into spi-nextMark Brown1-14/+22
2014-06-22spi: qup: Remove chip select functionAndy Gross1-27/+6
This patch removes the chip select function. Chip select should instead be supported using GPIOs, defining the DT entry "cs-gpios", and letting the SPI core assert/deassert the chip select as it sees fit. The chip select control inside the controller is buggy. It is supposed to automatically assert the chip select based on the activity in the controller, but it is buggy and doesn't work at all. So instead we elect to use GPIOs. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: qup: Add support for v1.1.1Andy Gross1-14/+22
This patch adds support for v1.1.1 of the SPI QUP controller. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21spi: qup: Fix order of spi_register_masterAndy Gross1-4/+7
This patch moves the devm_spi_register_master below the initialization of the runtime_pm. If done in the wrong order, the spi_register_master fails if any probed slave devices issue SPI transactions. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-02Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/fsl', 'spi/topic/fsl-espi' and 'spi/topic/id-const' into spi-nextMark Brown1-1/+1
2014-05-14spi: qup: Correct selection of FIFO/Block modeAndy Gross1-2/+2
This patch fixes the calculation for determining whether to use FIFO or BLOCK mode. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-07spi: qup: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-03spi: qup: Fix return value checking for pm_runtime_get_sync()Axel Lin1-1/+1
pm_runtime_get_sync() returns 1 if !CONFIG_PM_RUNTIME. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-26spi: qup: Get rid of using struct spi_qup_deviceAxel Lin1-52/+9
Current code uses struct spi_qup_device to store spi->mode and spi->chip_select settings. We can get these settings in spi_qup_transfer_one and spi_qup_set_cs without using struct spi_qup_device. Refactor the code a bit to remove spi_qup_setup(), spi_qup_cleanup(), and struct spi_qup_device. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24spi: qup: Remove module versionAxel Lin1-1/+0
The module version is unlikely to be updated, use kernel version should be enough. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: qup: Fix build error due to a typoAxel Lin1-2/+2
Fix below build error when CONFIG_PM_RUNTIME=y: C [M] drivers/spi/spi-qup.o drivers/spi/spi-qup.c: In function 'spi_qup_pm_suspend_runtime': drivers/spi/spi-qup.c:712:12: error: 'QUP_CLOCK_AUTO_GATE' undeclared (first use in this function) drivers/spi/spi-qup.c:712:12: note: each undeclared identifier is reported only once for each function it appears in drivers/spi/spi-qup.c: In function 'spi_qup_pm_resume_runtime': drivers/spi/spi-qup.c:725:13: error: 'QUP_CLOCK_AUTO_GATE' undeclared (first use in this function) make[2]: *** [drivers/spi/spi-qup.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: qup: Convert ot let spi core handle checking transfer speedAxel Lin1-14/+1
Set master->max_speed_hz then spi core will handle checking transfer speed. So we can remove the same checking in this driver. Also remove checking spi->chip_select in spi_qup_setup(), the checking is done by spi core. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: qup: Remove spi_master_put in spi_qup_removeAxel Lin1-1/+0
This driver uses devm_spi_register_master() so don't explicitly call spi_master_put() in spi_qup_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20spi: Add Qualcomm QUP SPI controller supportIvan T. Ivanov1-0/+837
Qualcomm Universal Peripheral (QUP) core is an AHB slave that provides a common data path (an output FIFO and an input FIFO) for serial peripheral interface (SPI) mini-core. SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. Cc: Alok Chauhan <alokc@codeaurora.org> Cc: Gilad Avidov <gavidov@codeaurora.org> Cc: Kiran Gunda <kgunda@codeaurora.org> Cc: Sagar Dharia <sdharia@codeaurora.org> Cc: dsneddon@codeaurora.org Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Mark Brown <broonie@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.