aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss1-2/+2
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss1-2/+4
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-25Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds17-100/+2220
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (31 commits) spi: Correct SPI clock frequency setting in spi_mpc8xxx spi/spi_s3c64xx.c: Fix continuation line formats spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK spi/dw_spi: Allow dw_spi.c to be a module spi/dw_spi: mmio code style fixups Memory-mapped dw_spi driver spi/dw_spi: fix missing export of dw_spi_remove_host spi/dw_spi: conditional transfer mode changes spi/dw_spi: remove conditional from 'poll_transfer'. spi/dw_spi: fixed a spelling typo in a warning message. spi/dw_spi: add return value to empty mrst_spi_debugfs_init() spi/dw_spi: enable platform specific chipselect. spi/dw_spi: add a FIFO depth detection spi/dw_spi: fix __init/__devinit section mismatch spi: xilinx_spi: Fix up I/O routine wrapping bogosity. spi/spi_imx: add device information by switching pr_debug() to dev_dbg() spi: update MSIOF includes spi/dw_spi: refine the IRQ mode working flow spi/dw_spi: add a missed dw_spi_remove_host() in exit sequence spi/dw_spi: bug fix in wait_till_not_busy() ...
2010-02-16spi: Correct SPI clock frequency setting in spi_mpc8xxxErnst Schwab1-2/+2
Correct SPI clock frequency division factor rounding, preventing clock rates higher than the maximum specified clock frequency being used. When specifying spi-max-frequency = <10000000> in the device tree, the resulting frequency was 11.1 MHz, with spibrg being 133333332. According to the freescale data sheet [1], the spi clock rate is spiclk = spibrg / (4 * (pm+1)) The existing code calculated pm = mpc8xxx_spi->spibrg / (hz * 4); pm--; resulting in pm = (int) (3.3333) - 1 = 2, resulting in spiclk = 133333332/(4*(2+1)) = 11111111 With the fix, pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; pm--; resulting in pm = (int) (4.3333) - 1 = 3, resulting in spiclk = 133333332/(4*(3+1)) = 8333333 Without the fix, for every desired SPI frequency that is not exactly derivable from spibrg, pm will be too small due to rounding down, resulting in a too high SPI clock, so we need a pm which is one higher. For values that are exactly derivable, spibrg will be dividable by (hz*4) without remainder, and (int) ((spibrg-1)/(hz*4)) will be one lower than (int) (spibrg)/(hz*4), which is compensated by adding 1. For these values, the fixed version calculates the same pm as the unfixed version. For all values that are not exactly derivable, spibrg will be not dividable by (hz*4) without remainder, and (int) ((spibrg-1)/(hz*4)) will be the same as (int) (spibrg)/(hz*4), and the calculated pm will be one higher than calculated by the unfixed version. References: [1] http://www.freescale.com/files/32bit/doc/ref_manual/MPC8315ERM.pdf, page 22-10 -> 1398 Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-02spi/spi_s3c64xx.c: Fix continuation line formatsJoe Perches1-6/+5
String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-02spi: spi_sh_msiof: Fixed data sampling on the correct edgeMarkus Pietrek1-9/+6
The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-22spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLKJean-Hugues Deschenes1-1/+1
dw_spi_mmio is dependent on the clock framework. This marks it as such in Kconfig. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: Allow dw_spi.c to be a moduleJean-Hugues Deschenes1-1/+1
Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: mmio code style fixupsJean-Hugues Deschenes1-4/+3
Minor code style cleanups following comments by Wolfram Sang Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21Memory-mapped dw_spi driverJean-Hugues Deschenes3-0/+153
Adds a memory-mapped I/O dw_spi platform device. Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: fix missing export of dw_spi_remove_hostFeng Tang1-0/+1
So that interface drivers could be built as modules Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: conditional transfer mode changesGeorge Shore1-0/+16
This allows the switching between transfer modes between 'transmit only', 'receive only' and 'transmit and receive' modes. Due to the design of the SPI block, changing transfer modes requires that the block be disabled; in doing so the chipselect line is inherently deasserted and (usually) the attached device discards its state. Consequentially, switching modes requires that a platform-specific chipselect function has been defined so that the chipselect is not dropped during the change. Signed-off-by: George Shore <george@georgeshore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: remove conditional from 'poll_transfer'.George Shore1-5/+2
The 'poll_transfer' function employs a conditional to test whether the transmit buffer is valid; in doing so, on a receive operation no data is clocked out, thus no data is clocked in and ultimately errors appear. This removes the conditional as the transmit function will be set to a null writer when the transmit buffer is invalid, allowing the driver to clock 0x00 out to the device to receive data from the device. Signed-off-by: George Shore <george@georgeshore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: fixed a spelling typo in a warning message.George Shore1-1/+1
