aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/spmi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-18igb: do not re-init SR-IOV during probeStefan Assmann1-1/+1
During driver probing the following code path is triggered. igb_probe ->igb_sw_init ->igb_probe_vfs ->igb_pci_enable_sriov ->igb_sriov_reinit Doing the SR-IOV re-init is not necessary during probing since we're starting from scratch. Here we can call igb_enable_sriov() right away. Running igb_sriov_reinit() during igb_probe() also seems to cause occasional packet loss on some onboard 82576 NICs. Reproduced on Dell and HP servers with onboard 82576 NICs. Example: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Dell Device [1028:0481] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18igb: missing rtnl_unlock in igb_sriov_reinit()Vasily Averin1-0/+1
Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18igb: Fix oops caused by missing queue pairingShota Suzuki3-3/+19
When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is set if adapter->rss_queues exceeds half of max_rss_queues in igb_init_queue_configuration(). On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of queues exceeds half of max_combined in igb_set_channels() when changing the number of queues by "ethtool -L". In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size of adapter->msix_entries[], an overflow can occur in igb_set_interrupt_capability(), which in turn leads to an oops. Fix this problem as follows: - When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver. - When increasing the size of q_vector, reallocate it appropriately. (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.) Another possible way to fix this problem is to cap the queues at its initial number, which is the number of the initial online cpus. But this is not the optimal way because we cannot increase queues when another cpu becomes online. Note that before commit cd14ef54d25b ("igb: Change to use statically allocated array for MSIx entries"), this problem did not cause oops but just made the number of queues become 1 because of entering msi_only mode in igb_set_interrupt_capability(). Fixes: 907b7835799f ("igb: Add ethtool support to configure number of channels") CC: stable <stable@vger.kernel.org> Signed-off-by: Shota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-18net: sched: drop all special handling of tx_queue_len == 0Phil Sutter5-17/+9
Those were all workarounds for the formerly double meaning of tx_queue_len, which broke scheduling algorithms if untreated. Now that all in-tree drivers have been converted away from setting tx_queue_len = 0, it should be safe to drop these workarounds for categorically broken setups. Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: warn if drivers set tx_queue_len = 0Phil Sutter1-0/+3
Due to the introduction of IFF_NO_QUEUE, there is a better way for drivers to indicate that no qdisc should be attached by default. Though, the old convention can't be dropped since ignoring that setting would break drivers still using it. Instead, add a warning so out-of-tree driver maintainers get a chance to adjust their code before we finally get rid of any special handling of tx_queue_len == 0. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18staging: wilc1000: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Johnny Kim <johnny.kim@atmel.com> Cc: Rachel Kim <rachel.kim@atmel.com> Cc: Dean Lee <dean.lee@atmel.com> Cc: Chris Park <chris.park@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: caif: convert to using IFF_NO_QUEUEPhil Sutter5-5/+5
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: hsr: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: batman-adv: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: mac80211_hwsim: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: hostap: convert to using IFF_NO_QUEUEPhil Sutter1-2/+2
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dsa: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: ipvlan: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: bonding: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: 6lowpan: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: bridge: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: 8021q: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: vxlan: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: team: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: nlmon: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: loopback: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: geneve: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dummy: convert to using IFF_NO_QUEUEPhil Sutter1-2/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: veth: enable noqueue operation by defaultPhil Sutter1-0/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Identifier Locator Addressing moduleTom Herbert5-0/+252
Adding new module name ila. This implements ILA translation. Light weight tunnel redirection is used to perform the translation in the data path. This is configured by the "ip -6 route" command using the "encap ila <locator>" option, where <locator> is the value to set in destination locator of the packet. e.g. ip -6 route add 3333:0:0:1:5555:0:1:0/128 \ encap ila 2001:0:0:1 via 2401:db00:20:911a:face:0:25:0 Sets a route where 3333:0:0:1 will be overwritten by 2001:0:0:1 on output. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Add inet_proto_csum_replace_by_diff utility functionTom Herbert2-0/+15
This function updates a checksum field value and skb->csum based on a value which is the difference between the old and new checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Change pseudohdr argument of inet_proto_csum_replace* to be a boolTom Herbert18-36/+38
inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates the checksum field carries a pseudo header. This argument should be a boolean instead of an int. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17lwt: Add support to redirect dst.inputTom Herbert4-3/+98
This patch adds the capability to redirect dst input in the same way that dst output is redirected by LWT. Also, save the original dst.input and and dst.out when setting up lwtunnel redirection. These can be called by the client as a pass- through. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: Fix sparse warning in vnic_devcmd_init().David S. Miller1-1/+1
>> drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: sparse: incorrect type in assignment (different address spaces) drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: expected void *res drivers/net/ethernet/cisco/enic/vnic_dev.c:1095:13: got void [noderef] <asn:2>* Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17mlx5e: Fix sparse warnings in mlx5e_handle_csum().David S. Miller1-1/+1
>> drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: sparse: incorrect type in argument 1 (different base types) drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: expected restricted __sum16 [usertype] n drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: got restricted __be16 [usertype] check_sum Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17inet: Move VRF table lookup to inlined functionDavid Ahern2-9/+25
Table lookup compiles out when VRF is not enabled. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Fix docbook warning for IFF_VRF_MASTER enumDavid Ahern1-0/+1
kbuild test robot reported: tree: git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master head: d52736e24fe2e927c26817256f8d1a3c8b5d51a0 commit: 4e3c89920cd3a6cfce22c6f537690747c26128dd [751/762] net: Introduce VRF related flags and helpers reproduce: make htmldocs >> Warning(include/linux/netdevice.h:1293): Enum value 'IFF_VRF_MASTER' not described in enum 'netdev_priv_flags' Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Updates to netif_index_is_vrfDavid Ahern1-1/+11
As Eric noted netif_index_is_vrf is not called with rcu_read_lock held, so wrap the dev_get_by_index_rcu in rcu_read_lock and unlock. If VRF is not enabled or oif is 0 skip the device lookup. In both cases index cannot be the VRF master. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support RX CHECKSUM_COMPLETEAchiad Shochat3-12/+43
Only for packets with first ethertype set to IPv4/6 for now. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support ethtool get/set_pauseparamAchiad Shochat3-0/+85
Only rx/tx pause settings. Autoneg setting is currently not supported. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Ethtool link speed setting fixesAchiad Shochat3-27/+23
- Port speed settings are applied by the device only upon port admin status transition from DOWN to UP. So we enforce this transition regardless of the port's current operation state (which may be occasionally DOWN if for example the network cable is disconnected). - Fix the PORT_UP/DOWN device interface enum - Set the local_port bit in the device PAOS register - EXPORT the PAOS (Port Administrative and Operational Status) register set/query access functions. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: HW LRO changes/fixesAchiad Shochat3-4/+5
- Change the maximum LRO session size from 16KB to 64KB - Reduce the LRO session timeout from 512us to 32us in order to reduce the TCP latency of non-LRO'ed flows. - Fix skb_shinfo(skb)->gso_size and set skb_shinfo(skb)->gso_type. - Fix a bug accessing un-initialized mdev pointer. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support smaller RX/TX ring sizesAchiad Shochat1-2/+2
We un-intentionally limited the minimum rings size too much. TX minimum ring size reduced from 128 to 64. RX minimum ring size reduced from 128 to 2. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Add ethtool RSS configuration optionsAchiad Shochat3-11/+74
- get_rxfh_key_size - get_rxfh_indir_size - get/set_rxfh indirection table and RSS Toeplitz hash key - get_rxnfc Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Make RSS indirection table size a constantAchiad Shochat2-35/+30
The indirection table size was defined by a variable that was actually assigned a constant value. Since we do not have any forseen intension to make it configurable we simply made it a constant. We also limit the number of channels such that the RSS indirection table could always populate all RX rings. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Have a single RSS Toeplitz hash keyAchiad Shochat2-1/+5
No need to generate a unique key per TIR. Generating a single key per netdev and copying it to all its TIRs. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: add devcmd2Govindarajulu Varadarajan7-12/+222
devcmd is an interface for driver to communicate with fw/adaptor. It involves writing data to hardware registers and waiting for the result. This mechanism does not scale well. The queuing of "no wait" devcmds is done in firmware memory rather than on the host. Firmware memory is a rather more scarce and valuable resource than host memory. A devcmd storm from one vf can disrupt the service on other pf/vf. The lack of flow control allows for possible denial of server from one VM to another. Devcmd2 uses work queue to post the devcmds, just like tx work queue. This allows better flow control. Initialize devcmd2, if fails we fall back to devcmd1. Also change the driver version. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: add devcmd2 resourcesGovindarajulu Varadarajan4-0/+42
Add devcmd resources to vnic_res_type. Add data types used by devcmd. Signed-off-by: N V V Satyanarayana Reddy <nalreddy@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: use netdev_<foo> or dev_<foo> instead of pr_<foo>Govindarajulu Varadarajan6-31/+54
pr_info does not give any details about the interface involved. This patch uses netdev_info for printing the message. Use dev_info where netdev is not ready. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17enic: move struct definition from .c to .h fileGovindarajulu Varadarajan2-40/+39
Some of the structure definitions are in .c file to make them private to that file. This patch moves the struct definition to .h file, So that their definitions are accessible from other files. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net: Export bpf_prog_create_from_user().David S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17ipv6: trivial whitespace fixIan Morris1-1/+2
Change brace placement to be in line with coding standards Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17rhashtable-test: extend to test concurrencyPhil Sutter1-1/+155
After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17selftests/net: test extended BPF fanout modeWillem de Bruijn1-0/+53
Test PACKET_FANOUT_EBPF by inserting a program into the the kernel with bpf(), then attaching it to the fanout group. Observe the same payload-based distribution as in the PACKET_FANOUT_CBPF test. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17selftests/net: test classic bpf fanout modeWillem de Bruijn2-12/+33
Test PACKET_FANOUT_CBPF by inserting a cBPF program that selects a socket by payload. Requires modifying the test program to send packets with multiple payloads. Also fix a bug in testing the return value of mmap() Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.