| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
|
|
The pointer buf is being set on each iteration of a for-loop and
so the initialization of buf at declaration time is redundant and
can be removed. Cleans up clang warning:
drivers/staging/fbtft/fb_uc1701.c:130:6: warning: Value stored to 'buf' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the row scan order is reversed (the default) we also need to
reverse the column scan order. This was not done previously, resulting
in a mirrored display.
Also add support for 180 degree display rotation, in which case simply
disable reversed row and column scan order.
Tested on an Adafruit 0.96" mini Color OLED display.
Signed-off-by: Johannes H. Jensen <joh@pseudoberries.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sparse was complaning about an incorrect type cast:
drivers/staging/fbtft/fbtft-bus.c:60:1: warning: incorrect type in assignment (different base types)
drivers/staging/fbtft/fbtft-bus.c:60:1: expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/staging/fbtft/fbtft-bus.c:60:1: got restricted __be16 [usertype] <noident>
drivers/staging/fbtft/fbtft-bus.c:60:1: warning: incorrect type in assignment (different base types)
drivers/staging/fbtft/fbtft-bus.c:60:1: expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/staging/fbtft/fbtft-bus.c:60:1: got restricted __be16 [usertype] <noident>
The solution is to add an extra parameter to the macro to
differentiate between buffer type and data type.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alfonso Lima Astor <alfonsolimaastor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Parentheses are not needed around the right hand side of an assignment.
This patch is done using Coccinelle:
@@
expression a, b;
@@
b =
-(
a
-)
Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
txbuf16 is being initialized at declaration time and then later
set to another value without it being read inbetween, hence making
the initialization redundant. Fix this by setting txbuf16 just
the once. Also clean up some incorrect indentations. Cleans up
clang build warning:
warning: Value stored to 'txbuf16' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"val" can be negative, so we'd write before the start of the
par->gpio.db[] array.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't populate array gamma_par_mask on the stack but instead make it
static. Makes the object code smaller by 148 bytes:
Before:
text data bss dec hex filename
2993 1104 0 4097 1001 drivers/staging/fbtft/fb_st7789v.o
After:
text data bss dec hex filename
2757 1192 0 3949 f6d drivers/staging/fbtft/fb_st7789v.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Parentheses added to avoid operator precedence issues.
Signed-off-by: Rishiraj Manwatkar <manwatkar@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fix the following sparse warning:
drivers/staging/fbtft/fbtft-io.c:74:29: warning: incorrect type in assignment
(different base types) drivers/staging/fbtft/fbtft-io.c:74:29: expected
unsigned long long [unsigned] [long] [long long] [usertype] <noident>
drivers/staging/fbtft/fbtft-io.c:74:29: got restricted __be64 [usertype]
<noident>
Signed-off-by: Jandy Gou <gouqingsong@goodix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Balance if/else braces as recommended by checkpatch.pl
Signed-off-by: Laurence Rochfort <laurence.rochfort@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify the code indentations to fix the checkpatch issues.
Signed-off-by: Christophe Colin <popscolin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sparse spits out a warning that a __be16 was being assigned to a u16.
Change the type of txbuf16 to __be16 b/c it's a restricted type and
prevents mixing endianness.
Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch replaces bit shifting on 1 with the BIT(x) macro.
This was done with coccinelle:
@@
constant c;
@@
-1 << c
+BIT(c)
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a single string literal as the fmt argument passed to dev_err()
instead of multiple string literals split with an embedded backslash
character.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of new helper fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of new helper fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Factor out setting DC GPIO and writing buffer content to helper
fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The default implementation of write_register keeps DC low for the first
byte only. SH1106 requires DC to be low for all bytes of a multi-byte
command. To deal with this limitation we currently use a separate call
to write_reg for each single command byte what is not really efficient.
Therefore override the default implementation of write_register with an
own one which keeps DC low for all bytes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are drivers like fb_sh1106 which allocate a txbuf less than 1 KiB.
In this case the message would include "0 KiB buffer memory" what
doesn't make sense and in general I doubt that there is any benefit in
informing the user about allocation of a very small buffer.
Therefore omit this message part if the buffer has less than 1 KiB.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for the SH1106 OLED controller chip.
It's similar to the SSD1306, however it supports only a subset of
commands and the internal video memory has a different width.
Major differences:
- Internal video memory has a width of 132 pixels
- Only a subset of commands is supported
- Only page addressing mode is supported, no support for vertical and
horizontal addressing
- SPI frequency limited to 2 MHz according to the datasheet
Successfully tested with a 1.3" OLED display with this chip and
SPI interface.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merged two if conditionals into a single one, since they had exactly
the same condition.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following formatting issues:
WARNING: Avoid unnecessary line continuations
Signed-off-by: Cezary Gapinski <gapalinux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using const reduces data size.