Signed-off-by: George Shore <george@georgeshore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: add return value to empty mrst_spi_debugfs_init()George Shore1-0/+1
As per the function signature. Signed-off-by: George Shore <george@georgeshore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-21spi/dw_spi: add a FIFO depth detectionFeng Tang1-0/+16
FIFO depth is configurable for each implementation of DW core, so add a depth detection for those interface drivers who don't set the fifo_len explicitly Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/dw_spi: fix __init/__devinit section mismatchGrant Likely1-1/+1
Section mismatch in reference from the function dw_spi_add_host() to the function init_queue() Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: xilinx_spi: Fix up I/O routine wrapping bogosity.Paul Mundt1-4/+24
xilinx_spi presently makes some fairly questionable assumptions about I/O routines, and attempts to assign ioread32/iowrite32 and friends directly to its own internal function pointers. On many platforms these I/O routines are macros or wrappers and not actual functions on their own, resulting in things like: ERROR: "ioread32be" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "iowrite32be" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "iowrite32" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "ioread32" [drivers/spi/xilinx_spi.ko] undefined! If xilinx_spi wants to do this sort of casting, it needs to provide its own wrappers for these, or change how it does accesses completely. I've opted for the first approach, and the attached silly patch does that. If someone with the hardware available wants to give the second option a try that's ok too. In any event, the current code is broken for at least: arm, avr32, blackfin, microblaze, mn10300, and sh. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/spi_imx: add device information by switching pr_debug() to dev_dbg()Alberto Panizzo1-1/+1
Useful when debugging multiple spi channels. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: update MSIOF includesMagnus Damm1-1/+1
Update the MSIOF driver to remove the architecture speficic spi header file and add err.h. This makes the driver compile on non-SH architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/dw_spi: refine the IRQ mode working flowFeng Tang2-25/+40
Now dw_spi core fully supports 3 transfer modes: pure polling, DMA and IRQ mode. IRQ mode will use the FIFO half empty as the IRQ trigger, so each interface driver need set the fifo_len, so that core driver can handle it properly Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/dw_spi: add a missed dw_spi_remove_host() in exit sequenceFeng Tang1-0/+1
Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/dw_spi: bug fix in wait_till_not_busy()Feng Tang1-1/+1
Make the driver wait at least for 1 jiffie before issuing the warning, no matter what HZ is set to Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Add new parameter to cs callbackJassi Brar1-3/+4
Since most of the chip-selects are simply going to be like gpio_set_value, it would do good to have the same callback type so that it could simply be made to point at gpio_set_value. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Include moved headerJassi Brar1-1/+1
Header for platform specific stuff has been rename to include the SoC type. Include the new header instead. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Check before mem-region releaseJassi Brar1-1/+2
Add precautionary check before releasing memory region. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Move src_clk to local driver dataJassi Brar1-19/+17
The pointer to SPI rate source clock had better be the member of driver local data structure rather than platform specific. Also, remove definitions of variable 'sci' that are rendered useless as a consequence. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Differentiate ip and rate clockJassi Brar1-20/+8
The instance of SPI clock for controller and that used for generating signals ought to be independently handled. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/s3c64xx: Rename s3c64xx_spi_cntrlr_infoJassi Brar1-12/+12
Rename 'struct s3c64xx_spi_cntrlr_info' to lesser wordy 'struct s3c64xx_spi_info' Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi/mpc8xxx: don't check platform_get_irq's return value against zeroUwe Kleine-König1-2/+2
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Make irq a signed variable and compare irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: Add Freescale/Motorola Coldfire QSPI driverSteven King3-0/+651
Add support for the QSPI controller found some on Freescale/Motorola Coldfire MCUs. Full duplex, active high cs, spi modes 0-3 and word sizes 8-16 bits are supported. The hardware drives the MISO, MOSI and SCLK lines, but the chip selects are managed via GPIO and must be configured by the board code. The QSPI controller has an 80 byte buffer which allows us to transfer up to 16 words at a time. For transfers longer than 16 words, we split the buffer in half so we can update in one half while the controller is operating on the other half. Interrupt latencies then ultimately limits our sustained thru-put to something less than half the maximum speed supported by the part. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: make Open Firmware device id constantMárton Németh4-4/+4
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: Fix reversed args to time_before() in Freescale stmp driver.Robert P. J. Day1-1/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-01-20spi: Add SPI master driver for DaVinci/DA8xxSandeep Paulraj3-0/+1263
This patch adds support for a SPI master driver for the DaVinci series of SOCs Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds14-33/+2736
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi: spi_txx9.c: use resource_size() spi: spi_sh_sci.c: use resource_size() spi: spi_mpc8xxx.c: use resource_size() spi: spi_bfin5xx.c: use resource_size() spi: atmel_spi.c: use resource_size() spi: Add s3c64xx SPI Controller driver atmel_spi: fix dma addr calculation for len > BUFFER_SIZE spi_s3c24xx: add FIQ pseudo-DMA support spi: controller driver for Designware SPI core spidev: add proper section markers spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17spi: spi_txx9.c: use resource_size()hartleys1-4/+2
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_sh_sci.c: use resource_size()hartleys1-1/+1
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_mpc8xxx.c: use resource_size()hartleys1-1/+1
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_bfin5xx.c: use resource_size()hartleys1-1/+1
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: atmel_spi.c: use resource_size()hartleys1-1/+1
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: Add s3c64xx SPI Controller driverJassi Brar3-0/+1204
Each SPI controller has exactly one CS line and as such doesn't provide for multi-cs. We implement a workaround to support multi-cs by _not_ configuring the mux'ed CS pin for each SPI controller. The CS mechanism is assumed to be fully machine specific - the driver doesn't even assume some GPIO pin is used to control the CS. The driver selects between DMA and POLLING mode depending upon the xfer size - DMA mode for xfers bigger than FIFO size, POLLING mode otherwise. The driver has been designed to be capable of running SoCs since s3c64xx and till date, for that reason some of the register fields have been passed via, SoC specific, platform data. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17atmel_spi: fix dma addr calculation for len > BUFFER_SIZEBen Nizette1-2/+2
If len > BUFFER_LEN and !xfer->rx_buf we end up calculating the tx buffer address as *tx_dma = xfer->tx_dma + xfer->len - BUFFER_SIZE; which is constant; i.e. we just send the last BUFFER_SIZE data over again until we've reached the right number of bytes. This patch gets around this by using the /requested/ length when calculating addresses. Note there's no way len != *plen when we calculate the rx buffer address but conceptually we should be using *plen and I don't want someone to come through later, see the calculations for rx and tx are different and "clean up" back to what we had. Signed-off-by: Ben Nizette <bn@niasdigital.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi_s3c24xx: add FIQ pseudo-DMA supportBen Dooks5-14/+390
Add pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver to get DMA-like performance where there are either no free DMA channels or when doing transfers that required both TX and RX data paths. Since this patch requires the addition of an assembly file to hold the FIQ code, we rename the module (instead of adding a rename of the .c file to this patch). We expect most users are loading this via udev and thus there should be no change to the userland configuration. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: controller driver for Designware SPI coreFeng Tang4-0/+1125
Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spidev: add proper section markersMike Frysinger1-8/+8
The driver already uses __devexit_p() in the structure, but looks like actual __dev{init,exit} markings were forgotten. The spidev_spi driver also needs renaming to include a "_driver" suffix to avoid section mismatch warnings. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spidev: use DECLARE_BITMAP instead of declaring the arrayThadeu Lima de Souza Cascardo1-1/+1
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan2-2/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds14-219/+2418
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
2009-12-13spi: fix probe/remove section markingsGrant Likely1-3/+3
Probe/remove functions need to be marked as __devinit and __devexit (not __init an __exit) to prevent trying to run code that has been discarded. This patch fixes the spi_imx driver to mark probe and remove correctly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-13Add OMAP spi100k driverCory Maccarrone3-0/+642
This change adds the OMAP SPI 100k driver created by Fabrice Crohas <fcrohas@gmail.com>. This SPI bus is found on OMAP7xx-series smartphones, and for many, the touchscreen is attached to this bus. The lion's share of the work was done by Fabrice on this driver -- I am merely porting it from the Linwizard project on his behalf. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.