$ size drivers/staging/fbtft/built-in.o*
text data bss dec hex filename
89909 41584 2928 134421 20d15 drivers/staging/fbtft/built-in.o.new
88053 43392 2928 134373 20ce5 drivers/staging/fbtft/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This allows making some of the actual arrays const.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Running make C=1 M=drivers/staging/fbtft reports warnings about conversion
from __be16 to unsigned short. Change the type of the variables being
assigned into __be16 to remove those warnings.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__be16 type variables should be used with return value of macro
cpu_to_be16()
Signed-off-by: Julián de Gortari <kiototeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove blank line before closing brace to fix the checkpatch
issue blank lines aren't necessary before a close brace '}'.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Indent code to match alignment with open parentheses, to
fix the checkpatch issue alignment should match open parenthesis.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return value of strlcpy() is not checked. Name string is silently
truncated if longer that SPI_NAME_SIZE, whilst not detrimental to
the program logic it would be nice to notify the user. Module is
currently quite verbose, adding extra pr_warn() calls will not overly
impact this verbosity.
Check return value from call to strlcpy(). If source string is
truncated call pr_warn() to notify user.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current call to strncmp() uses a magic number. There is a compile
time constant defined for this buffer, included and used already at
other sites in the file.
Remove magic number. Replace with pre-existing compile time constant.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Module copies a user supplied string (module parameter) into a buffer
using strncpy() and does not check that the buffer is null terminated.
Replace call to strncpy() with call to strlcpy() ensuring that the
buffer is null terminated.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Having a local variable of 1024 bytes on 64-bit architectures is a bit
too much, and I ran into this warning while trying to see what functions
use the largest stack:
drivers/staging/fbtft/fbtft-sysfs.c: In function 'store_gamma_curve':
drivers/staging/fbtft/fbtft-sysfs.c:132:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
As there is no need for 64-bit gamma values (on 32-bit architectures,
we don't use those either), I'm changing the type from 'unsigned long'
to 'u32' here, which cuts the required space in half everywhere.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following formatting issues:
CHECK: Alignment should match open parenthesis
Signed-off-by: Umang Raghuvanshi <u@umangis.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following errors:
Use 4 digit octal (0777) not decimal permissions
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are multiple entries for ili9225 display defined in
flexfb_chip_table array. remove duplicate entries and
keep single entry.
Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor write_vmem() for sake of readability.
While here, fix indentation in one comment.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is 64x48 display exists. In order to support that set multiplexer
to 48 pixels and window address to proper position in the graphic display
data RAM.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kstrto*() functions return proper error code.
Do propogate it to the user.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need to duplicate what SPI core already does, i.e. mapping buffers
for DMA capable transfers.
Remove all related pices of code.
Note, that code, besides its redundancy, was buggy: DMA address potentially can
be 0, SPI slave device has nothing to do with DMA capable device properties and
DMA mask in particular.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First of all, fbtft in current state doesn't allow to override GPIOs to be
optional, like "reset" one. It might be a bug somewhere, but rather out of
scope of this fix.
Second, not all GPIOs available on the board would be SoC based, some of them
might sit on I2C GPIO expanders, for example, on Intel Edison/Arduino, and thus
any communication with them might sleep.
Besides that using udelay() and mdelay() is kinda resource wasteful.
Summarize all of the above, convert fbtft_reset() function to non-atomic
variant by using gpio_set_value_cansleep(), usleep_range(), and msleep().
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Following error detected by checkpatch.pl:
ERROR: Use 4 digit octal (0777) not decimal permissions
Signed-off-by: Stefano Manni <stefano.manni@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These changes where identified by checkpatch.pl as needed changes to
align the code with the linux development coding style. The several
lines of text where aligned with the precending parenthesis.
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl warning
WARNING: line over 80 characters
Signed-off-by: Maninder Singh <maninder.s2@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ERROR: Use 4 digit octal (0777) not decimal permissions
This error was detected by checkpatch.pl
Signed-off-by: Nadim Almas <nadim.902@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
$
After this patch:
$ modinfo drivers/staging/fbtft/flexfb.ko | grep alias
alias: platform:flexpfb
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a patch to the fb_agm1264k-fl.c file that fixes up the following
issue:
WARNING: Too many leading tabs - consider code refactoring
Add new function iterate_diffusion_matrix() to refactor a piece of code
inside write_vmem().
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These arrays use -1, -2, and -3 as initiators for various types of
writes to initialize hardware.
No values are used that conflict with using these arrays as s16
instead of int and reducing overall data is good.
$ size drivers/staging/fbtft/built-in.o*
text data bss dec hex filename
116120 32872 4152 153144 25638 drivers/staging/fbtft/built-in.o.new
116104 36344 6200 158648 26bb8 drivers/staging/fbtft/built-in.o.old
Miscellaneous:
o Realign some of the arrays to make reading a bit easier
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Linus Torvalds
Colin Ian King
Johannes H. Jensen
Greg Kroah-Hartman
Alfonso Lima Astor
Aastha Gupta
Dan Carpenter
Rishiraj Manwatkar
Jandy Gou
Laurence Rochfort
Christophe Colin
Alex Wilson
Arushi Singhal
Alexander Kapshuk
Heiner Kallweit
Narcisa Ana Maria Vasile
Cezary Gapinski
Joe Perches
Anthony Brandon
Julián de Gortari
Gargi Sharma
Tobin C. Harding
Umang Raghuvanshi
Arnd Bergmann
Abdul Rauf
Amitesh Singh
Andy Shevchenko
Stefano Manni
Scott Matheina
Maninder Singh
Nadim Almas
Javier Martinez Canillas
Gustavo A. R. Silva